Queclink Wireless Solutions GL300W GPS Locator User Manual GL300W

Queclink Wireless Solutions Co.,Ltd GPS Locator GL300W

Contents

User Manual

WCDMATrackerGL300WUserManualTRACGL300WUM001Version:1.00
GL300WUserManual TRACGL300WUM001 ‐1‐ DocumentTitleGL300WUsermanualVersion1.00Date2015‐5‐25StatusReleaseDocumentControlIDTRACGL300WUM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of Queclink Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright © Queclink Wireless Solutions Ltd. 2015
GL300WUserManual TRACGL300WUM001 ‐2‐ Contents Contents............................................................................................................................................20. Revision history............................................................................................................................31. Introduction...................................................................................................................................02. Product Overview.........................................................................................................................12.1.Appearance........................................................................................................................12.2.Buttons/MiniUSBInterfaceDescription............................................................................12.3.LEDsDescription.................................................................................................................22.4.ExternalPowerInterface....................................................................................................22.4.1.ExternalDCChargerInterface...........................................................................22.4.2.ExternalBatteryInterface.................................................................................32.5.IgnitionDetection...............................................................................................................32.6.ExternalInputInterface......................................................................................................33. Getting Started..............................................................................................................................43.1. Parts List............................................................................................................................43.2. Battery Charging................................................................................................................53.3. GL300W External Cable Interface.....................................................................................53.4. Turn on/Turn off.................................................................................................................64.TroubleshootingandSafetyinfo...................................................................................................74.1. Troubleshooting.................................................................................................................74.2. Safety info..........................................................................................................................7
GL300WUserManual TRACGL300WUM001 ‐3‐ 0. Revision history RevisionDateAuthorDescriptionofchange1.002015/5/25Hazard.Zhang Initial  
SuperEasyGSMModuleUserManual TRACSuperEasyUM00101. Introduction The water resistant GL300W is a powerful GPS locator designed for lone worker, vehicle, pet and asset tracking applications. The thumb sized button makes this device ideal for applications requiring rapid notification of emergency alert or regular setting of geo-fences based on current location. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its WCDMA allows the GL300W's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.
SuperEasyGSMModuleUserManual TRACSuperEasyUM00112. Product Overview 2.1. Appearance 2.2. Buttons/Mini USB Interface Description Button /Mini USB Interface Description Power Key  TurnonGL300W TurnoffGL300Wwhenwithoutcharging.(Ifpowerkeyisenabled)Function Key  Geo‐FencemodeLong press the key to enable/disable Geo-Fence ID0  Geo‐FenceincurrentpositionmodeLong press the key to enable/disable Geo-Fence ID0. If enable Geo-Fence ID0, using the current position as the center of Geo-Fence 0.  SOSmode(default)Long press the key to active SOS alarm Mini USB interface  Connecta5VDCadaptercanpowerGL300Wandchargetheinternalbattery  Connecta3.7VLi‐ionorLi‐PolymerbatterycanpowerGL300W BackendserverdeveloperoradministratorcanusetheData_Cable_MtoconfigureGL300W
SuperEasyGSMModuleUserManual TRACSuperEasyUM00122.3. LEDs Description There are three LED in GL300W, the description as following. 2.4. External Power Interface 2.4.1. External DC Charger Interface The Pin2 on Mini-USB connector are used for charging and named as VCHG pin, It can be connected to a 5V DC power supply to power GL300W and charge the internal battery. LED Event State CELL LED Searching network Fast flash Network has been registered Slow flash Power off Dark SIM-PIN Locked Solid <LED on> is 2 Dark GPS LED GPS has fixed Solid GPS is in fixing Fast flash GPS is on and GPS data wrong Slow flash GPS is off Dark If <LED on> is 0, 150 seconds later after powers on. Dark <LED on> is 2 Dark PWR LED Power on and normal Dark Charger inserted and charging completed Solid Charger inserted and charging Fast flash Power key was pressed and prepare to power off Fast flash Abnormal Fast flash Power low alert Slow flash Power off or turn off the power light by command Dark <LED on> is 2 Dark
SuperEasyGSMModuleUserManual TRACSuperEasyUM00132.4.2. External Battery Interface The Pin 8 on Mini-USB connector is for external battery and named as EXTBAT pin, It can be connected to 3.7V Li-ion or Li-Polymer battery to power GL300W. 2.5. Ignition Detection The Pin 7 on Mini-USB connector is for ignition detection when GL300W is used in vehicle tracking application, It is named as IGN_IND pin. AnothereasywayistoconnectPIN7toapoweroutputinthefuseboxofthevehiclewhichisonlyenabledafterthevehicleisignitionon.Forexample:thepoweroutputforradioFM. 2.6. External Input Interface The Pin 5 on Mini-USB connector is a negative trigger input in newer hardware version, It is named as NSW pin.
SuperEasyGSMModuleUserManual TRACSuperEasyUM0014Fornegativetriggerinputtheelectricalconditionsare:LogicalStateElectricalStateActive0Vto0.8VInactive1.7Vto32VorOpen An input example is shown as following figures: Example of NSW pin connect to a panic button 3. Getting Started 3.1. Parts List Name PictureRemarkGL300WLocaterTheWCDMA/GPRS/GPSlocator.AC‐DCPowerAdapter(Standardaccessory)ItisusedtochargetheinternalbatteryofGL300W.
SuperEasyGSMModuleUserManual TRACSuperEasyUM0015GL300WDataCable(Optionalaccessory)ItistheUSBdatacablewhichcanbeusedforfirmwareupgradingandconfiguration.GL300WExternalCable(Optionalaccessory)ItistheextendcablewhichincludethechargerinterfaceandexternalbatteryinterfaceonGL300W.ItalsoincludestheignitiondetectioninterfaceontheGL300W.3.2. Battery Charging  PleaseconnectAC‐DCpoweradapterwithGL300W. InserttheAC‐DCpoweradapterintothepowersocket. Duringcharging,thePWRLEDisflashingfast.Whenthebatteryisfullcharged,thePWRLEDwillbeEver‐light. YoucanalsochargethebatterybyUSBcablewhichconnectsGL300WwiththePC. Chargingtimeisabout5hours.Note:BeforethefirsttimeusingGL300W,pleasefullchargethebattery.3.3. GL300W External Cable Interface  GL300WExternalCableisacablewithaMiniUSBconnectorandsixwireswhichincludetheexternalpowerinterface,ignitiondetectandinputinterfaceforGL300W.Pleasefindthedetaildescriptioninfollowingtable.ColorNameRemarkREDExternalDCIN(5V)Pleasereferto2.4.1fordetailBlackGroundPleasereferto2.4.1fordetailBlueExternalBatteryIN(DC3.4Vto4.2V)Pleasereferto2.4.2fordetail
SuperEasyGSMModuleUserManual TRACSuperEasyUM0016WhiteIgnitionDetectPleasereferto2.5fordetailGreenNSW（negativetriggerinput）Pleasereferto2.6fordetail3.4. Turn on/Turn off  Turnon: Method1:PressthePowerkeyatleast3secondsandreleaseittoturnonGL300W.Atthesametime,PWRLEDwilllighton. Method2:Connectdevicetochargerorexternalbattery,anditwillturnonautomatically,PWRLEDwilllighton. Turnoff: Method1:Pressthepowerkeyabout2seconds;PWRLEDwillfastflashandthenturnoff,itindicatesthatGL300Wisturnedoff.Thetimeofpoweroffisdependedonthequalityofnetwork.Themaximumtimeofpoweroffis90seconds.Itisonlyvalidtoturnoffwhenusinginternalbattery.Pleasenotetheend‐usercannotpoweroffGL300Wwhenthepowerkeyisdisabledbyprotocol. Method2:Ifusingexternalbattery,devicewillpowerturn‐offwhenexternalbatterydisconnect.
SuperEasyGSMModuleUserManual TRACSuperEasyUM00174. Troubleshooting and Safety info 4.1. Troubleshooting Trouble Possible Reason Solution After GL300W is turned on, the WCDMA LED flashes quickly always. The signal is too weak; GL300W can’t register to the network. Please move GL300W into place with good WCDMA coverage. Messages can’t be reported to the backend server by GPRS. APN is wrong. Some APN cannot visit the internet directly.Ask the network operator for the right APN. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet. Unable to power off GL300W. The function of power key was disabled by AT+GTFKS. Enable the function of power key by AT+GTFKS. Unable to power off GL300W if charger connected or using external battery. Disconnect charger or external battery, and try again. No response from UART when configure GL300W through UART GL300W is in power saving mode. Remove the Data_Cable_M, and plug it in again. After this operation, GL300W will exit from power saving mode for 10 seconds. Re-try GL300W manager tool again, it will try to wake up device. GL300W can’t get successful GPS fixing. The GPS signal is weak. Please move GL300W to a place with open sky. It is better to let the top surface face to sky. (The same surface with indication LED) 4.2. Safety info  Pleasedonotdisassemblethedevicebyyourself. Pleasedonotputthedeviceontheoverheatingortoohumidplace,avoidexposuretodirectsunlight.Toohightemperaturewilldamagethedeviceorevencausethebatteryexplosion. PleasedonotuseGL300Wontheairplaneornearmedicalequipment.
SuperEasyGSMModuleUserManual TRACSuperEasyUM0018WARNING: Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1) Thisdevicemaynotcauseharmfulinterference,and(2) Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment. NOTE: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:‐Reorientorrelocatethereceivingantenna.‐Increasetheseparationbetweentheequipmentandreceiver.‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp. RF Exposure Information and Statement: TheSARlimitofUSA(FCC)is1.6W/kgaveragedoveronegramoftissue,andtheSARlimitofEu(CE)is2W/kgaveragedoveronegramoftissue.Devicetypes:GL300W(FCCID:YQD‐GL300W)hasalsobeentestedagainstthisSARlimit.ThehighestSARvaluereportedunderthisstandardduringproductcertificationforuseonthebodyis1.375W/kgfor1g(FCC)andfor10g(CE)is0.857W/kg.Thesafetydistanceis6.2cmforthisdevice.

Navigation menu