Queclink Wireless Solutions GV300C GPS Locator User Manual YQD GV300C Rev 2

Queclink Wireless Solutions Co.,Ltd GPS Locator YQD GV300C Rev 2

USERS MANUAL

GV300C User manual TRACGV3SUM001 - 1 - CDMA2000-1X/GPS Tracker GV300C User Manual Application Notes: TRACGV300CUM001 Revision: 1.01 Hhttp://www.queclink.com Hsales@queclink.com
GV300C User manual TRACGV300CUM001 - 2 - Document Title GV300C User Manual Version 1.01 Date 2013-11-14 Status Release Document Control ID TRACGV300CUM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF Exposure Statement: For the product,under normal use condition is at least 20cm away from the body of the user,the user must keeping at least 20cm distance to the product. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
GV300C User manual TRACGV300CUM001 - 3 - -Consult the dealer or an experienced radio/TV technician for help. Copyright This document contains proprietary technical information which is the property of Queclink Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright © Shanghai Queclink Wireless Solutions Co., Ltd. 2013 Contents Contents ............................................................................................................................................ 3 0. Revision History ....................................................................................................................... 6 1. Introduction ............................................................................................................................... 7 1.1 Reference .................................................................................................................. 7 1.2 Terms and Abbreviations ........................................................................................... 7 2. Product Overview ..................................................................................................................... 8 2.1. Check Part List .......................................................................................................... 8 2.2. Parts List ................................................................................................................... 9 2.3. Interface Definition ................................................................................................. 10 2.4. GV300C User Cable Colour ................................................................................... 11 3. Getting Started ........................................................................................................................ 12 3.1. Opening the Case .................................................................................................... 12 3.2. Closing the Case ...................................................................................................... 12 3.3. Installing the Internal Backup Battery..................................................................... 13 3.4. Switch ON the Backup Battery ............................................................................... 13 3.5. Installing the External GPS Antenna (Optional) ..................................................... 14 3.5.1. GPS Antenna Specification ............................................................................. 14 3.6. Power Connection ................................................................................................... 15 3.7. Ignition Detection .................................................................................................... 16 3.8. Digital Inputs ........................................................................................................... 17 3.9. Analog Inputs .......................................................................................................... 17 3.10. Digital Outputs ........................................................................................................ 1 8 3.11. Device Status LED .................................................................................................. 19 3.12. Serial Port / UART Interface ................................................................................... 21 3.12.1. Connect With Garmin GPS Set ....................................................................... 21
GV300C User manual TRACGV300CUM001 - 4 - Table Index TABLE 1. GV300C PROTOCOL REFERENCE ............................................................................. 7 TABLE 2. TERMS AND ABBREVIATIONS .................................................................................. 7 TABLE 3. PART LIST ...................................................................................................................... 9 TABLE 4. DESCRIPTION OF 16 PIN CONNECTIONS .............................................................. 10 TABLE 5. GV300C USER CABLE COLOUR DEFINITION ....................................................... 11 TABLE 6. GPS ANTENNA SPECIFICATION .............................................................................. 14 TABLE 7. ELECTRICAL CHARACTERISTICS OF IGNITION DETECTION ......................... 16 TABLE 8. ELECTRICAL CHARACTERISTICS OF THE DIGITAL INPUTS ........................... 17 TABLE 9. ELECTRICAL CHARACTERISTICS OF DIGITAL OUTPUTS ................................ 18 TABLE 10. DEFINITION OF DEVICE STATUS AND LED ......................................................... 19
GV300C User manual TRACGV300CUM001 - 5 - Figure Index FIGURE 1. APPEARANCE OF GV300C ......................................................................................... 8 FIGURE 2. THE 16 PIN CONNECTOR ON THE GV300C ........................................................... 10 FIGURE 3. OPENING THE CASE .................................................................................................. 12 FIGURE 4. CLOSING THE CASE .................................................................................................. 12 FIGURE 5. BACKUP BATTERY INSTALLATION ....................................................................... 13 FIGURE 6. SWITCH AND ON/OFF POSITION ............................................................................ 13 FIGURE 7. GPS ANTENNA OF GV300C ...................................................................................... 14 FIGURE 8. TYPICAL POWER CONNECTION ............................................................................. 15 FIGURE 9. TYPICAL IGNITION DETECTION ............................................................................ 16 FIGURE 10. TYPICAL DIGITAL INPUT CONNECTION .............................................................. 17 FIGURE 11. TYPICAL ANALOG INPUT CONNECTION ............................................................. 17 FIGURE 12. DIGITAL OUTPUT INTERNAL DRIVE CIRCUIT .................................................... 18 FIGURE 13. TYPICAL CONNECTION WITH RELAY .................................................................. 18 FIGURE 14. TYPICAL CONNECTION WITH LED ....................................................................... 19 FIGURE 15. GV300C LED ON THE CASE ..................................................................................... 19 FIGURE 16. TYPICAL CONNECTION WITH RS232 PORT ......................................................... 21 FIGURE 17. GV300C CONNECTION WITH GARMIN GPS SET ................................................. 21
GV300C User manual TRACGV300CUM001 - 6 - 0. Revision History Revision Date Author Description of change 1.00 2013-6-7 York.zhu Initial 1.01 2013-11-14 Cid.Xu Updated related images;
GV300C User manual TRACGV300CUM001 - 7 - 1. Introduction The GV300C is a compact GPS tracker designed for a wide variety of vehicle tracking applications. The GV300C has multiple input/output interfaces that can be used for monitoring or controlling external devices. Its built in GPS receiver has superior sensitivity and fast time to first fix. It’s dual band CDMA2000-1x subsystem supports 800/1900MHz allowing the GV300C's location to be monitored in real time or periodically tracked by a backend server and mobile devices. It’s built in 3-axis accelerometer allows driver behaviour, motion detection and extended battery life through sophisticated power management algorithms. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including; emergency, geo-fence boundary crossings, driver behaviour, low battery or scheduled GPS position and many other useful functions. 1.1 Reference Table 1. GV300C Protocol Reference SN Document name Remark [1] GV300C @Track Air Interface Protocol The air protocol interface between GV300C and backend server. 1.2 Terms and Abbreviations Table 2. Terms and Abbreviations Abbreviation Description AGND Analog Ground AIN Analog Input DIN Digital Input DOUT Digital Output GND Ground RXD Receive Data TXD Transmit Data NC No Connect
GV300C User manual TRACGV300CUM001 - 8 - 2. Product Overview 2.1. Check Part List Before starting, check all the following items have been included with your GV300C. If anything is missing, please contact your supplier. Figure 1. Appearance of GV300C
GV300C User manual TRACGV300CUM001 - 9 - 2.2. Parts List Table 3. Part List Name Picture GV300C Locator 80*49*26 mm User Cable Extend Cable (Optional) GPS Antenna (Optional) DATA_CABLE_M (Optional)
GV300C User manual TRACGV300CUM001 - 10 - 2.3. Interface Definition The GV300C has a 16 PIN interface connector. It contains the connections for power, I/O, RS232, etc. The sequence and definition of the 16PIN connector are shown in following figure: Figure 2. The 16 PIN connector on the GV300C Table 4. Description of 16 PIN Connections Index Description Comment 1 NC Leave it floating 2 AGND Analog Ground 3 IGN Ignition input, positive trigger 4 RXD UART RXD, RS232 5 TXD UART TXD, RS232 6 GND Power and digital ground 7 OUT3 Open drain, 150mA max 8 OUT2 Open drain, 150mA max 9 NC Leave it floating 10 NC 11 PWR External DC power input, 8-32V 12 IN2 Digital input, negative trigger 13 IN1 Digital input, negative trigger 14 OUT1 Open drain, 150mA max ,with latch circuit 15 AD1/IN3 Multifunction input, analog or digital input 0-16V 16 AD2 Analog input 0.3-16v
GV300C User manual TRACGV300CUM001 - 11 - 2.4. GV300C User Cable Colour Table 5. GV300C User Cable Colour definition Definition Color PIN No Cable PIN No Color DefinitionOUT2 Yellow 8 16 Brown/White AD2 OUT3 Brown 7 15 Green AD1/IN3GND Black 6 14 Blue OUT1 TXD White/Black 5 13 Orange IN1 RXD Green or Pink 4 12 Orange/Black IN2 IGN White 3 11 Red PWR AGND Gray/ Black 2 10 Purple/White NC NC Gray 1 9 Purple NC
GV300C User manual TRACGV300CUM001 - 12 - 3. Getting Started 3.1. Opening the Case Figure 3. Opening the Case Insert the triangular-pry-opener into the gap of the case as shown below, push the opener up until the case unsnapped. 3.2. Closing the Case Figure 4. Closing the Case Place the cover on the bottom in the position as shown in the following figure. Slide the cover against the direction of the arrow until it snapped.
GV300C User manual TRACGV300CUM001 - 13 - 3.3. Installing the Internal Backup Battery Figure 5. Backup Battery Installation There is an internal backup Li-ion battery, 3.4. Switch ON the Backup Battery To use the GV300C backup battery, the switch must be at the ON position. Switch on the case and ON/OFF position are shown below. Figure 6. Switch and ON/OFF position Note: 1. The switch must be on the “OFF” position when shipped on an aircraft. 2. When the switch is on the “OFF” position, the battery cannot be charged or discharged.
GV300C User manual TRACGV300CUM001 - 14 - 3.5. Installing the External GPS Antenna (Optional) There is a SMA GPS antenna connector on GV300C. The GV300C will automatically detect and use an external antenna when connected. Figure 7. GPS Antenna of GV300C 3.5.1. GPS Antenna Specification Table 6. GPS Antenna Specification GPS antenna: Frequency: 1575.42MHz Bandwidth: >5MHz Beam width: >120 deg Supply voltage: 2.7V-3.3V Polarization: RHCP Gain: Passive: 0dBi min Active: 15dB Impedance: 50Ω VSWR: <2 Noise figure: <3
GV300C User manual TRACGV300CUM001 - 15 - 3.6. Power Connection PWR (PIN12) / GND (PIN6) are the power input pins. The input voltage range for this device is from 8V to 32V. The device is designed to be installed in vehicles that operate on 12V or 24V systems without the need for external transformers. Figure 8. Typical Power Connection
GV300C User manual TRACGV300CUM001 - 16 - 3.7. Ignition Detection Table 7. Electrical Characteristics of Ignition Detection Logical State Electrical State Active 5.0V to 32V Inactive 0V to 3V or Open Figure 9. Typical Ignition Detection IGN (Pin3)is used for ignition detection. It is strongly recommended to connect this pin to ignition key “RUN” position as shown up. An alternative to connecting to the ignition switch is to find a non permanent power source that is only available when the vehicle is running. For example the power source for the FM radio. IGN signal can be configured to start transmitting information to backend server when ignition is on; and enter power saving mode when ignition is off. There are three general purpose digital inputs on GV300C. They are all negative trigger.
GV300C User manual TRACGV300CUM001 - 17 - 3.8. Digital Inputs Table 8. Electrical Characteristics of the digital inputs Logical State Electrical Characteristics Active 0V to 0.8V Inactive Open The following diagram shows the recommended connection of a digital input. Figure 10. Typical Digital Input Connection 3.9. Analog Inputs There are two analog inputs on GV300C, the analog input voltage range is from 0 to 16V. The following diagram shows the recommended connection. Figure 11. Typical Analog Input Connection Note: PIN 15 is a multifunction pin: it can be configured as a digital input or an analog input.
GV300C User manual TRACGV300CUM001 - 18 - 3.10. Digital Outputs There are three digital outputs on GV300C. All are of open drain type and the maximum drain current is 150 mA. Each output has the built-in over current and recovery PTC fuse Figure 12. Digital Output Internal Drive Circuit Table 9. Electrical Characteristics of Digital Outputs Logical State Electrical Characteristics Enable <1.5V @150mA Disable Open drain Figure 13. Typical Connection with Relay
GV300C User manual TRACGV300CUM001 - 19 - Figure 14. Typical Connection with LED Note: 1. OUT1 will latch the output state during reset. 2. All outputs are internally pulled up to PWR pin by a diode. So no external fly back diode is needed when the output is connected to an inductive load. 3.11. Device Status LED Figure 15. GV300C LED on the Case Table 10. Definition of Device status and LED CELL LED
GV300C User manual TRACGV300CUM001 - 20 - Note: 1. CDMA2000 LED cannot be configured. 2. GPS LED and PWR LED can be configured to turn off after a period of time using the configuration tool 3. Fast flashing is about 60ms ON/ 780ms OFF 4. Slow flashing is about 60ms ON/ 1940ms OFF LED Device status LED status CELL (note1) Device is searching CDMA2000 network Fast flashing (Note3) Device has registered to CDMA2000 network. Slow flashing (Note4) SIM card needs pin code to unlock. ON GPS (note 2) GPS chip is powered off OFF GPS sends no data or data format error. Slow flashing GPS chip is searching GPS info. Fast flashing GPS chip has gotten GPS info. ON PWR (note 2) No external power and internal battery voltage is lower than 3.35V. OFF No external power and internal battery voltage is below 3.5V. Slow flashing External power in and internal battery is charging Fast flashing External power in and internal battery is fully charged ON
GV300C User manual TRACGV300CUM001 - 21 - 3.12. Serial Port / UART Interface There are two lines dedicated to the Serial Port / UART interface (TXD and RXD).TXD / RXD are standard RS232 signal. Figure 16. Typical Connection with RS232 Port 3.12.1. Connect With Garmin GPS Set GV300C can communicate with Garmin GPS Set. The following typical connection is using Queclink AG100 cable. Figure 17. GV300C connection with Garmin GPS set Note: GV300C some version maybe connects with Garmin GPS set by Garmin FMI10/FMI15 cable, please consult with Queclink for detail information.

Navigation menu