Queclink Wireless Solutions GV35 GPS Locator User Manual GV35 for FCC
Queclink Wireless Solutions Co.,Ltd GPS Locator GV35 for FCC
Users Manual
GV35 User manual GPS Locator GV35 User Manual TRACGV35UM001 Revision: 1.00 http://www.queclink.com sales@queclink.com TRACGV35UM001 GV35 User manual Document Title GV35 User Manual Version 1.00 Date 2012-05-17 Status Release Document Control ID TRACGV35UM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. This device complies with part 15B, part 22 and part 24 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Users must maintain a separation distance of at least 20cm from the EUT to satisfy RF exposure compliance. Copyright This document contains proprietary technical information which is the property of Queclink Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright © Shanghai Queclink Wireless Solutions Co., Ltd. 2012 TRACGV35UM001 -2- GV35 User manual Contents 1. Introduction...................................................................................................................................7 1.1. Reference.............................................................................................................................7 1.2. Terms and Abbreviations.....................................................................................................7 2. Product Overview .........................................................................................................................8 2.1. Check Part List ....................................................................................................................8 2.2. Parts List..............................................................................................................................9 2.3. Interface Definition .............................................................................................................9 3. Getting Started ............................................................................................................................ 11 3.1. Opening the Case .............................................................................................................. 11 3.2. Closing the Case................................................................................................................ 11 3.3. Installing a SIM Card ........................................................................................................12 3.4. Power Connection .............................................................................................................12 3.5. Ignition Detection..............................................................................................................13 3.6. Digital Input ......................................................................................................................13 3.7. Digital Output....................................................................................................................14 3.8. Relay .................................................................................................................................15 3.9. Device Status LED ............................................................................................................16 TRACGV35UM001 -3- GV35 User manual Table Index TABLE 1: GV35 PROTOCOL REFERENCE .........................................................................................7 TABLE 2: TERMS AND ABBREVIATIONS .........................................................................................7 TABLE 3: PART LIST .............................................................................................................................9 TABLE 4: DESCRIPTION OF 6 PIN CONNECTIONS .......................................................................10 TABLE 5: ELECTRICAL CHARACTERISTICS OF IGNITION DETECTION.................................13 TABLE 6: ELECTRICAL CHARACTERISTICS OF THE DIGITAL INPUT .....................................13 TABLE 7: ELECTRICAL CHARACTERISTICS OF DDIGITAL OUTPUT.......................................15 TABLE 8: ELECTRICAL CHARACTERISTICS OF RELAY .............................................................15 TABLE 9: DEFINITION OF DEVICE STATUS AND LED.................................................................17 TRACGV35UM001 -4- GV35 User manual Figure Index FIGURE 1. APPEARANCE OF GV35 ..............................................................................................8 FIGURE 2. THE 6 PIN CONNECTOR ON THE GV35..................................................................10 FIGURE 3. OPENING THE CASE.................................................................................................. 11 FIGURE 4. CLOSING THE CASE.................................................................................................. 11 FIGURE 5. SIM CARD INSTALLATION.......................................................................................12 FIGURE 6. TYPICAL POWER CONNECTION.............................................................................12 FIGURE 7. TYPICAL IGNITION DETECTION ............................................................................13 FIGURE 8. TYPICAL DIGITAL INPUT CONNECTION ..............................................................14 FIGURE 9. DIGITAL OUTPUT INTERNAL DRIVE CIRCUIT ....................................................14 FIGURE 10. TYPICAL CONNECTION WITH LED .......................................................................15 FIGURE 11. TYPICAL CONNECTION WITH RELAY ..................................................................16 FIGURE 12. GV35 LED ON THE CASE ..........................................................................................16 TRACGV35UM001 -5- GV35 User manual Revision History Revision Date Author Description of change 1.00 2012-5-17 Cid Xu Initial TRACGV35UM001 -6- GV35 User manual 1. Introduction The GV35 is a powerful GPS locator designed for vehicle or asset tracking. It has superior receiver sensitivity, fast TTFF (Time to First Fix) and supports Quad-Band GSM frequencies 850/900/1800/1900, its location can be monitored in real time or be periodically tracked by a backend server or other specified terminals. The GV35 has multiple input/output interfaces that can be used for monitoring or controlling external devices. Based on the integrated @Track protocol, the GV35 can communicate with a backend server through the GPRS/GSM network to transfer reports of Emergency, geo-fence boundary crossings, low backup battery or scheduled GPS position as well as many other useful functions. Users can also use GV35 to monitor the status of a vehicle and control the vehicle by its internal relay output. System Integrators can easily setup their tracking systems based on the full-featured @Track protocol. 1.1. Reference Table 1: GV35 Protocol Reference SN Document name Remark [1] GV35 @Track Air Interface Protocol The air protocol interface between GV35 and backend server. 1.2. Terms and Abbreviations Table 2: Terms and Abbreviations Abbreviation Description GND Ground NC Not Connected IN1 Input Port PWR External DC power input OUT1 Output Port IGN Ignition input TRACGV35UM001 GV35 User manual 2. Product Overview 2.1. Check Part List Before starting, check all the following items have been included with your GV35. If anything is missing, please contact your supplier. Figure 1. TRACGV35UM001 Appearance of GV35 GV35 User manual 2.2. Parts List Table 3: Part List Name GV35 Locator Picture 74*49.5*24 mm User Cable Relay Inserted spring Relay Inserted spring Protective sleeve 2.3. Interface Definition The GV35 has a 6 PIN interface connector. It contains the connections for power and I/O. The sequence and definition of the 6PIN connector are shown in following figure: TRACGV35UM001 -9- GV35 User manual Figure 2. The 6 PIN connector on the GV35 Table 4: Description of 6 PIN Connections Index Description Comment GND Ground NC IN1 Digital input, negative trigger PWR External DC power input, 9-16V OUT1 Open drain output signal(max drive current is 150mA) IGN Ignition input, positive trigger TRACGV35UM001 - 10 - GV35 User manual 3. Getting Started 3.1. Opening the Case Figure 3. Opening the Case Insert the triangular-pry-opener into the gap of the case as shown below, push the opener up until the case unsnapped. 3.2. Closing the Case Figure 4. TRACGV35UM001 Closing the Case GV35 User manual Place the cover on the bottom in the position as shown in the following figure. Slide the cover follow the direction of the arrow until it snapped. 3.3. Installing a SIM Card Open the case and ensure the unit is not powered (unplug the 6Pin cable and switch the internal battery to off position). Slide the holder right to open the SIM card. Insert the SIM card into the holder as shown below with the gold-colored contact area facing down taking care to align the cut mark. Close the SIM card holder. Close the case. Figure 5. SIM Card Installation 3.4. Power Connection PWR (PIN4) / GND (PIN1) are the power input pins. The input voltage range for this device is from 9V to 16V. The device is designed to be installed in vehicles that operate on 12V systems without the need for external transformers. Figure 6. TRACGV35UM001 Typical Power Connection - 12 - GV35 User manual 3.5. Ignition Detection Table 5: Electrical Characteristics of Ignition Detection Logical State Electrical State Active 5.0V to 16V Inactive 0V to 3V or Open Figure 7. Typical Ignition Detection IGN (Pin6) is used for ignition detection. It is strongly recommended to connect this pin to ignition key “RUN” position as shown up. An alternative to connecting to the ignition switch is to find a non permanent power source that is only available when the vehicle is running. For example the power source for the FM radio. IGN signal can be configured to start transmitting information to backend server when ignition is on; and enter power saving mode when ignition is off. 3.6. Digital Input There is a general purpose digital input on GV35. It is negative trigger. Table 6: Electrical Characteristics of the digital input TRACGV35UM001 - 13 - GV35 User manual Logical State Electrical Characteristics Active 0V to 0.8V Inactive Open The following diagram shows the recommended connection of a digital input. Figure 8. Typical Digital Input Connection 3.7. Digital Output There is a digital output on GV35 which is open drain type and can latch the output statue when there is no control. The output has a built-in over current and recovery PTC fuse and the maximum drain current is 150 mA. Figure 9. TRACGV35UM001 Digital Output Internal Drive Circuit - 14 - GV35 User manual Table 7: Electrical Characteristics of Ddigital Output Logical State Electrical Characteristics Enable <1.5V @150mA Disable Open drain Figure 10. Typical Connection with LED Note: 1 - OUT1 will latch the output state during reset. 3.8. Relay There is a built-in relay on GV35. The relay can latch the output statue when there is no control to relay. The rating load of the relay is 20A/14V.. Table 8: Electrical Characteristics of relay Electrical Characteristics Max. Switching Power 280W Max. Switching Voltage 18VDC Max. Switching Current 25A Contact Resistance ≤100mΩ Rating Load 20A/14VDC Initial Insulation Resistance Min. 100MΩ 500VDC TRACGV35UM001 - 15 - GV35 User manual Figure 11. Typical Connection with relay Note: 1 - Relay will latch the output state during reset. 3.9. Device Status LED Figure 12. TRACGV35UM001 GV35 LED on the Case - 16 - GV35 User manual Table 9: Definition of Device status and LED LED Device status LED status GSM (note1) Device is searching GSM network Fast flashing (Note3) Device has registered to GSM network. Slow flashing (Note4) GPS chip is powered off OFF GPS chip is searching GPS info. OFF GPS chip has gotten GPS info. ON No power OFF power in ON GPS (note 2) PWR (note 2) Note: 1 - GSM LED cannot be configured. 2 - GPS LED and PWR LED can be configured to turn off after a period of time using the configuration tool 3 - Fast flashing is about 60ms ON/ 780ms OFF 4 - Slow flashing is about 60ms ON/ 1940ms OFF TRACGV35UM001 - 17 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:06:01 21:25:25+08:00 Create Date : 2012:05:25 15:13:23+08:00 Metadata Date : 2012:06:01 21:25:25+08:00 Format : application/pdf Title : Microsoft Word - GV35 User manual for FCC.doc Creator : spring Document ID : uuid:707086b0-218a-4c9d-bc93-d6e30aa627e5 Instance ID : uuid:a13211ce-1b69-4894-b9ab-018ba405815e Page Count : 17 Author : springEXIF Metadata provided by EXIF.tools