RCA Communications Systems RDR4300V Digital Two-Way Radio User Manual

RCA Communications Systems Digital Two-Way Radio

User Manual

Communications SystemsRDR4300 SeriesDigital Radios QUICK START GUIDEB4323LILi-Ion Battery (2550 mAh)CH4301Desktop RapidChargerPS4301Power SupplyBC4300Belt ClipAntennaANH4300V - VHFMICRDR4320Handheld RadioRDR4380Handheld RadioRDR4350Handheld RadioWhat’s Included:Attaching the Battery:Removing the Battery:Attaching audio accessory / programming cable:Attaching the Antenna:Attaching the Belt Clip:1. While laying flat, put the battery into the radio as shown, horizontally push to the top along the aluminum slot.2. As shown, up the battery latch forward until a click is heard.1. As shown, hold the radio like this.2. As shown, push up the battery latch with another hand.3. Slide the battery as arrow direction shown.1. Rotate the screws counter-clockwise to remove them.2. Align the screw holes on the belt clip with those on the radio’s body, and then tighten the screws clockwise.Note: To remove the belt clip, loosen the screws.1. Open the accessory jack cover. As shown, align the plug with the accessory jack, then connet it.2. As shown, tighten the screw clockwise on the plug.Note: To remove accessories, loosen the screw counter-clockwise.1. Turn the antenna clockwise to attach it.Note: To remove the antenna, rotate it counter-clockwise.332222221111111P1 Key (hot key) 2PTT Key (transmit key)3P2 Key (hot key) 4Emergency Call Key5Antenna 6LED Indicator7Channel Knob 8Radio On-O/ Volume Knob9Earpiece (RDR4350/RDR4380 only) 10 Simplex Microphone (RDR4350/RDR4380 only)11 LCD Display (RDR4350/RDR4380 only) 12 Function Keypad (RDR4350/RDR4380 only)13 Speaker 14 Numeric Keypad (RDR4350/RDR4380 only)15 Duplex Microphone (RDR4350/RDR4380 only) 16 Battery Latch17 Accessory Jack Cover 18 Strap hole19 Belt Clip 20 Battery21 Battery Pole Piece 22 Accessory Jack23 Micro SD Encryption Card CoverProdcut Overview512341617181920212223678910111213131415RDR4320 RDR4350 RDR4380Programmable Keys [P1] key, [P2] key, four direction keys, key, can be set as function or menu shortcut keys by your RCA dealer. The default state of [P1] and [P2] shortcuts are for high-low power switching. You only need to press the corresponding shortcut key to quickly access the needed menu or function.Function/Enter keyReceive/Call keyBack/Option keyHangup keyDirection keyFunction Keypad (RDR4350 / RDR4380 models)
LED indicator and charging status in chargerLED Indication Charging StatusLED Flashes Red Slowly Standby (no load)LED Glows Red ChargingLED Glows Orange 85% ChargedLED Glows Green Fully ChargedLED Flashes Red Rapidly ErrorSTATUS INDICATION IN RADIO (RDR4350 / RDR4380 models)LCD IconIcon Name Icon Radio StatusBattery Strength Icons Low battery powerMore bars indicate more battery powerRSSINo SignalMore bars indicate better signal strengthMessage IconsNew message/unread messageInbox is fullOperation Mode IconsTMO modeDMO modeAnalog modePower IconsTransmit with lower powerTransmit with middle powerTransmit with high powerProfiles IconSilent modeRingVibrateCustomAudio Accessories Audio accessory has been connectedCall Status Icon On the phoneGroup Selection Icon Select talk groupEncryption Icon Encryption ONRadio LED indicatorLED Indication Radio StatusLED Glows Red Transmitting the callLED Glows Green Receiving the callLED Glows Red On Both Sides Phone CallLED Flashes Red Slowly Low Battery PowerLED Flashes Green Slowly Channel is IdleLED Glows Orange Channel is BusyBattery indicatorBattery Usage Status Indicator Light StatusPower > 40% Battery indicator light shut down10% < Power < 40% Green light flashPower < 10% Red light flashNo Power LED indicator light and battery indicator light shut downBasic OperationsTurning on/o radioRotate the Radio On-O/Volume knob clockwise / counter-clockwise until a click is heard to turn on/o the radio.Adjust the volumeAfter turning the radio on, rotate the Radio On-O/Volume knob clockwise to increase the volume or counter-clockwise to decrease the volume.Selecting a channelAccording the series number on the Channel Knob to rotate and select the desired channel. While rotating the knob, there is an automated channel number Voice prompt.Mode SwitchThrough Channel Selector knob. Each channel of the radio can be set as analog channel or digital channel by dealer. The user can set up through CPS software.CallGroup CallTalk group can be set by dealer in advance the operation methods are the same under DMO mode and TMO mode.• Transmitting a group call1. Select the desired talk group through Channel Knob.2. Hold down [PTT] key to transmitt a group call.• Receiving and replying a group callYou can receive the group call without any key operation. If reply is needed, please hold down [PTT] key after the speech of the other side and then speak to microphone.Care and CleaningTo guarantee optimal performance as well as a long service life of your radio, please follow the tips below.Radio CareKeep the radio far away from substances that can corrode the electronic circuit.Do not hold the radio by its antenna or headset cable directly to prevent damage to its normal use.Attach the accessory jack cover whtn the radio is not in use.Radio CleaningClean up the dust and fine particles on the radio surface and charging piece with a clean and dry lint-free cloth or a brush regularly.Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage. Make sure that the radio is completely dry before use.NOTE; Turn o the radio and remove tha battery before cleaning.Charging the BatteryCharging Operation StepsUse only the charger and battery specified by RCA Communications Systems. Charger LED can indicate the changing progress.1. As shown, Connect the power adapter to AC power socket and the jack at the back of the charger.2. As shown, insert battery or radio with battery in the charger, and make sure there is good contact between battery and charging terminals.3. The charging process starts when LED glows red.4. LED glows green to indicate that charging is complete.NOTE: The standard 2250mAh battery charging normally takes about 4 hours, for optimal battery performance. Initial charging for new battery should take up to 5 hours.2121
Bluetooth interfaceandoperatinginstructions:1.ON/OFFcontrolandoperationinterfaceClickthe"Menu"button,select"Settings",select"Bluetooth",thatistoentertheBluetoothswitchoperationinterface,asshownbelow(Figure1.1.1). Figure1.1.1Figure1.2.12. Bluetoothdevicesearchandclearoperationinterface,asshowninFigure1.2.1.Description：Theinterfacehasthreeoptions"Searching","ClearAll","VoiceDevice";Click"Searching"tofindtheBluetoothdevice；Click"ClearAll"toclearthepreviousBluetoothpairinginformation;"clearinformation"optionwillcleartheBluetoothmodule'sexistingpairinginformation.Itisrecommendedtousethisoptionifmultipleconnectionsareunsuccessful,andthenpairagain,orclearthemessageandconnectagainwhenconnectinganewdevice.If"VoiceDevice"appears,theBluetoothdeviceisfoundbutitisnotconnected.Ifadeviceissuccessfullyconnected,asshowninFigure1.2.3Figure1.2.3
3.SearchBluetoothinterface Figure1.3.1Figure1.3.2In<BluetoothHome>Select"FindDevice"Canenterthe<searchinterface>,Enterthesearchinterface,themodulewillenterthesearchmode,Ifanydeviceisfound,itwillbedisplayedbelow,asshowninFigure1.3.2Thefollowingfigureshowsthatthedevicehasbeendiscoveredandisbeingconnected,asshowninFigure1.3.3. Figure1.3.3Figure1.3.4Thefollowingfigureshowsthattheconnectionissuccessful,asshowninFigure1.3.44. NOTE: (1)One‐on‐oneoperationisrequiredforpairing.DonotopenmultipleterminalsandBluetoothdevicesforpairingatthesametime.(2)Eachtimeyoure‐pairtheconnecteddevice,pleaseselect"ClearAll",cleartheoriginalpairinginformationofthemodule,andthensearchforthedevicetoperformpairingconnection.(3)PleaseusethesupportingBluetoothheadsetprovidedbytheterminalmanufacturertoavoidinconveniencetoyournormaluse.Thankyou!
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environment exposure limits always adhere to the following procedures. Guidelines: • Do not remove the RF Exposure Label from the device. • User awareness instructions should accompany device when transferred to other users. • Do not use this device if the operational requirements described herein are not met. Operating Instructions: • Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50 % of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). • Hold the radio in a vertical position in front of face with the microphone (and the other parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important because RF exposures decrease with distance from the antenna. Antenna should be kept away from eyes. • When worn on the body, always place the radio in a RCA’s approved clipapproved body-worn accessories is important because the use of RCA’s or other manufacturer’sries may result in exposure levels, which exceed the FCC’s occupational/led environment RF exposure limits. for this product. Using non-approved accessocontrol

Navigation menu