RCA Plasma Television Manual L0108046

User Manual: RCA RCA Plasma Television Manual RCA Plasma Television Owner's Manual, RCA Plasma Television installation guides

Open the PDF directly: View PDF .
Page Count: 60

Download
Open PDF In Browser	View PDF

Safety

Information

Precautions

FCC Information

Please read this manual carefnlly before using your Monitor and
keep the manual handy for future reference.

•

WARNING
TO PREVENTFIRE OR SHOCK HAZARDS, DO NOT
EXPOSE TEllS UNIT TO RAIN OR MOISTURE.ALSO 110
NOT'USE THIS UNIT'S PLUG WITH AN EXTENSION
CORD RECEPTACLEOR OTHER OUTLETS,UNLESSALL
PRONGS CAN BE FULLYINSERTED. REFRAINFROM
OPENING THE CABINET AS THERE ARE HIGIq-VOLTAGE
COMPONENTS INSIDE. REFERSERVICINGTO QUAI,IFIED
SERVICEPERSONNEL.

Industry

Canada Compliance

Notice

This Class B digita! apparatus meets all requirements of tilt'
Canadian Interference-Causing Equipment Regulations

Declaration of Conformity
This de_ice complies with Part 15 of the FCC rules. Operatkm is
subject to tile following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Product: Cinenm Screen I)isplay

FCCRegulationsstatethat unauthorizedchangesor
modifications to this equipment may void the user's authority
to operate it.
This equipment has been type tested and found to comply
with the limits tk/r a Class B Digital Device in accordance
with the spccificatiuns in Part 15 of the FCC rules. These
rules are designed to provide reasonable protection against
radio and television interference in a residential installation.
This equipment generates and can radiate radio flequency
and. if not installed and used in accordance with the
instructions, may cause harmful interference to radio
con_munications. However. there is no guarantee that
interDrence _,ill not occur in a particular installation.
If this equipnlent does cause interference to the radio or
television reception (which you can detennine by turning the
equipment off"and on). try,to correct tile interference by one
or

nlore

•

of the

lk)lk)wing

nleasures:

Reorient or relocate the receiving antenna (.that is.
the antenna for the radio or television that is
"receMng" the interterence/.
Change the position
the radio or television
tile interference.

of the monitor with respect
equipment

that is receiving

Equipment Cl:tssification: Class B Conlputer Periphera[
Model: PHI)=,0300

Mo_e tile monitor away fron/ the cquipnlent
receiving tile intcrlc+rence.

\x:_,hereby declare that the equipment specified above contorms to
the technical smndaMs as specified in file FCC iT.des.

I)lug tile

inonitor

receiver

and

Thon/son multin/cdia Inc.
10330 N. Meridian St.
Indianapolis. IN i6290
PIione: 1-800 133-8974
Cable "ry Installer: This renlinder is ptovided to call )our
attention to Article 820-40 of the National Electrical Code tScctiun
"_t ot tile Canadian Electrical Code. Parl 11 xxhich pro\idcs
guidelines Ic_r proper grounding and, in ['nuticulaL specifics that
tilt' cah[e gruutld s]/a][ he c(/nnccted 1o lhe grounding s}rstelll of
t]lC huildh/g

as cIosc tl) IIle poi[/t ot cable enlQ :is practical

into a dilf_'rent

the equipment

wan

outlet

arc on cliCk:rent

so the
hnlnch

circuits.

If these n/ensures do not eli[llinale intcl-lE.rence,please
consuh your dealer or an experienced radio television
technician lor additional suggestions Also. tile Fedend
('omnltmkati{_ns Commission has prepared a helpful
hooklet. "tIo;x 1o Identify and Resolxc Radio TV Inlerfcrence
Iqoblenls." This hooklcl is a',ailahle fiom the US.
Go_crnnlcra Prmth/g Office. Washington D C., 20t02. Please
specif} stock ntln/l)t.+r 004 0011-1)034q-t when ordering copies.

Warnings

and Safety Precautions

The monitor is designed and manul_ctured
to provide
long, trouble-free service. No maintenance other than
cleaning is required. Use a soft dry cloth to clean the
panel. Never use solvents such as alcohol or thinner to
clean the panel surface.
The display panel consists of fine picture elements (cells).
Although the display panels are produced with more than
99.99 percent active cells, there may be some cells that do
not produce light or remain lit.
For operating safety and to avoid damage to the unit, read
carefully and observe the following instructions.
To avoid shock and fire hazards:
1.

Provide adequate space for ventilation to avoid
internal heat build-up. Do not cover rear vents or
install in a closed cabinet or shelves.
The unit is equipped with cooling fans. If you install
the unit in an enclosure, be sure there is adequate
space at the top of the unit to allow hot air to rise and
escape.

IMPORTANT TIPS: Caring for Your
Monitor
To avoid

Do not use the power cord plug with extension cords
or outlets unless all prongs can be completely inserted.

Do not expose

Avoid damage to the power cord, and do not attempt
to modify the power cord.

operating

life:

Use only with 120V 50/60Hz AC power supply.
Continued operation at line vohages greater than 12(1
Volts AC will shorten the life of the unit, and might
cause a fire hazard.

Handle

Locate set away from heat, excessive
sunlight.

Protect the inside of tire trait from liquids and small
metal objects. In case of accident,
unplug the unit and
have it serviced
by an authorized
service center.

Do not hit or scratch the panel surface as this causes
flaws on the surface of tire screen.

For correct installation and mounting it is strongly
recommended
to use a trained, attthorized dealer.

Like all phosphor-based
display devices, monitors can
be susceptible to uneven phosphor aging under cellain
circumstances. Certain operating conditions, such as
the continuous display of a static image over a
prolonged period of time, can result in uneven
phosphor aging if proper precautions are not taken. To
protect your investment in this monitor, please adhere
to the following guidelines and recommendations
for
minimizing the occurrence of uneven phosphor aging:

persists, contact your dealer for service.

and prolong

If the monitor becomes too hot, the overheat protector
will be activated and the monitor will be turned off. If
this happens, turn off"the power to the monitor and
un-plug the power cord. If the room where the
monitor is installed is particularly hot, move the
monitor to a cooler location, and wait for the monitor
to cool for 60 minutes.
If the problem

damage

the unit carefully when installing it.
dust, and direct

Always enable and use your computer's screen saver
function during use with a computer input source.
Display a moving image whenever

possible.

unit to water or moisture.
Always power down the monitor when you are
finished using it.
If viewing with a 4/3 aspect ratio for long periods of
time, set side gray level at 3 or 4.

Unplug unit during electrical storms or if unit will not
be used over a long period.
Do not open the unit which has potentially
high voltage components inside. If the unit
from opening the cabinet the warranty will
Moreover, there is a serious risk of electric

dangerous
is damaged
be void.
shock.

If the monitor is in long term use or
continuous operation take the following
measures

to reduce

phosphor

aging:

Do not attempt to service or repair tire unit. Tmnr is
not liable R)r any bodily harm or damage caused if
unqualified persons attempt service or open the back
cover. Refer all service to authorized Service Centers.

the likelihood

of uneven

Lower the BRIGHTNESS and CONTRAST levels its
much as possihle without impairing image readability.
Display an image with many colors and color
gradations (i.e. photographic
or photo realistic
images).
Create image content with minimal contrast betv, een
light and clark areas (fi)r example, white characters on
black backgrounds).
Use complementary
or pastel
color whenever possible.
•

Avoid displaying images with t)w colors and dislinct.
sharply defined borders between colors.

Contents
Safety

Information

...................................................................................

Warnings and Safety Precautions .............. _....................................................................

IMPORTANT TIPS: Caring for Your Monitor ...................................................................

Getting

Started

.........................................................................................

Contents of the Package ..................................................................................................

Part Names and Functions-

Front View .........................................................................

Part Names and Functions - Back View ..........................................................................

Battery Installation ...........................................................................................................

Connecting an HD Receiver .............................................................................................
The Back of the HD Receiver .....................................................................................

9
9

Connecting Your VCR Or Laserdisc Player .....................................................................

Connecting Your DVD Player .........................................................................................

Connecting a Personal Computer ..................................................................................

Connecting Components to the Monitor ......................................................................

Connecting External Speakers to the Monitor .............................................................
A Quick Tour of the Remote Control .............................................................................

12
13

Using Your Remote Control .....................................................................................
Inserting Batteries ..............................................................................................
Programming the Remote .......................................................................................
Find Out If You Need to Program the Remote ................................................
How to Program the Remote ............................................................................
Using Automatic Code Search ...........................................................................
Using Direct Entry ..............................................................................................
How To Use the Remote Control

15
15
15
15
16
16
t7

After You've Programmed It ...................................................................................
Programmable Codes for the Remote Control .......................................................

t7
18

The Menu System ...................................................................................

Basic Operations .............................................................................................................
Power ........................................................................................................................

22
22

Volume ......................................................................................................................
Mute ..........................................................................................................................

22
22

Navigating the Menus .............................................................................................
The Multi-Screen Feature ........................................................................................
Selecting the Input Signals to be displayed .....................................................
On-Screen Menu Operation ....................................................................................
The PICTURE QUALITY Menu .........................................................................................
Setting the Picture Mode .........................................................................................
Adjusting the Picture Settings in MEMORY Mode .................................................
Setting the Color Temperature ................................................................................
Reducing Noise in the Picture .................................................................................
The AUDIO Menu ............................................................................................................

22
23
24
24
2S
25
26
27
28
29

The SCREEN Menu ..........................................................................................................

Selecting a Viewing Size ..........................................................................................
Adjusting the Picture Position and Size ..................................................................
Auto Picture ..............................................................................................................

30
31
31

Contents
The FUNCTION Menu ......................................................................................................

On-Screen Displays ...................................................................................................
Adjusting the Position of the Menu Display ..........................................................
Setting the POWER SAVER for Computer Images ..................................................
The POWER/STANDBY Indicator ..............................................................................

32
32
33
33

Setting the Gray Level for the Sides of the Screen ................................................
Adjusting for Flickering with Film Mode ................................................................

34
34

Adjusting the Display in RGB3 Input Mode ............................................................
Setting the Screen Saver ..........................................................................................
Setting the PLE...................................................................................................
Turning Orbiter On ............................................................................................
Setting the Inverse .............................................................................................
Resetting to Default Values .....................................................................................
The OPTIONS Menu ........................................................................................................
Setting the Audio Inputs .........................................................................................
Setting the BNC Connectors ....................................................................................
Setting a Computer Image to the Correct RGB
Select Mode .....................................................................................................
Setting the Monitor to the correct
HD Receiver Mode ...........................................................................................

35
35
35
36
36
37
38
38
38
39
40

Setting the Picture Size for RGB input signals ........................................................
The SETUP Menu .............................................................................................................

40
41

Confirming the Frequencies, Polarities, mode
and resolution of Input Signals .........................................................................
Selecting the Language for the Menus ..................................................................
Setting the Video Signal Format .............................................................................

41
42
42

The AUTOTUNING

SETUP Menu ....................................................................................

Autotuning the Component Buttons on he Remote Control ................................
SLEEPTIMER ....................................................................................................................

43
44

Setting the Sleep Timer ............................................................................................
Cancelling the Sleep Timer ................................................................................

44
44

Other

Information

..................................................................................

Installing the Monitor ....................................................................................................
Attaching optional mounts or stand to the Cinema
Screen monitor ......................................................................................................

Connecting Your PC Or Macintosh Computer ..............................................................
Mini D-sub 15 Pin VGA Signal Composition ...........................................................
Specifications ..................................................................................................................

47
47
48

Troubleshooting ..............................................................................................................

The Monitor Menu System ............................................................................................
Supported Resolution ....................................................................................................

50
52

RCA Limited Warranty ....................................................................................................

Accessories ......................................................................................................................

Index ................................................................................................................................

I_ HAPTER

Connections

and Setup

Chapter

Overview:

•

Contents

of the Package

•

Part Names and Functions

•

Battery Installation

• Connections
• A Quick Tour of the Remote

Control

Connections
Contents
Cinema

,_creen

Power

cord

Ferrite

cores

and

Setup

of the Package
monitor

RGB cable (Mini D-Sub 15-pin to Mini D-Sub 15- pin connector)
Remote control unit with two AA batteries
User's manual

It is highly recommended
that you have your monitor
the monitor yourself, refer to the Reference section.

installed

by a professional.

If you are installing

NOTE: If you are planning on attaching tile floor stand to your monitor (and not the optional wall mount unit) you may
want to use the safety metal fittings (provided) to give your monitor extra stability.
The safety metal fittings attach to the back of the screen and can then be used to secure the monitor to the wall with strong wire.
Contact your trained, authorized
In order to conform
cable (see below).
If you are connecting
FCC standards.

Attaching

to mandatory
a computer

dealer for professional
FCC standards,

installation.

you must attach the supplied

ferrite cores to both ends of the power

to the monitor, you must attach the ferrite cores to both ends of the DVI cable to meet

the ferrite cores

Set the ferrite cores on the both ends of the DVI cable (supplied), and one end of the power cable (supplied).
tightly until the clamps click. Use the band (supplied) to secure tbe t;errite core.

Close the lid

DVI cable
(not supplied)

band

core (small)

power cable

(supplied)

band

connector

core (small)

band

(monitor

side)

core (large)

Chapter

Connections

Part Names

and Functions

and

Setup

- Front View

VOLUM!
iNPUT •

MEnu°OK - If no menu is displayed,
menu. If a menu is displayed,
press
highlighted
option.
2.

VOLUME

Adjusts

the

volume. When

menu is being displayed,
(A and V).
3,

brings up the
select a

GoBACK

VIDEO2 _
RGB2**_

VIDEO3 _
CMPNTI*
RGBI _
CMPNT2

moves hig.hlight up and down

\Vilen a menu is being displayed,
through menu (._ and _. ).

t\_;l(,.

}oft can set zip (=IllPI_T1 or RGB2,

When an on-screen
you to the previous

menu is being
menu.

but .or

displayed,

both.
returns

I_OWER/STANI)BY indicator - When the power is on,
the 1 _ 1 is green. When the powvr is in Standby
\lode, tile light is red.

used to navigate
(}.

INPut • Go BaCK Switches tile input, in tire i'ollowing
order:
_.VIDEO1 _
RGB3 _

oil-screen

LEFT/-ANDRIGHT/- - When Zoom mode is on (press OK
oil tile remote to turn ZOOM on and bFing up tile
zoom icon) press Right/+ to enlarge the image or I.eti to reduce tile image.

Chapter

POWER• STANDIY

Turns

the

tllonitor's

power

and

off.

Connections

and

Setup

Part Names and Functions - Back View

RIGHT

LEFT

@ @ @

--3

I
I

, ®

EXTSPEAKERL and R - Connect speakers here.

I
I

AC IN - Connect

the included

VIDEO 1, 2, 3 - Connect VCRs, DVDs, Laserdiscs, etc. here.

AUDIO1, AUDIO2, AUDIO3 - Connect audio here.

CMPNT1 - Connect

RGB1 - Connect HD receiver here.

BNC SELECT-

power cord here.

Laser discs, etc. here.

I
I
I

RGB2: Inputs the analog RGB signal.
CMPNT2: Connect DVDs, Laserdiscs, etc. here.

I
I
I
I

RGB3 (DVI 29pin) - Inputs a digital RGB signal.

CONTROLLOCK When CONTROL LOCK is in the ON position, the buttons on the
monitor's control panel don't function.

10. REMOTE CONTROL - This jack is for connecting a wired remnte, which is primarily _'br
commercial applications. The remote included with your monitor is wireless and doesn't
require connection to the monitor.

®
®

11. EXTERNALCONTROL - This terminal is used when the nronitor is controlled by external
equipment.

®
Chapter1

Connections

Battery

Setup

Installation

Remove the battery compartment
control.
•

Insert batteries.
correctly.

•

Replace cover.

Connecting
Installingthe batteries

and

cover from the back of the remote

Make sure the polarities

(+ and -) are aligned

an HD Receiver

RCA and PROSCAN HD (high definition) receivers come equipped with an
RGB output jack for optimum quality. Using the RGB cable provided,
connect the HD MONITOR OUT jack on the back of your HD receiver to
the RGB1 (HD MONITOR IN)/AUDIO1 IN jack on the back of the
monitor.
If your HD receiver does not have the type of jack pictured on the right,
connect your HD receiver using the component video jacks and RCA
cable.
For more information
user's manual.

on HD receiver connections,

see your HD receiver

The Back of the HD Receiver

RGB cable

HD MONITOR OUT jack

Chapter

Connections

and

Setup

Connecting Your VCR Or Laserdisc
Player
Use common RCA cables (not provided) to connect your VCR or laserdisc
player to your monitor. To connect your VCR or Laserdisc player:
1.

Turn off the power to the monitor and VCR or laser disc player.

Connect one end of your RCA cable to the video output connector
on the back of your VCR or laser disc player. Connect the other end
to the video input on the monitor.

RCAcables (audio/videocables)are sold as a bundled set.

Use standard RCA cables to connect the audio from your VCR or
laser disc player to AUDIO2 input jacks on the monitor (if your VCR
or laser disc player has this capability). Be careful to keep your right
and left channel connections correct for stereo sound.
Turn on the monitor and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player user's manual./br more
information about your equipment's tJideo output requirements.

To connect

Connecting Your DVD Player

your monitor to a DVD player:

Turn off the power to the monitor and DVD player.

Use a standard video cables to connect your DVD player to the CMNT1 input on the monitor,
or use the DVD player's S-Video output. (Use a standard S-Video cable to connect to the SVideo input on the monitor.)

Turn on the monitor and the DVD player.

Connecting
If you have a computer

a Personal

with digital RGB output,

For IBM VGA (or compatible)
monitor.

Computer

or Macintosh

connect

(or compatible)

it to the RGB3 jack on the monitor.
connect

to the RGB1 jack on the

Chapter

Connections

Connecting

Components
....

//
/

.,,,,,o...,

........

VIDEO

and

Setup

to the Monitor

VIDEO 2

/
i

VIDEO 3

/
LIMONO)

VCR or Laser Disc Player

D I

DVD Player

LIMONOl

Signal cable (supplied)
To Mini D-Sub15 pinconnectoronthe
PlasmaSync 4210W

RGB 1
I

°1

CRII PR

Y IIY

IBM VGA or Compatibles
CBII P_
YNC

ENC
I

i
\

LIMONOI

\
\

Macintosh or Compatibles

RG_ 3
DIGITALRG8

Personal computer with a digital RGB output

\
\

CONTROL
LOCK

\
\

onJ_. off_=-

x
\
\

REMOTE
CONTROL

___

Monitor adapter for Macintosh

Chapter

EXTERNAL
CONTROL

Connections

and

Setup

Connecting External Speakers* to the Monitor
The monitor doesn't have internal speakers, so in order to get sound you must connect
can reproduce sound from VIDEO or RGB signal sources.
External speakers may be connected
amplifier to the audio outputs.

external

speakers,

directly to the SPEAKERS terminals or indirectly by connecting

External speakers

a stere{) system

CAUTION: Unplug the monitor and all connected components before connecting external speakers, Use only speakers
with 6 to &ohm impedance and a power output rating of 7 watts or more.
To connect

external

speakers

directly to the monitor:

Strip the ends of the speaker

wires.

Press down the tabs below the speaker terminals
wire connection.

[a]

Connect the right speaker
RIGHT +.

(located

[b]

Connect

the right speaker

[c]

Connect

the left speaker negative

[d]

Connect

the left speaker

and insert the speaker

wire and release the tab to secure the speaker

at right side of the monitor when viewed

from the front) positive (+) ,.',ire to

negative (-) wire to RIGHT -.
(-) wire to LEFT-.

positive wire (+) to LEFT+.

*'Not included

Chapter

Connections

and

Setup

A Quick Tour of the Remote Control
VCR1

DVD

ON*OFF

VCR2

MONITOR

AOX DDRSVR

&&°&&
MUTE

WHO'MULTI

zOOM/N

@ OOMO
©
SLEEP

In alphabetical

order

ANTENNA When the remote is in HD RCVR mode, switches the HD
receiver between Antenna A and Antenna B.
Arrows
Use the arrows to navigate through
the Zoom pointer in Zoom mode.

the menu screens and moves

AUX (auxiliary) You can program this button to control any one of the
following: a cable box; most GE, RCA, and PROSCAN audio components;
a laserdisc player; a VCR; or a satellite receiver. Press this button to
operate the component you've programmed to work with the AUX button.

GO BACK

GUIDE

INFO

CH+/CHChanges channels on the HD receiver when the remote is in
HD receiver mode. When the Zoom mode is active, zooms in (CH+) or
out (CH-).
CINENA Press to select one of four screen sizes to suit the type of input
you're watching.

CLEAR

,0,0
'0
,0,0,0
INPUT

REVERSE

CLEAR Clears on-screen

PLAY

STOP

CMPNT1 and CMPNT2 inputs.

GO BACK In HD receiver mode, returns you to the previous channel.
When in the menu system, returns you to the previous menu.

FORWARD

GUIDE
RECORD

displays and returns you to normal viewing.

CMPNT Toggles between
ANTENNA

©°0

NOTE: When watching the HD receiver, screen size is controlled
through the HD receiver menu system.

In HD receiver mode, brings up the on-screen

program guide.

PAUSE

INFO
CINEMA ROB CMPNT VIOEO

OO00
L____ SOURCE

Brings up channel

INIrtyr

Changes

information.

the video input.

MENU Brings up the on-screen

menu.

MONITOR Turns the power to the monitor on and puts the remote in
Monitor mode so you are able to control the monitor.
MUTE Reduces sound to an inaudible
Numbers

Use the number

level.

keys to make numerical

entries.

OK/ZOOM
When in Monitor mode (press the MONITOR button) and
using on-screen menus, press OK to select a highlighted menu function.
When there are no on-screen menus displayed, press OK to bring up the
zoom pointer. Using the arrow buttons, position pointer on the part of the
screen you want to zoom on, then use the CH+/- buttons to zoom in/out.

Chapter1

Connections

VCR1

DVD

and

OR-OFF

VCO2

MORITOR

AOX HDRCVR

&
MUTE

WHO"MULTI

Setup

ONeOFF Toggles power on and ()ft 12)rthe components that you have
programmed. For example, if you are in VCR mode, turns VCR on and
off.
REVERSE, PLAY, FORWARD, STOP, PAUSE, RECORD (transport
keys)
Use with components
programmed
to work with your remote control
(VCR, DVD player, audio components).

RGB Depending on how you set up the monitor, toggles between
RGB2*, and RGB3.

RGB1,

*Note: You can set t@ CMPNT2 OR RGB2, but not both. lf CMPNT2 is
set up, RGB2 will not appear when you use the RGB button.
ZOOM
O_
SLEEP

GO BACK

GUIDE

INFO

0
_/_

_OK_

?_.

SLEEP Brings up the sleep timer, which is used to turn the monitor off
automatically after a set amount of time.
VCR1, VCR2, DVD, HD RCVR,
buttons used to put the remote
that particular component. The
(VIDEO or RGB) or Autotuning

CLEAR

VOL
VIDEO
inputs.

7(_8_
ANTENNA

REVERSE

PLAY

RECORD

STOP

ROB

r_
L

FORWARD

CMPNT

PAUSE

VIOEO

=,
SOURCE-----J

Adjusts the w)lume.

Selects whatever

WHO*MULTI

INPUT

CINEMA

MONITOR These are the component
control into the correct mode to operate
correct video source must first be selected
must be set up.

component

is hooked

up to the video source

When in Monitor mode. activates the multi-screen

feature.

The Multi-screen feature allows you to select a screen mode for viewing a
single picture, side-by-side pictures, or picture-in-picture
(PIP). Brings tip
personal viewer profiles for sonle components.
ZOOM IN When in zoom mode (press the MONITOR button an then
the OK button to access zoom mode) enlarges the picture. When in zoom
mode, use the arrow buttons to pan and scan the entire picture.
ZOOM

OUT

When

in zoom

mode/prcss

the MONITOR

button

the OK button to access zoom mode) decreases
the magnification
picture. If picture is distorted,
ZOOln out to restore to llorma]

an then
of thE:

Chapter

Connections

Using Your Remote
Inserting

and

Setup

Control

Batteries

Remove tire battery compartment

Insert batteries (included)
conrpartnrent.

Replace the battery compartment

cover from tire renrote control.

as shown on the diagram inside the battery
cover.

Use your remote control from a distance of about 7m/23 feet from the
monitor's remote control sensor and at a horizontal angle of within 30 °.
The remote operates on line of sight, so if there is anything blocking the
path between the remote and the remora control sensor on the front of
the monitor, the remote may not work.
Installing the batteries

•

Don't expose the remote control sensor on the front of the monitor
to direct sunlight or strong artificial light.

•

Don't get the remote control wet.
Avoid heat and humidity.
When not using tire renlote
batteries.

Programming

for a long period of time, remove the

the Remote

The universal remote control that came with your monitor is already
programnred to operate most RCA, GE, and PROSCAN VCRs, DVD
players, laserdisc players, and satellite receivers. This remote is also
capable of operating many other brands of remote-controllable
electronic
components, but you must program it to do so.

Find Out If You Need to Program
t

Approx.
7m/23 ft.

....

the Remote

To determine whether the universal remote needs to be progranrmed,
turn on one of your componems, such as a VCR. Point the renlote control
at the component and press the component button (for example, the VCR
hutton). Now press the ON.OFF button on the remote. If the component
doesn't turir off. you need to program the remote control in order for it to
operate that component.

.:il

Chapter1

Connections

and

Setup

How to Program the Remote
There are two ways to program the remote

control: automatic

code search and direct entry.

Using Automatic
1.

Turn on the component
receiver, etc.)

Press and hold the component button that corresponds to the
component you want the remote to operate (VCR, HD receiver, etc.).
While you hold down the component button, press and hold
ON-OFF (when the red light on the remote turns on, release both
buttons).
Note.. Automatic

Component

Code Search
you want the remote to operate

(VCR, HD

Code Search can't be used with the A UX button.

Press PLAY (the red light on the remote starts flashing).
The remote is searching the first set of component codes (there are
several sets of codes). If the component you want to operate doesn't
turn off automatically after 5 seconds, press PLAY again (the red light
starts flashing again as the remote searches through the next set of
codes).

Buttons

Theseare the buttons you program to operateanother
component.

Continue

pressing

PLAY until the component

turns off.

NOTE: If the component doesn't turn off after you 're pressed the PLAY
button 20 times, the component can't be programmed.
4,

Press REVERSE and wait 2 seconds.
component turns back on.

Repeat this step until the

To finish, press and hold the STOP button until the red light on the
remote turns off.

Chapter

Connections

and

Setup

Using Direct Entry
1.

Turn on the component

you want the remote to operate (the red light on the remote turns

on).

Look up the brand and code number(s)
pages.

for the component

on the code list on the following

Press and hold the component button that corresponds
to operate (VCR, RCA DVD, etc.).

Enter the code from the code list. When you begin entering numbers, the red light on the
remote rams ofT. When the last number is entered, the red light turns back on. If the incorrect
code is entered, the red light will flash.

Release the component

Press ON-OFF to see if the component responds to the remote commands.
pressing the component button and then ON-OFF again.

If you get no response, repeat these steps using the next code listed for your brand, until the
component responds to the remote commands.

to the component

you want the remote

button. The red light on the remote turns off.
If it doesn't,

How To Use the Remote Control After You've Programmed
Once the remote control has been programmed
other components.

successfully,

try

you're ready to use it to operate

Press one of the video source buttons to select a component

Press the component button (MONITOR, VCR, DVD, AUX, or HD RCVR) to use the Transport
buttons (REVERSE, PLAY, FORWARD, STOP, PAUSE, and RECORD) to operate the component.

Press ON-OFF

to turn the component

(VIDEO or RGB) to operate.

on or off.

NOTE: If you keep pressing buttons and nothing happens, you may have the wrong video
source or wrong component selected. You must select the correct video source and the
component button that matches the component you want to operate.

Chapter

Connections

and

Programmable
VCR

Setup

Codes for the Remote Control

(VCR1, VCR2 or AUX button)

Akai 2003, 2004, 2005. 2007, 2008, 2111, 2112,
2113

Magnavox
.......... 2021,2022,2062,
2063, 2104,
2108,2124
Magnin ........................................................
2013
Marantz...,2009,
2010,2011.2016,2018,
2021,
2058, 2062,2064
Mama ...........................................................
2014
Masushita ....................................................
2021
MEI ...............................................................
2021

American High ............................................
Asha .............................................................

2021
2013

Memorex ............ 2002.2011,
2023,2026,2104,2131

Audio Dynamics ................................
2009.
Audiovox .....................................................
Bell & Howell ..............................................
8eaumark ....................................................

2010
2014
2011
2013

MGA ........................................
2029, 2065,
MGNTechnology
........................................
Midland .......................................................
Minolta ....................................
2055, 2056,

Admiral ......................................................
Adventura
...................................................

2131
2026

Aiko .............................................................
2027
Aiwa ..................................................
2002,2026

2013.2014,

2021,
2113
2013
2053
2107

Sylvania ....2002, 2021, 2022, 2026, 2062,2063.
2065,2124
Symphonic .........................................
2002, 2026
Tandy .................................................
2002, 2011
Tashiko ........................................................
2014
Tatung ...............................................
2058,2111
TEAC .................... 2002,2026,2058,2085,2111
Technics .............................................
2021, 2109
Teknika ......2002, 2014, 2021, 2028. 2100, 2129
TMK .........................................
2013, 2024. 2047
Toshiba2015.2049,2051,2055,2065,2093,2116
ToteVision ..........................................
2013,
Unitech ........................................................
Vector Research ............ 2009. 2010.2015,
Victor ...........................................................

2014
2013
2016
2010

Video Concepts,..2009,201_
2015.2016,
Videosonic ...................................................

2113
2013

Broksonic ...........................................
2012, 2025
Calix .............................................................
2014
Candle2013, 2014, 2015,2016, 2017, 2018, 2019

Mitsubishi ........... 2029.2055, 2056.2065,
2067,2069,2070,2071,2072,2073.2074,2106,
2113,2123

Canon

Montgornery
Ward ........................... 2075, 2131
Motorola
...........................................
2021,2131
MTC .........................................
2002,2013.2026
Multitech ...2002,
2013, 2016, 2026. 2053, 2061
NEC ........... 2009,2010,2011,2016,2018,2058,
2064,2076,2078,2079,2111,2123
Nikko ...........................................................
2014
Noblex .........................................................
2013

Wards ....... 2002. 2013, 2014, 2015, 2021, 2023,
2026, 2029,2055, 2056, 2061, 2096, 2101, 2102,
2103, 2107.2116, 2131
XR-IO00 ...................................
2021, 2026, 2061
Yamaha .....2009,2010,2011,2018,2058,2111
Zenith .................. 2004, 2098, 2104. 2119, 2128

Olympus

Cable Box

......................................

2021.2022,2114

Capeha_ ............................................
2020,2110
Carver ..........................................................
2062
CCE.....................................................
2027,2061
Citizen ...-2013, 2014, 2015. 2016,2017,
2019.2027
Colo_yme ....................................................
Colt ..............................................................

2018,
2009
2061

Craig .............................. 2013,2014. 2023, 2061
Cu_isMathes2000,
2002, 2009, 2013, 2016, 2018,
2021,2022,2024,2115
Cybernex .....................................................
Daewoo2015,2017,2019,2025.2026,2027,2028,
2110

2013

Daytron .......................................................
2110
Dbx ....................................................
2009,2010
Dimensla ......................................................
2000
Dynatech ...........................................
Electrohome ......................................

2002, 2026
2014, 2029

Electrophonic
..............................................
2014
Emerson2002. 2012,2014, 2015, 2021, 2024, 2025,
2026, 2029,2030, 2032, 2033, 2034, 2035, 2036.
2037, 2038.2039, 2040, 2041,2042, 2044, 2045,
2047, 2065,2105, 2113, 2116.2117, 2130
Fisher ........ 2011, 2023, 2048. 2049, 2050, 2051,
2052,2116
Fuji ....................................................
2021, 2119
Funai ..................................................
2002,2026
Garrard ........................................................
2026
GE2000,2001,2013,2021,2022,2053,2115,2120
Goldstar ............... 2009, 2014,2018, 2054, 2121
Gradiente
...................................................
2Q26
Harley Davidson ..........................................
Harman Kardon ..........................................
Harwood ...................................................

2026
2009
2061

Headqua_er ................................................
2011
Hitachi......2002,20S5,
2056, 2057, 2107,2111,
2120,2122
HI-Q ...........................................................
2023
InstantReplay
............................................
2021
JCL ............................................................
2021
JCPenney 2009.2010, 2011, 2013,2014,
2021,
2022, 2055, 2056, 2058, 2059, 2060, 2107, 2118
Jensen ....................................
2055, 2056,2111
JVC ..2009,2010,2011,2018,2058,2111,2123
Kenwood ............ 2009,2010,2011,2016,2018,
2058, 2111,2123
KLH ........................................................
2061
Kodak .........................................
Lloyd ...............................................
Logik ......................................................
LX_ .......................................................

2014, 2021
2002, 2026
2061
2014

2066,

......................................................

2021

(AUX or HD RCVR button)

Optimus .............................................
2014, 2131
Optonica ......................................................
2096
Orion ...........................................................
2035

ABC..5002.5003,
S004,5005,5006,
Antronix
............................................

Panasonic .. 2021, 2022. 2109, 2125, 2126, 2127
Pentax .................. 2016,2055. 2056.2107,2120
Pentex Research ..........................................
2018

Archer ............................ 5008, 5009, 5010, 5011
Cabletenna ..................................................
5008
Cableview ....................................................
5008

Philco .............................
2021, 2022. 2062,
Philips ............................ 2021, 2062. 2096,
Pilot .............................................................
Pioneer ................ 2010,2055, 2080. 2081,

Century ........................................................
Citizen .........................................................

2063
2124
2014
2123

Po_land ......................... 2016, 2017, 2019. 2110
PROSCAN ...........................................
2000,2001
Protec ..........................................................
2061
Pulsar ...........................................................
2104
Qua_er ........................................................
Qua_z .........................................................
Quasar .....................................
2021, 2022,
RCA 2000,2001.2003,2013,2021,2055,
2082,2083,2084,2085,2086,2087,2088,2089,
2090, 2091, 2107, 2115.2120.2125
Radio Shack/Realistic...2002,2011,2013,
2021,2022,2023,2026,2029,2049,2050,2096,
2131
Radix
............................................................

Randex .........................................................
Ricoh ............................................................
Runco .......................................................

2011
2011
2125
2056,

S007,5053
5008.5009

Colour Voice ......................................
5012. 5013
Comtronics ........................................
5014, 5015
Contec .........................................................
5016
Eastern .........................................................
Garrard ........................................................
GC Electronics .............................................

Jerrold ....... 5003, 5005, 5007,5018,
5046,5053

Magnavox
...................................................
Memorex .....................................................

2014
2128
2104

Movie Time ..............................
NSC ........................................
Oak ..........................................

Sanyo ......................................
2011, 2013, 2023
Scott 2012, 2015, 2025, 2032. 2035, 2038, 2065,
2093,2116
Sears2011, 2014, 2021,2023, 2048, 2049. 2050,
2051, 2055, 2056, 2107,2118
Sharp 2002, 2017, 2029, 2094, 2095, 2096, 2131
Shintom ......................... 2004, 2056, 2061, 2098
Shogun ........................................................
2013
Signature ..........................................
2002,2131
Singer ......................................
2021,2061,2128
Sony ........... 2002, 2004, 2098,2099,2119,2128
ST5 .................................................
2021,2107

5002
5011

5023, 5024,

2014

5amsung ..2005,2013,2015,2033,2053,2112
Sanky .................................................
2131, 2104
Sansui ............................ 2010, 2092, 2111, 2123

5017
5011
5009

Gemini .....................................
5018,5019,5049
Generallnstrument
....................................
5003
Hamlin ................. 5020,5021,5022,5035,5045
Hitachi .........................................................
5003
Hytex ..........................................................
Jasco ............................................................

2014

5011
5011

5025
5026

5002, 5027. 5028
5002,5027, 5028
5oo2,5016, 5029

Panasonic .........................................
5048,
Paragon .......................................................
Philips......S011,
5012, 5013, 5019, 5025,
5031,5032
Pioneer ..............................................
5033.
Pulsar ..........................................................
RCA .........................................
5047, 5049.
Realistic ..........................................
5009,

5052
5026
5030,

Regal ...............................................
S022,
Regency .....................................................
Rembrandt
................................................
Runco ......................................................

5035
5017
5003
5026

5034
5026
5052
5049

Samsung ......................................
5014.5034
Scientific Atlanta .......
5006, 5036, 5037. 5038
Signal

..................................

5014, 5016

Chapter

Connections

Signature .....................................................
SLMarx ........................................................

Sprucer ........................................................
5052
Starcom ...................................
5007,5018,5053
5targate .............................................
5014,
Starquest .....................................................
Tandy ...........................................................
Teleview ......................................................

5018
5018
5040
5014

Tocom ......................................
5004, 5023,
Toshiba ........................................................
Tusa ..............................................................
TV86 .............................................................

5041
5026
5018
5027

Unika .......................................
5008, 5009,5011
United A_ists ..............................................
5002
United Cable ...............................................
5053
Universal ........................

5008,5009,5010,5011

Vldeoway ....................................................
5044
Viewstar ........................ 5015,5025,5027,
5040
Zenith ......................................
5026, 5050, 5051

Chapter

Satellite

5003
5014

and

Setup

Receiver

Audio

(HD RCVRor AUX button)
Chapparal ..........................................
5056, 5057
Drake .................................................
5058, 5059
GE ......................................................
5000,5001
Generalln_uments
................ 5060, 5061, 5062
Panasonic ....................................................
5075
Prirnestar .....................................................
5076

(AUX button

only)

(For RCA and Dimensia brands only)
AM/FM .........................................................
Aux ..............................................................
Phono ..........................................................
CD ................................................................

4003
4004
4005
4007

Tape .............................................................

4006

PROSCAN ...........................................
5000,5001
RCA ....................................................
5000,5001
Realistic .......................................................
5063
Sony .............................................................
STSI .............................................................

5072
5064

STS2 .............................................................
STS3 .............................................................
STS4 .............................................................
Toshiba ........................................................
Toshiba ........................................................

5065
5066
5067
5068
5073

Uniden

5069

.........................................................

This page intentionally

left blank.

HAPTER

The Menu System
Chapter
•

Overview:

Basic Operations

• The Picture Quality
• The Audio

• The Screen Menu
• The Function
• The Options

Menu
Menu

• The Setup Menu
• The Auto

Tuning Menu

• The Sleep Timer

The

System

Basic Operations
Power
To turn the monitor on and off:
1.

Plug the power cord into an active AC power outlet.
Press the ON-OFF button on the remote control or the monitor button on the unit. The
monitor's POWER/STANDBY indicator turns green when the monitor is on.
Press the ON-OFF

I,utton on the remote control or the unit to turn it off. The monitor's

POWER!STANDBY indicator turns red and the standby mode
unit with the remote control).

is set (only when turning off the

Volume
To adjust the volume:
1.

Press and hold the VOL > button (on the remote
level.

control or the unit) to increase to the desired

Press and hold the VOL < button (on the remote
desired level.

control or the unit) to decrease

to the

Note: External speakers are required for sound.

Mute
Press the MUTE button on the remote control to reduce

the sound to an inaudible

level. Press

MUTE again to restore the sound.

Navigating
GUIDE

INFO

You

can

access

adjust
the

the Menus
monitor

main

meI_tl,

options
press

tl',rough
the

the

ivIENU

monitor's

button

on the

remote

control

There

are a few things

you

need

to know

to navigate

through

the menu

system. The navigation
buttons
are the set of arrov¢-shaped
the middle of the remote (See illustration
on left).

buttons

CLEAR

These are the buttons on the remote
you use to navigate through the
monitor's on-screen menu system.

I rse the
and

•

and

•

buttons

()i_ the

remote

to move

the

highlight

down.

Use the _

and

•

buttons

to nlove

Press lhe GO BACK button
YOLI

MENU,,OK on the front of tl_e monitor.
"_ZOOM"

systeln.

can return

the

luonitor

on the remote
to the

the RESET option

in the |:UNCTION

reset.

will return

AI.L settings

the highlight

facials.'

menu.

to the factory

and change

to return
settings

settings.

to a previous
al

any

Rememl_er,

lnentL

time by using
it you

choose

Chapter

settings.

The

System

The Multi-Screen Feature
The Muhi-Screen
same time.

feature is used to show either a single picture or two pictures on the screen at the

SINGLE - Displays a single picture on the screen.
SIDE BY SIDE - Displays two pictures from different

input signals side-by-side.

PICTURE IN PICTURE - Displays two pictures from different
one appears in a window on top of the other picture.
To use the Multi-Screen

input signals; one fills the screen and

feature:

Press the WHOoMULTI button on the remote to select a mode.

If side-by-side mode or picture-in-picture
mode has been selected, use the left/right arrow
buttons to position the subscreen as shown below.

Picture-in-Picture

Side-By-Side
qm

Side-by-side 1:
VIDE01 is the

[viDEo2]

active picture.

[V,DE02]

main screen

Side-by-side 2:
VIDEO1 is the

I VIDEO2 I

active picture.

[VIDEO2 ]

Picture-in-picture
(window on the left):
VIDEO1 is the active
picture.

Picture-in-picture
(window on the right):
VIDEO1 is the active
picture.

main screen

subscreen

m
,

The active picture (indicated in the ahove illustrations by the double box) is the picture that is
affected he remote actions and menu selections. To switch the active picture, press the OK
button. Press the OK button again to change back to the other picture.
Note: Changing the active picture doesn't change the size or location of the pictures.

Chapter

The

System

Selecting the Input Signals to be displayed
To change the input signals displayed

in muhiscreen

operations:

2.
IVIDEO21

Press the MULTI button to activate the Multiscreen
OK button to make the desired picture active.

function. Press the

Press the RGB, VIDEO or CMPNT button to change tire input signal.
The INPUT-GO BACK button on the front of the monitor can also
be used to change input selection.

[VIDE01]

The top screen shows VIDEO1 as the
active picture. The bottom screen shows
VIDEO2 as the active picture.

On-Screen

Menu Operation

To access the main menu, press the MENU button on the remote. The MAIN MENU is displayed on
the screen. The main menu contains a list of all the menus that control your monitor. To select a
menu, use the up/down arrow buttons on the remote to highlight the desired menu. When the
desired menu is highlighted, press the OK or MENU button to select.
Note: Different components use different types of input (RGB, video, etc). 5ome menu
options apply to only one type of input, so they only appear when they apply to the currently
active input. For example, the COLOR and TINT options in the PICTURE QUALITY menu only
appear when you are adjusting standard video input (VIDE01, VIDE02, VIDE03).

Chapter

The

The Picture
Setting

Quality

the Picture

Mode

System

Menu
with

the

PRESETS Option

Tile monitor has preset viewing modes that can be selected
environment. Each preset mode has the contrast, brightness
viewing

depending on your viewing
and sharpness adjusted for a specific

sitkl:.ttlon.

bIEMOP,Y

This mode alk)ws you to set and save your own picture adjustments.

SOI_ - Use this mode when watching your Monitor in a dark room. Soft mode provkles a
darker, finer picture, like the screen in movie theaters. These settings are preset for you and
can't be changed.
•

BRIGHT - Use this mode when watching your monitor in a I)right room. This mode provides a
picture with distinct differences hetween light and dark areas. These settings are preset for you
and can't be changecl.

•

NORMAL - The factory clefault.

To change the picture mode:

MAIN

AUDIO

From the main menu, select PICTURE QUALITY. The PICTURE
QUALITY Menu will appear.

Highlight the PRESETS option and press the • key on the remote to
select it. The PRESETS window appears.

Use the • button on the remote to select the desired mode. The
mode switches as follows when the • button is pressed:

SCREEN
FUNCTION
OPTIONS

SETUP
AUTOTUNINGSETUP

€ SEL

I_r_

r
i'd_

EXIT

MEMORY._-

SOFT _

Note: If you don't push the •
selection is set and the previous

BRIGHT

NORMAL_-j

button within 5 seconds, the current
screen reappears.

This is the main menu with the PICTURE
QUALITY option highlighted. Press OK to
bring up the highlighted menu.

Once you've selected
tile desired mode, press OK or MENU. Tile picture
[l!odc is no\v set :rod yot.i are returned
to tile PICTURE QUALITY screen.
If yon are using MEMORY mode, you can n/anually
adfust tile picture
settings (co[Itlasl. black level, and sharpness)
You can continue
adjusting
sellings ill I]/c PICI'ITRE QI ALITY menu, return to the main menu, or
c'xit

the

nlentl

system.

"1"oreturn to the main menu, press the GO BACK hutlon
To cxiI Ihc _ncnu s},slum, press CLEAIL

Chapter

on the rem<)te.

The

Adjusting
In MEMORY
CONTRAST

System

the Picture

Settings

lnod( _, _r()_ (.'all set and
- Changes

the picture's

BLACK LEVEL - Makes

the picture

SHARPNESS

the picture's

- Changes

COLOR - Changes
TINT - Changes

color

save the !_)llowing
contrast
lighter

(video

COLOR TEMP - Changes

the color

tone.

NOISE REDUCE

reduction)-

Only

the contrast

Once

you have

selected

Pi!

and

light and

dark).

mode,

only)•

only).

Removes

brightness

MEMORY

a(ljustments:

or darker.

input

- (noise

(between

picture

Mode

sharpness.

tint (video

NOTE:

picture

density

in MEMORY

extraneous

infk)rmation

can be adjusted
you

_ QUALITY

when

can adjust

from the signal

a computer

the picture

signal

settings.

to make

For example,

to highlight

to change

or •

•
•

to select it. The CONTRAST
to adjust the contrast.

button

clearer.

is used.

Use the •
button
buttons

the picture

the contrast

the CONTRAST
window

option.

appears.

setting:

Press

Use

•

tile
and

NOTE: If you don't push the _ or • button within 5 seconds, the
current setting is accepted and the previous screen reappears.

This is the PICTURE QUALITY menu with the
PRESETS option highlighted,

Once the contrast is adjusted, press OK or MENU. The contrast is set
and you are returned to the PICTURE QUALITY menu.

Use tile same procedure
settings.

When you are finished adjusting the picture settings, press GO BACK
to return to the main menu or press CLEAR to exit the menu system.

to adjust the black level and sharpness

If the "CONTROL NOT AVAILABLE"message appears when you are
trying to change the picture settings, make sure the preset mode is set to
MEMORY. You can only change picture settings in MEMORY mode. The
other modes are pre-set and can't be changed.

CONTRAST

__]0

This is the CONTRAST screen.

Chapter

The
Setting

System

the Color Temperature

The (+t)lor tcmpezatute

',,ettmg

',van m t [ecl) or +.o( )] (blue))()ur

+,_ontt()l', ho'v,

picture L%The COLOR TFMP option ha s,4 .,ettmg,-.
Normal

\Varm
Pro (lets vou sele+.t -,etttngs m+.hv]duall,, )
Cool
COLOR

TEMP.

:4 PRO •

This is the COLOR TEMP screen w)th PRO as
the current selection

For legulat x levi rag, Not m.t[, \\.trm or O )ol _s re+.()n>mended The PRO
setung is generally+ used onl}+ ior professional apphcauons
To <+hat'tgethe
COlOR TEblP setting
1

From the FL+LJm
menu, l'nghhght and select the PICTURE QUALITY
menLl

WHITE
GAIN

Use the arrow butt(ms o[1 the remote to hlghhgt'_t the COLOR TEMP
opuon Press the • button to seie+.t tt The COLOR TEblP -.creen
appears

BALANCE
.

iem
GREEN
BLUE
BIAS
RED
GREEN
BLUE

SEL.

0_10

: 7@_10

r+,+o,,.,,,
.-.

, o io
.. e lo

COLOR TEMP .,ettm R

.-+,o .-+oo,-q
/

- @ 1o

4)' ADJ.

Use the • and • bt]ttc)t't,_to -.elect the desned
The .,ettmg-; swttch +t'+iollov..,+,

NOTE: If you dot+'t push the • or • button _ ttb*n 5 seconds, the
current setting zs accepted and the pre_ *ous screen reappears
RETURN

This is the WHITE BALANCE screen with the
RED GAIN option h=ghhghted.

4 (.)nt_e the desue+.L<_ok)t te[l_p is '-,cle,_ted pres-, OK ot MENU If \'c,u
,+h¢)o'.e the PRO -,etttt'tg the \\ HITF BAL-\N(.F 'IC'ILRF menu
thL_ ii/t.,nu

netlll+Lg +, IL)[LII[]

[(1 [hL

IILLIII1 nle[1tl

"-+\'-.iLl/1

The

Reducing
Noise

is a term

clearness
reception

System

Noise in the Picture
I.ise(I to describe

extraneous

bits oi lnfortl;atlon

In the signal

that aff.e,t the

of the picture
You can use tile Notse Reduction
(NOISE REDUCE) setting
is poor or when playing video tapes that ha;e poor picture quaht'.,'

d your

The NOISE REDUCE option has four setting,,, including OFF The higher the setting, the stronger
the effect The settings switch as follows ',',hen tile • button is pressed

[-_ OFF _

LOW *-_ MEDIUM "--_ HIGH "-]

To change the noise redrlCtlOn setting
From the PICTURE QUALITY menu, hlghhght the NOISE REDUCE
option, and select tt by pressing the • button The NOISE REDUCE
SCREEN _s dlsplaved
2

Use the • and • button.s to select the desired noise reducuon
_ettmg
NOTE: lf you don t push the • or • button within 5 seconda, the
clLrrent settlHg IS clcc_'pted and the prez lous sct ee_t l eappears

3
This is the PICTURE QUALITY menu with the
NOISE REDUCE (noise reduction) option
highlighted.

When the desired setting _s dtspla',ed press OK to return to the
PICTURE QUALITY meilu You can continue adlustmg picture
_ettmgb. rettnn 1o tile main menu, or press CLEAR to exit the menu
'_Y._tel/i

NOISE

REDUCE

:4HIGH

This is the NOISE REDUCE (noise reduction)
screen.

Chapter

The

System

The Audio Menu
The AUDIO menu allows you to adlu_,t the treble, bass and left, nght balance
.,,peakm •
BASS - Change.', the level of low frequency
TREBLE - Changes

sound

the le',el of high frequency

BAL_.NCE - Changes

of ,,our external

sound

the balance of the left and nght speakers

Menu Operations
To access the AUDIO menu

From the mare menu, h_ghhght and select the AUDIO optzon
AUDIO menu ts displayed

Use the • and • arrow huttons on the remote to hzghhght an option
( tot example, BASS)

Use the • and I>"buttons to adlust to the des*red

-t

Yon can continue adlustmg audio settings, press GO BACK to return
to the mare menu, or press CLEAR to exit the menu system

The

semng

SEL
This is the AUDIO menu with the BASS option
highlighted. Press the right arrow button to
select it.

Chapter

The

System

The Screen Menu
The
the

SCREI-N
correct

positions

allows

you

to set

th_

viewing a particular
of on-screen 111enLIs.
nlode

for

monitor
nlovit:

to aUtolnatically
to change

and

select
tht,

Selecting

a Viewing

When

with

viewing

Size

a cnnlponent

o/b_,r

tb_l/l.yollrHD/-t,

ceit%>r* you

can

set the screen nlode to one of |()LIr screen sizes to suit the type of input
you are watching. Select the screen mode with the CINEMA button on
the renlote control. The screen sizes are as Ik)llows:
FILLexpands in both vertical and horizontal directions while the correct
propol_ions are maintained. The picture is not distorted, just closer.
Fill

NORMAl displays a picture with a 4:3 aspect ratio (standard video).
Because this mode fills the screen vertically, but not horizontally, black
hars will appear on the right and left sides of the picture.
Note: If viewing with a 4:3 aspect ratio for Iong periods of time,
set side gray level at 3 or 4.
FUEt expands the picture in the horizontal direction only. This option
corrects the aspect ratio of images that have been compressed or
horizontally "'squeezed."
Normal

STADIUM expands in both the horizontal and vertical directions, but
varies the amount of stretch depending on the picture - the center of the
picture is almost normal while the edges are considerably expanded.
This mode is intended fk>rwatching video with a i:3 aspect ratio on a
wide screen.
Note: In Stadium mode, only the V-position and H-position
displayed. You can't change the height and width.

are

To change tile viewing size:
1
Full

Press

the CINEMA

button

on the remote

control.

The c'cuteilt viev, ing size ,.,,ill bc di_,pla}ed. Press the CINEMA hutton
:tgain to sv,itcl_ to tile, l]ex[
size
]'ILL
> Size
sx,,itches
+is
loll<>\vs:

FILL _

NORMAL

Note W/Je v e
g t, th c HD
_e/e_dous to set t/_e proper trzrio

FULL _

STADIUM

tlet,er, use t/_e rel¢il,er} _ ee ./!)rm, t

Stadium

Chapter

The

Adjusting
The

S('REEN

the
mcnu

Picture
lets you

Position

adjust

System

and Size

th_ + position

and

_izc

ot the picture

Tile first two options,
V POSITION and tt-POSI'I'ION,
adiust the placclnent
of the pRtule on the
screen. For example,
if the picture is too far to the left, you can use the tI POSITION to tt]{}x't+ it to
the right. To adjust the position
of the picture on the screen:

SCREEN

From

NNORMALk

@ 10

V-POSITION
H-POSITION

@=3 ]Mm=lO
@:==3=mm!O

V-HEIGHT
H-WIDTH

tile

iTlain

menu,

highlight

and

select

tire SCI'_EEN

option.

Tile

SCREEN menu is displayed.
2.

Use the • and • butt,:)ns to select tile mode you want to change

When the desired mode is highlighted, press tile • button. The
sdected mode screen ,,,,'illbe displayed.
Use the arrow buttons to adjust the position of tile picture.
NOTE:
current

SEL

4F ADJ.

RETURN

The SCREEN menu with the MODE option
highlighted,

push

If you don't
setting

When

is accepted

you've

the an arrow
and

adjusted

button

the previous

to tile

desired

within

screen

setting,

seconds,

the

reappears.

press

tile

BACK

button on the remote to return to the SCREEN memt.
The V-HEIGHT and H-WIDTH options expand and contract tile size of
tile picture to fill the screen. For example, if the picture is slightly wider
than the screen, you can use the H WIDTH option to shrink the picture
horizontally
Note: These options are not available

in STADIUM mode.

To adjust tile screen size:
SCREEN

Select the desired option from tire screen menu and press the •
Imtt()n. The selected mode wit'_clow will be displayed.

tJse the

:dFULL).

@ JO
@ =g::z:+mmmml©

V-POSITION
H-POSITION
V-HEIGHT

@ _"PmJ_+I

H-WIDTH
AUTO PICTURE
FINE

NOTE:

[/)'olt

Cll/'rcql/

seltiu£

When
[etuin

PICTURE

PICTURE
€ SEL.

: OFF

arrow buttons
don't

cln (llron'
and

hutlou

tPithi/l

!l_(,prclious

5 S(?COlldS.

scrve/t

l]?g

reappea*_

t() tile desired setting, press OK t() select and

SCREEN

ADJ.
4!_ ADJ.

RETURN

The AUTO PICTURE option only appears if you
have a computer connected,

Auto

Picture

'[hc At'l{)
hdkL'

PIC[ fiRE funcli{>n

_1 COI11ptlR!l

('()nlR'LIL'C_
_dittsb

II/l_t!_C

10 aditlS[

1[ %(}kl \\;LI)[

So, loot
•

the

btltl{}l]

tumed{>lt,
clisplayc'd
2

Sc{ctt

AI rTO

:lppc:tl',

ill tIR'

IO IHL + I)_t)!/it{)l

{)11, tl ;ltlt(>lnatR:l]ly

l]Rl\clilig

PICFUI'_E

alld

SC[{EI

the

I:lXl"

bencalh

an {}pll(}t/

N iIk=ntl

\_ IP21/ Ibis
silipcd

(}l/IV

R'a{tlrL

p:tttcu>

lI1:1

il x{Ytl

+ i_ tLIII]L'LI
c{>illputer

[[R'_,L + I/l_{l/kl_{ll\

(}piton

It@in the

SCi,_EEN

t(> ttulI/ :X[ "1'0 ]}[CI L'I{E _>11 \\'lien

\\ill he clispla,,ed
Pic'ss {)K It) icltili]

Chapter6

pnsD

i,_ ¢ICC_)te(I

aditlsted

yotfve
1o the

to adjust tile size of the picture.

PI(]IITRE

:lnd

PICI'[

:\(;'10

Rt" AI).l

nlcnu.

I'icss

the

I}ICTLTRI( Is
options

clio"

it
;lilt{

plL'S5

tilL'

•

/so" the • and
1o Ihc S(]I{I{E\

I}tl[t{)II

•

]hc

I}tltl<)l]s
ii/Clltl

street1
It) :{elitist

Iol that
that

{)pti{)n

{)plion

The

System

The Function
Ihe

FI]N(]TI()N

system)

and

menu
how

c(mtams

the

pictu(c

options

lhat

to]H[()l

:4ON,

MENU ADJUST

: 1

POWER

: OFF

SAVER

GRAY LEVEL

: 3

FILM MODE

: ON

RGB3 ADJ.

On-scrc_:n
give

Ih:m

the

switch

than

about
inputs

) is displayed

tile
on

the

:in option
currently

the

From the main menu, highlight
and
The FUNCTION
menu is displayed.

tlighlight
on-screen

3
: ot_

POWER

UST:

Olaf

GRAY LEVEL

FILM MODE

RGB3 ADJ.

Adjusting

the

RETURN

\
/
\

/
\

................

the

Use the •

option.

b'0tton

to toggle

off does not affec! on-screen

the Position

of the Menu Display

position of the

on-screen

lltellUS:

l lighlight and select the MFNU AI)JUST option. Use the • button (o
Scloll through
the n'_enu l)ositi(ms As you press the • I)utton, the
menu _\ilt _u_\e tuotu_,.I to Ihe dit{k:rcnt p<)sitiol'_s

When

" 3

5
,,

the FUNCTION

off:

From the mare ntenu, highlight and select the FUNCTION option.
Tile FUNC'I'ION menu is displayed.

\(Itl

i_lc_,s (;1)
[ht'

. .............

example,

/
\

•

select

(lor

displays

right.

To atl}tlSt
_1_ADJ,

n:.uue

_t)

example,

The on-screen menus can de displayed in diff'eren_ positions on the
screen. There are a total of nine possible positions shown in the grid on

SAVER

input

turn on-screen

and select the DISPLAY option.
disp]tlys on or off.

by de,huh
For

You can contin0e setting options in the FUNCTION menu, press GO
BACK to return to the main menu. (>rpress CLEAR to exit the menu
system.

RESET
# SEL

appea_

selected.

:42,

SAVER

SCREEN

systmn)
have

RETURN

FUNCTION

O)SPLAYI

you

selected

screen.

Nole: Turning the DISPLAY option
menus. Menus can't be turned off,

;M,EN_LI

SAVER

4_ ADJ.

(di{ferent

intorlnation

you

CMPNTI

Displays

dispkws

you

When

RESET
SEL.

(o[hel

displays

On-Screen

FUNCTION

SCREEN

Oll-S_IVL'n

is displayed¸

hiD. e tl_., ltlCI1ll

B.\(IK

h_ ictu_n

ill the

desired

t_ tile' ill,till

l)()siti_)n

n_nu,

)ou

ol prc>s

can

prt*ss

(:LEAR

Its<,

t<> t'xit

ii]L,l_tl _%_l_,tl]

6
t

- ................

8)9

The number
2 position
will display
on-screen
menus in the top center
of your screen.

Chapter

The

FUNCTION
DISPLAY

: ON

MENU ADJUST

Setting

;go'Wt_g'_X_Lql:4ON•
: 3

FILM MODE

: ON

RGB3 ADJ.

: 1

SCREEN

This

SAVER for Computer

Images

atitomatica]ly

l+Mdl.l_._s

the'

monitor's

pox_er

tk)r a certain anlount

c()tl_tlmpti(>[1

of time. POWER SAVER

If tile computer's
power isn't turned on or if the comptlter
and selector
tuner are not properly
connected,
POWE.R SAVER is set to OFF.

SAVER

4• ADJ.

ftlilCtioi_

no operation is performed
can be turned on o1 <)if.

RESET
SEL

POWER

System

Ill,_" P()x.X;ER&,\VER function can be ns_.:d when th,::signal _,our_c to the
monitor comus from a computer
confolnling to I]lU VE_A I)]>MS [orln;i[

GRAY LEVEL

the

['ffiI_W_RETURN

This is the FUNCTION menu with
SAVER option highlighted,

the POWER

For

instnlctions

see

your

"Eo turn

using

computer's

tile

the

colnpnter's

operating

monitor's

power

nlanagement

fllnCtio[i,

manual.

POWER

SAVER

function

or off:

From the main mentl, highlight and select FUNCTION. The
FUNCTION menu is displayed.

flighlight

Use the I_ button to toggle the setting ON or OFF.

Yotl can continue making adjustments in the FUNCTION menu,
return to the previous menu by pressing the GO BACK button or
press CLEAR to exit the menu system.

the POWER SAVER option.

The POWER, STANDBY indicator shows the statl.is of the PO\VER SAVER
function. Sec below fk)r status and description.

POWER/STANDBY indicator

POWER
SAVER
Mode

POWER,
S'IANDBY
indicator

Gret'il

Pox_

Saver

Operating

l)escription

Status

Not activatc]d

Horizontal

Turning the Picture Back On
Picture aheadv on

and \ertica]

synchronizing signals :ire
prcserlt

:\c Ii_ :iicct

5t:ulclbv

I>cd

stl_pcl/d

\c lit :tic'el

Nt)

fri)lll

[hu

hoHzotlhll

>l_ll_tlS

:IFC

c.t Illlpt

IIUI"

COl/lptlfef

I ',c the kc}boctld ol nlousc

s}ilchrt)[/izillg
t)IttSt'l/[

lhc piCtUlC rc:lplbcais iunnudi:tlcl).

11"O111 !lit'

No _ crlk ;il s} [/chn)nizin_d >lgl/:llS

I >c tilt'

;tic

plClUlC

plCSClll

l/(l!ll

{hc

( Oll/l)Ult

lh:lll

Oil

Red

\tti_

:ilccl

\t!
>}lit

lit)liZOlll:il
hlolii/ii/_a

[1{)ii1 Iht'

:lI/d

_ t'llic:ll

-ign;ils

cclllll3tl(t'I

ale

!'_t

file

Ill

Iv>_li_[_c>:ilS i_ul

\\ht'n

ill

kt'\lxl;tltt

>Ltndl_\

Illtltlst'
lll_)['t'

Ihc
_l_l\"

ll!_lc

*111Illl>tl>c'

"t hc

{xc.cnl
Ill:in

tXllc'l/

-tl_pCllcl

Chapter

kcdx>:nd

in c'ili/c'l ¸ _l:uldb\

t_f

1/1( )dr'

The

System

FUNCTION

Setting the Gray Level for the Sides of the Screen

DISPLAY

: ON

The

MENU ADJUST

: 1

POWER

: OFF

Ihe screen where nothing is displayed (on Ih(" h'h and righl sides of tilt"
screen when it is set to 4:3 size). The ]excl can lie adjusted from 0 to 1"3.
Tim factoi T setting is 3 (clark gray).

SAVER

FILM MODE

:ON

RGB ADJ.

4k ADJ.

RETURN

LEVEL option highlighted,

NOTE: Repeated watching with the
gray level set to black may effect the

alh)',vs

_r()_ t( ) S_'[ the

gray

level

for the >,ides {if

From tile main menu, highlight and select FUNCTION. The
FUNCTION menu is displayed.

l lighlight the GP,AY LEVEL option.

Use the • button to scroll through

,t.

When tile desired gray level is highlighted, i)ress the • button to
return to tile FUNCTION menu r)ptions You can continue making
a(ljustments within the FUNCTION menu, press GO BACK to ]cturn to
the previous menu or press CLEAR to exit tile nlgnLi system.

quality of your picture. To reduce the
effects of uneven phosphor aging, set
the gray level to 3 or 4.
with

lunction

To adjust file gray level for tile sides of tile screen:

This is the FUNCTION menu with the GRAY

If viewing

LIqVI'I.

/VOTE: Repeated watching with the gray level set to black may effect
the quality of your picture. To reduce the effects of uneven phosphor
aging, set the gray level to 3 or 4.

SCREEN SAVER
RESET
SEL.

GRAY

a 4:3 aspect

for long periods
of time,
gray level at 3 or 4.

set

ratio
side

Adjusting

for Flickering

with

is some
anlotlFlt
of flickering
trans[_erred from film to video
There

ON All images are displayed

the levels.

that

Film Mode

OCC'LIFS if] :In

ill]age

v/heFt

it is

in film mode

OFF FHm mocle is off.
To turn FILM MODE ON:
FUNCTION

DISPLAY

From the main menu, highlight and select FUNCTION. The
FUNCTION menu is displayed.

Highlight tile FILNI MODE option

Use tile •
displa3 ed

: ON

MENU ADJUST : 1
POWERSAVER : OFF
GRAYLEVEL
: 3
:4ONi_
RGB3ADJ.
: 1
SCREEN SAVER
RESET

Press

41_ADJ.

•

c_ua c{}ntmue
t(} the
the

€ SEL.

tile

button

to scroll

I+uth}n

I{} tt'tUltl

nlaking

l'>re_ i(}cis niL'nil

inc, nu

through

:tcIiuslnR,
by

t{> the'

tile" thlee

FI+NCIION

n(s \', ithin

ple>sillg

G()

moclcs

until ON is

(}ph(ms

tilt., F[ N{.7I'ION
I}ACK

{}i press

You

menu.

CI.t{AR

R, turn
[{} exit

system

RETURN

This is the FUNCTION menu with the FILM
MODE option highlighted.

Chapter

The

FUNCTION

Adjusting

DISPLAY

: ON

MENU ADJUST

: 1

POWER

: OFF

SAVER

GRAY LEVEL

[l the picture

From

is not

the + tll_iin

: : ON
:411_

sCREEN

the Monitor
stable

it+ I/(;B3

mt, ntl,

highlight

System

in RGB3 Input

Mode

inoclc.,

AI)IUST

use tilt'

R(;I+]

ftJantrt +

to acljust it.

: 3

FILM MODE

select OPTIONS+ The OPTIONS

and

is displayed.

Highlight tile RGB3 ADJUST option.

Use the • bum)n to select tile desired
choices scroll as follows:

SAVER

RESET
SEL

tilt. >

:lnd

iS displayed

Ceil] contillue

noliital

I'<>set the' PI.E Ic_cl t<) I.OCF.:
1

Chapter

the PLE option to LOCK dims tilL'
titan

making
prcvi(_ns

ictnl0

adjustnlcnts
InL'Iltl

the

FI:Nt]TI()IN

x\ithm

the

pi'c'ss MEN(

illeiltl

optiolls

F/:NOTION

or CI.EAR

"lou

mc't]tl.
to

CXil

Iltc"

5\ Slel//

The

System

SCREEN SAVER
PLE

INVERSE

SEL.

Turning ORBITER on

: AUTO

The factory setting for ORBITER is OFF. To turn ORBITER ON:

:4ONk

From the main menu, highlight and select FUNCTION. The
FUNCTION menu is displayed.

Highlight the SCREEN SAVER option (the SCREEN SAVER menu is
displayed).

Highlight the ORBITER option.

Use the • button to select ON.

Press the • button to return to the FUNCTION menu options. You
can continue making adjustments within the FUNCTION menu,
return to the previous menu or press MENU or CLEAR to exit the
menu system.

OFF

-4> ADJ.

r_l_FJ RETURN

This is the SCREEN SAVER menu with the
ORBITER option highlighted.

Setting

the INVERSE

hNVERSE has three options:
ON - The picture is ahematively
image.

displayed

as a positive and negative

OFF - INWERSE is off.
WHITE - The screen turns white.
The factory setting is OFF. To change

the INVERSE mode:

From the main menu, highlight and select FUNCTION. The
FUNCTION menu is displayed.

Highlight and select the SCREEN SAVER option.

3. Highlight the INVERSE option.

Use the • button to select your choice.

Press the • button to return to the FUNCTION menu options. You
can continue making adiustments within the FUNCTION menu,
return to the previous menu or press MENU or CLEAR to exit the
menu system.

Chapter

The

RESET

RETURN

Resetting to Default

System

Values

The RESET functkm allows you to reset_ adiustmems to th_ factory
default settings. Caution:
this will reset all adjustments
you have
made

in all menus,

To reset

to the factory

including
dethult

autotuning

configuration

settings.

settings:

From the main menu, highlight
FUNCTION
menu is displayed.

Highlight

The RESET screen

[Jse the • or • button to highlight
the RESET option and press OK
or MENU. The RESET screen will display the message
NOW
RESETTING. When the settings are restored
to the factory default
you are returned
to the RESET screen.

the RESET function

and

select

and press

EUNCTION.

The

OK.

is displayed.

When you are done, press GO BACK to return
or pres CLEAR to exit the menu system.

to the FUNCTION

These are the RESET screens. Choose the
RESEToption if you want to reset ALL
options in a_ menus back to the factory
default.

Chapter

The

System

The Options menu
Setting the Audio Inputs
The monitor's audio sources are programmable
to the each of the monitor's video sources.
example, you can program AUDIO1 source to work with the RGB2 video source.
This feature

is generally used only for commercial

applications.

From the main menu, highlight and select OPTIONS. The OPTIONS
menu is displayed.

Highlight the one of the audio input options.

Use the • button to scroll through
modes scroll as follows:

FVIDEO1

This is the OPTIONS menu with the AUDIO/
input option highlighted.

For

_VIDEO2

VIDEO3

the available video sources. The

CMPNT1

RGB1 _

ROB2 _

RGB3

When the desired mode is selected, press the • button to return to
the OPTIONS menu items. You can continue making adjustments
within the OPTION menu, press GO BACK to return to the previous
menu or press MENU or CLEAR to exit the menu system.

The factory defaults are as [bllows:
• AUDIO1 - VIDEO1
• AUDIO 2- CMPNT1
• AUDIO3-

RGB1

If you use the reset option in the FUNCTION menu,
return to the factory default settings listed above.

Setting

HD SELECT
PICTURE SIZE
# SEL

RETURN

This is the OPTIONS menu with the BNC
SELECT option highlighted.

will

the BNC Connectors

If tile component you are connecting to the monitor doesn't have
composite video jacks, you can set the BNC inputs to act as component
video inputs.

: 1080A
: ON

_1_ADJ.

the settings

From the main menu. highlight and select OPTIONS. The OPTIONS
menu is displayed.

Highlight the BNC SELECT option.

Use the • button to toggle between
CMPNT2. (component).

Once you've selected the desired setting, press the • button to
return to the OPTIONS menu items or press CLEAR to return to the
main menu.

RGB2 (composite)

and

Chapter

The

Setting a Computer
Select Mode
Tile RGB SELECT function
ik)r the type of con_puter

Image
alk)ws

image

to the Correct

you to select

the correct

System

RGB

viewing

mode

you are displaying

The RGB SELECT function has six modes:
AUTO - Automatically
input signal.

selects the most suitable

STILL Use this mode to display VESA standard
computer).

mode fk_rdisplaying

tile

signals (still image from a

MOTION - Use this mode for moving images from a computer.
the signal to RGB signal for best viewing.

Converts

WIDE1- Prevents horizontal compression when the input signal is 852 dot
X 480 line signal with a horizontal frequency of 31.7kHz.
WIDE2 - Prevents horizontal compression when the input signal is 848
dot X 480 line signal with a horizontal frequency of 31.0kHz.
I)TV - This mode is primarily used to optimize picture quality if you are
using a generic brand I)TV receiver which outputs signal at 4g0P
(progressive scan) lines.

To change the RGB SELECT mode:

OPTIONS

AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
HD SELECT

: VIDEO1
:" CMPNT1
: RGB1
: RGB2
:4AUTOI_
: 1080A

PICTURE SIZE

: ON

SEL.

4_ ADJ.

Highlight the RGB SELECT optkm.
Use the • button to scroll through
switch as follows:

the mode choices. The settings

_-_AUTO _" STILL _- MOTION "--_WIDEI"_"

WIDE2 -_ DTV

r_I_RETURN

This is the OPTIONS menu with the RGB
SELECT option highlighted.

From the main menu, highlight and select the OPTIONS menu. The
OPTIONS menu is displayed.

When the desired mode is selected,
press the ._ button to return
the OPTIONS
menu items. You can continue
making adjustments
wiflfin the OPTIONS menu. press GO BACK to return
menu or press ('.LEAI_. to exit the menu system

Chapter

to the previous

The

System

Setting the Monitor

to the correct HD Receiver Mode

The HD SELECT _nction allows y_m to select tt_e correct mode _)r the monitor to work with your
HI) receiver. The default setting is 1080A. This is the correct setting 12)rall RCA and PROSCAN HD
receivers. If you have another brand of HD receiver, your picture may appear broken or off-center.
If so, you need to switch HD SELECT modes.
1080A - Use this option for RCA or PROSCAN HD receivers.
1080B - Use this option if you have any other brand of HD receiver.
To change the receiver
1.

mode:

From the main menu, highlight

and select OPTIONS. The OPTIONS menu is displayed.

Highlight

Use the II_button to select the desired mode (1080 A or 1080 B).

When the desired number is selected, press the _ button to return to
the OPTIONS menu items. You can continue making adjustments
within the OPTIONS menu, press GO BACK to return to the previous
menu or press MENU or CLEAR to exit the menu system.

Setting
This is the OPTIONS menu with the HD
SELECToption highlighted.

the HD SELECT option.

the Picture

Size for RGB Input

The PICTURE SIZE option is used to adjust the picture size when the
input signal is RGB. Use this feature for graphic arts and checking
photos. In TRUE mode, there is no distortion of the picture. In NORMAL
mode, the picture will be scaled vertically but will keep the correct
aspect ratio.
ON - When the picture size option is on and in NORMAL mode, the
picture is scaled to fill the screen vertically while horizontally keeping the
correct aspect ratio. In FULL mode, the horizontal will be scaled to fit the
screen.

BNC SELECT

RGB2

RGB SELECT

: RGB

HD SELECT

: lO_A

_"g_t_,_l
€ SEL.

<> ADJ.

:_ON,
[_r_i_RETURN

OFF - When the picture size option is off, TRUE mode displays the
picture pixel-R)>pixel, exactly the size of the image. If FULL mode, the
image is scaled to fit the screen.
Note: When using a DTCIO0 HD receiver, the only available mode is
FULL. The picture will be scaled to fill the screen,

This is the OPTIONS menu with the PICTURE
SIZE option highlighted.

Chapter

The

System

The Setup Menu
The

SETUP

nlenl.i

controls

the

way

your

monitor

communicates.

Confirming the Frequencies, Polarities, Mode and Resolution of
Input Signals
The FREQUENCY function is used to confirm the frequencies,
the signals coming from a computer.
To confirm frequencies,

polarities,

polarities, mode and resolution

mode and resolution:
1.

From the main menu, highlight
SETUP menu is displayed.

and select the SETUP option. The

Highlight the FREQUENCY option and press OK.

The FREQUENCY screen is displayed.
Press GO BACK to return to the SETUP menu, or press CLEAR to exit
the menu system.

This is the SETUP menu with the FREQUENCY
option highlighted.

H. POLARITY

: NEG.

V= POLARITY

: NEG.

MODE

RESOLUTION

640 X 480
r'_J_l RETURN

This is the FREQUENCY screen.

Chapter

The

Selecting

System

the Language

for the Menus

The menu display can he set to one of three languages:
English. To change the delimit setting:

MENU LANGUAGE

English, French or Spanish. The detkmlt is

From the main menu, highlight and select the SETUP option. The
SETUP menu is displayed.

Highlight the MENU LANGUAGE option. The MENU LANGUAGE
screen is displayed.

Use the • button to scroll through
settings switch as follows:

F .(;AIS
4.
This is the MENU LANGUAGE screen with
Spanish as the selected language.

the language choices. The

ESPA OL

When the desired language is highlighted, press GO BACK to return
to the SETUP menu. You can continue making adjustments within
the SETUP menu, press GO BACK to return to the main menu, or
press CLEAR to exit the menu system.

Setting

the Video

Signal

Format

The COLOR SYSTEM option is used to set the video signal format.
Different countries used different formats l;:)r video signals. The AUTO
option automatically detects the correct video signal and sets the correct
format. This setting should not be changed.

Chapter

The

The Autotuning
Autotuning

System

the Component

buttons

on the Remote

Control

The AUTOTUNING feature lets you easily program the component buttons on the remote to operate
the components hooked up to the monitor. 12) autotune your components to the buttons on the
remote:

From the main menu. highlight and select the AUTOTUNING SETUP
option. The AUTOTUNING SETUP menu is displayed.

This is the AUTOTUNING

SETUP menu with

the DVD BUTTON option highlighted.

Chapter

Highlight an option which corresponds
to a component
which
you've connected.
For example,
if you have a DVD player
connected,
highlight
the DVD BUTTON option.

Use the _. button to scroll tl_rough the output choices. Select the
choice which corresponds to the jacks you used to connect the DVD
player. In the example illustration on the right, the DVD button on
the remote will operate the component connected to the CMPNT1
jacks (the DVD player).
When the desired option is displayed, press the • button to return
to the AUTOTUNING menu options. You can continue making
adjustments within the OPTIONS menu, press GO BACK to return to
the previous menu or press CLEAR to exit the menu system.

The

System

Sleep Timer
The sleep timer is a feature that allows yoll to set tile monitor to turn off after a prescribed
of time. It can be set to turn tile power off after 30, 60, 90 or 120 minutes.

amount

Setting the Sleep Timer
1. Press the SLEEP button on the remote

to turn on the timer. Tile default is 30 minutes.

2. Press tile SLEEP button again to move to the next time increment.
until you get to the desired time.

_30_

Press the SLEEP button

60_90_120-_0_

3.The timer starts when the Sleep display disappears

To check the Remaining

from the screen.

Time:

1. Once the sleep timer has been set and tile menu has turned off, press the SLEEP button
once.

2. The remaining

time is displayed,

then disappears

3. When five minutes remain, the remaining

Cancelling

after a few seconds.

time appears

until it reaches

zero.

the Sleep Timer

1. Press the SLEEP button twice in a row.
2. The sleep timer is canceled.
NOTE: After the power is turned off"with the sleep timer, a slight current is still supplied
to the monitor. If you do not plan to use the system for a long period of time, turn the
power off with the remote or on the unit.

Chapter6

HAPTER

Other Information
Chapter

Overview:

• Installation
•

Connecting
Computer

Your PC or Macintosh

• Specifications
• Troubleshooting
• The Menu System
• Supported
•

Limited

Resolution

Warranty

• Accessory

Information

Other

Information

Installing

the Cinema

Screen

Monitor

IMPORTANT
• This device cannot
•

For correct
dealer.

stand on its own. Be sure to use a stand or original

installation

Failure to follow correct
Product

Attaching

and mounting
mounting

it is strongly recommended

procedures

warranty does not cover damage

optional

mounts

or stand

mounting

unit.

to use a trained, authorized

could result in damage to the equipment

caused by improper

to the Cinema

Cinema Screen

or injury to the installer.

installation.

Screen

monitor

The Cinema Screen monitor can be mounted on tile wall using an optional wall mount or you can attach a floor stand (also
optional). For more information on mounting your Cinema Screen Display, see your Cinema Screen dealer.
If you choose to use the optional wall mount, it can be attached
ways:
•
•

to the Cinema Screen monitor

in one of the l_)llowing two

While it is upright.
While it is laying with the screen face down. If you choose this option, lay the protective
around the monitor beneath the screen surface so it doesn't get scratched.

Ventilation

requirements

To allow heat to disperse,

for

enclosure

leave space between

sheet that came wrapped

mounting
surrounding

objects as shown on the diagram helow when installing.

--.-

I
50mm (2")--*

i 50mm(2", 1

1"--

1240mm (48.8")
,

E
E

50mm

(2")

E
E
0
L¢3

Chapter

Other

Connecting
Computer

Your PC Or Macintosh

Mini

Information

D-sub 15 Pin VGA Signal

Composition

Connecting your PC or Macintosh computer to your
Cinema Screen monitor will enable you to display
computer images on the monitor. The Cinema Screen
monitor supports the signals descrihed on page 48.
To connect
adapter:
1.

to a PC, Macintosh

or compatible

graphics

Turn off the power to your monitor and computer.

2. If your PC does not support XGA/SVGA/VGA you will
need to install an XGA!SVGA/VGA graphics board.
Consult your computer's owner's manual for your SXGA/
XGA! SVGA/VGA configuration. If you need to install a
new board, see the manual that comes with your new
graphics board for installation instructions.
3. The Cinema Screen monitor provides signal
compatibility with VESA 128021024@60MHz (SXGA).
However, we recommend not using this resolution due to
image readability on the monitor's 853 X 480 native pixel
resolution panel.
4. Use the signal cable that's supplied to connect your
PC or Macintosh computer to the Cinema Screen monitor.
For Macintosh. you will need a monitor adapter (not
supplied) to connect to your computer's video port.
5.

Turn on the monitor and the computer.

6. If the Cinema Screen monitor goes blank after a
period of inactivity, it may be caused by a screen saver
installed on the computer you've connected to the
monitor.
When using a Macintosh with the Cinema Scteen
monitor, tile following three display standards arc
supported using tile included Macintosh adapter : 13" fixed
mode, 16" fixed mode. and 19" fixed nlode. The 13" fixed
mode
is recommended
for the Cinenla Screen 111onitor.

Chapter

Pin No.

Signal

to be connected

RED

GREEN

BLUE

No connection

GND

RED

GREEN

BLUE

No connection

SYNC

No connection

SDA

H. Sync

V. sync

SCL

or sync.

on Green

(GND)
(GND)
(GND)

(GND)

Other

Information

Specifications
I 89"

ProductName

PHD50300
CinemaScreenMonitor

ScreenSize

43.5"(H)X 24.5"(V)inches
1106(H)X 622(V)mm

AspectRatio
Resolution
ColorReproduction
Input Signals
RGBinput terminals
RGB1
RGB2
RGB3
VideoInputterminals
Video1
Video2
Video3
DVD/HD/DTV
Audio
ExternalControl
SoundOutput
PowerSupply
CurrentRating
PowerConsumptiOn
Dimensions(WxDxD)

.....

"""'-'........

H-t231"

435"

diagonal
50"
16:9
1365(H)X 768(V)pixels
256levels,16,770,000colors
RGB,NTSC(3.584.43),PAL(B,G,M, N),
PAL60,SECAM,
HD.1, DVD.1, DTV*

mini D-sub 15-pin
BNC(R, G, B, H/CS,V) Xl
DVt-I2g-pinX 1"2

Thefeaturesand specificationsmaybesubjectto change
withoutnotice.

RCA-pinX 1
BNCX 1
S-Video:DIN4-pinX 1
RCA-pin(Y,P,[C=!,P,[C,])
StereoRCAX 3
D-sub9-pinX1(RS-232C).
7W+7Wat6 ohm
AC120V50/60Hz

* HD/DVD/DTV
inputsignalssupportedon this system
480P (60
525P (60
625P (60
720P (60

Hz)
Hz)
Hz)
Hz)

4801 (60 Hz)
5251 (60 Hz)
6251 (60 Hz)
7201(60 Hz)
10801(60 Hz)

5.9A(maximum)
595W(typical)
1240X 766X 107ram(w/ostand)
48.8X 30.2X 4.2inches(w/ostand)
1240X 826X 400ram(with stand)

NetWeight
Environmental
Considerations
Operatingtemperature
Humidity
Altitude
Storagetemperature
Humidity
FrontPanelUserControls

46 Kg/101.3Ibs.(w/ostand)
O°Cto 35°C/32°Fto 95°F
20 to 80%
0 to 1900m/0 to 6239 ft.
-10°C to 5g°c/14°F to 122°F
10to90%
Poweron/oft, Input source select
Volume up/down/OSDcontrol

OtherFeatures

Power Management, plug and play (DDCl,
DDC2b, RGB3: ODC2bonly)

Accessories

Remote control with two AA batteries, RGB
cable (Mini D-sub 15 pin to Mini D-sub 15-pin
connector), power cord, safety metal fitting,
strew for safety metal fitting, User's Manual

Regulations

ULapproved (UL 1950, CSA950)
DOCCanadarequirements
Meets FCCclass B requirementsfor home
application

Chapter

Other

Information

Troubleshooting
Before requesting

service, check the adjustments,

operations,

etc.

Symptom

Possible Problem

Solutions

Pictureis disturbed.
Soundis noisy,
Remotecontrolunit operateserroneously.

• Is a connectedcomponentsetdirectlyin front
or at the sideof themonitor?

• Leavesomespacebetweenthedisplayand
connectedcomponents.

Theremotecontroldoesnotwork.

• Remotecontrolbatteriesmaybe dead.
• Remotemay bein wrongmode.

• Replacebothbatterieswith newones.
• Presscomponentbuttonfor desiredcomponent.

Monitor'spowerdoesnotturn on whenthe
remotecontrol'spowerbutton is pressed,

• Is the monitor'spowercordpluggedintoa
poweroutlet?

• Plugthe monitor'spowercord intoa power
outlet.

• Are all the monitor'sindicators
off?

• Pressthepowerbuttonon the monitorto turn
on the power.

Monitordoesnot operatewhentheremote
control'sbuttonsare pressed.

Nosoundor pictureis produced.

; • Is the remotecontrol pointedat themonitor,
or is therean obstaclebetweenthe remote
controlandthe monitor?

• Pointthe remotecontrolat the monitor's
remotecontrol sensorwhenpressingbuttons,
or removethe obstacle.

• Is direct sunlight or strong artificial light
shining on the monitor's remote control
sensor?

• Eliminate the light by closing curtains, pointing
the light in a different direction, etc.

• Remote control batteries may be dead.

• Replacebothbatterieswith newones.

• Is the monitor'spowercordpluggedintoa
poweroutlet?

• Plugthe monitor'spowercord intoa power
outlet.
I

• Is the sourcevideoconnectedandon?

• Makesuresourcevideo(VCR,DVD,DTC)is
connectedandturnedon.

• Is thevolumeset at theminimum?

• increasethevolume.

• Is the mutemodeset?

• Pressthe remotecontrol'smutebutton.

• Arethe speakersproperlyconnected?

• Connectthe speakerspropedy.

Tintis pooror colors areweak.

• Arethe tint andcolors properlyadjusted?

• Adjustthetint and color(underPICTURE).
• Returnto factoryreset.

Nothingappearson screen.

• ts the computer's power turned on?

• Turnon thecomputer'spower.

• Is a video source connected?

• Connectvideosourceto the monitor.

,_Is the power manager function in the
STANDBYor OFFmode?

• Operatethe computer(movethemouse,etc.).

Part of picture is cut off or picture is
not centered.

• Is the picture position adjusted correctly?

• Adjust the picture from the SCREENmenu.

Image is too large or too small.

• Is the screensize adjustedcorrectly?

• Pressthe WIDE/AUTOWIDE button on the
remote control and adjust properly.

Picture is unstable.

• Is the computer set at the correct resolution?

• Set to the proper resolution.

Picture appears but no sound is produced.

I " Is the HD receiverset to the correct mode?

Chapter

• Set HD receiver to the correct mode (page 29).

Other

Information

The Monitor

Menu System

Main menu

Sub menu

Functions

PICTURE QUALITY

CONTRAST

Adjusts the contrast.

BLACK LEVEL

Adiusts the brightness.

SHARPNESS

Adjusts the sharpness.

COLOR

Adjusts the color density (video input only).

TINT

Adjusts the picture tint (video input only).

PRESETS

Sets the picture mode according

COLOR TEMP.

Adjusts the color temperature

NOISE REDUCE

Reduces noise visible in image,

Main menu

Sub menu

Functions

AUDIO

BASS

Sets the bass.

TREBLE

Sets the treble.

BALANCE

Sets the left/right

Main menu

Sub menu

Functions

SCREEN

V-POSmON

Adjusts the vertical

H-POSITION

Adjusts the horizontal

V-HEIGHT

Adjusts the vertical size of the picure.

H-WIDTH

Adjusts the horizontal

AUTO PICTURE

When turned

FINE PICTURE

Adjusts for flickering

PICTURE ADJ.

Adjusts for striped patterns

Main menu

Sub menu

Functions

FUNCTION

DISPLAY

Turns the on-screen display on and off.

MENU ADJUST

Adjusts the vertical and horizontal

POWER SAVER

Sets the monitor

GRAY LEVEL

When viewing
the picture.

FILM MODE

When turned

RGB3 ADJUST

Adjusts the display position in RGB3 input.

SCREEN SAVER

Used principally for PC operation.
PLE sets the luminance level to a fixed mode to reduce the effects of
phosphor aging.

to the video environment.
and white

balance,

balance.

picture position

of the picture on the screen.

picture position

of the picture on the screen.

size of the picure.

on, automatically

adjusts for flickering

and striped patterns.

in the picture.
in the picture.

position

for use as an energy-saving

of the menu display.
display when used with a computer.

a picture with 4:3 aspect ratio, sets the luminance

to AUTO, selects the correct viewing

ORBITER moves the image around
effects of phosphor aging.

of both sides of

format.

the screen intermittantly

to reduce the

INVERSE works in RGB mode only. Inverts the video signal, playing the image
in a negative format.
RESET

Resets ALL the settings to the factory default

values.

Chapter

Other

Information

Main menu

Sub menu

Functions

OPTIONS

AUDIO INPUT

Allocates audio connectors.

BNC SELECT

Sets BNC connectors to either composite or component

RGB SELECT

Sets the appropriate
mode for the computer image.
RGB (VGA signals), VIDEO (Moving picture), WIDE (WIDE VGA) DTV.

HD SELECT

Sets correct mode for your HD digital

PICTURE SIZE

Sets the picture size for RGB input.

Main menu

Sub menu

Functions

SETUP

FREQUENCY

Confirms the frequency and synchronizing polarities
being inputted.

MENU LANGUAGE

Sets the language of the menus (English, French, or Spanish)

COLOR SYSTEM

Sets the VIDEO format. Keep this set to AUTO.

Main menu

Sub menu

Functions

AUTOTUNING SETUP

HD RCVR BTN

Autotunes the HD RCVR button on the remote
your HD receiver is hooked up to.

AUX BUTFON

Autotunes the SAT2 button on the remote
satellite receiver is hooked up to.

VCR1 BUTTON

Autotunes the VCR button
VCR is hooked up to.

on the remote

control to the input that your

DVD BUTTON

Autotunes the DVD button on the remote
DVD player is hooked up to.

control to the input that your

Chapter

video_

receiver (1080 A or 1080 B).

of the signal currently

control to the input that

control to the input that your

Other

Information

Supported

Resolution

• When screen mode is NORMAL, each signal is converted to 640 dot X 480 line signal (except for *3).
• When screen mode is FULL, each signal is converted to 853 dot X 480 line signal (except for *2).
Notes:
• With Digital inputs some signals are not accepted.
• The sync may not be disturbed when non-standard signals other than the previously
• When connecting a composite sync signal, use the HD terminal.

Model

Dots X lines

31.5
31.5
37.9
37.5
43.3
51.1
61.3
31.0
31.7
35.2
37.9
48.1
46.9
53.7

NEG
NEG
NEG
NEG
NEG
NEG
NEG
POS
NEG
POS
POS
POS
POS
POS

NEG
NEG
NEG
NEG
NEG
NEG
NEG
POS
NEG
POS
POS
PO8
POS
POS

YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES

998
120.0
600
70.1
75.0
85.0
100,6
75.0
56.2
80.0
59.9
60.0
75.0
85.0
60.Q
65.0
70.0
75.0
667
746
74.9
75.1
60.0
71.2
72 O

63.0
75.7
48.4
56.5
60.0
68.7
80.5
67.5
45.1
47.7
48.3
64.0
80.0
911
75.0
81.3
675
93.8
35.0
49.7
602
68.7
646
75.1
78.1

POS
POS
NEG
NEG
POS
POS
NEG
POS
POS
POS
NEG
POS
POS
POS
POS
POS
POS
POS
Syncon G
Syncon G
Sgnc on G
Syncon G
NEG
NEG
.......

POS
POS
NEG
NEG
POS
POS
NEG
POS
POS
POS
POS
POS
POS
POS
POS
POS
POS
POS
Syncon G
Syncon G
Syncon G
Syncon G
NEG
NEG

YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
....
....
....
YES
YES

YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES

1280X 1024
1024X 768
1280X 1024

560
760
761
60.0
60.0

61.8
711
811
497
639

C Sync
C Sync
C Sync
.....
.......

C Sync
C Sync
C Sync

-_
- - ....

768 X 576
640 X 480

50.0
599

314
315

NEG
NEG

1024X 768

1600X 1200

WorkStation
(SUN)
Work Station
(SGI)
IDC-30OOG
PAL625P
NTSC525P

Presence
Horizontal
Vertical

(kHz)

1152X 864
1280X 768
1360X 765
1376X 768
1280 X 1024

Work Station
(EWS4800)
Work Station
(HPI

Sync Polarity
Horizontal
Vertical

70.1
59.9
72.8
75.0
85.0
100.4
120.4
60.0
60.0
56.3
60.3
72.2
75.0
85.1

840 X 460
852 X 480"t
800 X 600

*Apple
Macintosh*_

Horizontal
frequency

(Hz)
640 X 400
640 X 480

*IBM PC/AT
¢ompaSble
computers

Vertical
frequency

640 X 490
832 X 624
1024X 768
r152 X 870
1280X 1024
!280 × 1024
1152X 900

YES
YES

- YES
YES

mentioned

are input.

Screenmode
NORMAL
(4:3)
YES"2
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES*a
yES*a
YES*3
YES*a
YES'a
YES
YES
YES
YES
YES*"
YES.4
yES*4
YES
YES
YES
YES
YES
YES
YES*3
YES
YES"
YES*'
YES*_

RGB

TRUE

FULL

select "_

YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
-- _
__
-_
-_
- - ---------YES
YES
__
-- - __

(16:9)
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES*a
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES

-STILL
-STILL
---WIDE2
WIDE1
STILL
STILL
-----STILL
-STILL
--STILL
WIDE/
WIDE1
WIDE2
STILL
---- ---------

_
-

YES
YES

YES
YES
YES,4
YES'3
YES*4
YES.7
YES*_

- _
- _

YES
YES
YES
YES
YES

YES'r
YES'7

----__
MOTION

Chapter

Other

Only

Aspect

when

The

picture

The

aspect

Normally

To connect

Other

15_pin

using

ratio

a gra phic accderator

is 5:4. "Ilfis signal
is displayed

in the

I×mrd

is converted
original

that

is capable

to a 6('_ X 4_0

5:4. This

signal

is converted

the RGB

SELECr

mode

is set automatically.

connector,
Screen

monitl_r
use

modes

to a Macintosh

848 X 48/).

signal.

resolution.

raliois
the

o[ displaying
line

Information

_o a 91XI dot

comptJtcl;

X t_ ¸ 70_

If the picttlre
u_e a D_sub

line signal.
is not

15-pin

displayed

inoni_or

adaptor

properly,
with

s_'t tht_ m_×lc
your

computer's

Iol the

input

signals

lislcd

video

l×_rt

If your

coll_l;,tlter

in the

talkie

ha_, a l)-sub

:in RGB cable¸
are

also

available.

N'O fc$;

When the input signals comply with the resolution listed in the tid)le alx_ve, tilt: position and size of the picturemay need to I_e adjusted
When a 1280 X 1024 line signal or a 1600 dot X 1200 line signal is input, the picture will be compressed
This monitor has a resolution of 1365 dot X 7bg line. It is recommended
Ihat the input signal be XGA, wide XGA, or equivalent.
Some signals are not accepted with digital input
The synch may be disturbed when a nonstandard
signal other than those previously mentioned is Jnpul.
If you are connecting

a composite

synch signal, use the HI) terminal

IBM is a registered trademark of lnmrnational Business Machines Corporation of the United States.
* Macintosh is a regisEered trademark of Apple Computer, Inc. of the United States.

Chapter

Other

Information

RCA Plasma Monitor
Limited Warranty
'What your warranty covers:
•

Defects in materials or workmanship.

For how long after your purchase:
•
•

One year from date of purchase
One year from date of pumhase

for labor.
for parts.

The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm,
whichever comes first.

What we will do:
Pay an Authorized

Service Center the labor charges to repair your unit.

Pay an Authorized

Service Center for the new, or at our option, refurbished

replacement

parts required to repair your unit.

How you get service:
•
•

Call 1-800-433-8974 and have your unit's date of purchase and model/serial
A representative will troubleshoot your problem over the phone.

•

If the representative determines
Service Center in your area.

•

Contact the Service Center and arrange for home or pick up, repair, and return service, provided that your unit is located
within the geographic territo W covered by an Authorized Service Center. If not, you must take your unit to the Service
Center location at your own expense, or pay for the cost the Service Center may charge to transport your unit to and from
your home.

•

Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the
warranty" period must be presented to obtain warranty service. For rental firms, proof of first rental is also required.

What
•

your warranty

does not

Damage

and related
resulting

•

Sigrml reception

•
•

Dalnage

from non-approved

misuse

froln

how

to install, adjust,

and operate

your unit.

Any aclditi(mal

adjustments.

problems

installation

not caused

by your

methods.

unit.

or neglect.

that has been

A unit purchased
Acts of nature,

Product

modified

or sm_'iced

or incorporated

outside

such as but not limited

into oilier

products.

tile LI.S.A.
to lightning

damage.

Registration:

Please
should

cover:

Batteries.
A television

•

that you shoukl receive service, they will provide you with the name(s) of the Authorized

Customer
instruction.
(Your Owner's
Manual describes
information
should he obtained
from your dealer.)
Installation

number ready.

complete
and mail the Product Registration
Card packed with your unit.
it ever be necessm T. The return of the card is not required
for warranty

It will make
coverage.

it easier

to contact

you

Chapter

Other

Information

Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER
WARRANTIES, EXPRESS OR IMPLED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WR1TFEN INFORMATION
GIVEN BY THOMSON MULTIMEDIA INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR 1N ANY
WAY INCREASE THE SCOPE OF THIS WARRANTY.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY 1S THE EXCLUSIVE REMEDY OF THE
CONSUMER. THOMSON MULTIMEDIA INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY
ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

How State Law relates to warranty:
•
Some states do not allow the exclusion nor limitation of incidental or consequential damages,
an implied warranty lasts, so the above limitations or exclusions may not apply to you.
•

or limitations on how long

This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.

If you purchased your unit outside the United States:
•
This warranty does not apply. Contact your dealer for warranty information.
Service

calls

of such

service

Chapter7

which
calls

do not
are

involve

the sole

defective
responsibility

materials

or workmanship

are

not covered

by this

warranty.

Costs

of the purchaser.

Accessories
The accessories

listed below

are available

from },'our Cinema

Attachable

Speakers

Screen

- SPK50

T
Monitor

Dealer.

Stand - PLB50

See your dealer

for prices.

Index
Symbols
1080A 39
1080|3 39

A
Antenna
Arrow

button

picture

Autotuning
At.ix button

Gain 27
Go back button 13
Gray level 3q
Guide button 13

Navigating
the nit'ntis
Noise Reductkm
28
Nuinber

buttons

ItD select 40
HD RCVR button
HI) Receiver

Balance 29
Bass 29
Batteries 9, 15
Bias 27
BNC select 38
Black level 26

OK button
14
On-Off button 14
On-screen Menus 23
Display position 32
Options menu 38, 31
Orbiter
36

Connecting 9
HD receiver 9
HD Receiver Mode
1080A 40
1080B 40

43, 51
13

P
Personal

lnfo button 13
In[)ut button 13
Input • Go Back v
Inserting batteries in the remote
hlstallation
46
Floor Stand 46
Speakers ,46
Ventikition requirements
i6
Inverse
36

C
CH+iCH- button 13
Cinema button 13
Clear button 13
CMPNT button 13
Color system 41
Components
Connecting
11
Computers
Connecting
11, 47
Contrast 26
Control Lock 8

J
Jacks g. 11
AC IN g
External Speakers g. 55
External Control 8
Video iniAudk) in 8

COlllptltef

connecting
10, 11, 47
Picture in picture 23
Picture Quality menu 25,
Picture mode
Bright 25
Memory 25
Nonltal 2-3
Preset 25
Soft 25
Picture lX)sRion 31, 32
PIP 23
PLE 34
Polarities of Input Signals
Power 22
Power cord o
Power Saver 33
Power, standby indicator
Progranlming the remote
Presets 28

33
lq

R
I.anguage f)>rthe Menus
!.asel Disc Pla}er i0

Default values
resetting 37. 50
DVD hutton 13
DVD Player 10, 1 I

ReducilCg
Remote

noise

Cock'

I_utton_

( Ollllectillg

[!XD.TI/:II control
Speakers

g
12, qq

Eihn mode

Frequencies
of Input SignaIs
l:tir/cti_);1 menu
32 -_0

b:ttteric's

3,1cnlory Mode 2q
>,lellti

btlllOn

Navigaling

\letltl

•

Re_etting

Sign;t]

Resolutit)n

Xlclhi

\lute

Sign:llx

[)tlnt}i]
ScleC'll

RGB

( ]OlllposlliOl/

c>l lnptlt

MoniIOl

the

PiograI/inling

McP,tk>}stctn 23. +ll
Mini I)->uh Iq Pin VGA
.\[odL'

I'_

P1_)_l;llllln_ll_Ie

displa],

position

Sc:uch

inscltil_g
Mute

\lentl

picttue

13.11

Codes
c( ii//ptlt

in the

Control

:\t_tol_alic

M
)lacintosh

Extetoal

buttons

Audio input
38
Audio menu
29, 50
Automatic
Code Search
Auto

Sck'ct

Menus

Codes

t]_e I_et_l_te

to ck:l-ndt
_)l¸ Inp_lt

xalucs

Signals

i l

I t
]_

Index
S
Safety
Safety

infl_rmation
metal fitting

Screen
Screen
Screen

Saver
menu
size

t, 2
6

35, +,0
30, +_(/

Fill 30
Full 30
Normal

_30

Stadium

31)

Setting

the Color

Temperature

Setup menu
41, 51
Sharpness
26
Sleep

button

Sleep timer
Cancelling

Checking
Setting

44
44

Speakers

12, 55

Specifications
Stand
using

with Cinema

Screen

diaplay

T
TREBLE 29
Troubleshooting

V
VCR 10
VCR1 button 14
VCR2 button 14
Ventilation Requirements
Video button 14
Video 39
Viexxing size
selecting 30
Vohnne 14, 22
\_l+- buttons
Ii, 22

W
\XTaii a nh+
Wide
39

Z
Zoo11/
Zt)oIII

]=1

ii1 ZooIIt

OLI{

htlH()I]S

I i

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 60
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Mon Apr 02 16:59:55 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

RCA Plasma Television Manual L0108046

Navigation menu

Versions of this User Manual:

Views

Navigation