Quuppa QT1 Tag Module User Manual

Quuppa Oy Tag Module

User Manual

Download: Quuppa QT1 Tag Module User Manual
Mirror Download [FCC.gov]Quuppa QT1 Tag Module User Manual
Document ID3705638
Application ID2KJWFHq3IQzHUKW79z4VuA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize54.04kB (675493 bits)
Date Submitted2018-01-09 00:00:00
Date Available2018-07-09 00:00:00
Creation Date2017-12-19 08:51:03
Producing SoftwareSkia/PDF m64
Document Lastmod2017-12-28 17:33:40
Document TitleUser Manual

Quuppa​ ​QT1
Quuppa​ ​Tag​ ​Module
User​ ​Guide​ ​v.​ ​DRAFT
7.12.2017
FCC ID: QE9QT1
IC: 10657A-QT1
Revision​ ​History
Version
number
2/10
Changes
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
Date
Person
©​ ​2017​ ​Quuppa​ ​Oy
Contents
Introduction
​4
Features
​4
Using​ ​the​ ​Quuppa​ ​QT1
​4
General​ ​Instructions
​4
Integrating​ ​QT1​ ​into​ ​a​ ​host​ ​device
​5
QT1​ ​Pinout
​5
OEM​ ​Instructions
​5
Product​ ​Information
​5
Battery​ ​/​ ​power​ ​source
​5
Technical​ ​Specifications
​5
Care​ ​and​ ​Maintenance
​6
Recycling​ ​and​ ​disposal
​6
FCC​ ​and​ ​IC​ ​Regulatory​ ​Statements
​7
Industry​ ​Canada​ ​Statement
​7
FCC​ ​Statement
​8
OEM​ ​Responsibilities
​9
Japan​ ​(MIC)​ ​Regulatory
​9
CE​ ​Regulatory
​10
EU​ ​Declaration​ ​of​ ​Conformity
​10
Bluetooth​ ​SIG​ ​Qualification
​10
Copyright​ ​and​ ​other​ ​notice
​10
3/10
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
©​ ​2017​ ​Quuppa​ ​Oy
1. Introduction
Quuppa QT1 is a Tag Module designed to be integrated into your Tag mechanics and to be fully
compatible with the Quuppa Intelligent Locating System. Other parts of the Quuppa Intelligent Locating
System are Quuppa Locators and Quuppa Positioning Engine software. The Quuppa Intelligent Locating
System allows you to locate and track any objects equipped with Quuppa Tags in an environment
equipped​ ​with​ ​Quuppa​ ​Locators.
Read this guide carefully and watch the Quuppa Tutorial and Quuppa Academy videos before starting to
use the system. For the latest guides, additional information, and downloads related to your Quuppa
product,​ ​go​ ​to​ ​Quuppa​ ​Customer​ ​Portal​ ​at​ ​https://secure.quuppa.com/​.
2. Features
3. Using​ ​the​ ​Quuppa​ ​QT1
3.1.
General​ ​Instructions
Activate​ ​Quuppa​ ​QT1
Before using Quuppa QT1, you must activate it and configure it for your Quuppa Intelligent Locating
System.
1. Press​ ​the​ ​reset​ ​button​ ​for​ ​one​ ​second​ ​to​ ​activate​ ​Quuppa​ ​QT1
2. Within 30 seconds, send a configuration command to the Quuppa QT1. For details, see Quuppa
Tag​ ​configuration​ ​tutorial​ ​in​ ​the​ ​Quuppa​ ​Customer​ ​Portal.
Attaching​ ​QT1
Quuppa QT1 is not meant to be directly attached to a locatable object. It is meant to be installed into a
host​ ​product.​ ​Please​ ​follow​ ​the​ ​host​ ​product’s​ ​instruction​ ​regarding​ ​its​ ​installation​ ​to​ ​a​ ​locatable​ ​object.
IMPORTANT For optimal operation do not attach a product containing Quuppa QT1 onto a large metal
surface.
Reset​ ​to​ ​factory​ ​settings
To​ ​reset​ ​to​ ​factory​ ​settings,​ ​press​ ​and​ ​hold​ ​the​ ​reset​ ​button​ ​for​ ​10​ ​seconds.
4/10
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
©​ ​2017​ ​Quuppa​ ​Oy
3.2.
Integrating​ ​QT1​ ​into​ ​a​ ​host​ ​device
3.3.
QT1​ ​Pinout
3.4.
OEM​ ​Instructions
In order to have the same RF properties in the final product as in the QT1, a battery must not be placed
directly​ ​below​ ​the​ ​antenna.
4. Product​ ​Information
4.1.
Battery​ ​/​ ​power​ ​source
Quuppa​ ​QT1​ ​does​ ​not​ ​include​ ​a​ ​battery.​ ​[here​ ​instructions​ ​on​ ​what​ ​kind​ ​of​ ​power​ ​source​ ​to​ ​use]
WARNING
4.2.
RISK OF EXPLOSION IF INCORRECT POWER SOURCE IS USED. DISPOSE USED
BATTERIES​ ​ACCORDING​ ​TO​ ​LOCAL​ ​REGULATION.
Technical​ ​Specifications
Item
Description
Dimensions
26.5​ ​mm​ ​×​ ​24.5​ ​mm​ ​×​ ​1.6​ ​mm
Weight
1.5g
Operating​ ​temp.​ ​range
−30°C​ ​...​ ​+85°C
Storage​ ​temp.​ ​range
−30°C​ ​...​ ​+85°C
Carrier​ ​frequencies
2401​ ​2402​ ​…​ ​2408​ ​2481​ ​MHz
Power​ ​supply
External​ ​3.0​ ​V​ ​power​ ​supply​ ​(not​ ​included)
Certifications
Pending​ ​CE,​ ​FCC,​ ​IC,​ ​Japan​ ​and​ ​Korea
Functionality
Button,​ ​LED,​ ​Accelerometer,​ ​I/O​ ​pins​ ​for​ ​connecting​ ​simple
peripherals,​ ​compatible​ ​with​ ​Quuppa​ ​firmware​ ​library
5/10
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
©​ ​2017​ ​Quuppa​ ​Oy
5. Care​ ​and​ ​Maintenance
6. Recycling​ ​and​ ​disposal
Always return your used electronic products, batteries, and packaging materials to dedicated collection
points.​ ​This​ ​way​ ​you​ ​help​ ​prevent​ ​uncontrolled​ ​waste​ ​disposal​ ​and​ ​promote​ ​the​ ​recycling​ ​of​ ​materials.
Disposal of Electrical and Electronic Equipment. This crossed-out wheeled-bin symbol
indicates that this product should not be treated as household waste. Instead hand it over
to the appropriate collection point for the recycling of electrical and electronic equipment in
accordance​ ​with​ ​local​ ​environmental​ ​regulations​ ​for​ ​waste​ ​disposal.
Ensuring proper product and battery disposal prevents potential negative consequences
for the environment and human health. For more information, contact your city, the place
of​ ​purchase,​ ​or​ ​support@quuppa.com.
6/10
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
©​ ​2017​ ​Quuppa​ ​Oy
7. FCC​ ​and​ ​IC​ ​Regulatory​ ​Statements
Model
FCC​ ​ID
IC​ ​ID
QT1
QE9QT1
10657A-QT1
Item
Description
Radio
nRF52832​ ​Bluetooth​ ​SoC​ ​by​ ​Nordic​ ​Semiconductor
Radio​ ​transmission
Bi-directional
Number​ ​of​ ​channels
81​ ​channels​ ​(1​ ​MHz)​ ​but​ ​only​ ​one​ ​at​ ​a​ ​time
Carrier​ ​frequencies
2401​ ​2402​ ​…​ ​2408​ ​2481​ ​MHz
Modulation
GFSK
Max​ ​Output​ ​Power
2.5​ ​mW
Antenna
Integrated​ ​printed​ ​IFA​ ​antenna​ ​with​ ​0dBi​ ​gain
7.1.
Industry​ ​Canada​ ​Statement
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two
conditions:
1. This​ ​device​ ​may​ ​not​ ​cause​ ​harmful​ ​interference,​ ​and
2. this device must accept any interference received, including interference that may cause
undesired​ ​operation.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be chosen so that the equivalent
isotropically​ ​radiated​ ​power​ ​(e.i.r.p.)​ ​is​ ​not​ ​more​ ​than​ ​that​ ​necessary​ ​for​ ​successful​ ​communication.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
L’exploitation​ ​est​ ​autorisée​ ​aux​ ​deux​ ​conditions​ ​suivantes​ ​:
1. le​ ​dispositif​ ​ne​ ​doit​ ​pas​ ​produire​ ​de​ ​brouillage​ ​préjudiciable,​ ​et
2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer
un​ ​fonctionnement​ ​indésirable.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec
une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radio électrique à l'intention des autres utilisateurs, il faut
choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
dépasse​ ​pas​ ​l'intensité​ ​nécessaire​ ​à​ ​l'établissement​ ​d'une​ ​communication​ ​satisfaisante.
7/10
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
©​ ​2017​ ​Quuppa​ ​Oy
7.2.
FCC​ ​Statement
This​ ​device​ ​complies​ ​with​ ​Part​ ​15​ ​of​ ​the​ ​FCC​ ​Rules.​ ​Operation​ ​is​ ​subject​ ​to​ ​the​ ​following​ ​two​ ​conditions:
1. This​ ​device​ ​may​ ​not​ ​cause​ ​harmful​ ​interference;​ ​and
2. This device must accept any interference received, including interference that may cause
undesired​ ​operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference​ ​by​ ​one​ ​or​ ​more​ ​of​ ​the​ ​following​ ​measures:
● Reorient​ ​or​ ​relocate​ ​the​ ​receiving​ ​antenna.
● Increase​ ​the​ ​separation​ ​between​ ​the​ ​equipment​ ​and​ ​receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult​ ​the​ ​dealer​ ​or​ ​an​ ​experienced​ ​radio/TV​ ​technician​ ​for​ ​help.
WARNING
Changes or modifications not expressly approved by Quuppa could void the user's
authority​ ​to​ ​operate​ ​the​ ​equipment.
This portable transmitter with its antenna complies with FCC/IC RF exposure limits for general population
/​ ​uncontrolled​ ​exposure.
8/10
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
©​ ​2017​ ​Quuppa​ ​Oy
7.3.
WARNING
OEM​ ​Responsibilities
The OEM must ensure that FCC and IC labelling requirements are met. This includes a
clearly visible label on the outside of the OEM enclosure specifying the appropriate
Quuppa​ ​Oy​ ​FCC​ ​and​ ​IC​ ​identifiers​ ​for​ ​this​ ​product.
Contains​ ​FCC​ ​ID:​ ​QE9QT1
Contains​ ​IC:​ ​10657A-QT1
or
​Contains​ ​Transmitter​ ​Module​ ​FCC​ ​ID:​ ​QE9QT1
​Contains​ ​Transmitter​ ​Module​ ​IC:​ ​10657A-QT1
If the size of the end product is larger than 8x10cm, then the following FCC part 15.19
statement​ ​has​ ​to​ ​also​ ​be​ ​available​ ​visibly​ ​on​ ​outside​ ​of​ ​device:
​The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may cause
undesired​ ​operation.
The Quuppa Tag Module (QT1) has been certified for integration into products only by OEM integrators
under​ ​the​ ​following​ ​conditions:
1. The antenna(s) must be installed such that a minimum separation distance of 5mm is maintained
between​ ​the​ ​radiator​ ​(antenna)​ ​and​ ​all​ ​persons​ ​at​ ​all​ ​times.
2. The transmitter module must not be co-located or operating in conjunction with any other antenna
or​ ​transmitter.
As long as the two conditions above are met, further transmitter testing will not be required. However, the
OEM integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT In the event that these conditions cannot be met (for certain configurations or co-location
with another transmitter), then the FCC and Industry Canada authorizations are no longer
considered valid and the FCC ID and IC Certification Number cannot be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate FCC and Industry
Canada​ ​authorization.
8. Japan​ ​(MIC)​ ​Regulatory
9/10
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
©​ ​2017​ ​Quuppa​ ​Oy
9. CE​ ​Regulatory
10. EU​ ​Declaration​ ​of​ ​Conformity
A​ ​copy​ ​of​ ​the​ ​Declaration​ ​of​ ​Conformity​ ​can​ ​be​ ​found​ ​at:​ ​www.quuppa.com/support​.
11. Bluetooth​ ​SIG​ ​Qualification
12. Copyright​ ​and​ ​other​ ​notice
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form
without the prior written permission of Quuppa is prohibited. Quuppa operates a policy of continuous
development. Quuppa reserves the right to make changes and improvements to any of the products
described​ ​in​ ​this​ ​document​ ​without​ ​prior​ ​notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES
SHALL QUUPPA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER​ ​CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. QUUPPA RESERVES THE RIGHT TO REVISE THIS DOCUMENT
OR​ ​WITHDRAW​ ​IT​ ​AT​ ​ANY​ ​TIME​ ​WITHOUT​ ​PRIOR​ ​NOTICE.
The availability of particular products may vary by region. Please check with your Quuppa dealer for
details. This device may contain commodities, technology or software subject to export laws and
regulations​ ​from​ ​the​ ​US​ ​and​ ​other​ ​countries.​ ​Diversion​ ​contrary​ ​to​ ​law​ ​is​ ​prohibited.
10/
10
Quuppa​ ​QT1​ ​User​ ​Guide
Quuppa​ ​Oy,​ ​Keilaranta​ ​1,​ ​02150​ ​Espoo,​ ​Finland
©​ ​2017​ ​Quuppa​ ​Oy
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Skia/PDF m64
Modify Date                     : 2017:12:28 17:33:40+08:00
Create Date                     : 2017:12:19 08:51:03+08:00
Metadata Date                   : 2017:12:28 17:33:40+08:00
Format                          : application/pdf
Document ID                     : uuid:acb17a98-0d38-4f9a-95b2-37fb89e72fa7
Instance ID                     : uuid:e5970d1d-a5c9-41d4-88a5-13ee61b30e09
Has XFA                         : No
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QE9QT1

Navigation menu