Quantum Dlt S4 Users Manual Product

2015-07-28

• Contents
• Figures
• Tables
• Preface
• Product Overview
  • Storage Capacity and Transfer Rates
  • Tape Drive Models
  • Tape Drive Features
  • Maximum Data Transfer Rate
  • Functional Specifications
  • Tape Drive Technology
  • Tape Drive Components
  • Interface Types
    • Host Interface
    • Physical Characteristics
• Before You Begin
  • Warranty Note
  • Safety Precautions
  • Tape Drive Handling and Storage Guidelines
  • Electrostatic Discharge Protection
  • Pre-Installation Guidelines
• Cartridges
  • Choosing Compatible Cartridges
  • Using Unsupported Cartridges
  • Backward-read Compatibility Transfer Rate
  • Cartridge Handling and Storage Guidelines
  • Inspecting a Cartridge
  • Write-protecting a Cartridge
  • Loading a Cartridge
  • Unloading a Cartridge
  • DLTSage WORM
    • DLTSage WORM Features
    • Formatting a Cartridge as DLTSage WORM
• Specifications
  • Physical Specifications
  • Dimensions and Weights
  • Electromagnetic Field Specifications
    • Electromagnetic Emissions
    • Electromagnetic Interference and Immunity
  • Acoustic Noise Emissions
• Common Interface Information
  • SCSI Command Timeout
  • Rear Panel Connectors
    • Power Connector Pin Assignments
    • Loader/Library Interface Connector
• Parallel SCSI Interface
  • Rear Panel Connectors
  • SCSI Cable Connectors
  • SCSI Tape Drive Features
  • SCSI Stub and Cable Lengths
  • SCSI Connectors and Pin Assignments
• Fibre Channel Interface
  • Rear Panel Connectors
  • Fibre Channel Cable Connector
  • Fibre Channel Tape Drive Features
  • Practical Considerations
    • Hot-Swappable Cables
    • Power Usage
    • Power Cycle (Tape Drive On)
    • Failure to Obtain a Loop Address
  • Fibre Channel Speed and Topology
  • World-wide Names
• Serial Attached SCSI (SAS) Interface
  • Rear Panel Connectors
  • SAS Cable Connector
  • SAS Tape Drive Features
  • Practical Considerations
  • SAS Tape Drive Speed
  • World-wide Names
• Installing an Internal SCSI Tape Drive
  • Equipment Required
  • Installation Steps
  • Rear Panel Connectors
  • Unpacking the Tape Drive
  • Setting the SCSI ID
  • Securing the Tape Drive in the System
  • Connecting the Cables and Terminating the SCSI Bus
  • Setting TERMPWR
  • Confirming the Installation
  • Adding an Additional Device
  • Using the Loader/Library Interface Connector
• Installing an Internal Fibre Channel Tape Drive
  • Equipment Required
  • Installation Steps
  • Rear Panel Connectors
  • Unpacking the Tape Drive
  • Securing the Tape Drive in the System
  • Connecting the Cables
  • Confirming the Installation
  • Adding Additional Devices
  • Using the Loader/Library Interface Connector
• Installing an Internal SAS Tape Drive
  • Equipment Required
  • Installation Steps
  • Rear Panel Connectors
  • Unpacking the Tape Drive
  • Securing the Tape Drive in the System
  • Connecting the Cables
  • Confirming the Installation
  • Adding Additional Devices
  • Using the Loader/Library Interface Connector
• Installing the Tabletop Tape Drive
  • Equipment Required
  • Installation Steps
  • Rear Panel Connectors
  • Unpacking the Tabletop Tape Drive
  • Selecting a Location for the Tabletop Tape Drive
  • Setting the SCSI ID
  • Connecting the Tape Drive to the Host Computer and Terminating the SCSI Bus
  • Connecting the AC Power Cable
  • Confirming the Installation
  • Adding an Additional Device
  • Configuring the Tape Drive
  • Using TERMPWR
• Using the Tape Drive
  • Front Panel Controls and LEDs
    • Left LED
    • Front Panel Controls
  • Power-On Self-Test
  • Performing a Trial Backup
  • Firmware Update via the Host Interface
    • Updating Firmware Using the Host Interface
    • Creating a CUP/FUP Cartridge From Which to Update Firmware
  • Firmware Update via the Library Tape Drive Interface
  • Cleaning the Tape Drive
    • When to Clean the Tape Drive
    • Which Cleaning Cartridge to Use
    • Cleaning Cartridge Life Expectancy
    • Cleaning Cartridge Compatibility
    • Cleaning Instructions
    • Cycle Time for Cleaning Cartridge
  • Optimizing Tape Drive Performance
• Troubleshooting
  • General Troubleshooting
  • POST and SCSI Troubleshooting
  • Over Temperature Condition
• Preparing the Tape Drive for Shipping
• Diagnostic Tools
  • Accessing the Tools
  • Device Drivers
  • TapeAlert
  • Medium Auxiliary Memory
  • DLTSage
  • xTalk Management Console
  • DLTSage Dashboard and DLTSage Tape Security
• Environmental Compliance
  • WEEE and RoHS Compliance
  • Disposal of Electrical and Electronic Equipment
• Regulatory Statements
• Glossary
• Index