RCA Plasma Television Manual L0108046

User Manual: RCA RCA Plasma Television Manual RCA Plasma Television Owner's Manual, RCA Plasma Television installation guides

Open the PDF directly: View PDF PDF.
Page Count: 60

Safety Information
Precautions
Please read this manual carefnlly before using your Monitor and
keep the manual handy for future reference.
WARNING
TO PREVENTFIRE OR SHOCK HAZARDS,DO NOT
EXPOSETEllS UNIT TO RAIN OR MOISTURE.ALSO 110
NOT'USETHIS UNIT'S PLUG WITH AN EXTENSION
CORD RECEPTACLEOR OTHER OUTLETS,UNLESSALL
PRONGS CAN BE FULLYINSERTED. REFRAINFROM
OPENING THE CABINETAS THEREARE HIGIq-VOLTAGE
COMPONENTSINSIDE. REFERSERVICINGTO QUAI,IFIED
SERVICEPERSONNEL.
Industry Canada Compliance Notice
This Class B digita! apparatus meets all requirements of tilt'
Canadian Interference-Causing Equipment Regulations
Declaration of Conformity
This de_ice complies with Part 15 of the FCC rules. Operatkm is
subject to tile following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Product: Cinenm Screen I)isplay
Equipment Cl:tssification: Class B Conlputer Periphera[
Model: PHI)=,0300
\x:_,hereby declare that the equipment specified above contorms to
the technical smndaMs as specified in file FCCiT.des.
Thon/son multin/cdia Inc.
10330 N. Meridian St.
Indianapolis. IN i6290
PIione: 1-800 133-8974
Cable "ry Installer: This renlinder is ptovided to call )our
attention to Article 820-40 of the National Electrical Code tScctiun
"_t ot tile Canadian Electrical Code. Parl 11xxhich pro\idcs
guidelines Ic_rproper grounding and, in ['nuticulaL specifics that
tilt' cah[e gruutld s]/a][ he c(/nnccted 1o lhe grounding s}rstelll of
t]lC huildh/g as cIosc tl) IIle poi[/t ot cable enlQ :is practical
FCC Information
• FCCRegulationsstatethat unauthorizedchangesor
modifications to this equipment may void the user's authority
to operate it.
This equipment has been type tested and found to comply
with the limits tk/r a Class B Digital Device in accordance
with the spccificatiuns in Part 15 of the FCCrules. These
rules are designed to provide reasonable protection against
radio and television interference in a residential installation.
This equipment generates and can radiate radio flequency
and. if not installed and used in accordance with the
instructions, may cause harmful interference to radio
con_munications. However. there is no guarantee that
interDrence _,ill not occur in a particular installation.
If this equipnlent does cause interference to the radio or
television reception (which you can detennine by turning the
equipment off"and on). try,to correct tile interference by one
or nlore of the lk)lk)wing nleasures:
Reorient or relocate the receiving antenna (.that is.
the antenna for the radio or television that is
"receMng" the interterence/.
Change the position of the monitor with respect to
the radio or television equipment that is receiving
tile interference.
Mo_e tile monitor away fron/ the cquipnlent
receiving tile intcrlc+rence.
I)lug tile inonitor into a dilf_'rent wan outlet so the
receiver and the equipment arc on cliCk:rent hnlnch
circuits.
If these n/ensures do not eli[llinale intcl-lE.rence,please
consuh your dealer or an experienced radio television
technician lor additional suggestions Also. tile Fedend
('omnltmkati{_ns Commission has prepared a helpful
hooklet. "tIo;x 1oIdentify and Resolxc Radio TV Inlerfcrence
Iqoblenls." This hooklcl is a',ailahle fiom the US.
Go_crnnlcra Prmth/g Office. Washington D C., 20t02. Please
specif} stock ntln/l)t.+r 0040011-1)034q-t when ordering copies.
Warnings and Safety Precautions
The monitor is designed and manul_ctured to provide
long, trouble-free service. No maintenance other than
cleaning is required. Use a soft dry cloth to clean the
panel. Never use solvents such as alcohol or thinner to
clean the panel surface.
The display panel consists of fine picture elements (cells).
Although the display panels are produced with more than
99.99 percent active cells, there may be some cells that do
not produce light or remain lit.
For operating safety and to avoid damage to the unit, read
carefully and observe the following instructions.
To avoid shock and fire hazards:
1. Provide adequate space for ventilation to avoid
internal heat build-up. Do not cover rear vents or
install in a closed cabinet or shelves.
The unit is equipped with cooling fans. If you install
the unit in an enclosure, be sure there is adequate
space at the top of the unit to allow hot air to rise and
escape.
If the monitor becomes too hot, the overheat protector
will be activated and the monitor will be turned off. If
this happens, turn off"the power to the monitor and
un-plug the power cord. If the room where the
monitor is installed is particularly hot, move the
monitor to a cooler location, and wait for the monitor
to cool for 60 minutes.
If the problem persists, contact your dealer for service.
2. Do not use the power cord plug with extension cords
or outlets unless all prongs can be completely inserted.
3. Do not expose unit to water or moisture.
4. Avoid damage to the power cord, and do not attempt
to modify the power cord.
.
6.
Unplug unit during electrical storms or if unit will not
be used over a long period.
Do not open the unit which has potentially dangerous
high voltage components inside. If the unit is damaged
from opening the cabinet the warranty will be void.
Moreover, there is a serious risk of electric shock.
7. Do not attempt to service or repair tire unit. Tmnr is
not liable R)r any bodily harm or damage caused if
unqualified persons attempt service or open the back
cover. Refer all service to authorized Service Centers.
IMPORTANT TIPS: Caring for Your
Monitor
To avoid damage and prolong operating life:
1. Use only with 120V 50/60Hz AC power supply.
Continued operation at line vohages greater than 12(1
Volts AC will shorten the life of the unit, and might
cause a fire hazard.
2. Handle the unit carefully when installing it.
3. Locate set away from heat, excessive dust, and direct
sunlight.
4, Protect the inside of tire trait from liquids and small
metal objects. In case of accident, unplug the unit and
have it serviced by an authorized service center.
5. Do not hit or scratch the panel surface as this causes
flaws on the surface of tire screen.
6. For correct installation and mounting it is strongly
recommended to use a trained, attthorized dealer.
7. Like all phosphor-based display devices, monitors can
be susceptible to uneven phosphor aging under cellain
circumstances. Certain operating conditions, such as
the continuous display of a static image over a
prolonged period of time, can result in uneven
phosphor aging if proper precautions are not taken. To
protect your investment in this monitor, please adhere
to the following guidelines and recommendations for
minimizing the occurrence of uneven phosphor aging:
Always enable and use your computer's screen saver
function during use with a computer input source.
Display a moving image whenever possible.
Always power down the monitor when you are
finished using it.
If viewing with a 4/3 aspect ratio for long periods of
time, set side gray level at 3 or 4.
If the monitor is in long term use or
continuous operation take the following
measures to reduce the likelihood of uneven
phosphor aging:
Lower the BRIGHTNESS and CONTRAST levels its
much as possihle without impairing image readability.
Display an image with many colors and color
gradations (i.e. photographic or photo realistic
images).
Create image content with minimal contrast betv, een
light and clark areas (fi)r example, white characters on
black backgrounds). Use complementary or pastel
color whenever possible.
Avoid displaying images with t)w colors and dislinct.
sharply defined borders between colors.
Contents
Safety Information ................................................................................... 1
Warnings and Safety Precautions .............. _.................................................................... 2
IMPORTANT TIPS: Caring for Your Monitor ................................................................... 2
Getting Started ......................................................................................... 5
Contents of the Package .................................................................................................. 6
Part Names and Functions- Front View ......................................................................... 7
Part Names and Functions - Back View .......................................................................... 8
Battery Installation ........................................................................................................... 9
Connecting an HD Receiver ............................................................................................. 9
The Back of the HD Receiver ..................................................................................... 9
Connecting Your VCR Or Laserdisc Player ..................................................................... 10
Connecting Your DVD Player ......................................................................................... 10
Connecting a Personal Computer .................................................................................. 10
Connecting Components to the Monitor ...................................................................... 11
Connecting External Speakers to the Monitor ............................................................. 12
A Quick Tour of the Remote Control ............................................................................. 13
Using Your Remote Control ..................................................................................... 15
Inserting Batteries .............................................................................................. 15
Programming the Remote ....................................................................................... 15
Find Out If You Need to Program the Remote ................................................ 15
How to Program the Remote ............................................................................ 16
Using Automatic Code Search ........................................................................... 16
Using Direct Entry .............................................................................................. t7
How To Use the Remote Control
After You've Programmed It ................................................................................... t7
Programmable Codes for the Remote Control ....................................................... 18
The Menu System ................................................................................... 21
Basic Operations ............................................................................................................. 22
Power ........................................................................................................................ 22
Volume ...................................................................................................................... 22
Mute .......................................................................................................................... 22
Navigating the Menus ............................................................................................. 22
The Multi-Screen Feature ........................................................................................ 23
Selecting the Input Signals to be displayed ..................................................... 24
On-Screen Menu Operation .................................................................................... 24
The PICTURE QUALITY Menu ......................................................................................... 2S
Setting the Picture Mode ......................................................................................... 25
Adjusting the Picture Settings in MEMORY Mode ................................................. 26
Setting the Color Temperature ................................................................................ 27
Reducing Noise in the Picture ................................................................................. 28
The AUDIO Menu ............................................................................................................ 29
The SCREEN Menu .......................................................................................................... 30
Selecting a Viewing Size .......................................................................................... 30
Adjusting the Picture Position and Size .................................................................. 31
Auto Picture .............................................................................................................. 31
Contents
The FUNCTION Menu ...................................................................................................... 32
On-Screen Displays ................................................................................................... 32
Adjusting the Position of the Menu Display .......................................................... 32
Setting the POWER SAVER for Computer Images .................................................. 33
The POWER/STANDBY Indicator .............................................................................. 33
Setting the Gray Level for the Sides of the Screen ................................................ 34
Adjusting for Flickering with Film Mode ................................................................ 34
Adjusting the Display in RGB3 Input Mode ............................................................ 35
Setting the Screen Saver .......................................................................................... 35
Setting the PLE................................................................................................... 35
Turning Orbiter On ............................................................................................ 36
Setting the Inverse ............................................................................................. 36
Resetting to Default Values ..................................................................................... 37
The OPTIONS Menu ........................................................................................................ 38
Setting the Audio Inputs ......................................................................................... 38
Setting the BNC Connectors .................................................................................... 38
Setting a Computer Image to the Correct RGB
Select Mode ..................................................................................................... 39
Setting the Monitor to the correct
HD Receiver Mode ........................................................................................... 40
Setting the Picture Size for RGB input signals ........................................................ 40
The SETUP Menu ............................................................................................................. 41
Confirming the Frequencies, Polarities, mode
and resolution of Input Signals ......................................................................... 41
Selecting the Language for the Menus .................................................................. 42
Setting the Video Signal Format ............................................................................. 42
The AUTOTUNING SETUP Menu .................................................................................... 43
Autotuning the Component Buttons on he Remote Control ................................ 43
SLEEPTIMER .................................................................................................................... 44
Setting the Sleep Timer ............................................................................................ 44
Cancelling the Sleep Timer ................................................................................ 44
Other Information .................................................................................. 45
Installing the Monitor .................................................................................................... 46
Attaching optional mounts or stand to the Cinema
Screen monitor ...................................................................................................... 46
Connecting Your PC Or Macintosh Computer .............................................................. 47
Mini D-sub 15 Pin VGA Signal Composition ........................................................... 47
Specifications .................................................................................................................. 48
Troubleshooting .............................................................................................................. 49
The Monitor Menu System ............................................................................................ 50
Supported Resolution .................................................................................................... 52
RCA Limited Warranty .................................................................................................... 54
Accessories ...................................................................................................................... 56
Index ................................................................................................................................ 57
I_ HAPTER 1
Connections and Setup
Chapter Overview:
• Contents of the Package
Part Names and Functions
Battery Installation
• Connections
A Quick Tour of the Remote Control
Connections and Setup
Contents of the Package
Cinema ,_creen monitor
Power cord
Ferrite cores
RGB cable (Mini D-Sub 15-pin to Mini D-Sub 15- pin connector)
Remote control unit with two AA batteries
User's manual
It is highly recommended that you have your monitor installed by a professional. If you are installing
the monitor yourself, refer to the Reference section.
NOTE: If you are planning on attaching tile floor stand to your monitor (and not the optional wall mount unit) you may
want to use the safety metal fittings (provided) to give your monitor extra stability.
The safety metal fittings attach to the back of the screen and can then be used to secure the monitor to the wall with strong wire.
Contact your trained, authorized dealer for professional installation.
In order to conform to mandatory FCC standards, you must attach the supplied ferrite cores to both ends of the power
cable (see below).
If you are connecting a computer to the monitor, you must attach the ferrite cores to both ends of the DVI cable to meet
FCC standards.
Attaching the ferrite cores
Set the ferrite cores on the both ends of the DVI cable (supplied), and one end of the power cable (supplied). Close the lid
tightly until the clamps click. Use the band (supplied) to secure tbe t;errite core.
DVI cable
(not supplied) band band connector
core (small) core (small)
power cable (supplied) band
core (large) (monitor side)
6Chapter 1
Connections and Setup
Part Names and Functions - Front View
I
VOLUM!
iNPUT GoBACK i
t
POWER• STANDIY
2.
3,
MEnu°OK -If no menu is displayed, brings up the
menu. If a menu is displayed, press to select a
highlighted option.
VOLUME -- Adjusts the volume. When an oil-screen
menu is being displayed, moves hig.hlight up and down
(A and V).
LEFT/-ANDRIGHT/--When Zoom mode is on (press OK
oil tile remote to turn ZOOM on and bFing up tile
zoom icon) press Right/+ to enlarge the image or I.eti -
to reduce tile image.
\Vilen amenu is being displayed, used to navigate
through menu (._ and _. ).
4. INPut • Go BaCK Switches tile input, in tire i'ollowing
order:
_.VIDEO1 _ VIDEO2 _ VIDEO3 _CMPNTI* 1
RGB3 _RGB2**_ RGBI _CMPNT2
t\_;l(,. }oft can set zip (=IllPI_T1 or RGB2, but .or both.
When an on-screen menu is being displayed, returns
you to the previous menu.
(}.
I_OWER/STANI)BY indicator -When the power is on,
the 1_ 1 is green. When the powvr is in Standby
\lode, tile light is red.
Turns the tllonitor's power on and off.
Chapter 1 7
Connections and Setup
Part Names and Functions - Back View
t
A
RIGHT LEFT
e @ @ @
1. EXTSPEAKERLand R - Connect speakers here.
2. AC IN -Connect the included power cord here.
3. VIDEO 1, 2, 3 - Connect VCRs, DVDs, Laserdiscs, etc. here.
4. AUDIO1, AUDIO2, AUDIO3 - Connect audio here.
5. CMPNT1 - Connect Laser discs, etc. here.
6. RGB1 - Connect HD receiver here.
7. BNC SELECT-
RGB2: Inputs the analog RGB signal.
CMPNT2: Connect DVDs, Laserdiscs, etc. here.
8. RGB3 (DVI 29pin) - Inputs a digital RGB signal.
9. CONTROLLOCK When CONTROL LOCK is in the ON position, the buttons on the
monitor's control panel don't function.
10. REMOTE CONTROL - This jack is for connecting a wired remnte, which is primarily _'br
commercial applications. The remote included with your monitor is wireless and doesn't
require connection to the monitor.
11. EXTERNALCONTROL - This terminal is used when the nronitor is controlled by external
equipment.
--3
I
I
®
I
,®
I
I
I
I
I
I
I
I
I
I
J
®
®
®
®
8Chapter1
Connections and Setup
Installingthe batteries
Battery Installation
Remove the battery compartment cover from the back of the remote
control.
Insert batteries. Make sure the polarities (+ and -) are aligned
correctly.
Replace cover.
Connecting an HD Receiver
RCA and PROSCAN HD (high definition) receivers come equipped with an
RGB output jack for optimum quality. Using the RGB cable provided,
connect the HD MONITOR OUT jack on the back of your HD receiver to
the RGB1 (HD MONITOR IN)/AUDIO1 IN jack on the back of the
monitor.
If your HD receiver does not have the type of jack pictured on the right,
connect your HD receiver using the component video jacks and RCA
cable.
For more information on HD receiver connections, see your HD receiver
user's manual.
The Back of the HD Receiver
RGB cable
HD MONITOR OUT jack
Chapter 1 9
Connections and Setup
RCAcables(audio/videocables)are sold as a bundled set.
Connecting Your VCR Or Laserdisc
Player
Use common RCA cables (not provided) to connect your VCR or laserdisc
player to your monitor. To connect your VCR or Laserdisc player:
1. Turn off the power to the monitor and VCR or laser disc player.
2. Connect one end of your RCA cable to the video output connector
on the back of your VCR or laser disc player. Connect the other end
to the video input on the monitor.
,Use standard RCA cables to connect the audio from your VCR or
laser disc player to AUDIO2 input jacks on the monitor (if your VCR
or laser disc player has this capability). Be careful to keep your right
and left channel connections correct for stereo sound.
4. Turn on the monitor and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player user's manual./br more
information about your equipment's tJideo output requirements.
To connect your monitor to a DVD player:
1.
2.
Connecting Your DVD Player
Turn off the power to the monitor and DVD player.
Use a standard video cables to connect your DVD player to the CMNT1 input on the monitor,
or use the DVD player's S-Video output. (Use a standard S-Video cable to connect to the S-
Video input on the monitor.)
3. Turn on the monitor and the DVD player.
Connecting a Personal Computer
If you have a computer with digital RGB output, connect it to the RGB3 jack on the monitor.
For IBM VGA (or compatible) or Macintosh (or compatible) connect to the RGB1 jack on the
monitor.
10 Chapter 1
Connections and Setup
Connecting Components to the Monitor
//
/
/
i
/
/
/
Zl
\
i\
\
\\
\\
\\x
\\
\
.... .,,,,,o..., ........ ,,
VIDEO 1
VIDEO 2
VIDEO 3
LIMONO)
R
0B
LIMONOl
RGB 1
CRII PR
Y IIY
CBII P_
YNC
ENC
LIMONOI
R
RG_ 3
DIGITALRG8
CONTROL
LOCK
onJ_. off_=-
REMOTE
CONTROL
EXTERNAL
CONTROL
VCR or Laser Disc Player
D I I
DVD Player
Signal cable(supplied)
ToMini D-Sub15pinconnectoronthe
PlasmaSync4210W
I
I°1
IBM VGA or Compatibles
I
,' ___ Macintosh or Compatibles
Monitor adapter for Macintosh
Personal computer with a digital RGB output
Chapter 1 11
Connections and Setup
Connecting External Speakers* to the Monitor
The monitor doesn't have internal speakers, so in order to get sound you must connect external speakers, External speakers
can reproduce sound from VIDEO or RGB signal sources.
External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stere{) system
amplifier to the audio outputs.
CAUTION: Unplug the monitor and all connected components before connecting external speakers, Use only speakers
with 6 to &ohm impedance and a power output rating of 7 watts or more.
To connect external speakers directly to the monitor:
1. Strip the ends of the speaker wires.
2. Press down the tabs below the speaker terminals and insert the speaker wire and release the tab to secure the speaker
wire connection.
[a] Connect the right speaker (located at right side of the monitor when viewed from the front) positive (+) ,.',ire to
RIGHT +.
[b] Connect the right speaker negative (-) wire to RIGHT -.
[c] Connect the left speaker negative (-) wire to LEFT-.
[d] Connect the left speaker positive wire (+) to LEFT+.
*'Not included
12 Chapter 1
Connections and Setup
VCR1 ON*OFF MONITOR
DVD VCR2 AOX DDRSVR
&&°&&
MUTE WHO'MULTI
@zOOM/N @
@ OOMO ©
SLEEP GOBACK
GUIDE _INFO
MENU CLEAR
,0,0
'0
,0,0,0
INPUT ANTENNA
©°0 ©
REVERSE PLAY FORWARD
RECORD STOP PAUSE
CINEMA ROB CMPNT VIOEO
OO00
L____ SOURCE
A Quick Tour of the Remote Control
In alphabetical order
ANTENNA When the remote is in HD RCVR mode, switches the HD
receiver between Antenna A and Antenna B.
Arrows Use the arrows to navigate through the menu screens and moves
the Zoom pointer in Zoom mode.
AUX (auxiliary) You can program this button to control any one of the
following: a cable box; most GE, RCA, and PROSCAN audio components;
a laserdisc player; a VCR; or a satellite receiver. Press this button to
operate the component you've programmed to work with the AUX button.
CH+/CH- Changes channels on the HD receiver when the remote is in
HD receiver mode. When the Zoom mode is active, zooms in (CH+) or
out (CH-).
CINENA Press to select one of four screen sizes to suit the type of input
you're watching.
NOTE: When watching the HD receiver, screen size is controlled
through the HD receiver menu system.
CLEAR Clears on-screen displays and returns you to normal viewing.
CMPNT Toggles between CMPNT1 and CMPNT2 inputs.
GO BACK In HD receiver mode, returns you to the previous channel.
When in the menu system, returns you to the previous menu.
GUIDE In HD receiver mode, brings up the on-screen program guide.
INFO Brings up channel information.
INIrtyr Changes the video input.
MENU Brings up the on-screen menu.
MONITOR Turns the power to the monitor on and puts the remote in
Monitor mode so you are able to control the monitor.
MUTE Reduces sound to an inaudible level.
Numbers Use the number keys to make numerical entries.
OK/ZOOM When in Monitor mode (press the MONITOR button) and
using on-screen menus, press OK to select a highlighted menu function.
When there are no on-screen menus displayed, press OK to bring up the
zoom pointer. Using the arrow buttons, position pointer on the part of the
screen you want to zoom on, then use the CH+/- buttons to zoom in/out.
Chapter1 13
Connections and Setup
VCR1 OR-OFF MORITOR
DVD VCO2 AOX HDRCVR
&
MUTE WHO"MULTI
ZOOMO_
SLEEP GOBACK
GUIDE INFO
0
_/_ _OK_ ?_.
MENU CLEAR
'0
7(_8_
INPUT ANTENNA
REVERSE PLAY FORWARD
RECORD STOP PAUSE
CINEMA ROB CMPNT VIOEO
=r_ =,
LSOURCE-----J
ONeOFF Toggles power on and ()ft 12)rthe components that you have
programmed. For example, if you are in VCR mode, turns VCR on and
off.
REVERSE, PLAY, FORWARD, STOP, PAUSE, RECORD (transport keys)
Use with components programmed to work with your remote control
(VCR, DVD player, audio components).
RGB Depending on how you set up the monitor, toggles between RGB1,
RGB2*, and RGB3.
*Note: You can set t@ CMPNT2 OR RGB2, but not both. lf CMPNT2 is
set up, RGB2 will not appear when you use the RGB button.
SLEEP Brings up the sleep timer, which is used to turn the monitor off
automatically after a set amount of time.
VCR1, VCR2, DVD, HD RCVR, MONITOR These are the component
buttons used to put the remote control into the correct mode to operate
that particular component. The correct video source must first be selected
(VIDEO or RGB) or Autotuning must be set up.
VOL</VOL> Adjusts the w)lume.
VIDEO Selects whatever component is hooked up to the video source
inputs.
WHO*MULTI When in Monitor mode. activates the multi-screen feature.
The Multi-screen feature allows you to select a screen mode for viewing a
single picture, side-by-side pictures, or picture-in-picture (PIP). Brings tip
personal viewer profiles for sonle components.
ZOOM IN When in zoom mode (press the MONITOR button an then
the OK button to access zoom mode) enlarges the picture. When in zoom
mode, use the arrow buttons to pan and scan the entire picture.
ZOOM OUT When in zoom mode/prcss the MONITOR button an then
the OK button to access zoom mode) decreases the magnification of thE:
picture. If picture is distorted, ZOOln out to restore to llorma]
14 Chapter 1
Connections and Setup
Using Your Remote Control
Installing the batteries
Inserting Batteries
1. Remove tire battery compartment cover from tire renrote control.
2. Insert batteries (included) as shown on the diagram inside the battery
conrpartnrent.
3. Replace the battery compartment cover.
Use your remote control from a distance of about 7m/23 feet from the
monitor's remote control sensor and at a horizontal angle of within 30 °.
The remote operates on line of sight, so if there is anything blocking the
path between the remote and the remora control sensor on the front of
the monitor, the remote may not work.
Don't expose the remote control sensor on the front of the monitor
to direct sunlight or strong artificial light.
Don't get the remote control wet.
Avoid heat and humidity.
When not using tire renlote for a long period of time, remove the
batteries.
t ....
Approx.
7m/23 ft.
Programming the Remote
The universal remote control that came with your monitor is already
programnred to operate most RCA, GE, and PROSCAN VCRs, DVD
players, laserdisc players, and satellite receivers. This remote is also
capable of operating many other brands of remote-controllable electronic
components, but you must program it to do so.
Find Out If You Need to Program the Remote
To determine whether the universal remote needs to be progranrmed,
turn on one of your componems, such as a VCR. Point the renlote control
at the component and press the component button (for example, the VCR
hutton). Now press the ON.OFF button on the remote. If the component
doesn't turir off. you need to program the remote control in order for it to
operate that component.
c
.:il
Chapter1 15
Connections and Setup
How to Program the Remote
There are two ways to program the remote control: automatic code search and direct entry.
Component Buttons
Theseare thebuttons youprogramto operateanother
component.
Using Automatic Code Search
1. Turn on the component you want the remote to operate (VCR, HD
receiver, etc.)
2. Press and hold the component button that corresponds to the
component you want the remote to operate (VCR, HD receiver, etc.).
While you hold down the component button, press and hold
ON-OFF (when the red light on the remote turns on, release both
buttons).
Note.. Automatic Code Search can't be used with the A UX button.
3. Press PLAY (the red light on the remote starts flashing).
The remote is searching the first set of component codes (there are
several sets of codes). If the component you want to operate doesn't
turn off automatically after 5 seconds, press PLAY again (the red light
starts flashing again as the remote searches through the next set of
codes).
Continue pressing PLAY until the component turns off.
4,
NOTE: If the component doesn't turn off after you 're pressed the PLAY
button 20 times, the component can't be programmed.
Press REVERSE and wait 2 seconds. Repeat this step until the
component turns back on.
5. To finish, press and hold the STOP button until the red light on the
remote turns off.
16 Chapter 1
Connections and Setup
Using Direct Entry
1. Turn on the component you want the remote to operate (the red light on the remote turns
on).
2. Look up the brand and code number(s) for the component on the code list on the following
pages.
3. Press and hold the component button that corresponds to the component you want the remote
to operate (VCR, RCA DVD, etc.).
4. Enter the code from the code list. When you begin entering numbers, the red light on the
remote rams ofT. When the last number is entered, the red light turns back on. If the incorrect
code is entered, the red light will flash.
5. Release the component button. The red light on the remote turns off.
6. Press ON-OFF to see if the component responds to the remote commands. If it doesn't, try
pressing the component button and then ON-OFF again.
6. If you get no response, repeat these steps using the next code listed for your brand, until the
component responds to the remote commands.
How To Use the Remote Control After You've Programmed It
Once the remote control has been programmed successfully, you're ready to use it to operate
other components.
1. Press one of the video source buttons to select a component (VIDEO or RGB) to operate.
2. Press the component button (MONITOR, VCR, DVD, AUX, or HD RCVR) to use the Transport
buttons (REVERSE, PLAY, FORWARD, STOP, PAUSE, and RECORD) to operate the component.
3. Press ON-OFF to turn the component on or off.
NOTE: If you keep pressing buttons and nothing happens, you may have the wrong video
source or wrong component selected. You must select the correct video source and the
component button that matches the component you want to operate.
Chapter 1 17
Connections and Setup
Programmable Codes for the Remote Control
VCR (VCR1, VCR2 or AUX button)
Admiral ...................................................... 2131
Adventura ................................................... 2026
Aiko ............................................................. 2027
Aiwa .................................................. 2002,2026
Akai 2003, 2004, 2005. 2007, 2008, 2111, 2112,
2113
American High ............................................ 2021
Asha ............................................................. 2013
Audio Dynamics ................................ 2009. 2010
Audiovox ..................................................... 2014
Bell &Howell .............................................. 2011
8eaumark .................................................... 2013
Broksonic ........................................... 2012, 2025
Calix ............................................................. 2014
Candle2013, 2014, 2015,2016, 2017, 2018, 2019
Canon ...................................... 2021.2022,2114
Capeha_ ............................................ 2020,2110
Carver .......................................................... 2062
CCE..................................................... 2027,2061
Citizen ...-2013, 2014, 2015. 2016,2017, 2018,
2019.2027
Colo_yme .................................................... 2009
Colt .............................................................. 2061
Craig .............................. 2013,2014. 2023, 2061
Cu_isMathes2000, 2002, 2009, 2013, 2016, 2018,
2021,2022,2024,2115
Cybernex ..................................................... 2013
Daewoo2015,2017,2019,2025.2026,2027,2028,
2110
Daytron ....................................................... 2110
Dbx .................................................... 2009,2010
Dimensla ...................................................... 2000
Dynatech ........................................... 2002, 2026
Electrohome ...................................... 2014, 2029
Electrophonic .............................................. 2014
Emerson2002. 2012,2014, 2015, 2021, 2024, 2025,
2026, 2029,2030, 2032, 2033, 2034, 2035, 2036.
2037, 2038.2039, 2040, 2041,2042, 2044, 2045,
2047, 2065,2105, 2113, 2116.2117, 2130
Fisher ........ 2011, 2023, 2048. 2049, 2050, 2051,
2052,2116
Fuji .................................................... 2021, 2119
Funai .................................................. 2002,2026
Garrard ........................................................ 2026
GE2000,2001,2013,2021,2022,2053,2115,2120
Goldstar ............... 2009, 2014,2018, 2054, 2121
Gradiente ................................................... 2Q26
Harley Davidson .......................................... 2026
Harman Kardon .......................................... 2009
Harwood ................................................... 2061
Headqua_er ................................................ 2011
Hitachi......2002,20S5, 2056, 2057, 2107,2111,
2120,2122
HI-Q ........................................................... 2023
InstantReplay ............................................ 2021
JCL ............................................................ 2021
JCPenney 2009.2010, 2011, 2013,2014, 2021,
2022, 2055, 2056, 2058, 2059, 2060, 2107, 2118
Jensen .................................... 2055, 2056,2111
JVC ..2009,2010,2011,2018,2058,2111,2123
Kenwood ............ 2009,2010,2011,2016,2018,
2058, 2111,2123
KLH ........................................................ 2061
Kodak ......................................... 2014, 2021
Lloyd ............................................... 2002, 2026
Logik ...................................................... 2061
LX_ ....................................................... 2014
Magnavox .......... 2021,2022,2062, 2063, 2104,
2108,2124
Magnin ........................................................ 2013
Marantz...,2009, 2010,2011.2016,2018, 2021,
2058, 2062,2064
Mama ........................................................... 2014
Masushita .................................................... 2021
MEI ............................................................... 2021
Memorex ............ 2002.2011, 2013.2014, 2021,
2023,2026,2104,2131
MGA ........................................ 2029, 2065, 2113
MGNTechnology ........................................ 2013
Midland ....................................................... 2053
Minolta .................................... 2055, 2056, 2107
Mitsubishi ........... 2029.2055, 2056.2065, 2066,
2067,2069,2070,2071,2072,2073.2074,2106,
2113,2123
Montgornery Ward ........................... 2075, 2131
Motorola ........................................... 2021,2131
MTC ......................................... 2002,2013.2026
Multitech ...2002, 2013, 2016, 2026. 2053, 2061
NEC ........... 2009,2010,2011,2016,2018,2058,
2064,2076,2078,2079,2111,2123
Nikko ........................................................... 2014
Noblex ......................................................... 2013
Olympus ...................................................... 2021
Optimus ............................................. 2014, 2131
Optonica ...................................................... 2096
Orion ........................................................... 2035
Panasonic .. 2021, 2022. 2109, 2125, 2126, 2127
Pentax .................. 2016,2055. 2056.2107,2120
Pentex Research .......................................... 2018
Philco ............................. 2021, 2022. 2062, 2063
Philips ............................ 2021, 2062. 2096, 2124
Pilot ............................................................. 2014
Pioneer ................ 2010,2055, 2080. 2081, 2123
Po_land ......................... 2016, 2017, 2019. 2110
PROSCAN ........................................... 2000,2001
Protec .......................................................... 2061
Pulsar ........................................................... 2104
Qua_er ........................................................ 2011
Qua_z ......................................................... 2011
Quasar ..................................... 2021, 2022, 2125
RCA 2000,2001.2003,2013,2021,2055, 2056,
2082,2083,2084,2085,2086,2087,2088,2089,
2090, 2091, 2107, 2115.2120.2125
Radio Shack/Realistic...2002,2011,2013, 2014
2021,2022,2023,2026,2029,2049,2050,2096,
2131
Radix ............................................................ 2014
Randex ......................................................... 2014
Ricoh ............................................................ 2128
Runco ....................................................... 2104
5amsung ..2005,2013,2015,2033,2053,2112
Sanky ................................................. 2131, 2104
Sansui ............................ 2010, 2092, 2111, 2123
Sanyo ...................................... 2011, 2013, 2023
Scott 2012, 2015, 2025, 2032. 2035, 2038, 2065,
2093,2116
Sears2011, 2014, 2021,2023, 2048, 2049. 2050,
2051, 2055, 2056, 2107,2118
Sharp 2002, 2017, 2029, 2094, 2095, 2096, 2131
Shintom ......................... 2004, 2056, 2061, 2098
Shogun ........................................................ 2013
Signature .......................................... 2002,2131
Singer ...................................... 2021,2061,2128
Sony ........... 2002, 2004, 2098,2099,2119,2128
ST5 ................................................. 2021,2107
Sylvania ....2002, 2021, 2022, 2026, 2062,2063.
2065,2124
Symphonic ......................................... 2002, 2026
Tandy ................................................. 2002, 2011
Tashiko ........................................................ 2014
Tatung ............................................... 2058,2111
TEAC .................... 2002,2026,2058,2085,2111
Technics ............................................. 2021, 2109
Teknika ......2002, 2014, 2021, 2028. 2100, 2129
TMK ......................................... 2013, 2024. 2047
Toshiba2015.2049,2051,2055,2065,2093,2116
ToteVision .......................................... 2013, 2014
Unitech ........................................................ 2013
Vector Research ............ 2009. 2010.2015, 2016
Victor ........................................................... 2010
Video Concepts,..2009,201_ 2015.2016, 2113
Videosonic ................................................... 2013
Wards ....... 2002. 2013, 2014, 2015, 2021, 2023,
2026, 2029,2055, 2056, 2061, 2096, 2101, 2102,
2103, 2107.2116, 2131
XR-IO00 ................................... 2021, 2026, 2061
Yamaha .....2009,2010,2011,2018,2058,2111
Zenith .................. 2004, 2098, 2104. 2119, 2128
Cable Box (AUX or HD RCVR button)
ABC..5002.5003, S004,5005,5006, S007,5053
Antronix ............................................ 5008.5009
Archer ............................ 5008, 5009, 5010, 5011
Cabletenna .................................................. 5008
Cableview .................................................... 5008
Century ........................................................ 5011
Citizen ......................................................... 5011
Colour Voice ...................................... 5012. 5013
Comtronics ........................................ 5014, 5015
Contec ......................................................... 5016
Eastern ......................................................... 5017
Garrard ........................................................ 5011
GC Electronics ............................................. 5009
Gemini ..................................... 5018,5019,5049
Generallnstrument .................................... 5003
Hamlin ................. 5020,5021,5022,5035,5045
Hitachi ......................................................... 5003
Hytex .......................................................... 5002
Jasco ............................................................ 5011
Jerrold ....... 5003, 5005, 5007,5018, 5023, 5024,
5046,5053
Magnavox ................................................... 5025
Memorex ..................................................... 5026
Movie Time .............................. 5002, 5027. 5028
NSC ........................................ 5002,5027, 5028
Oak .......................................... 5oo2,5016, 5029
Panasonic ......................................... 5048, 5052
Paragon ....................................................... 5026
Philips......S011, 5012, 5013, 5019, 5025, 5030,
5031,5032
Pioneer .............................................. 5033. 5034
Pulsar .......................................................... 5026
RCA ......................................... 5047, 5049. 5052
Realistic .......................................... 5009, 5049
Regal ............................................... S022, 5035
Regency ..................................................... 5017
Rembrandt ................................................ 5003
Runco ...................................................... 5026
Samsung ...................................... 5014.5034
Scientific Atlanta ....... 5006, 5036, 5037. 5038
Signal .................................. 5014, 5016
18 Chapter 1
Connections and Setup
Signature ..................................................... 5003
SLMarx ........................................................ 5014
Sprucer ........................................................ 5052
Starcom ................................... 5007,5018,5053
5targate ............................................. 5014, 5018
Starquest ..................................................... 5018
Tandy ........................................................... 5040
Teleview ...................................................... 5014
Tocom ...................................... 5004, 5023, 5041
Toshiba ........................................................ 5026
Tusa .............................................................. 5018
TV86 ............................................................. 5027
Unika ....................................... 5008, 5009,5011
United A_ists .............................................. 5002
United Cable ............................................... 5053
Universal ........................ 5008,5009,5010,5011
Vldeoway .................................................... 5044
Viewstar ........................ 5015,5025,5027, 5040
Zenith ...................................... 5026, 5050, 5051
Satellite Receiver
(HD RCVRor AUX button)
Chapparal .......................................... 5056, 5057
Drake ................................................. 5058, 5059
GE ...................................................... 5000,5001
Generalln_uments ................ 5060, 5061, 5062
Panasonic .................................................... 5075
Prirnestar ..................................................... 5076
PROSCAN ........................................... 5000,5001
RCA .................................................... 5000,5001
Realistic ....................................................... 5063
Sony ............................................................. 5072
STSI ............................................................. 5064
STS2 ............................................................. 5065
STS3 ............................................................. 5066
STS4 ............................................................. 5067
Toshiba ........................................................ 5068
Toshiba ........................................................ 5073
Uniden ......................................................... 5069
Audio (AUX button only)
(For RCA and Dimensia brands only)
AM/FM ......................................................... 4003
Aux .............................................................. 4004
Phono .......................................................... 4005
CD ................................................................ 4007
Tape ............................................................. 4006
Chapter 1 19
This page intentionally left blank.
[_ HAPTER 2
The Menu System
Chapter Overview:
Basic Operations
The Picture Quality Menu
The Audio Menu
The Screen Menu
The Function Menu
The Options Menu
The Setup Menu
The Auto Tuning Menu
The Sleep Timer
The Menu System
Basic Operations
Power
To turn the monitor on and off:
1.
2.
3.
Plug the power cord into an active AC power outlet.
Press the ON-OFF button on the remote control or the monitor button on the unit. The
monitor's POWER/STANDBY indicator turns green when the monitor is on.
Press the ON-OFF I,utton on the remote control or the unit to turn it off. The monitor's
POWER!STANDBY indicator turns red and the standby mode is set (only when turning off the
unit with the remote control).
Volume
To adjust the volume:
1. Press and hold the VOL > button (on the remote control or the unit) to increase to the desired
level.
2. Press and hold the VOL < button (on the remote control or the unit) to decrease to the
desired level.
Note: External speakers are required for sound.
Mute
Press the MUTE button on the remote control to reduce the sound to an inaudible level. Press
MUTE again to restore the sound.
GUIDE INFO
0
"_ZOOM"
MENU CLEAR
/
These are the buttons on the remote
you use to navigate through the
monitor's on-screen menu system.
Navigating the Menus
You can adjust monitor options tl',rough the monitor's menu systeln. To
access the main meI_tl, press the ivIENU button on the remote control or
MENU,,OK on the front of tl_e monitor.
There are a few things you need to know to navigate through the menu
system. The navigation buttons are the set of arrov¢-shaped buttons in
the middle of the remote (See illustration on left).
I rse the and buttons ()i_ the remote to move the menu highlight up
and down.
Use the _ and buttons to nlove the highlight and change settings.
Press lhe GO BACK button on the remote to return to a previous lnentL
YOLI can return the luonitor to the facials.' settings al any time by using
the RESET option in the |:UNCTION menu. Rememl_er, it you choose to
reset. AI.L settings will return to the factory settings.
22 Chapter 6
The Menu System
The Multi-Screen Feature
The Muhi-Screen feature is used to show either a single picture or two pictures on the screen at the
same time.
SINGLE - Displays a single picture on the screen.
SIDE BY SIDE - Displays two pictures from different input signals side-by-side.
PICTURE IN PICTURE - Displays two pictures from different input signals; one fills the screen and
one appears in a window on top of the other picture.
To use the Multi-Screen feature:
1. Press the WHOoMULTI button on the remote to select a mode.
2. If side-by-side mode or picture-in-picture mode has been selected, use the left/right arrow
buttons to position the subscreen as shown below.
Side-By-Side
qm
[V,DE02]
Side-by-side 1:
VIDE01 is the
active picture.
Picture-in-Picture
[viDEo2]
main screen
Picture-in-picture
(window on the left):
VIDEO1 is the active
picture.
subscreen
m[VIDEO2 ]
Side-by-side 2:
VIDEO1 is the
active picture.
main screen
I VIDEO2 I Picture-in-picture
(window on the right):
VIDEO1 is the active
picture.
,The active picture (indicated in the ahove illustrations by the double box) is the picture that is
affected he remote actions and menu selections. To switch the active picture, press the OK
button. Press the OK button again to change back to the other picture.
Note: Changing the active picture doesn't change the size or location of the pictures.
Chapter 6 23
The Menu System
Selecting the Input Signals to be displayed
To change the input signals displayed in muhiscreen operations:
[VIDE01]
IVIDEO21
The top screen shows VIDEO1 as the
active picture. The bottom screen shows
VIDEO2 as the active picture.
1.
2.
Press the MULTI button to activate the Multiscreen function. Press the
OK button to make the desired picture active.
Press the RGB, VIDEO or CMPNT button to change tire input signal.
The INPUT-GO BACK button on the front of the monitor can also
be used to change input selection.
On-Screen Menu Operation
To access the main menu, press the MENU button on the remote. The MAIN MENU is displayed on
the screen. The main menu contains a list of all the menus that control your monitor. To select a
menu, use the up/down arrow buttons on the remote to highlight the desired menu. When the
desired menu is highlighted, press the OK or MENU button to select.
Note: Different components use different types of input (RGB, video, etc). 5ome menu
options apply to only one type of input, so they only appear when they apply to the currently
active input. For example, the COLOR and TINT options in the PICTURE QUALITY menu only
appear when you are adjusting standard video input (VIDE01, VIDE02, VIDE03).
24 Chapter 6
The Menu System
The Picture Quality Menu
Setting the Picture Mode with the PRESETS Option
Tile monitor has preset viewing modes that can be selected depending on your viewing
environment. Each preset mode has the contrast, brightness and sharpness adjusted for a specific
viewing sitkl:.ttlon.
bIEMOP,Y This mode alk)ws you to set and save your own picture adjustments.
SOI_ - Use this mode when watching your Monitor in a dark room. Soft mode provkles a
darker, finer picture, like the screen in movie theaters. These settings are preset for you and
can't be changed.
BRIGHT - Use this mode when watching your monitor in a I)right room. This mode provides a
picture with distinct differences hetween light and dark areas. These settings are preset for you
and can't be changecl.
NORMAL - The factory clefault.
To change the picture mode:
"MAIN MENU
AUDIO
SCREEN
FUNCTION
OPTIONS
SETUP
AUTOTUNINGSETUP
€ SEL I_r_ OK i'd_ EXIT
This is the main menu with the PICTURE
QUALITY option highlighted. Press OK to
bring up the highlighted menu.
1. From the main menu, select PICTURE QUALITY. The PICTURE
QUALITY Menu will appear.
2. Highlight the PRESETS option and press the • key on the remote to
select it. The PRESETS window appears.
3. Use the button on the remote to select the desired mode. The
mode switches as follows when the button is pressed:
rMEMORY._- SOFT _BRIGHT _NORMAL_-j
Note: If you don't push the button within 5 seconds, the current
selection is set and the previous screen reappears.
Once you've selected tile desired mode, press OK or MENU. Tile picture
[l!odc is no\v set :rod yot.i are returned to tile PICTURE QUALITY screen.
If yon are using MEMORY mode, you can n/anually adfust tile picture
settings (co[Itlasl. black level, and sharpness) You can continue adjusting
sellings ill I]/c PICI'ITRE QI ALITY menu, return to the main menu, or
c'xit the nlentl system.
"1"oreturn to the main menu, press the GO BACK hutlon on the rem<)te.
To cxiI Ihc _ncnu s},slum, press CLEAIL
Chapter 6 25
The Menu System
Adjusting the Picture Settings in MEMORY Mode
In MEMORY lnod( _, _r()_ (.'all set and save the !_)llowing picture a(ljustments:
CONTRAST - Changes the picture's contrast (between light and dark).
BLACK LEVEL - Makes the picture lighter or darker.
SHARPNESS - Changes the picture's sharpness.
COLOR - Changes color density (video input only)•
TINT - Changes picture tint (video input only).
COLOR TEMP - Changes the color tone.
NOISE REDUCE - (noise reduction)- Removes extraneous infk)rmation from the signal to make the picture clearer.
NOTE: Only the contrast and brightness can be adjusted when a computer signal is used.
Once you have selected MEMORY mode, you can adjust the picture settings. For example, to change the contrast setting:
Pi! _ QUALITY
This is the PICTURE QUALITY menu with the
PRESETS option highlighted,
CONTRAST __]0
1. Use the or • button to highlight the CONTRAST option. Press tile
• button to select it. The CONTRAST window appears. Use • and
buttons to adjust the contrast.
NOTE: If you don't push the _or button within 5 seconds, the
current setting is accepted and the previous screen reappears.
2. Once the contrast is adjusted, press OK or MENU. The contrast is set
and you are returned to the PICTURE QUALITY menu.
3. Use tile same procedure to adjust the black level and sharpness
settings.
4. When you are finished adjusting the picture settings, press GO BACK
to return to the main menu or press CLEAR to exit the menu system.
If the "CONTROL NOT AVAILABLE"message appears when you are
trying to change the picture settings, make sure the preset mode is set to
MEMORY. You can only change picture settings in MEMORY mode. The
other modes are pre-set and can't be changed.
This is the CONTRAST screen.
26 Chapter 6
The Menu System
COLOR TEMP. :4 PRO
This is the COLOR TEMP screen w)th PRO as
the current selection
WHITE BALANCE
GAIN
iem
GREEN
BLUE
BIAS
RED
GREEN
BLUE
.+ ,L -
0_10
:7@_10
,o io
- @ 1o
.. e lo
SEL. 4)' ADJ. _RETURN
This is the WHITE BALANCE screen with the
RED GAIN option h=ghhghted.
RED
This asthe R-GAIN (red gain) screen
Setting the Color Temperature
The (+t)lor tcmpezatute ',,ettmg +,_ontt()l', ho'v, ',van m t[ecl) or +.o( )] (blue))()ur
picture L%The COLOR TFMP option ha s,4 .,ettmg,-.
Normal
\Varm
Pro (lets vou sele+.t -,etttngs m+.hv]duall,, )
Cool
For legulat xlevi rag, Not m.t[, \\.trm or O )ol _sre+.()n>mended The PRO
setung is generally+ used onl}+ior professional apphcauons To <+hat'tgethe
COlOR TEblP setting
1 From the FL+LJmmenu, l'nghhght and select the PICTURE QUALITY
menLl
Use the arrow butt(ms o[1 the remote to hlghhgt'_t the COLOR TEMP
opuon Press the button to seie+.t tt The COLOR TEblP -.creen
appears
3 Use the • and • bt]ttc)t't,_to -.elect the desned COLOR TEMP .,ettm R
The .,ettmg-; swttch +t'+iollov..,+,
r+,+o,,.,,,.-. .-+,o .-+ oo,-q
L/
NOTE: If you dot+'t push the • or button _ ttb*n 5seconds, the
current setting zs accepted and the pre_ *ous screen reappears
4(.)nt_ethe desue+.L<_ok)tte[l_p is '-,cle,_ted pres-, OK ot MENU If \'c,u
,+h¢)o'.e the PRO -,etttt'tg the \\ HITF BAL-\N(.F '<men appcdt +, It allox,..s
inch_ tdu.t[ .,citing ()P \_ hilt and d.tlk I'_aLmce t+.)1e.t+.h +.o[ot _ted, green
and Illuc
GAIN This .tdlusts the colol b.tlance for hgh[ bught colot'_
BIAS This adlu',P_ the co'[lot bal.m+.e lot ddlk colols
T<)d_.mgc the ,,,.hlte I+.tlance G_IN setting
1 H[ghltght the RI:-D GRFF\ <)1BLLF G kin ()ptl<ln and pre-,-, the
button Ih,+ (,kin ".tlecn h)t that +.ol+_t,tppca[-
2-\tJIU'+,tthe Ixtlan+.e Ll'qng the • and • ke'+..
NOTE: It +,ou don't push the or button xxlthtn 5 seconds, the
current setttn,g ,_ accepted and tim pre_ _ou. screen reappears
3 \\ hen _<)u h.txc tile de.,ued sctttt't R p[c-.'. ()K (n J".II-NL_Ihe GMN ]_,
adlu+,ted and :<)u AIL* [etutned to ill,,- \\ HI It i+ \[.-\NCF sttecn
4 \\ h¢_'ll '_()LI L¢)nlpletL.d .ill the de'qt,Jd %%lit(++" i)LIL,LI_Lt.' ,tdlu+,tmetlt-_
i've-,-, thc Go,) BA('Ix l)Llltt)n h) tLltltn it, tilt.+I>IC'ILRF menu "t2)tt(.an
v()ntllltl_ ,Ivllkl_,[lll_,J.) plLttllu' netlll+Lg +, IL)[LII[] [(1 [hL IILLIII1 nle[1tl (_1 pie,',',
+.'L[ \R t() c\[t thL_ ii/t.,nu "-+\'-.iLl/1
Chapter 6 27
The Menu System
Reducing Noise in the Picture
Noise is a term I.ise(I to describe extraneous bits oi lnfortl;atlon In the signal that aff.e,t the
clearness of the picture You can use tile Notse Reduction (NOISE REDUCE) setting dyour
reception is poor or when playing video tapes that ha;e poor picture quaht'.,'
The NOISE REDUCE option has four setting,,, including OFF The higher the setting, the stronger
the effect The settings switch as follows ',',hen tile button is pressed
[-_ OFF _LOW *-_ MEDIUM "--_ HIGH "-]
This is the PICTURE QUALITY menu with the
NOISE REDUCE (noise reduction) option
highlighted.
To change the noise redrlCtlOn setting
From the PICTURE QUALITY menu, hlghhght the NOISE REDUCE
option, and select tt by pressing the button The NOISE REDUCE
SCREEN _sdlsplaved
2 Use the • and • button.s to select the desired noise reducuon
_ettmg
3
NOTE: lf you don t push the or button within 5 seconda, the
clLrrent settlHg ISclcc_'pted and the prez lous sct ee_t leappears
When the desired setting _s dtspla',ed press OK to return to the
PICTURE QUALITY meilu You can continue adlustmg picture
_ettmgb. rettnn 1otile main menu, or press CLEAR to exit the menu
'_Y._tel/i
r
KT.
NOISE REDUCE :4HIGH k
This is the NOISE REDUCE (noise reduction)
screen.
28 Chapter 6
The Menu System
The Audio Menu
The AUDIO menu allows you to adlu_,t the treble, bass and left, nght balance of ,,our external
.,,peakm •
BASS - Change.', the level of low frequency sound
TREBLE - Changes the le',el of high frequency sound
BAL_.NCE - Changes the balance of the left and nght speakers
Menu Operations
To access the AUDIO menu
SEL
This is the AUDIO menu with the BASS option
highlighted. Press the right arrow button to
select it.
1
2
3
-t
From the mare menu, h_ghhght and select the AUDIO optzon The
AUDIO menu ts displayed
Use the and • arrow huttons on the remote to hzghhght an option
(tot example, BASS)
Use the and I>"buttons to adlust to the des*red semng
Yon can continue adlustmg audio settings, press GO BACK to return
to the mare menu, or press CLEAR to exit the menu system
Chapter 6 29
The Menu System
The Screen Menu
The SCREI-N menu allows you to set th_ monitor to aUtolnatically select
the correct nlode for viewing a particular nlovit: and to change tht,
positions of on-screen 111enLIs.
Fill
Normal
Full
Selecting aViewing Size
When viewing with a cnnlponent o/b_,r tb_l/l.yollrHD/-t, ceit%>r* you can
set the screen nlode to one of |()LIrscreen sizes to suit the type of input
you are watching. Select the screen mode with the CINEMA button on
the renlote control. The screen sizes are as Ik)llows:
FILLexpands in both vertical and horizontal directions while the correct
propol_ions are maintained. The picture is not distorted, just closer.
NORMAl displays a picture with a 4:3 aspect ratio (standard video).
Because this mode fills the screen vertically, but not horizontally, black
hars will appear on the right and left sides of the picture.
Note: If viewing with a 4:3 aspect ratio for Iong periods of time,
set side gray level at 3 or 4.
FUEt expands the picture in the horizontal direction only. This option
corrects the aspect ratio of images that have been compressed or
horizontally "'squeezed."
STADIUM expands in both the horizontal and vertical directions, but
varies the amount of stretch depending on the picture - the center of the
picture is almost normal while the edges are considerably expanded.
This mode is intended fk>rwatching video with a i:3 aspect ratio on a
wide screen.
Note: In Stadium mode, only the V-position and H-position are
displayed. You can't change the height and width.
To change tile viewing size:
1 Press the CINEMA button on the remote control.
The c'cuteilt viev, ing size ,.,,ill bc di_,pla}ed. Press the CINEMA hutton
:tgain to sv,itcl_ to tile, l]ex[ size ]'ILL >Size sx,,itches +is loll<>\vs:
FILL _NORMAL _FULL _STADIUM
Note W/Je v e gt, th cHD tlet,er, use t/_e rel¢il,er} _ee ./!)rm, t
_e/e_dous to set t/_eproper trzrio
Stadium
30 Chapter 6
The Menu System
Adjusting the Picture Position and Size
The S('REEN mcnu lets you adjust th_ +position and _izc ot the picture
Tile first two options, V POSITION and tt-POSI'I'ION, adiust the placclnent of the pRtule on the
screen. For example, if the picture is too far to the left, you can use the tI POSITION to tt]{}x't+ it to
the right. To adjust the position of the picture on the screen:
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
SCREEN
NNORMALk
@ 10
@=3 ]Mm=lO
@:==3=mm!O
SEL 4F ADJ. _RETURN
The SCREEN menu with the MODE option
highlighted,
SCREEN
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
:dFULL).
@ JO
@=g::z:+mmmml©
@_"PmJ_+I ©
: OFF
€ SEL. 4!_ ADJ. [_ RETURN
The AUTO PICTURE option only appears if you
have a computer connected,
I. From tile iTlain menu, highlight and select tire SCI'_EEN option. Tile
SCREEN menu is displayed.
2. Use the and butt,:)ns to select tile mode you want to change
3. When the desired mode is highlighted, press tile button. The
sdected mode screen ,,,,'illbe displayed.
Use the arrow buttons to adjust the position of tile picture.
NOTE: If you don't push the an arrow button within 5 seconds, the
current setting is accepted and the previous screen reappears.
4. When you've adjusted to tile desired setting, press tile GO BACK
button on the remote to return to the SCREEN memt.
The V-HEIGHT and H-WIDTH options expand and contract tile size of
tile picture to fill the screen. For example, if the picture is slightly wider
than the screen, you can use the H WIDTH option to shrink the picture
horizontally
Note: These options are not available in STADIUM mode.
To adjust tile screen size:
1. Select the desired option from tire screen menu and press the •
Imtt()n. The selected mode wit'_clow will be displayed.
2. tJse the arrow buttons to adjust tile size of the picture.
NOTE: [/)'olt don't pnsD cln (llron' hutlou tPithi/l 5 S(?COlldS. l]?g
Cll/'rcql/ seltiu£ i,_¢ICC_)te(I and !l_(,prclious scrve/t reappea*_
3. When yotfve aditlsted t() tile desired setting, press OK t() select and
[etuin 1o the SCREEN menu
Auto Picture
'[hc At'l{) PIC[ fiRE funcli{>n :lppc:tl', ill tIR' SC[{EI NiIk=ntl (}l/IV il x{Ytl
hdkL' _1 COI11ptlR!l ('()nlR'LIL'C_ IO IHL +I)_t)!/it{)l \_ IP21/ Ibis R'a{tlrL + i_ tLIII]L'LI
{)11, tl ;ltlt(>lnatR:l]ly _dittsb l]Rl\clilig alld silipcd p:tttcu> lI1:1 c{>illputer
II/l_t!_C 1[ %(}kl \\;LI)[ 10 aditlS[ [[R'_,L + I/l_{l/kl_{ll\
1. So,loot the AI rTO PICFUI'_E (}piton It@in the SCi,_EEN nlcnu. I'icss the
btltl{}l] t(> ttulI/ :X[ "1'0 ]}[CI L'I{E _>11 \\'lien :\(;'10 I}ICTLTRI( Is
tumed{>lt, the I:lXl" PI(]IITRE :lnd PICI'[ Rt" AI).l options clio"
clisplayc'd bencalh it
2 Sc{ctt an {}pll(}t/ ;lilt{ plL'S5 tilL' • I}tl[t{)II ]hc street1 Iol that {)pti{)n
\\ill he clispla,,ed /so" the and I}tltl<)l]s It) :{elitist that {)plion
Pic'ss {)K It) icltili] 1o Ihc S(]I{I{E\ ii/Clltl
Chapter6 31
The Menu System
The Function Menu
Ihe FI]N(]TI()N menu c(mtams options lhat to]H[()l Oll-S_IVL'n displays (o[hel Ih:m the menu
system) and how the pictu(c is displayed¸
FUNCTION
_:4ON,
MENU ADJUST : 1
POWER SAVER : OFF
GRAY LEVEL : 3
FILM MODE : ON
RGB3 ADJ. : 1
SCREEN SAVER
RESET
SEL. 4_ ADJ. _RETURN
FUNCTION
O)SPLAYI : ot_
;M,EN_LI UST: :42,
POWER SAVER Olaf
GRAY LEVEL 3
FILM MODE ON
RGB3 ADJ. 1
SCREEN SAVER
RESET
#SEL _1_ADJ, ,_ RETURN
\/
\/
\/
\/
\/
\/
1 2 "3
4 5 6
. ............. ,, ................ t - ................
7 8)9
The number 2position will display on-screen
menus in the top center of your screen.
On-Screen Displays
On-scrc_:n dispkws (di{ferent than the menu systmn) appea_ by de,huh _t)
give you intorlnation about :in option you have selected. For example,
When you switch inputs tile currently selected input n:.uue (lor example,
CMPNTI ) is displayed on the screen. To turn on-screen displays off:
1 From the main menu, highlight and select the FUNCTION option.
The FUNCTION menu is displayed.
2. tlighlight and select the DISPLAY option. Use the b'0tton to toggle
on-screen disp]tlys on or off.
Nole: Turning the DISPLAY option off does not affec! on-screen
menus. Menus can't be turned off,
3 You can contin0e setting options in the FUNCTION menu, press GO
BACK to return to the main menu. (>rpress CLEAR to exit the menu
system.
Adjusting the Position of the Menu Display
The on-screen menus can de displayed in diff'eren_ positions on the
screen. There are a total of nine possible positions shown in the grid on
the right.
To atl}tlSt the position of the on-screen lltellUS:
I From the mare ntenu, highlight and select the FUNCTION option.
Tile FUNC'I'ION menu is displayed.
2. l lighlight and select the MFNU AI)JUST option. Use the • button (o
Scloll through the n'_enu l)ositi(ms As you press the • I)utton, the
menu _\ilt _u_\e tuotu_,.I to Ihe dit{k:rcnt p<)sitiol'_s
When \(Itl hiD. e tl_., ltlCI1ll ill the desired l)()siti_)n )ou can prt*ss Its<,
i_lc_,s (;1) B.\(IK h_ ictu_n t_ tile' ill,till n_nu, ol prc>s (:LEAR t<> t'xit
[ht' ii]L,l_tl _%_l_,tl]
32 Chapter 6
The Menu System
FUNCTION
DISPLAY : ON
MENU ADJUST : 1
;go'Wt_g'_X_Lql:4ON
GRAY LEVEL : 3
FILM MODE : ON
RGB3 ADJ. : 1
SCREEN SAVER
RESET
SEL 4• ADJ. ['ffiI_W_RETURN
This is the FUNCTION menu with the POWER
SAVER option highlighted,
Setting the POWER SAVER for Computer Images
Ill,_" P()x.X;ER&,\VER function can be ns_.:d when th,::signal _,our_c to the
monitor comus from a computer confolnling to I]lU VE_A I)]>MS[orln;i[
This ftlilCtioi_ atitomatica]ly l+Mdl.l_._s the' monitor's pox_er c()tl_tlmpti(>[1 it
no operation is performed tk)r a certain anlount of time. POWER SAVER
can be turned on o1 <)if.
If tile computer's power isn't turned on or if the comptlter and selector
tuner are not properly connected, POWE.R SAVER is set to OFF.
For instnlctions on using the colnpnter's power nlanagement fllnCtio[i,
see your computer's operating manual.
"Eo turn tile monitor's POWER SAVER function on or off:
1 From the main mentl, highlight and select FUNCTION. The
FUNCTION menu is displayed.
2. flighlight the POWER SAVER option.
3 Use the I_ button to toggle the setting ON or OFF.
4. Yotl can continue making adjustments in the FUNCTION menu,
return to the previous menu by pressing the GO BACK button or
press CLEAR to exit the menu system.
The POWER, STANDBY indicator shows the statl.is of the PO\VER SAVER
function. Sec below fk)r status and description.
POWER/STANDBY indicator
POWER
SAVER
Mode
On
5t:ulclbv
stl_pcl/d
Oil
POWER,
S'IANDBY
indicator
Gret'il
I>cd
Red
Pox_ er Saver
Operating Status
Not activatc]d
:\c Ii_ :iicct
\c lit :tic'el
\tti_ :ilccl
l)escription
Horizontal and \ertica]
synchronizing signals :ire
prcserlt fri)lll [hu COl/lptlfef
Nt) hoHzotlhll s}ilchrt)[/izillg
>l_ll_tlS :IFC t)IttSt'l/[ 11"O111 !lit'
c.t Illlpt IIUI"
No _ crlk ;il s} [/chn)nizin_d >lgl/:llS
;tic plCSClll l/(l!ll {hc ( Oll/l)Ult I
\t! lit)liZOlll:il :lI/d _t'llic:ll
>}lit hlolii/ii/_a -ign;ils ale {xc.cnl
[1{)ii1 Iht' cclllll3tl(t'I
Turning the Picture Back On
Picture aheadv on
I',c the kc}boctld ol nlousc
lhc piCtUlC rc:lplbcais iunnudi:tlcl).
I >c tilt' kcdx>:nd Ill Illtltlst' Ihc
plClUlC Iv>_li_[_c>:ilS i_ul lll_)['t' _l_l\"
lh:lll \\ht'n ill >Ltndl_\ ll!_lc
!'_t file kt'\lxl;tltt *111Illl>tl>c' "t hc
Ill:in tXllc'l/ in c'ili/c'l ¸ _l:uldb\ t_f
-tl_pCllcl 1/1()dr'
Chapter 6 33
The Menu System
FUNCTION
DISPLAY : ON
MENU ADJUST : 1
POWER SAVER : OFF
FILM MODE :ON
RGB ADJ. :1
SCREEN SAVER
RESET
SEL. 4k ADJ. _RETURN
This is the FUNCTION menu with the GRAY
LEVEL option highlighted,
NOTE: Repeated watching with the
gray level set to black may effect the
quality of your picture. To reduce the
effects of uneven phosphor aging, set
the gray level to 3 or 4.
If viewing with a 4:3 aspect ratio
for long periods of time, set side
gray level at 3 or 4.
FUNCTION
DISPLAY :ON
MENU ADJUST : 1
POWERSAVER : OFF
GRAYLEVEL : 3
:4ONi_
RGB3ADJ. : 1
SCREEN SAVER
RESET
€ SEL. 41_ADJ. _RETURN
This is the FUNCTION menu with the FILM
MODE option highlighted.
Setting the Gray Level for the Sides of the Screen
The GRAY LIqVI'I. lunction alh)',vs _r()_ t( ) S_'[ the gray level for the >,ides {if
Ihe screen where nothing is displayed (on Ih(" h'h and righl sides of tilt"
screen when it is set to 4:3 size). The ]excl can lie adjusted from 0 to 1"3.
Tim factoi T setting is 3 (clark gray).
/VOTE: Repeated watching with the gray level set to black may effect
the quality of your picture. To reduce the effects of uneven phosphor
aging, set the gray level to 3 or 4.
To adjust file gray level for tile sides of tile screen:
1. From tile main menu, highlight and select FUNCTION. The
FUNCTION menu is displayed.
2. l lighlight the GP,AY LEVEL option.
3. Use the • button to scroll through the levels.
,t. When tile desired gray level is highlighted, i)ress the • button to
return to tile FUNCTION menu r)ptions You can continue making
a(ljustments within the FUNCTION menu, press GO BACK to ]cturn to
the previous menu or press CLEAR to exit tile nlgnLi system.
Adjusting for Flickering with Film Mode
There is some anlotlFlt of flickering that OCC'LIFS if] :In ill]age v/heFt it is
trans[_erred from film to video
ON All images are displayed in film mode
OFF FHm mocle is off.
To turn FILM MODE ON:
1,
2.
3
From the main menu, highlight and select FUNCTION. The
FUNCTION menu is displayed.
Highlight tile FILNIMODE option
Use tile • button to scroll through tile" thlee moclcs until ON is
displa3 ed
Press tile I+uth}n I{} tt'tUltl t{> the' FI+NCIION menu (}ph(ms You
c_ua c{}ntmue nlaking :tcIiuslnR, n(s \', ithin tilt., F[ N{.7I'ION menu. R, turn
t(} the l'>re_ i(}cis niL'nil by ple>sillg G() I}ACK {}i press CI.t{AR [{} exit
the inc, nu system
34 Chapter 6
The Menu System
FUNCTION
DISPLAY : ON
MENU ADJUST : 1
POWER SAVER : OFF
GRAY LEVEL : 3
FILM MODE :: ON
:411_
sCREEN SAVER
RESET
SEL <lb ADJ. _RETURN
This is the FUNCTION menu with the RGB3
ADJ. option highlighted.
Adjusting the Monitor in RGB3 Input Mode
[l the picture is not stable it+ I/(;B3 inoclc., use tilt' R(;I+] AI)IUST ftJantrt +
to acljust it.
1From the + tll_iin mt, ntl, highlight and select OPTIONS+ The OPTIONS
menu is displayed.
2. Highlight tile RGB3 ADJUST option.
3. Use the bum)n to select tile desired adjusmmnt (1, 2 or 3). The
choices scroll as follows:
,i.
1 2 3 -j
When the desired number is selected, press the button to return to
the FUNCTION menu items. You can continue making adjustments
within the FUNCTION menu, press GO BACK to return to the
previous menu or press MENU or CLEAR to exit the menu system
Note: When AUTO PICTURE is on, switch it off and back on again
to return the display position to its original position.
FUNCTI ON
DISPLAY : ON
MENU ADJUST : 1
POWER SAVER : OFF
GRAY LEVEL : 3
FILM MODE :ON
RGB3 ADJ. : 1
RESET
SEL. 4_ ADJ. ['_]'_IRETURN
This is the FUNCTION menu with the SCREEN
SAVER option highlighted.
Setting PLE to LOCK is
recommended if you are displaying
stationary pictures.
Setting the SCREEN SAVER
The SCREEN SAVER option contains three features in one. These features
are cised principally for PC operation.
The PLE (Peak Luminance Enhancement) function sets the luminance
level to a fixed mode t() rednce the eft:eels of phosphor aging.
The ORBITER (Peak Luminance Enhancement) moves the image around
tl_e screen intermittently to reduce the effects of phosphor aging.
The INVERSE function works in RGB mode only. INVERSE inverts the
video signal, playing tile image in a negative format.
Setting the PLE
PI.E has two options:
,-\[;TO lciminance level (£Olltlas[) is nornla]
I.OCK dims pk'tlirc to rednce pi/osphor agulg
"Ihe t'a(.'tOl T setting is AI TO Setting the PLE option to LOCK dims tilL'
1)ictcirc - die contiast x\ilI be lo\_cr titan noliital
I'<>set the' PI.E Ic_cl t<)I.OCF.:
1 Frolll tilt" inclin tilt'tiLl, Iliglllighl :lnd select FIINCIION 'ihc
FUNCTION inenn iS displayed
2 tlighlight the, I)I.E option
3[ !Se tile button to select I.O('K
i Press tile I)tltton to ictnl0 to the FI:Nt]TI()IN illeiltl optiolls "lou
Ceil] contillue making adjustnlcnts x\ithm the F/:NOTION mc't]tl.
ICq!lln 1(> tilt. >prcvi(_ns InL'Iltl Ol pi'c'ss MEN( or CI.EAR to CXil Iltc"
Int'I1ll 5\ Slel//
Chapter 6 35
The Menu System
SCREEN SAVER
PLE : AUTO
:4ONk
INVERSE OFF
SEL. -4> ADJ. r_l_FJ RETURN
This is the SCREEN SAVER menu with the
ORBITER option highlighted.
Turning ORBITER on
The factory setting for ORBITER is OFF. To turn ORBITER ON:
1. From the main menu, highlight and select FUNCTION. The
FUNCTION menu is displayed.
2. Highlight the SCREEN SAVER option (the SCREEN SAVER menu is
displayed).
3. Highlight the ORBITER option.
4. Use the button to select ON.
5. Press the • button to return to the FUNCTION menu options. You
can continue making adjustments within the FUNCTION menu,
return to the previous menu or press MENU or CLEAR to exit the
menu system.
Setting the INVERSE
hNVERSE has three options:
ON - The picture is ahematively displayed as a positive and negative
image.
OFF - INWERSEis off.
WHITE - The screen turns white.
The factory setting is OFF. To change the INVERSE mode:
1. From the main menu, highlight and select FUNCTION. The
FUNCTION menu is displayed.
2. Highlight and select the SCREEN SAVER option.
3. Highlight the INVERSE option.
4. Use the • button to select your choice.
5. Press the button to return to the FUNCTION menu options. You
can continue making adiustments within the FUNCTION menu,
return to the previous menu or press MENU or CLEAR to exit the
menu system.
36 Chapter 6
The Menu System
RETURN
RESET Resetting to Default Values
The RESET functkm allowsyou to reset_ adiustmems to th_ factory
default settings. Caution: this will reset all adjustments you have
made in all menus, including autotuning configuration settings.
To reset to the factory dethult settings:
1. From the main menu, highlight and select EUNCTION. The
FUNCTION menu is displayed.
2. Highlight the RESET function and press OK.
3. The RESET screen is displayed.
4. [Jse the • or • button to highlight the RESET option and press OK
or MENU. The RESET screen will display the message NOW
RESETTING. When the settings are restored to the factory default
you are returned to the RESET screen.
When you are done, press GO BACK to return to the FUNCTION menu
or pres CLEAR to exit the menu system.
These are the RESET screens. Choose the
RESEToption if you want to reset ALL
options in a_ menus back to the factory
default.
Chapter 6 37
The Menu System
The Options menu
Setting the Audio Inputs
The monitor's audio sources are programmable to the each of the monitor's video sources. For
example, you can program AUDIO1 source to work with the RGB2 video source.
This feature is generally used only for commercial applications.
This is the OPTIONS menu with the AUDIO/
input option highlighted.
HD SELECT : 1080A
PICTURE SIZE : ON
#SEL _1_ADJ. _RETURN
This is the OPTIONS menu with the BNC
SELECT option highlighted.
1. From the main menu, highlight and select OPTIONS. The OPTIONS
menu is displayed.
2. Highlight the one of the audio input options.
3. Use the • button to scroll through the available video sources. The
modes scroll as follows:
FVIDEO1 _VIDEO2 _ VIDEO3 _CMPNT1 _RGB1 _ROB2 _RGB3
4. When the desired mode is selected, press the • button to return to
the OPTIONS menu items. You can continue making adjustments
within the OPTION menu, press GO BACK to return to the previous
menu or press MENU or CLEAR to exit the menu system.
The factory defaults are as [bllows:
AUDIO1 - VIDEO1
AUDIO 2- CMPNT1
• AUDIO3- RGB1
If you use the reset option in the FUNCTION menu, the settings will
return to the factory default settings listed above.
Setting the BNC Connectors
If tile component you are connecting to the monitor doesn't have
composite video jacks, you can set the BNC inputs to act as component
video inputs.
1. From the main menu. highlight and select OPTIONS. The OPTIONS
menu is displayed.
2. Highlight the BNC SELECT option.
3. Use the button to toggle between RGB2 (composite) and
CMPNT2. (component).
4. Once you've selected the desired setting, press the • button to
return to the OPTIONS menu items or press CLEAR to return to the
main menu.
38 Chapter 6
The Menu System
Setting a Computer Image to the Correct RGB
Select Mode
Tile RGB SELECT function alk)ws you to select the correct viewing mode
ik)r the type of con_puter image you are displaying
The RGB SELECT function has six modes:
AUTO - Automatically selects the most suitable mode fk_rdisplaying tile
input signal.
STILL Use this mode to display VESA standard signals (still image from a
computer).
MOTION - Use this mode for moving images from a computer. Converts
the signal to RGB signal for best viewing.
WIDE1- Prevents horizontal compression when the input signal is 852 dot
X 480 line signal with a horizontal frequency of 31.7kHz.
WIDE2 - Prevents horizontal compression when the input signal is 848
dot X 480 line signal with a horizontal frequency of 31.0kHz.
I)TV -This mode is primarily used to optimize picture quality if you are
using a generic brand I)TV receiver which outputs signal at 4g0P
(progressive scan) lines.
OPTIONS
AUDIO INPUT
AUDIO1 : VIDEO1
AUDIO2 :" CMPNT1
AUDIO3 : RGB1
BNC SELECT : RGB2
:4AUTOI_
HD SELECT : 1080A
PICTURE SIZE : ON
SEL. 4_ ADJ. r_I_RETURN
This is the OPTIONS menu with the RGB
SELECT option highlighted.
To change the RGB SELECT mode:
1.
2.
3.
From the main menu, highlight and select the OPTIONS menu. The
OPTIONS menu is displayed.
Highlight the RGB SELECT optkm.
Use the • button to scroll through the mode choices. The settings
switch as follows:
_-_AUTO _" STILL _- MOTION "--_WIDEI"_" WIDE2 -_ DTV
When the desired mode is selected, press the ._ button to return to
the OPTIONS menu items. You can continue making adjustments
wiflfin the OPTIONS menu. press GO BACK to return to the previous
menu or press ('.LEAI_. to exit the menu system
Chapter 6 39
The Menu System
Setting the Monitor to the correct HD Receiver Mode
The HD SELECT _nction allows y_m to select tt_e correct mode _)r the monitor to work with your
HI) receiver. The default setting is 1080A. This is the correct setting 12)rall RCA and PROSCAN HD
receivers. If you have another brand of HD receiver, your picture may appear broken or off-center.
If so, you need to switch HD SELECT modes.
1080A - Use this option for RCA or PROSCAN HD receivers.
1080B - Use this option if you have any other brand of HD receiver.
To change the receiver mode:
1. From the main menu, highlight and select OPTIONS. The OPTIONS menu is displayed.
2,
3.
4.
Highlight the HD SELECT option.
Use the II_button to select the desired mode (1080 A or 1080 B).
When the desired number is selected, press the _ button to return to
the OPTIONS menu items. You can continue making adjustments
within the OPTIONS menu, press GO BACK to return to the previous
menu or press MENU or CLEAR to exit the menu system.
This is the OPTIONS menu with the HD
SELECToption highlighted.
BNC SELECT RGB2
RGB SELECT : RGB -
HD SELECT : lO_A
_"g_t_,_l :_ON,
SEL. <> ADJ. [_r_i_RETURN
This is the OPTIONS menu with the PICTURE
SIZE option highlighted.
Setting the Picture Size for RGB Input
The PICTURE SIZE option is used to adjust the picture size when the
input signal is RGB. Use this feature for graphic arts and checking
photos. In TRUE mode, there is no distortion of the picture. In NORMAL
mode, the picture will be scaled vertically but will keep the correct
aspect ratio.
ON -When the picture size option is on and in NORMAL mode, the
picture is scaled to fill the screen vertically while horizontally keeping the
correct aspect ratio. In FULL mode, the horizontal will be scaled to fit the
screen.
OFF - When the picture size option is off, TRUE mode displays the
picture pixel-R)>pixel, exactly the size of the image. If FULL mode, the
image is scaled to fit the screen.
Note: When using a DTCIO0 HD receiver, the only available mode is
FULL. The picture will be scaled to fill the screen,
40 Chapter 6
The Menu System
The Setup Menu
The SETUP nlenl.i controls the way your monitor communicates.
Confirming the Frequencies, Polarities, Mode and Resolution of
Input Signals
The FREQUENCY function is used to confirm the frequencies, polarities, mode and resolution of
the signals coming from a computer.
To confirm frequencies, polarities, mode and resolution:
1. From the main menu, highlight and select the SETUP option. The
SETUP menu is displayed.
2. Highlight the FREQUENCY option and press OK.
3. The FREQUENCY screen is displayed.
Press GO BACK to return to the SETUP menu, or press CLEAR to exit
the menu system.
This is the SETUP menu with the FREQUENCY
option highlighted.
H. POLARITY : NEG.
V= POLARITY : NEG.
MODE : 8
RESOLUTION : 640 X 480
r'_J_l RETURN
This is the FREQUENCY screen.
Chapter 6 41
The Menu System
Selecting the Language for the Menus
The menu display can he set to one of three languages: English, French or Spanish. The detkmlt is
English. To change the delimit setting:
MENU LANGUAGE
This is the MENU LANGUAGE screen with
Spanish as the selected language.
1. From the main menu, highlight and select the SETUP option. The
SETUP menu is displayed.
2. Highlight the MENU LANGUAGE option. The MENU LANGUAGE
screen is displayed.
3. Use the • button to scroll through the language choices. The
settings switch as follows:
F .(;AIS ESPA OL
4. When the desired language is highlighted, press GO BACK to return
to the SETUP menu. You can continue making adjustments within
the SETUP menu, press GO BACK to return to the main menu, or
press CLEAR to exit the menu system.
Setting the Video Signal Format
The COLOR SYSTEM option is used to set the video signal format.
Different countries used different formats l;:)r video signals. The AUTO
option automatically detects the correct video signal and sets the correct
format. This setting should not be changed.
42 Chapter 6
The Menu System
The Autotuning Menu
Autotuning the Component buttons on the Remote Control
The AUTOTUNING feature lets you easily program the component buttons on the remote to operate
the components hooked up to the monitor. 12) autotune your components to the buttons on the
remote:
This is the AUTOTUNING SETUP menu with
the DVD BUTTON option highlighted.
1.
2.
.
4,
From the main menu. highlight and select the AUTOTUNING SETUP
option. The AUTOTUNING SETUP menu is displayed.
Highlight an option which corresponds to a component which
you've connected. For example, if you have a DVD player
connected, highlight the DVD BUTTON option.
Use the _. button to scroll tl_rough the output choices. Select the
choice which corresponds to the jacks you used to connect the DVD
player. In the example illustration on the right, the DVD button on
the remote will operate the component connected to the CMPNT1
jacks (the DVD player).
When the desired option is displayed, press the • button to return
to the AUTOTUNING menu options. You can continue making
adjustments within the OPTIONS menu, press GO BACK to return to
the previous menu or press CLEAR to exit the menu system.
Chapter 6 43
The Menu System
Sleep Timer
The sleep timer is a feature that allows yoll to set tile monitor to turn off after a prescribed amount
of time. It can be set to turn tile power off after 30, 60, 90 or 120 minutes.
Setting the Sleep Timer
1.Press the SLEEP button on the remote to turn on the timer. Tile default is 30 minutes.
2. Press tile SLEEP button again to move to the next time increment. Press the SLEEP button
until you get to the desired time.
_30_ 60_90_120-_0_
3.The timer starts when the Sleep display disappears from the screen.
To check the Remaining Time:
1.Once the sleep timer has been set and tile menu has turned off, press the SLEEP button
once.
2. The remaining time is displayed, then disappears after a few seconds.
3. When five minutes remain, the remaining time appears until it reaches zero.
Cancelling the Sleep Timer
1. Press the SLEEP button twice in a row.
2.The sleep timer is canceled.
NOTE: After the power is turned off"with the sleep timer, a slight current is still supplied
to the monitor. If you do not plan to use the system for a long period of time, turn the
power off with the remote or on the unit.
44 Chapter6
R HAPTER 3
Other Information
Chapter Overview:
Installation
Connecting Your PC or Macintosh
Computer
• Specifications
• Troubleshooting
The Menu System
• Supported Resolution
• Limited Warranty
• Accessory Information
Other Information
Installing the Cinema Screen Monitor
IMPORTANT
This device cannot stand on its own. Be sure to use a stand or original mounting unit.
For correct installation and mounting it is strongly recommended to use a trained, authorized Cinema Screen
dealer.
Failure to follow correct mounting procedures could result in damage to the equipment or injury to the installer.
Product warranty does not cover damage caused by improper installation.
Attaching optional mounts or stand to the Cinema Screen monitor
The Cinema Screen monitor can be mounted on tile wall using an optional wall mount or you can attach a floor stand (also
optional). For more information on mounting your Cinema Screen Display, see your Cinema Screen dealer.
If you choose to use the optional wall mount, it can be attached to the Cinema Screen monitor in one of the l_)llowing two
ways:
While it is upright.
While it is laying with the screen face down. If you choose this option, lay the protective sheet that came wrapped
around the monitor beneath the screen surface so it doesn't get scratched.
Ventilation requirements for enclosure mounting
To allow heat to disperse, leave space between surrounding objects as shown on the diagram helow when installing.
50mm (2")--* 1"--
, t
I
i 50mm(2", 1
1240mm (48.8") ' /
--.-
E
E
E
E
0
L¢3
50mm (2")
46 Chapter 7
Other Information
Connecting Your PC Or Macintosh
Computer
Connecting your PC or Macintosh computer to your
Cinema Screen monitor will enable you to display
computer images on the monitor. The Cinema Screen
monitor supports the signals descrihed on page 48.
To connect to a PC, Macintosh or compatible graphics
adapter:
1. Turn off the power to your monitor and computer.
2. If your PC does not support XGA/SVGA/VGA you will
need to install an XGA!SVGA/VGA graphics board.
Consult your computer's owner's manual for your SXGA/
XGA! SVGA/VGA configuration. If you need to install a
new board, see the manual that comes with your new
graphics board for installation instructions.
3. The Cinema Screen monitor provides signal
compatibility with VESA 128021024@60MHz (SXGA).
However, we recommend not using this resolution due to
image readability on the monitor's 853 X 480 native pixel
resolution panel.
4. Use the signal cable that's supplied to connect your
PC or Macintosh computer to the Cinema Screen monitor.
For Macintosh. you will need a monitor adapter (not
supplied) to connect to your computer's video port.
5. Turn on the monitor and the computer.
6. If the Cinema Screen monitor goes blank after a
period of inactivity, it may be caused by a screen saver
installed on the computer you've connected to the
monitor.
When using a Macintosh with the Cinema Scteen
monitor, tile following three display standards arc
supported using tile included Macintosh adapter : 13" fixed
mode, 16" fixed mode. and 19" fixed nlode. The 13" fixed
mode is recommended for the Cinenla Screen 111onitor.
Mini D-sub 15 Pin VGA Signal
Composition
Pin No. Signal to be connected
1 RED
2 GREEN or sync. on Green
3 BLUE
4 No connection
5 GND
6 RED (GND)
7 GREEN (GND)
8 BLUE (GND)
9 No connection
10 SYNC (GND)
11 No connection
12 SDA
13 H. Sync
14 V. sync
15 SCL
Chapter 7 47
Other Information
Specifications
ProductName
ScreenSize
AspectRatio
Resolution
ColorReproduction
InputSignals
RGBinput terminals
RGB1
RGB2
RGB3
VideoInputterminals
Video1
Video2
Video3
DVD/HD/DTV
Audio
ExternalControl
SoundOutput
PowerSupply
CurrentRating
PowerConsumptiOn
Dimensions(WxDxD)
PHD50300CinemaScreenMonitor
43.5"(H)X24.5"(V)inches
1106(H)X 622(V)mm
diagonal50"
16:9
1365(H)X768(V)pixels
256levels,16,770,000colors
RGB,NTSC(3.584.43),PAL(B,G,M,N),
PAL60,SECAM,HD.1,DVD.1,DTV*
NetWeight
EnvironmentalConsiderations
Operatingtemperature
Humidity
Altitude
Storagetemperature
Humidity
FrontPanelUserControls
OtherFeatures
Accessories
Regulations
mini D-sub 15-pin
BNC(R, G, B, H/CS,V) Xl
DVt-I2g-pinX 1"2
RCA-pinX1
BNCX1
S-Video:DIN4-pinX1
RCA-pin(Y,P,[C=!,P,[C,])
StereoRCAX3
D-sub9-pinX1(RS-232C).
7W+7Wat6ohm
AC120V50/60Hz
5.9A(maximum)
595W(typical)
1240X766X107ram(w/ostand)
48.8X30.2X4.2inches(w/ostand)
1240X826X400ram(withstand)
46Kg/101.3Ibs.(w/ostand)
O°Cto 35°C/32°Fto 95°F
20 to 80%
0 to 1900m/0to 6239 ft.
-10°C to 5g°c/14°F to 122°F
10to90%
Poweron/oft, Input sourceselect
Volumeup/down/OSDcontrol
Power Management,plug and play (DDCl,
DDC2b, RGB3:ODC2bonly)
Remote control with two AA batteries, RGB
cable (Mini D-sub 15 pin to Mini D-sub 15-pin
connector), power cord, safety metal fitting,
strew for safety metal fitting, User's Manual
ULapproved (UL 1950, CSA950)
DOCCanadarequirements
MeetsFCCclass B requirementsfor home
application
I89"
..... """'-'........ _ H-t231"
435"
l
Thefeaturesandspecificationsmaybesubjectto change
withoutnotice.
* HD/DVD/DTVinputsignalssupportedonthissystem
480P (60 Hz) 4801 (60 Hz)
525P (60 Hz) 5251 (60 Hz)
625P (60 Hz) 6251(60 Hz)
720P (60 Hz) 7201(60 Hz)
10801(60 Hz)
48 Chapter 7
Other Information
Troubleshooting
Before requesting service, check the adjustments, operations, etc.
Symptom Possible Problem Solutions
Pictureis disturbed. Isa connectedcomponentsetdirectlyinfront Leavesomespacebetweenthedisplayand
Soundis noisy, orat the sideof themonitor? connectedcomponents.
Remotecontrolunit operateserroneously.
Theremotecontroldoesnotwork. • Remotecontrolbatteriesmaybedead. • Replacebothbatterieswith newones.
• Remotemaybein wrongmode. • Presscomponentbuttonfor desiredcomponent.
Monitor'spowerdoesnotturn onwhenthe Is the monitor'spowercordpluggedintoa Plugthe monitor'spowercord intoa power
remotecontrol'spowerbuttonis pressed, poweroutlet? outlet.
Monitordoesnot operatewhentheremote
control'sbuttonsarepressed.
Nosoundor pictureis produced.
Pictureappears but no sound is produced.
Tintis pooror colorsareweak.
Nothingappearsonscreen.
Areallthe monitor'sindicatorsoff?
; • Isthe remotecontrolpointedat themonitor,
or is thereanobstaclebetweenthe remote
controlandthe monitor?
Pressthepowerbuttononthe monitorto turn
onthe power.
Pointthe remotecontrolat the monitor's
remotecontrolsensorwhenpressingbuttons,
or removethe obstacle.
Is direct sunlight or strong artificial light Eliminate the light by closing curtains, pointing
shining on the monitor's remote control the light in a different direction, etc.
sensor?
Remotecontrol batteries may be dead.
Isthe monitor'spowercordpluggedintoa
poweroutlet?
Isthe sourcevideoconnectedandon?
Is thevolumesetat theminimum?
Isthe mutemodeset?
Arethe speakersproperlyconnected?
Arethe tint andcolorsproperlyadjusted?
ts the computer's powerturned on?
Is a video source connected?
,_Is the power manager function in the
STANDBYor OFFmode?
Is the picture position adjusted correctly?
• Replacebothbatterieswithnewones.
Plugthe monitor'spowercord intoapower
outlet.
I
• Makesuresourcevideo(VCR,DVD,DTC)is
connectedandturnedon.
• increasethevolume.
Pressthe remotecontrol'smutebutton.
Connectthe speakerspropedy.
Adjustthetint andcolor(underPICTURE).
Returnto factoryreset.
• Turnonthecomputer'spower.
Connectvideosourceto the monitor.
Operatethe computer(movethemouse,etc.).
Part of picture is cut off or picture is Adjust the picture from the SCREENmenu.
not centered.
Image is too large or too small. Is the screensize adjustedcorrectly?
Picture is unstable. Is the computer set at the correct resolution?
I"Is the HD receiverset to the correct mode?
Pressthe WIDE/AUTOWIDE button on the
remote control and adjust properly.
Setto the proper resolution.
Set HD receiver to the correct mode (page 29).
Chapter 7 49
Other Information
The Monitor Menu System
Main menu Sub menu
PICTURE QUALITY CONTRAST
BLACK LEVEL
SHARPNESS
COLOR
TINT
PRESETS
COLOR TEMP.
NOISE REDUCE
Main menu Sub menu
AUDIO BASS
TREBLE
BALANCE
Main menu Sub menu
SCREEN V-POSmON
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
Main menu Sub menu
FUNCTION DISPLAY
MENU ADJUST
POWER SAVER
GRAY LEVEL
FILM MODE
RGB3 ADJUST
SCREEN SAVER
RESET
Functions
Adjusts the contrast.
Adiusts the brightness.
Adjusts the sharpness.
Adjusts the color density (video input only).
Adjusts the picture tint (video input only).
Sets the picture mode according to the video environment.
Adjusts the color temperature and white balance,
Reduces noise visible in image,
Functions
Sets the bass.
Sets the treble.
Sets the left/right balance.
Functions
Adjusts the vertical picture position of the picture on the screen.
Adjusts the horizontal picture position of the picture on the screen.
Adjusts the vertical size of the picure.
Adjusts the horizontal size of the picure.
When turned on, automatically adjusts for flickering and striped patterns.
Adjusts for flickering in the picture.
Adjusts for striped patterns in the picture.
Functions
Turns the on-screen display on and off.
Adjusts the vertical and horizontal position of the menu display.
Sets the monitor for use as an energy-saving display when used with a computer.
When viewing a picture with 4:3 aspect ratio, sets the luminance of both sides of
the picture.
When turned to AUTO, selects the correct viewing format.
Adjusts the display position in RGB3 input.
Used principally for PCoperation.
PLEsets the luminance level to a fixed mode to reduce the effects of
phosphor aging.
ORBITER moves the image around the screen intermittantly to reduce the
effects of phosphor aging.
INVERSE works in RGB mode only. Inverts the video signal, playing the image
in anegative format.
Resets ALL the settings to the factory default values.
50 Chapter 7
Other Information
Main menu Sub menu Functions
OPTIONS AUDIO INPUT Allocates audio connectors.
BNC SELECT Sets BNC connectors to either composite or component video_
RGB SELECT Sets the appropriate mode for the computer image.
RGB (VGA signals), VIDEO (Moving picture), WIDE (WIDE VGA) DTV.
Sets correct mode for your HD digital receiver (1080 A or 1080 B).
Sets the picture size for RGB input.
HD SELECT
PICTURE SIZE
Main menu Sub menu
SETUP FREQUENCY
MENU LANGUAGE
COLOR SYSTEM
Functions
Confirms the frequency and synchronizing polarities of the signal currently
being inputted.
Sets the language of the menus (English, French, or Spanish)
Sets the VIDEO format. Keep this set to AUTO.
Main menu
AUTOTUNING SETUP
Sub menu
HD RCVR BTN
AUX BUTFON
VCR1 BUTTON
DVD BUTTON
Functions
Autotunes the HD RCVR button on the remote control to the input that
your HD receiver is hooked up to.
Autotunes the SAT2 button on the remote control to the input that your
satellite receiver is hooked up to.
Autotunes the VCR button on the remote control to the input that your
VCR is hooked up to.
Autotunes the DVD button on the remote control to the input that your
DVD player is hooked up to.
Chapter 7 51
Other Information
Supported Resolution
When screen mode is NORMAL, each signal is converted to 640 dot X 480 line signal (except for *3).
When screen mode is FULL, each signal is converted to 853 dot X 480 line signal (except for *2).
Notes:
With Digital inputs some signals are not accepted.
The sync may not be disturbed when non-standard signals other than the previously mentioned are input.
When connecting a composite sync signal, use the HD terminal.
Vertical Horizontal Sync Polarity Presence
Model Dots X lines frequency frequency Horizontal Vertical Horizontal Vertical
(Hz) (kHz)
640 X 400 70.1 31.5 NEG NEG YES YES
640 X 480 59.9 31.5 NEG NEG YES YES
72.8 37.9 NEG NEG YES YES
75.0 37.5 NEG NEG YES YES
85.0 43.3 NEG NEG YES YES
100.4 51.1 NEG NEG YES YES
120.4 61.3 NEG NEG YES YES
840 X 460 60.0 31.0 POS POS YES YES
852 X 480"t 60.0 31.7 NEG NEG YES YES
800 X 600 56.3 35.2 POS POS YES YES
60.3 37.9 POS POS YES YES
72.2 48.1 POS PO8 YES YES
75.0 46.9 POS POS YES YES
85.1 53.7 POS POS YES YES
*IBMPC/AT 998 63.0 POS POS YES YES
¢ompaSble 120.0 75.7 POS POS YES YES
computers 1024X 768 600 48.4 NEG NEG YES YES
70.1 56.5 NEG NEG YES YES
75.0 60.0 POS POS YES YES
85.0 68.7 POS POS YES YES
100,6 80.5 NEG NEG YES YES
1152X 864 75.0 67.5 POS POS YES YES
1280X 768 56.2 45.1 POS POS YES YES
1360X 765 80.0 47.7 POS POS YES YES
1376X 768 59.9 48.3 NEG POS YES YES
1280 X 1024 60.0 64.0 POS POS YES YES
75.0 80.0 POS POS YES YES
85.0 911 POS POS YES YES
1600X 1200 60.Q 75.0 POS POS YES YES
65.0 81.3 POS POS YES YES
70.0 675 POS POS YES YES
75.0 93.8 POS POS YES YES
640 X 490 667 35.0 Syncon G Syncon G ....
*Apple 832 X 624 746 49.7 Syncon G Syncon G ....
Macintosh*_ 1024X 768 74.9 602 Sgnc on G Syncon G - - -
r152X 870 75.1 68.7 Syncon G Syncon G ....
Work Station 1280X 1024 60.0 646 NEG NEG YES YES
(EWS4800) 71.2 75.1 NEG NEG YES YES
Work Station !280 × 1024 72 O 78.1 .......
(HPI - _ _
1152X 900 560 61.8 CSync C Sync - -
760 711 C Sync C Sync - - -
1280X 1024 761 811 C Sync C Sync ....
1024X 768 60.0 497 .....
1280X 1024 60.0 639 .......
NEG NEG YES YES
NEG NEG YES YES
WorkStation
(SUN)
Work Station
(SGI)
IDC-30OOG
PAL625P
NTSC525P
768 X 576 50.0 314
640 X 480 599 315
Screenmode
NORMAL TRUE
(4:3)
YES"2 YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES*a --
yES*a -_
YES*3 __
YES*a -_
YES'a -_
YES - -
YES - -
YES - -
YES --
YES*" --
YES.4 --
yES*4 --
YES --
YES --
YES - -
YES --
YES YES
YES YES
YES*3 __
YES - -
YES" - -
YES*' - -
YES*_ _ _
YES
YES --
YES,4
YES'3 - _
YES*4 - _
YES.7
YES*_ _ _
RGB
FULL select"_
(16:9)
YES - -
YES STILL
YES --
YES STILL
YES --
YES --
YES --
YES WIDE2
YES WIDE1
YES STILL
YES STILL
YES --
YES --
YES --
YES --
YES --
YES STILL
YES --
YES STILL
YES --
YES --
YES STILL
YES WIDE/
YES*a WIDE1
YES WIDE2
YES STILL
YES --
YES --
YES --
YES - -
YES --
YES --
YES --
YES --
YES
YES --
YES - -
YES - -
YES - -
YES --
YES --
YES
YES --
YES --
YES'r __
YES'7 MOTION
52 Chapter 7
Other Information
"1 Only when using a gra phic accderator I×mrd that is capable o[ displaying 848 X 48/).
_2 Aspect ratio is 5:4. "Ilfis signal is converted to a 6('_ X 4_0 line signal.
'3 The picture is displayed in the original resolution.
"4 The aspect raliois 5:4. This signal is converted _o a 91XI dot X t_ ¸ 70_ line signal.
'5 Normally the RGB SELECr mode is set automatically. If the picttlre is not displayed properly, s_'t tht_ m_×lc Iol the input signals lislcd in the talkie
"6 To connect the monitl_r to a Macintosh comptJtcl; u_e a D_sub 15-pin inoni_or adaptor with your computer's video l×_rt If your coll_l;,tlter ha_, a l)-sub
15_pin connector, use :in RGB cable¸
_7 Other Screen modes are also available.
N'O fc$;
When the input signals comply with the resolution listed in the tid)le alx_ve, tilt: position and size of the picturemay need to I_e adjusted
When a 1280 X 1024 line signal or a 1600 dot X 1200 line signal is input, the picture will be compressed
This monitor has a resolution of 1365 dot X 7bg line. It is recommended Ihat the input signal be XGA, wide XGA, or equivalent.
Some signals are not accepted with digital input
The synch may be disturbed when a nonstandard signal other than those previously mentioned is Jnpul.
If you are connecting a composite synch signal, use the HI) terminal
IBM is a registered trademark of lnmrnational Business Machines Corporation of the United States.
* Macintosh is a regisEered trademark of Apple Computer, Inc. of the United States.
Chapter 7 53
Other Information
'What your warranty covers:
Defects in materials or workmanship.
RCA Plasma Monitor
Limited Warranty
For how long after your purchase:
One year from date of purchase for labor.
One year from date of pumhase for parts.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm,
whichever comes first.
What we will do:
Pay an Authorized Service Center the labor charges to repair your unit.
Pay an Authorized Service Center for the new, or at our option, refurbished replacement parts required to repair your unit.
How you get service:
Call 1-800-433-8974 and have your unit's date of purchase and model/serial number ready.
A representative will troubleshoot your problem over the phone.
If the representative determines that you shoukl receive service, they will provide you with the name(s) of the Authorized
Service Center in your area.
Contact the Service Center and arrange for home or pick up, repair, and return service, provided that your unit is located
within the geographic territo W covered by an Authorized Service Center. If not, you must take your unit to the Service
Center location at your own expense, or pay for the cost the Service Center may charge to transport your unit to and from
your home.
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the
warranty" period must be presented to obtain warranty service. For rental firms, proof of first rental is also required.
What your warranty does not cover:
Customer instruction. (Your Owner's Manual describes how to install, adjust, and operate your unit. Any aclditi(mal
information should he obtained from your dealer.)
Installation and related adjustments.
Damage resulting from non-approved installation methods.
Sigrml reception problems not caused by your unit.
Dalnage froln misuse or neglect.
• Batteries.
A television that has been modified or incorporated into oilier products.
A unit purchased or sm_'iced outside tile LI.S.A.
Acts of nature, such as but not limited to lightning damage.
Product Registration:
Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you
should it ever be necessm T. The return of the card is not required for warranty coverage.
54 Chapter 7
Other Information
Limitation of Warranty:
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER
WARRANTIES, EXPRESS OR IMPLED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WR1TFEN INFORMATION
GIVEN BY THOMSON MULTIMEDIA INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR 1N ANY
WAY INCREASE THE SCOPE OF THIS WARRANTY.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY 1S THE EXCLUSIVE REMEDY OF THE
CONSUMER. THOMSON MULTIMEDIA INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY
ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How State Law relates to warranty:
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long
an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
If you purchased your unit outside the United States:
This warranty does not apply. Contact your dealer for warranty information.
Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs
of such service calls are the sole responsibility of the purchaser.
Chapter7 55
Accessories
The accessories listed below are available from },'our Cinema Screen Dealer. See your dealer for prices.
Attachable Speakers - SPK50
T
Monitor Stand - PLB50
56
Index
Symbols
1080A 39
1080|3 39
A
Antenna button 13
Arrow buttons 13
Audio input 38
Audio menu 29, 50
Automatic Code Search 16
Auto picture 31
Autotuning 43, 51
At.ix button 13
B
Balance 29
Bass 29
Batteries 9, 15
Bias 27
BNC select 38
Black level 26
C
CH+iCH- button 13
Cinema button 13
Clear button 13
CMPNT button 13
Color system 41
Components
Connecting 11
Computers
Connecting 11, 47
Contrast 26
Control Lock 8
D
Default values
resetting 37. 50
DVD hutton 13
DVD Player 10, 1I
[!XD.TI/:II control g
Extetoal Speakers 12, qq
Eihn mode 3L
Frequencies of Input SignaIs ql
l:tir/cti_);1 menu 32 -_0
G
Gain 27
Go back button 13
Gray level 3q
Guide button 13
H
ItD select 40
HD RCVR button 14
HI) Receiver
Connecting 9
HD receiver 9
HD Receiver Mode 40
1080A 40
1080B 40
lnfo button 13
In[)ut button 13
Input • Go Back v
Inserting batteries in the remote 15
hlstallation 46
Floor Stand 46
Speakers ,46
Ventikition requirements i6
Inverse 36
J
Jacks g. 11
AC IN g
External Speakers g. 55
External Control 8
Video iniAudk) in 8
I.anguage f)>rthe Menus i2
!.asel Disc Pla}er i0
M
)lacintosh c( ii//ptlt el
( Ollllectillg }7
3,1cnlory Mode 2q
>,lellti btlllOn lq
\letltl OK -
\lentl displa],
position 32
McP,tk>}stctn 23. +ll
Mini I)->uh Iq Pin VGA
Sign;t] ( ]OlllposlliOl/ i-
.\[odL' c>l lnptlt Sign:llx i l
MoniIOl [)tlnt}i] I t
Xlclhi ScleC'll ]_
\lute 22
N
Navigating the nit'ntis 23
Noise Reductkm 28
Nuinber buttons 14
O
OK button 14
On-Off button 14
On-screen Menus 23
Display position 32
Options menu 38, 31
Orbiter 36
P
Personal COlllptltef
connecting 10, 11, 47
Picture in picture 23
Picture Quality menu 25, 50
Picture mode
Bright 25
Memory 25
Nonltal 2-3
Preset 25
Soft 25
Picture lX)sRion 31, 32
PIP 23
PLE 34
Polarities of Input Signals 41
Power 22
Power cord o
Power Saver 33
Power, standby indicator 33
Progranlming the remote lq
Presets 28
R
ReducilCg noise in the picttue 28
Remote Control
:\t_tol_alic Cock' Sc:uch 16
I_utton_ 13.11
Codes 18
inscltil_g b:ttteric's I'_
Mute 22
Navigaling the Menus 23
P1_)_l;llllln_ll_Ie Codes l_
PiograI/inling t]_e I_et_l_te iO
Re_etting to ck:l-ndt xalucs 37
Resolutit)n _)l¸ Inp_lt Signals il
RGB Sck'ct 39
57
Index
S
Safety infl_rmation t, 2
Safety metal fitting 6
Screen Saver 35, +,0
Screen menu 30, +_(/
Screen size
Fill 30
Full 30
Normal _30
Stadium 31)
Setting the Color Temperature 27
Setup menu 41, 51
Sharpness 26
Sleep button 14
Sleep timer
Cancelling 44
Checking 44
Setting 44
Speakers 12, 55
Specifications 48
Stand
using with Cinema Screen diaplay 55
T
TREBLE 29
Troubleshooting 49
V
VCR 10
VCR1 button 14
VCR2 button 14
Ventilation Requirements 46
Video button 14
Video 39
Viexxing size
selecting 30
Vohnne 14, 22
\_l+- buttons Ii, 22
W
\XTaii a nh+ 54
Wide 39
Z
Zoo11/ 7, ]=1
Zt)oIII ii1 ZooIIt OLI{ htlH()I]S Ii
58

Navigation menu