Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 575122 |
| Application ID | dQvZIhWiyQ26GLbsAKNNKw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 57.44kB (717953 bits) |
| Date Submitted | 2005-08-25 00:00:00 |
| Date Available | 2005-10-09 00:00:00 |
| Creation Date | 2005-08-18 19:35:04 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2005-08-25 17:18:25 |
| Document Title | Microsoft Word - R-Tron Mini 200mW User's manual.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Ttana |
Mini 200mW User’s Manual Mini 200mW User’s Manual Copyright Copyright of this manual belongs to R-TRON, Inc. Reproduction, distribution or revision of part or all of contents in this manual in any form without written permission of R-TRON, Inc. is prohibited. Registered Trademark R-TRON are registered trademarks of R-TRON, Inc. Other products and company names mentioned herein this manual might be trade marks or trade names of their respective owners. RF Repeater Band Selective Type Sprint PCS The results of using the information not mentioned in this manual or the risk of misunderstanding this document remain with the user. The information in this manual is subject to change due to function enhancement, change of design, etc. If you want the modified manual or have any question on this manual, please contact us with information below: Address : Customer Support Center, Jisan IT Venture Bldg., 2/3F, 1004-9/10, DoksanDong, Gumcheon-Gu, Seoul 153-829 , South Korea Tel : +82-2-896-4101 Copyright © 2005 R-TRON, Inc. All Rights Reserved R-Tron., Inc. 2/15 page Revision History Version Date of revision Ver 0.1 August 11, 2005 Reason for revision Revision Description RF EXPOSURE INFORMATION The antenna used for this transmitter must not exceed 12dBi and must be installed to provide a minimum separation distance of 20cm from all persons. Mini 200mW User’s Manual Contents 1. Overview -----------------------------------------------------------------------6 2. Repeater Design ----------------------------------------------------------7 2.1 System specifications --------------------------------------------------7 1. Mechanical and Environmental conditions --------------------------7 2. System Electrical Specifications ---------------------------------------8 A. Mini 200 Repeater ---------------------------------------------------------8 B. Mini 200 Antenna ----------------------------------------------------------9 3. Repeater Configurations -----------------------------------------10 3.1 Body -------------------------------------------------------------------------10 1. RF Unit ---------------------------------------------------------------------11 2. Main Control Unit (MCU) ----------------------------------------------12 3. DC Power Supply Unit (PSU) ----------------------------------------12 3.2 Antenna Unit -------------------------------------------------------------13 1. Donor Antenna (Yagi Antenna) --------------------------------------13 2. Distribution Antenna ----------------------------------------------------14 4. Block Diagram -----------------------------------------------------------15 4.1 Downlink signal path ------------------------------------------------15 4.2 Uplink signal path -----------------------------------------------------15 R-Tron., Inc. 4/15 page Mini 200mW User’s Manual 1. Overview Mini 200 will bring in those weak cellular phone signals reducing dropped calls and allowing you to use cell phones ...even deep inside a building. At the heart of all of our systems is a Mini 200 designed to improve coverage for wireless products within a facility. Combined with interior ceiling mounted low profile antennas, and an exterior mounted Yagi or Patch Antenna, the Mini 200 boosts the signal level for distribution within the interior areas, reducing the problem of dropped calls and signal fades. The Mini 200 can also be used in mobile applications, improving voice quality and range in areas of poor coverage. Figure 2.1 Fundamental configuration of Mini 200 All of our packages are engineered using only FCC approved amplified components. They are designed not to disrupt local wireless communication but to add service to areas that otherwise would not have the coverage that the customer requires. All of Mini 200 is easily installed. R-Tron., Inc. 5/15 page Mini 200mW User’s Manual 2. Repeater Design The Mini 200 is housed in an aluminum chassis that is waterproof for indoor use. The chassis has a design suited for indoor use. The Mini 200 has several RF amplifiers and components on a board with an aluminum body. Furthermore, the RF components are implemented within RF CMOS IC or MMIC technologies. A board that contains several RF amplifiers and components is shielded under a metal cover. This amplifier board is different types depending on the supported system. The followings are the Technical Specification of Mini 200, 2.1 System specification 2.1.1 Mechanical and Environmental conditions Parameter Specification Power supply AC 120V +30/20%(AC 96~156V), 50/60Hz ±5% Operating temperature 0 ~ +45℃ Humidity 10% ~ 85% Consumption power 159W RF connector N-female Size(W X L X H) 280 X 430 X 115 (mm) / 11.02 X 16.93 X 4.53 (inch) Weight Less than 33 lbs Table 2-1. Mechanical & Environmental Conditions R-Tron., Inc. 6/15 page Mini 200mW User’s Manual 2.1.2 Electrical Specification A. Mini 200 Repeater Parameter Frequency Band Specification Remark Down Link 1930 – 1970 MHz Total 40 MHz Up Link 1850 – 1880 MHz Total 40 MHz + 23 dBm (200mW) Total Power on CDMA Transmit Down Link Maximum Power Up Link Gain 80 dB ± 1dB Gain Range 70 ~ 80dB Gain Step 10 dB (1 dB Step) Noise Figure < 5 dB Bandwidth(Type 1) 5 MHz BW(Max. 3FA) Any 5MHz of Total 60MHz (A1,A2,A3,D,B1,B2,B3,E,F,C1,C2,C3) Any 10MHz of Total 60MHz Bandwidth(Type 2) 10 MHz BW(Max. 7FA) (A1A2,A2A3,A3D,DB1,B1B2,B2B3, B3E,EF,FC1,C1C2,C2C3) Any 15MHz of Total 60MHz Bandwidth(Type 3) 15 MHz BW(Max. 7FA) (A,A2A3D,A3DB1,DB1B2,B,B2B3E, B3EF,EFC1,FC1C2,C) Any 20MHz of Total 60MHz Bandwidth(Type 4) 20 MHz BW(Max. 7FA) (AD,A2A3DB1,A3DB1B2,DB,BE,B2 B3EF,B3EFC1,EFC1C2,FC1C2C3) Passband Ripple < 2.5 dB P-P Delay < 12 microseconds VSWR ≤1.5 In-band Nosie Spurious Emissions Operating Bandwidth Fc±885kHz ≥ -45 dBc RBW = 30 kHz Fc±1.98MHz ≥ -50 dBc RBW = 30 kHz < -13 dBm (Fc ± 2.25 MHz) RBW = 1 MHz Table 2-2. Repeater Features R-Tron., Inc. 7/15 page Mini 200mW User’s Manual B. Mini 200 Antenna Specification Parameter Donor Yagi Distribution Patch Frequency range 1850 ~ 1990MHz Frequency bandwidth 140MHz Antenna gain Beam width Omni(Optical) Min. 12dBi 2dBi 2dBi Horizontal Min. 28° 70° 360° Vertical Min. 28° 70° 70° Polarization Vertical VSWR Max. 1: 1.5 Max. 1 : 1.3 Max. 1 : 1.5 Power Capability 50Watts 10Watts 10Watts Antenna Connector Port Type N-Female N-Female N-Female Weight (g / lbs) 670 / 1.48 225 / 0.5 270 / 0.6 Dimension (W x H x D) (inch) 19.69 x 4.21 x 3.23 5.04 x 4.06 x 1.54 Φ 4.49 x 1.85 Impedance 50 Ω Table 2-3 Antenna Features R-Tron., Inc. 8/15 page Mini 200mW User’s Manual 3. Repeater Configurations The Mini 200 consists largely of a body and an antenna. The body of the Mini 200 has an RF unit, a main control unit and a power supply unit. Specifically, the antenna unit is separated as a donor antenna and distribution antenna. 3.1 Body The following is the picture of the body of Mini 200. Figure 3.1 A body of the Mini 200 R-Tron., Inc. 9/15 page Mini 200mW User’s Manual 3.1.1 RF Unit The RF Unit significantly functions an RF amplifier to amplify the weaken transmitted signal from a base station. Figure 3.2 An RF Unit of the Mini 200. R-Tron., Inc. 10/15 page Mini 200mW User’s Manual 3.1.2 Main Control Unit (MCU) The ARCU board is the control unit of the repeater. The ARCU board is used to supervise and control operational parameters such as gain control, ALC handling, etc. The ARCU takes care of alarms and the event log, password and logon, and many other procedures. Figure 3.3 A Main control unit of the Mini 200. 3.1.3 Power Supply Unit (PSU) The Power Supply Unit (PSU) roles in each needed dc power source as well as converter of ac power to dc power. Figure 3.4 Power supply unit of Mini 200. R-Tron., Inc. 11/15 page Mini 200mW User’s Manual 3.2 Antenna Unit The Mini 200 has two antennas, a donor antenna and a distribution antenna, to provide a good communication service. 3.2.1 Donor Antenna (Yagi Antenna) A donor antenna is used for receiving the transmitted signal from a base station. Figure 3.5 A Yagi antenna (Donor antenna) R-Tron., Inc. 12/15 page Mini 200mW User’s Manual 3.2.2 Distribution Antenna A distribution antenna serves to transmit the amplified signal to individual mobile station in the shaded area. A. Patch Antenna Figure 3.6 a Patch Antenna (Distribution Antenna) B. Omni Antenna (Optional) Figure 3.7 An Omni Antenna (Distribution Antenna) R-Tron., Inc. 13/15 page Mini 200mW User’s Manual 4. Block Diagram Figure 4.1 The block diagram of a band selective repeater Figure 4.1 shows the block diagram of a band selective repeater. This diagram is applicable to repeaters for CDMA systems. 4.1 Downlink signal path The downlink signal path, i.e. from the base station through the repeater to the mobile station, is described for Mini 200 in the above block diagrams. 4.2 Uplink signal path The uplink signal path, i.e. from the mobile station through the repeater to the base station, is identical to the downlink path but the other way round. Only some levels and component values differ. R-Tron., Inc. 14/15 page Mini 200mW User’s Manual Mini 200 Repeater System User’s Manual Copyright © 2005 R-TRON, Inc. All Rights Reserved Copyright of this manual belongs to R-TRON, Inc. Reproduction, distribution or revision of part or all of contents in this manual in any form without written permission of R-TRON, Inc. is prohibited. The information in this manual is subject to change for the reason of function improvement, design alteration, etc. without any prior notification. R-Tron., Inc. 15/15 page
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 About : uuid:46e3a0bb-4409-4fcc-a955-481d9b7e7024 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2005:08:18 19:35:04+09:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2005:08:25 17:18:25-07:00 Metadata Date : 2005:08:25 17:18:25-07:00 Document ID : uuid:b7e4f7a6-b952-471b-a0a7-92a5e2135c34 Instance ID : uuid:21bc721b-92fb-4fe8-a19c-bbef28f5d17e Format : application/pdf Creator : Ttana Title : Microsoft Word - R-Tron Mini 200mW User's manual.doc Page Count : 15 Author : TtanaEXIF Metadata provided by EXIF.tools