RADIOLAND TECHNOLOGY CC2530A1 Zigbee Module User Manual CC2530 A2 datasheet

Download:
Mirror Download [FCC.gov]
Document ID	2847566
Application ID	OB5kasmmFTCM6nbtsjoNUw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.94kB (324205 bits)
Date Submitted	2015-12-20 00:00:00
Date Available	2015-12-20 00:00:00
Creation Date	2015-12-14 16:53:13
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-12-20 09:20:49
Document Title	Microsoft Word - CC2530-A2 datasheet.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Rome Wong

RadioLand
Smart Wireless Solutions
CC2530-A1Module
General description
The CC2530-A1 RF Module is a low-power, highly integrated 2.4-GHz transceiver that
suitable for systems targeting compliance with worldwide radio-frequency. It’s a true
system-on-chip solution for 2.4-GHz IEEE802.15.4, ZigBee and RF4CE applications.
Features
2.4-GHz IEEE802.15.4 compliant RF transceiver
Programmable output power up to 4.5dBm
Accurate digital RSSI/LQI support
Suitable for systems targeting compliance with
worldwide radio-frequency
Data rate: 250kbps
256KB in-system programmable flash,
customization 32-,64-,128KB
Two 64 bytes FIFO for TX & RX buffer
CSMA/CA hardware support
Battery monitor and temperature sensor
AES security coprocessor
8KB RAM with retention in all power mode
32-kHz sleep timer with capture
Wide Supply-Voltage Range (2 V–3.6 V)
Applications
2.4-GHz IEEE 802.15.4 systems
RF4CE remote control systems (64-KB flash and higher)
AMR – Automatic Meter Reading
Two-way RKE – Remote Keyless Entry
Home and building automation
Wireless alarm and security systems
Industrial monitoring and control
Wireless Light Dimming
Wireless sensor networks
&RS\ULJKW#5DGLRODQG,QF
RadioLand
Smart Wireless Solutions
Electrical Characteristics
CC2530-A1 Module
ITEM
TEST REQUIREMENT
Voltage supply
2.0Ё3.6V
Center frequency
2405-2480MHz
2400Ё2483.5MHz
Frequency error
̈́50KHz
Modulation
O-QPSK
Output power
0dBm
Programmable
Receiving
sensitivity
-93dBm
High gain Mode
Receiving current
20.2mA
High gain mode
Receiving current
17.9mA
Standard mode
18.2mA
TX Power 0dBm
1uA
Sleep Timer ON
0.5uA
External interrupts
Transmit distance
>80M
BER<0.1%
Antenna
50ohm
module size
15*24mm
Transmitting
current
Sleep consumption
At power mode2
Sleep consumption
At power mode3
REMARKS
DC
RECOMMENDED OPERATING CONDITIONS
Operating ambient temperature range, TA
Operating supply voltage
MIN
-30
MAX
85
3.6
UNIT
°C
CAUTION:
ESD sensitive device. Precautions should be used when handing the device in order
to prevent permanent damage.
&RS\ULJKW#5DGLRODQG,QF
RadioLand
Smart Wireless Solutions
Pin Assignment
Module PIN
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
PIN name
GND
RESET
P0.0
P0.1
P0.2
P0.3
P0.4
P0.5
P0.6
P0.7
P1.0
P1.1
P1.2
P1.3
P1.4
P1.5
DP
DM
P1.6
P1.7
P2.0
P2.1
P2.2
VCC
GND
ANT
IC PIN
1,
20
19
18
17
16
15
14
13
12
11
37
36
35
34
214,24,27-31
1,
CC2530-A1 Module
Description
Ground
N_RESET active-low
Digital I/O
Digital I/O
Digital I/O RXD
Digital I/O TXD
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/Ō 20-mA drive capability
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O Debug data
Digital I/O Debug clock
23.6V power-supply
Ground
50ohm/External antenna
CC-Debugger and test boards
&RS\ULJKW#5DGLRODQG,QF
RadioLand
Smart Wireless Solutions
CC2530-A1 Module
Outline and Size
NOTE:
Additional information on the Texas Instruments CC2530
device can be found in the company’s latest datasheet release at
http:// www.ti.com/product/CC2530
&RS\ULJKW#5DGLRODQG,QF
FCC Statement
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmful
interference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,
usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing
measures:
Reorientorrelocatethereceivingantenna.
Increasetheseparationbetweentheequipmentandreceiver.
Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCCRadiationExposureStatement
Themodularcanbeinstalledorintegratedinmobileorfixdevicesonly.Thismodularcannotbeinstalledinanyportabledevice,forexample,
USBdongleliketransmittersisforbidden.
ThismodularcomplieswithFCCRFradiationexposurelimitssetforthforanuncontrolledenvironment.Thistransmittermustnotbecolocated
oroperatinginconjunctionwithanyotherantennaortransmitter.Thismodularmustbeinstalledandoperatedwithaminimumdistanceof20
cmbetweentheradiatoranduserbody.
IftheFCCidentificationnumberisnotvisiblewhenthemoduleisinstalledinsideanotherdevice,thentheoutsideofthedeviceintowhichthe
module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following:
“ContainsTransmitterModuleFCCID: 2AGUTCC2530A1OrContainsFCCID:2AGUTCC2530A1ā
whenthemoduleisinstalledinsideanotherdevice,theusermanualofthisdevicemustcontainbelowwarningstatements;
1.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference.
(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
Thedevicesmustbeinstalledandusedinstrictaccordancewiththemanufacturer'sinstructionsasdescribedintheuserdocumentationthat
comeswiththeproduct
Any company of the host device which install this modular with limit modular approval should perform the test of radiated emission and spurious emission
according to FCC part 15C : 15.247 and 15.209 requirement,Only if the test result comply with FCC part 15C : 15.247 and 15.209 requirementˈthen the
host can be sold legally.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:12:20 09:20:49-05:00
Create Date                     : 2015:12:14 16:53:13+08:00
Metadata Date                   : 2015:12:20 09:20:49-05:00
Format                          : application/pdf
Title                           : Microsoft Word - CC2530-A2 datasheet.doc
Creator                         : Rome Wong
Document ID                     : uuid:97d26793-3977-4927-b804-c1ac1a5b006d
Instance ID                     : uuid:cad47431-1807-416a-a037-a1ef01100fb6
Page Count                      : 5
Author                          : Rome Wong

EXIF Metadata provided by EXIF.tools