Queclink Wireless Solutions GV300N GPA Tracker User Manual GV300N FCC

Queclink Wireless Solutions Co.,Ltd GPA Tracker GV300N FCC

Contents

Users Manual

GV300 User manual TRACGV3SUM001 - 1 - GSM/GPRS/GPS Tracker GV300N User Manual Application Notes: TRACGV300NUM001 Revision: 1.00 Hhttp://www.queclink.com Hsales@queclink.com
GV300N User manual TRACGV300NUM001 - 2 - Document Title GV300N User Manual Version 1.00 Date 2014-11-17 Status Release Document Control ID TRACGV300NUM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of Queclink. Copying of this document, and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specifications supplied herein are subject to change without notice at any time. Copyright © Queclink Wireless Solutions Co., Ltd. 2014
GV300N User manual TRACGV300NUM001 - 3 - Contents Contents ............................................................................................................................................3 0. Revision History .......................................................................................................................6 1. Introduction...............................................................................................................................7 1.1 Reference ..................................................................................................................8 1.2 Terms and Abbreviations...........................................................................................8 2. Product Overview .....................................................................................................................9 2.1. Check Parts List ........................................................................................................9 2.2. Parts List .................................................................................................................10 2.3. Interface Definition .................................................................................................11 2.4. GV300N User Cable Color .....................................................................................12 3. Get Started...............................................................................................................................13 3.1. Open the Case .........................................................................................................13 3.2. Close the Case.........................................................................................................13 3.3. Install a SIM Card ...................................................................................................14 3.4. Install the Internal Backup Battery..........................................................................14 3.5. Switch on the Backup Battery.................................................................................15 3.6. Install the External GPS Antenna (Optional) ..........................................................15 3.6.1. GPS Antenna Specification .............................................................................16 3.7. Power Connection ...................................................................................................16 3.8. Ignition Detection....................................................................................................17 3.9. Digital Inputs...........................................................................................................17 3.10. Analog Inputs..........................................................................................................18 3.11. Digital Outputs........................................................................................................19 3.12. Device Status LED..................................................................................................20 3.13. Serial Port/UART Interface.....................................................................................21 3.13.1. Connect with Garmin GPS Set........................................................................22 3.13.2. Connect with CAN100 device.........................................................................23
GV300N User manual TRACGV300NUM001 - 4 - Table Index TABLE 1. GV300N PROTOCOL REFERENCE............................................................................. 8 TABLE 2. TERMS AND ABBREVIATIONS..................................................................................8 TABLE 3. PARTS LIST..................................................................................................................10 TABLE 4. DESCRIPTION OF 16 PIN CONNECTIONS.............................................................. 11 TABLE 5. GV300N USER CABLE COLOR DEFINITION .........................................................12 TABLE 6. GPS ANTENNA SPECIFICATION..............................................................................16 TABLE 7. ELECTRICAL CHARACTERISTICS OF IGNITION DETECTION .........................17 TABLE 8. ELECTRICAL CHARACTERISTICS OF THE DIGITAL INPUTS ...........................17 TABLE 9. ELECTRICAL CHARACTERISTICS OF DIGITAL OUTPUTS ................................19 TABLE 10. DEFINITION OF DEVICE STATUS AND LED .........................................................21 TABLE 11. EXTERNAL INTERFACE OF CAN100 DEVICE....................................................... 23 TABLE 12. CAN100 DEVICE CONNECTS WITH GV300N ........................................................23
GV300N User manual TRACGV300NUM001 - 5 - Figure Index FIGURE 1. APPEARANCE OF GV300N .........................................................................................9 FIGURE 2. THE 16 PIN CONNECTOR ON THE GV300N........................................................... 11 FIGURE 3. OPEN THE CASE......................................................................................................... 13 FIGURE 4. CLOSE THE CASE.......................................................................................................13 FIGURE 5. SIM CARD INSTALLATION.......................................................................................14 FIGURE 6. BACKUP BATTERY INSTALLATION .......................................................................14 FIGURE 7. SWITCH AND ON/OFF POSITION ............................................................................15 FIGURE 8. GPS ANTENNA OF GV300N ...................................................................................... 15 FIGURE 9. TYPICAL POWER CONNECTION.............................................................................16 FIGURE 10. TYPICAL IGNITION DETECTION ............................................................................ 17 FIGURE 11. TYPICAL DIGITAL INPUT CONNECTION .............................................................. 18 FIGURE 12. TYPICAL ANALOG INPUT CONNECTION .............................................................18 FIGURE 13. DIGITAL OUTPUT INTERNAL DRIVE CIRCUIT .................................................... 19 FIGURE 14. TYPICAL CONNECTION WITH RELAY ..................................................................19 FIGURE 15. TYPICAL CONNECTION WITH LED .......................................................................20 FIGURE 16. GV300N LED ON THE CASE .....................................................................................20 FIGURE 17. TYPICAL CONNECTION WITH RS232 PORT .........................................................22 FIGURE 18. GV300 CONNECTION WITH GARMIN GPS SET....................................................22 FIGURE 19. THE EXTERNAL INTERFACE OF CAN100 DEVICE.............................................. 23
GV300N User manual TRACGV300NUM001 - 6 - 0. Revision History Revision Date Author Description of change 1.00 2014-11-17 Super Zhao Initial
GV300N User manual TRACGV300NUM001 - 7 - 1. Introduction The GV300N is a powerful GPS locator designed for vehicle or asset tracking. It has superior receiver sensitivity, fast TTFF (Time to First Fix) and supports quad band GSM frequencies GSM850/GSM900/DCS/PCS. Its location can be monitored in real time or periodically tracked by a backend server or other specified terminals. The GV300N has multiple input/output interfaces that can be used for monitoring or controlling external devices. Based on the integrated @Track protocol, the GV300N can communicate with a backend server through the GPRS/GSM network to transfer reports of emergency, geo-fence boundary crossings, low backup battery and scheduled GPS position as well as many other useful functions. Users can also use GV300N to monitor the status of a vehicle and control the vehicle by its external relay output. System integrators can easily set up their tracking systems based on the full-featured @Track protocol. WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement: For the product, under normal use condition is at least 20cm away from the body of the user, the user must keeping at least 20cm distance to the product.
GV300N User manual TRACGV300NUM001 - 8 - 1.1 Reference Table 1. GV300N Protocol Reference SN Document name Remark [1] GV300N @Track Air Interface Protocol The air protocol interface between GV300N and backend server. 1.2 Terms and Abbreviations Table 2. Terms and Abbreviations Abbreviation Description AGND Analog Ground AIN Analog Input DIN Digital Input DOUT Digital Output GND Ground MIC Microphone RXD Receive Data TXD Transmit Data SPKN Speaker Negative SPKP Speaker Positive
GV300N User manual TRACGV300NUM001 - 9 - 2. Product Overview 2.1. Check Parts List Before starting, check whether all the following items have been included with your GV300N. If anything is missing, please contact your supplier. Figure 1. Appearance of GV300N
GV300N User manual TRACGV300NUM001 - 10 - 2.2. Parts List Table 3. Parts List Name Picture GV300N Locator 80*49*26 mm User Cable GPS Antenna (Optional) DATA_CABLE_M (Optional)
GV300N User manual TRACGV300NUM001 - 11 - 2.3. Interface Definition The GV300N has a 16 PIN interface connector which contains the connections for power, I/O, RS232, microphone, speaker, etc. The sequence and definition of the 16PIN connector are shown in the following figure: Figure 2. The 16 PIN Connector on the GV300N Table 4. Description of 16 PIN Connections Index Description Comment 1 MICP Single end, 2-2.2k microphone, internal bias 2 AGND Analog ground 3 IGN Ignition input, positive trigger 4 RXD UART RXD, RS232 5 TXD UART TXD, RS232 6 GND Power and digital ground 7 OUT3 Open drain, 150 mA max 8 OUT2 Open drain, 150 mA max 9 EARP 10 EARN Differential output, 32 ohm 1/4w speaker 11 PWR External DC power input, 8-32V 12 IN2 Digital input, negative trigger 13 IN1 Digital input, negative trigger 14 OUT1 Open drain, 150 mA max ,with latch circuit 15 AD1/IN3 Multifunction input, analog or digital input 0-16V 16 AD2 Analog input 0.3-16V
GV300N User manual TRACGV300NUM001 - 12 - 2.4. GV300N User Cable Color Table 5. GV300N User Cable Color Definition Definition Color PIN No Cable PIN No Color DefinitionOUT2 Yellow 8 16 Brown/White AD2 OUT3 Brown 7 15 Green AD1/IN3GND Black 6 14 Blue OUT1 TXD White/Black 5 13 Orange IN1 RXD Pink 4 12 Orange/Black IN2 IGN White 3 11 Red PWR AGND Gray/Black 2 10 Purple/White EARN MICP Gray 1 9 Purple EARP
GV300N User manual TRACGV300NUM001 - 13 - 3. Get Started 3.1. Open the Case Figure 3. Open the Case Insert the triangular-pry-opener into the gap of the case as shown above, and push the opener up until the case is unsnapped. 3.2. Close the Case Figure 4. Close the Case Place the cover on the bottom in the position as shown in the figure above. Slide the cover against the direction of the arrow until it snaps.
GV300N User manual TRACGV300NUM001 - 14 - 3.3. Install a SIM Card Open the case and ensure the unit is not powered (unplug the 16Pin cable and switch the internal battery to the OFF position). Slide the holder right to open the SIM card holder. Insert the SIM card into the holder as shown below with the gold-colored contact area facing down. Take care to align the cut mark. Close the SIM card holder. Close the case. Figure 5. SIM Card Installation 3.4. Install the Internal Backup Battery Figure 6. Backup Battery Installation GV300N has an internal backup Li-ion battery.
GV300N User manual TRACGV300NUM001 - 15 - 3.5. Switch on the Backup Battery To use the GV300N backup battery, the switch must be in the ON position. The switch on the case and the ON/OFF position are shown below. Figure 7. Switch and ON/OFF Position Note: 1. The switch must be in the “OFF” position when the GV300N is shipped on an aircraft. 2. When the switch is in the “OFF” position, the battery cannot be charged or discharged. 3.6. Install the External GPS Antenna (Optional) There is a SMA GPS antenna connector on GV300N. The GV300N will automatically detect and use an external antenna when connected. Figure 8. GPS Antenna of GV300N
GV300N User manual TRACGV300NUM001 - 16 - 3.6.1. GPS Antenna Specification Table 6. GPS Antenna Specification GPS antenna Frequency: 1575.42 MHz Bandwidth >5 MHz Beam width >120 deg Supply voltage 2.7V-3.3V Polarization RHCP Gain Passive: 0 dBi min Active: 15 dB Impedance 50Ω VSWR <2 Noise figure <3 3.7. Power Connection PWR (PIN12)/GND (PIN6) is the power input pin. The input voltage range for this device is from 8V to 32V. The device is designed to be installed in vehicles that operate on 12V or 24V systems without the need for external transformers. Figure 9. Typical Power Connection
GV300N User manual TRACGV300NUM001 - 17 - 3.8. Ignition Detection Table 7. Electrical Characteristics of Ignition Detection Logical status Electrical characteristics Active 5.0V to 32V Inactive 0V to 3V or open Figure 10. Typical Ignition Detection IGN (Pin3) is used for ignition detection. It is strongly recommended to connect this pin to ignition key “RUN” position as shown above. An alternative to connecting to the ignition switch is to find a non-permanent power source that is only available when the vehicle is running, for example, the power source for the FM radio. IGN signal can be configured to start transmitting information to the backend server when ignition is on, and enter the power saving mode when ignition is off. 3.9. Digital Inputs There are three general purpose digital inputs on GV300N. They are all negative triggers. Table 8. Electrical Characteristics of the Digital Inputs Logical status Electrical characteristics Active 0V to 0.8V Inactive Open The following diagram shows the recommended connection of a digital input.
GV300N User manual TRACGV300NUM001 - 18 - Figure 11. Typical Digital Input Connection 3.10. Analog Inputs There are two analog inputs on GV300, and the analog input voltage range is from 0 to 16V. The following diagram shows the recommended connection. Figure 12. Typical Analog Input Connection Note: PIN 15 is a multifunction pin: it can be configured as a digital input or an analog input.
GV300N User manual TRACGV300NUM001 - 19 - 3.11. Digital Outputs There are three digital outputs on GV300N. All are of open drain type and the maximum drain current is 150 mA. Each output has the built-in over current PTC resettable fuse. Figure 13. Digital Output Internal Drive Circuit Table 9. Electrical Characteristics of Digital Outputs Logical status Electrical characteristics Enable <1.5V @150 mA Disable Open drain Figure 14. Typical Connection with Relay
GV300N User manual TRACGV300NUM001 - 20 - Figure 15. Typical Connection with LED Note: 1. OUT1 will latch the output state during reset. 2. Many modern relays come with a flyback diode pre-installed internal to the relay itself. If the relay has this diode, ensure the relay polarity is properly connected. If this diode is not internal, it should be added externally. A common diode such as a 1N4004 will work in most circumstances. 3.12. Device Status LED Figure 16. GV300N LED on the Case
GV300N User manual TRACGV300NUM001 - 21 - Table 10. Definition of Device Status and LED Note: 1. GSM LED cannot be configured. 2. GPS LED and PWR LED can be configured to turn off after a period of time by using the configuration tool. 3. Fast flashing is about 60 ms ON/780 ms OFF. 4. Slow flashing is about 60 ms ON/1940 ms OFF. 3.13. Serial Port/UART Interface There are two lines dedicated to the Serial Port/UART interface (TXD and RXD). TXD/RXD are standard RS232 signal. LED Device status LED status Device is searching GSM network. Fast flashing (Note 3) Device has registered to GSM network. Slow flashing (Note 4) GSM (Note 1) SIM card needs pin code to unlock. ON GPS chip is powered off. OFF GPS sends no data or data format error occurs. Slow flashing GPS chip is searching GPS info. Fast flashing GPS (Note 2) GPS chip has gotten GPS info. ON No external power and internal battery voltage is lower than 3.35V. OFF No external power and internal battery voltage is below 3.5V. Slow flashing External power in and internal battery is charging. Fast flashing PWR (Note 2) External power in and internal battery is fully charged. ON
GV300N User manual TRACGV300NUM001 - 22 - Figure 17. Typical Connection with RS232 Port 3.13.1. Connect with Garmin GPS Set GV300N can communicate with Garmin GPS set. The following typical connection is using Queclink AG100 cable. Figure 18. GV300 Connection with Garmin GPS Set Note: Some versions of GV300N can connect with Garmin GPS set by Garmin FMI10/FMI15 cable. Please consult Queclink for detail information.
GV300N User manual TRACGV300NUM001 - 23 - 3.13.2. Connect with CAN100 device GV300N can communicate with CAN100 device only by RS232 port. The following picture shows the external interface of CAN100 device. Refer to Figure 19. Figure 19. The External Interface of CAN100 Device The following table 11 shows the definition of CAN100 device’s external interface . Pin No. Pin Name Cable Color S1-1 TX Blue/Yellow S1-2 RX Blue/Red S1-3 Power Supply Red S1-4 Ground Black Table 11. External Interface of CAN100 Device The following Table 12 shows how to connect with the GV300N. GV300N CAN100 Pin No. Pin Name Color Connection Pin No. Pin Name Color 4 RXD Green or Pink ←----→ S1-1 TX Blue/Yellow5 TXD White/Black ←----→ S1-2 RX Blue/Red 11 Power Red ←----→ S1-3 Power Supply Red 6 Ground Black ←----→ S1-4 Ground Black Table 12. CAN100 Device Connects with GV300N Note: 1. As to how to distinguish the CAN100 device’s serial port is RS232 or TTL, please refer to CAN100 specification.

Navigation menu