RCA Direct View Digital 27 To 40 TV Manual L0311295

User Manual: RCA RCA Direct View Digital 27 to 40 TV Manual RCA Direct View Digital 27 to 40 TV Owner's Manual, RCA Direct View Digital 27 to 40 TV installation guides

Open the PDF directly: View PDF PDF.
Page Count: 32

DownloadRCA  Direct View Digital 27 To 40 TV Manual L0311295
Open PDF In BrowserView PDF
Television
User's Guide

Changing

TOCOM

Entertainment.

12A

ain.

Important

Information

insulation between hazardous mains voltage and user
his symbol indicates that this product incorporates double
accessible parts. When servicing use only identical
replacement parts.

[_l

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified

service personnel.

This
symbol indicates
important
instructions
accompanying
the
product,

_
_

This
symbol
voltage"
inside
product
that indicates
presents "dangerous
a risk of electric
shock
or the
personal injury.

Refer to the identification/rating

WARNING
To reduce the risk of fire or electric shock,
do not expose this product to rain or
moisture.
The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.

label located on the

back panel of your product for its proper operating
voltage.
FCC Regulations state that unauthorized changes or
modifications to this equipment may void the user's
authority to operate it.
Caution: Using video games or any external accessory
with fixed images for extended periods of time can
cause them to be permanently imprinted on the
picture tube (or projection IV picture tubes). ALSO,
some network/program
Iogos, phone numbers, etc.
may cause similar damage. This damage is not covered
by your warranty.
Cable IV Installer: This reminder is provided to call your
attention to Article 820-40 of the National Electrical
Code (Section 54 of the Canadian Electrical Code, Part
1) which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building as
close to the point of cable entry as practical.

Product

Registration

Please fill out the product registration card {packed separately) and return it immediately.
For U.S.
customers: Your RCA Consumer Electronics product may also be registered at www.rca.com/
productregistration.
Registering this product allows us to contact you if needed.
Product

Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach
and record the serial and model numbers. These numbers are located on the product.
Model No.

Dealer/Address/Phone:

Serial No.

Purchase Date:

it here

Table of Contents
Chapter

1" Connections

& Setup

Things to Consider Before You Connect .......................................................................
Protect Against Power Surges ...........................................................................
Protect Components from Overheating ...........................................................
Position Cables Properly to Avoid Audio Interference ....................................
Important Stand and Base Safety Information ................................................
Use Indirect Light ...............................................................................................
Cables Needed to Connect Components to Your TV .......................................
TV + DVD + VCR ..............................................................................................................

3
3
3
3
3
3
3
4

Using the VPORT Jack .....................................................................................................

5

Explanation of Jacks .......................................................................................................
The Front of Your TV ......................................................................................................

6
7

Front Input Jacks ................................................................................................
Front Panel Buttons ...........................................................................................

7
7

Plug in the TV ..................................................................................................................
Put batteries in the remote ...........................................................................................

7
7

How to Use the Remote Control to Complete the Initial Setup ................................ 8
Turn on the TV .................................................................................................................
8
Complete the Initial Setup .............................................................................................
Complete Auto Channel Search ........................................................................
Chapter

2: Using

the

Remote

8
8

Control

Button Descriptions for TV Mode ..................................................................................

9

Button Descriptions for BVB and VCR Modes .............................................................. 9
Using the INPUT Button ...................................................................................
10
Programming the Remote to Operate Other Components .......................................
Find Out If You Need to Program the Remote ...............................................
Programming the Remote ...............................................................................
How to Use the Remote After You've Programmed It ..................................
Remote Control Codes .................................................................................................
Chapter

10
10
10
12
12

3: Using the TV's Features

Channel Banner ............................................................................................................

14

Why You Should Use the Auto Tuning Feature ........................................................
How to Set Up the Auto Tuning Feature ........................................................

14
14

Parental Controls and V-Chip .....................................................................................
How V-Chip Works ...........................................................................................
USA V-Chip Rating System ...............................................................................
Canadian English V-Chip Rating System .........................................................
Canadian French V-Chip Rating System ..........................................................

15
16
16
16
17

Table of Contents
USA V-Chip TV Rating Limit .............................................................................
Blocking Specific Content Themes ..................................................................
Viewing Specific Content Themes ...................................................................
Blocking Canadian V-Chip Ratings ..................................................................
V-Chip Movie Rating Limit ...............................................................................
V-Chip Exempt Program Block .........................................................................
KidPass ..............................................................................................................
V-Chip Active ....................................................................................................
Front Panel Lock ...............................................................................................
Change Password .............................................................................................
Chapter

4: Using the TV's Menu

18
19
19
20
20
20
21
21
21
21

System

Sound Menu ..................................................................................................................

22

Picture Menu ................................................................................................................

22

Setup Menu ..................................................................................................................
Parental Control Menu ................................................................................................

23
24

Time Menu ....................................................................................................................

24

Chapter

5: Other

Information

Troubleshooting ............................................................................................................

25

Care and Cleaning ........................................................................................................

27

Limited Warranty .........................................................................................................

27

Things to Consider Before You Connect
Protect

Against

Power Surges

•

Connect all components

•

Turn off the IV and/or component

•

Make sure all antennas and cables are properly grounded.
packed separately.

Protect

Components

before you plug any of their power cords into the wall outlet.

from

before you connect or disconnect

Don't block ventilation
circulate freely.

•

Don't stack components.

•

If you place components

•

If you connect an audio receiver or amplifier,
flow around other components.
Cables

Safety Instructions

Overheating

•

Position

any cables.

Refer to the Important

holes on any of the components.

Arrange the components

so that air can

in a stand, make sure you allow adequate ventilation.

Properly

to Avoid

Audio

place it on the top shelf so the heated air from it won't

Interference

•

Insert each cable firmly

•

If you place components above the IV, route all cables down the side of the back of the IV instead
of straight down the middle of the IV.

•

If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin lead
cables away from audio/video cables.

Important

Stand

into the designated jack.

and Base Safety

Information

Choose the location for your IV carefully. Place the IV on a stand or base that is of adequate size and
strength to prevent the IV from being accidentally tipped over, pushed off, or pulled off. This could
cause personal injury and[or damage the IV. Refer to the Important Safety Instructions packed
separately.
Use Indirect

Light

Don't place the IV where sunlight
indirect lighting.
Cables

Needed

to Connect

or room lighting

Components

will be directed toward the screen. Use soft or

to Your TV

The pictures below show the cables needed for the connections

Coaxial cable

S-Video

Component

Chapter 1

cable

Audio/Video cables

video to VPORT cable

Graphics contained

represented in this book.

within

Component Video (Y, Pb,Pr) cables

Xbox to VPORT cable

this publication

are for representation

only.

3

Connections

Setup
TV (back panel)

VCR

_

VIDEO

IN FROM ANT

AUDIO

FromCable
orAntenna

DVD

* If you connect an S-Video cable, you must connect
the audio cables to the VIDEO 1 AUDIO jacks on the
back of the TV, no__tthe VIDEO 2 AUDIO jacks.

TV + DVD + VCR
1.

Connect your DVD Player to your TV.
A.

Connect the audio [white and red) cables to the VIDEO 2 R and L/MONO AUDIO jacks on the back
of the TV and to the Audio Output jacks on the DVD player.

B.

If your DVD player has Component

Output Jacks {Y, Pb, Pr), connect three video grade cables to

the Y, Pb, Pr jacks on the DVD player and to the VIDEO 2 Y, Pb, Pr jacks on the back of the TV. If
your DVD player doesn't have Y, Pb, Pr jacks, go to C.
-ORC.

If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD
player and to the S-VIDEO IN jack on the back of the TV. If your DVD player doesn't have an
S-Video jack, go to D.

Note: If you connect an S-Video cable,you must connect the audio cables to the VIDEO1AUDlOjacks on the back of the
TV,not the VIDEO2 AUDIOjacks.
-ORD.

2.

Connect a video cable [yellow) to the Video Output Jack on the DVD player and to the VIDEO 2
VIDEO jack on the back of the TV.

Connect your TV to your VCR
Connect a coaxial cable to the TV ANT jack on your TVand to the Output Jack on your VCR
[sometimes labeled OUT TO TV).
Note: If your VCRhas A/V output jacks, you can connect your lV to your VCRusing audio/video cables for better quality

3.

Make sure cable or antenna

is connected

to your VCR.

Connect the coaxial cable from your cable outlet or antenna to the antenna

input on the VCR.
Go to page 7

4

Graphics contained

within

this publication

are for representation

only.

Chapter 1

Connections

Setup

TV (back panel)
Xbox

DVD

10

VIDEO S-VIDEOINJ

FromCable,
CableBox,
or Antenna

Using the VPORT Jack
The VPORT jack lets you connect an Xbox TM video game system to the TV using an
Xbox to VPORT cable {not provided). Go to page 29 to purchase the Xbox to VPORT
cable. You can also connect a component, such as a DVD player, that has
component video jacks {Y, Pb, Pr) using a Component video to VPORT cable {not
provided). When using the Component video to VPORT cable, make sure to connect
the left and right audio cables to the component in order for the TV to receive
sound.
Note: TheVPORTjaekcannot be used for game consolesother than the Xbox videogame
system.
1.

Connect your TV to a DVD player
Use a Component

video to VPORT cable {not provided) to connect your TV to

another component,

such as a DVD player, that has Y, Pb, Pr jacks.

Connect the Component
of the TV.

Component video to
VPORT cable (not
supplied)

video to VPORT cable to the VPORT jack on the back

Connect the other ends of the Component video to VPORT cable to the
Y, Pb, Pr and the Audio Output Jacks on the back of the DVD.
-OR2.

Connect your TV to an Xbox video game system
Connect the end of an Xbox to VPORT cable {not provided) labeled Wto the
VPORTjack on the back of the TVand the other end to the corresponding jack
on the back of the Xbox video game system.

Xbox to VPORTcable
(not supplied)

Note:If you have an audio receiver,you might beable to connect a digital audio cable to the
digital audiojack that's on the VPORTeable.
Go to page 7
"Xbox is a trademark
countries."

Chapter 1

Graphics contained

within

of Microsoft

Corporation

this publication

in the United States and/or other

are for representation

only.

5

Connections
Explanation

Setup

of Jacks

This section describes the jacks you can use to make connections.
ways to connect components to your TV.
VPORT

There are several

Go to the previous page for VPORT explanation.

TV ANT Lets you connect a coaxial cable to receive the signal from the antenna,
cable, cable box, or if using the example on page 4, a VCR.
VIDEO 1
VIDEO, AUDIO R and L/MONO

R

.-_

L/MONO

AUDIO

component
•

VIDEO S-VIDEOIN

R {RIGHT) AUDIO

Provides right audio connection.

right audio connector
•

Lets you connect a

such as a VCR, DVD player, or laserdisc player.

L/MONO AUDIO

Provides left audio connection.

left audio connector
•

VIDEO
Provides composite
connector is usually yellow.

video connection.

•

S-VIDEO IN
Provides better picture quality than the
video jacks because the color part of the signal is
separated from the black and white part of the picture.
When using S-VIDEO IN, make sure to connect left and
right audio cables to the L/MONO and R AUDIO Input
jacks.

VIDEO, AUDIO R and L/MONO and Y, Pb, Pr
_,_

Pb

Y

connect a component

Lets you

Y, Pb,
video
grade
Y, Pb,
to the

Pr Provides optimum picture quality because the
is separated into three signals. Use three videocables for the connection. When using VIDEO 2
Pr, make sure to connect left and right audio cables
VIDEO 2 AUDIO Input jacks.

•

R {RIGHT) AUDIO, L/MONO and VIDEO

Their

is the same as VIDEO 1.

AUDIO OUTPUT Lets you connect an amplifier
receiver for improved sound quality.

Graphics contained

The video

video source, such as a DVD player.

•

description

6

The

is usually white.

VIDEO 2

RAUDIOI../MONO
VIDEO

Pr

The

is usually red.

within

this publication

are for representation

only.

or audio

Chapter 1

Connections

Setup

The Front of Your TV
Front

Input Jacks

The TV has front input jacks for your convenience: one set of
audio/video inputs and a headphone jack. These jacks are
towards the front of the TV on the side. To access the
component you connected to the front of the TV, press the
INPUT button on your remote until FRNTappears on the
screen. The jacks are ideal for connecting a video game
console or a eamcorder.
AUDIO
H-PHONE L/MONO R

Note: Whenconnecting a component that has only one audio jack,
such assome camcorders,use the TV'sAUDIOL/MONOjack to hear
the audio.

VIDEO

H-PHONE
Allows you to connect headphones to listen to
the sound coming from the TV.
L/MONO and RAUDIO
component

Receives audio from another

such as a VCR, eamcorder, or video game console.

VIDEO
Receives video from another component
VCR, eamcorder, or video game console.
Front

such as a

Panel Buttons

If you cannot locate your remote, you can use the front panel buttons
to operate many of the TV's features.
MENU

of your TV

Brings up the Main menu.

(3H v
Scans down through the current channel list. In the menu system, acts like
the down arrow button on the remote control and adjusts menu controls.
CH ^ Scans up through the channel list. In the menu system, acts like the up
arrow button on the remote control and adjusts menu controls.
VOL <

Decreases the volume. In the menu system, acts like the left arrow button

on the remote control and adjusts menu controls.
VOL > Increases the volume. In the menu system, acts like the right arrow button
on the remote control and adjusts menu controls.
POWER

Turns the TV on and off.

Plug in the TV
Plug the end of the power cord into a grounded
completely into the outlet.

wall outlet. Insert the plug

Put batteries in the remote
•

Remove the battery compartment cover from the back of the remote by
pushing down on and sliding off the cover.

•

Insert 2 "AAA" fresh batteries.
correctly.

•

Replace the cover.

Chapter 1

Make sure the polarities (+ and -) are aligned

Graphics contained

within

this publication

are for representation

only.

7

Connections

Setup
How to Use the Remote Control to Complete
the Initial Setup
The technical term is "Navigation"how you move through
the on-screen menus. The method is the same throughout
the menu screens: highlight your choice and select it.

Arrows

To highlight a menu item, press the arrow buttons on the
remote to highlight one of the items listed on the screen. Use
the up or down arrow button to move up or down. Use the
right or left arrow button to move right or left.
To select the item that you've highlighted,

OK
button

press OK.

Note: Highlighted means that the menu item stands out from other
menu items on the list (appearsdarker,t_righter,or a different color).

Turn on the TV
Press TV on the

remote,

or press POWER on the TV's front

panel.
Note: Pressing the TVt_utton not only turns on the TV,,t_ut puts the
remote into TVmode. "TVmode" means that the t_uttons on the
remote control operate the TV's functions.

Complete the Initial Setup
The menu system in your TV allows the TV's features to work
properly. The first time you turn on your TV, the SETUPscreen
appears with Language highlighted. The default language is
English. To choose another language, press the right arrow
button on the remote.

Complete

Auto

Channel

Search

This part of the setup allows the TV to search for all channels
viewable through your antenna or cable TV system. This is
sometimes called auto programming.
1.

Highlight

Auto Ch. Search and press OK.

2.

The Signal Type option is set to Cable. To change the
option to Antenna, press the right arrow button and then
press OK.

3.

Press the down arrow button to highlight Start. Press OK
to begin the auto channel search.

Once the search is complete, you can begin watching TV. For
information on customizing your channels or menu options,
go to Chapter 4.

8

Graphics contained

within

this publication

are for representation

only.

Chapter 1

Indicator

Button Descriptions for TV Mode
Arrows
controls.

Used to highlight

different

items in the TV menu and to adjust the menu

Indicator
Indicates the programming mode when programming the remote to
control components. Lights when you press a valid button on the remote. Flickers
when a button is pressed and the batteries are low.
{0-9) Number Buttons
Enter channel numbers and time settings directly
through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
digit.
CH + or CH Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing channels.
CLEAR
viewing.

Removes any menu or display from the screen and returns you to normal

GO BACK
INFO

Returns you to the previous channel.

Brings up the channel banner.

INPUT Toggles through
FRNT, VPORTand current
MENU

the available input sources (VID1/SVID1, VID2/CVID2,
channel).

Brings up the Main menu.

MUTE Reduces the TV's volume to its minimum
volume.
OK

level. Press again to restore the

When in the menu system, selects highlighted

ONeOFF

items.

When in TV mode, turns the TV on and off. If in another

DVD, etc.) and programmed,

will turn the component

mode (VCR,

on and off.

PRESETS Brings up sound and picture presets.
SKIP Press once before changing channels and the TV will wait 30 seconds before
returning to the original channel. Press repeatedly to add more time.
TV

Turns on the TV and puts the remote in TV mode. Also displays current status.

VPORT
Tunes the TV to the VPORT input channel. You can program this button
to control a VCR or DVD player. When programmed, changes the mode of the
remote when the button is pressed. To restore the VPORT button to factory default
mode (unprogrammed), press and hold VPORT, then press 1, O,O, and O.
VOL - or VOL +

Decreases or increases the TV's volume.

Button Descriptions for DVD and VCR Modes
AGAIN
ANTENNA

In DVD mode, replays the last several seconds of the title you're playing,
In VCR mode, functions

as a 1V/VCR button,

DVD Puts the remote in DVD mode and, if auto tuning
the 1V and tune to the correct video input channel,
GUIDE
Ifyou're operating another
accesses the on-screen Guide.

Chapter 2

Graphics contained

within

this publication

component

is enabled, will turn on

that has a guide, thisbutton

are for representation

only.

9

Osin9 the Remote
OPEN.CLOSE

Contro

In DVD mode, opens or closes the DVD disc tray.

REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides
transport control for some remote-controllable
VCRs or DVD players.
SEARCH
SPEED

In VCR mode, accesses Index Search feature.
In VCR mode, selects a recording speed.

VCR Puts the remote in VCR mode and, if auto tuning
Tvand tune to the correct video input channel.
ZOOM
Using

is enabled, will turn on the

In DVD mode, zooms in on the picture.
the

INPUT

Button

Use the INPUT button to scroll through the available video input channels and
view components you have connected to the TV.
1.

Make sure the component

2.

Press INPUT to tune to an available video input source and view the
component.

you want to view is turned

3.

To return to the previous channel, continue

ON,OFF
DVD and
VCR buttons

ON.

pressing INPUT.

Programming the Remote to Operate Other
Components
The universal remote can be programmed to operate most
brands of remote controllable components. The remote is
already programmed to operate most RCA, GE, and Proscan
components.
Note: TheTVbutton can't be programmed on this remote.
Find

Out If You Need to Program

To determine whether

the

Remote

the universal remote needs to be

programmed for your component, turn the component ON.
For example, to program the remote for a VCR, turn on the
VCR. Point the remote at the VCR, and press the VCR button.
Then press ON-OFF or CH + (channel up) or CH (channel
down) to see if the VCR responds to the remote commands. If
the component does not respond, the remote needs to be
programmed.
i

VPORT
button

REVERSE
and PLAY
buttons

STOP
button

You'll use these buttons
programming

10

Programming

the

Remote

There are two ways to program the remote control:
•

automatic

•

direct entry

code search

when

the remote.

Graphics contained

within

this publication

are for representation

only.

Chapter 2

Osin 9 the Remote Control
UsingAutomatic Code Search
The following instructions can be used to program the remote to operate your
components. If you want to stop the automatic code search without programming
any of your components, press CLEARuntil the indicator on the remote turns off.
1.

Turn on the component

you want to operate (VCR or DVD player)

2.

Press and hold the component button you want to program (VCR, DVD, or
VPORT). While holding the component button, press and hold ONoOFF until the
indicator on the remote turns on, then release both buttons.

3.

Point the remote at the component. Press and release PLAY, then wait 5
seconds or until the indicator on the remote stops flashing.
At this point the remote is searching for the correct code to program. If, after 5
seconds, the component you want to operate does not turn off, press PLAY
again to tell the remote to search the next set of codes.
Continue pressing PLAY until the component turns off or you have searched
through all of the codes. There are 20 total sets of codes. If the component
does not turn off after pressing PLAY 20 times, then the remote can't be
programmed to operate that component.

If the component

you want to control does turn off:

1.

Press and release REVERSE,then wait 2 seconds. Repeat this step until the
component turns back ON.

2.

To finish, press and hold STOP until the indicator

on the remote turns off.

UsingDirect Entry
1.

Turn on the component

2.

Look up the brand and code number(s) for the component
this section.

to be programmed.

button

on the code list in

3.

Press and hold the component

4.

Enter the code from the remote control code list on the following pages. If the
indicator flashes, you have either entered an invalid code or the button isn't
programmable.

you want to program on the remote.

5.

Release the component

6.

Point the remote at the component. Press ONoOFFto see if the component
responds to the command. If it doesn't, try pressing the component button
then ONoOFF again.

button.
and

•

If you get no response, repeat these steps using the next code listed for your
brand, until the component responds to the remote commands.

•

If you try all the codes for your component brand and none work, try the
automatic code search method. If automatic code search doesn't find the code,
the remote is not compatible with your component.

Chapter

2

Graphics contained

within

this publication

are for representation

only.

11

Osin9 the Remote

Contro

How to Use the

You've

Remote

After

Programmed

It

Because this universal remote can operate several different components it uses
operational modes triggered by the component buttons. For example, if you want
the remote to operate the TV, you would press the TV button to put the remote
into TV mode before you could operate the TV.
I.

Press the appropriate component
to operate the component.

button

2.

Press ON-OFF to turn the component

3.

Use the remote buttons

(DVD, VCR, VPORT) to set the remote

ON or OFE

that apply to that component.

Notes.

The remote ma)/ not be compatible with all brands and models of components.
ma)/ not operate all functions of the remote that came with )/our component.

It also

If )/ou keep pressing buttons and nothing happens, the remote is probably in the
wrong mode. You must press the component button that matches the component
you want to operate (i.e., if )/ou want to operate the VCR, press VCR on the remote
control to put the remote in VCRmode.)

Remote Control Codes
VCR Codes
Programmable

for VCR and VPORT buttons.

Admiral
....................................................................................
Adventura
................................................................................
Aiko ..........................................................................................
Aiwa

.........................................................................................

Akai

.................

2003,

2004,

2005,

2007,

2132
2026
2027
2026

2008,

2111,

2112,

American
High ........................................................................
Asha .........................................................................................
Audio
Dynamics
...........................................................
Audiovox
.................................................................................
Bell

_t Howell

Beaumark

2009,

...........................................................................

.................................................................................

Broksonic
......................................................................
Calix .........................................................................................
Candle
.....................................................
.............................................................................

2013,

2012,

2021,

CCE ................................................................................
Citizen
...........................................................................
.............................................
2015, 2016, 2017,

2018,

2013,

...................................

2022,

Cybernex
Daewoo

2023,

2021, 2024,
2034,2035,

2025,
2036,

2040, 2041, 2042,2044,
2045,
2046,
2047, 2065, 2113, 2116, 2117, 2130

2021
2013

Fuji .................................................................................
Funai ........................................................................................
Garrard .....................................................................................

2048,

2049,

2050,

2051,

2052,

2118

2021,

2119
2026
2026

2011

GE .......................................................................
.............................................
2021, 2022,

2013

Goldstar

2025
2014

Gradiente
.................................................................................
Harley Davidson
.....................................................................

2026
2026

Harman
Harwood

2009
2061

...................................................

2053,
2009,

2000, 2001, 2013,
2115, 2120, 2131
2014,

2018,

Kardon
......................................................................
..................................................................................

2054

2114
2110
2062

Headquarter
..............................................................................
2011
Hitachi
.........................................................................
2055, 2056,
.........................................................
2057, 2107, 2111, 2120, 2122

2027,

2061

Hi-Q ..........................................................................................

2023

Instant Replay .........................................................................
JCL ............................................................................................

2021
2021

2013, 2014,
2019, 2027
2009
2061

2014, 2023, 2061
2000, 2009, 2013,

JC Penney ................................................
2009, 2010, 2011, 2013,
......................................................
2014, 2021, 2022, 2055, 2056,
........................................................
2058, 2059, 2060, 2107, 2118

2024,

2115,

2131

Jensen .................................................................
2055, 2056, 2111
JVC .......................................
2009, 2010, 2011, 2018, 2111, 2123

.................................................................................
.......... 2015, 2017, 2019, 2025, 2026,
2027,

2028,

2013
2110

Kenwood ....................
2009, 2010, 2011, 2016, 2018,
KLH ...........................................................................................
Kodak

2016,

2018,

2021,

Daytron
.....................................................................................
DBX ................................................................................
Dimensia
........................................................................

2009,
2000,

2110
2010
2131

Dynatech
..................................................................................
Electrohome
.................................................................

2014,

2026
2029

Electrophonic

12

2011,

2015,
2033,

Fisher

2010
2014

.............

2014,
2032,

2022,
2020,

Colortyme
................................................................................
Colt ...........................................................................................
Craig .........................................................
Curtis-Mathes
....................................................

.......... 2037, 2038, 2039,
............................................

2012,
2031,

2113

2014, 2015, 2016,
2017, 2018, 2019

Canon ..................................................................
Capehart
.........................................................................
Carver .......................................................................................

Emerson
.............................
.......... 2026, 2029, 2030,

..........................................................................

Graphics contained

within

2014

............................................................................

Lloyd ........................................................................................
Logik ........................................................................................
LXI ............................................................................................
Magnavox
........................................................
........................................................
2063,

this publication

are for representation

2104,

only.

2111, 2123
2061
2014,

2021
2026
2061
2014

2021, 2022, 2062,
2105, 2108, 2124

Chapter 2

Osin 9 the Remote Control
VCR Codes continued
Magnin
...................................................................................
Marantz
........ 2009, 2010, 2011, 2016, 2018, 2021,
Marta ......................................................................................

2062,

Masushita
..............................................................................
Mei .........................................................................................
Memorex

...... 2011,

2013,

2014,

2021,

2013
2064
2014

2023,

2021
2021
2026,

2104,

2132

MGA ..................................................................
2029,
MGN Technology
..................................................................
Midland
..................................................................................

2065,

2113
2013
2053

Minolta

2056,

.............................................................

2055,

2107

Mitsubishi
............ 2029,
2055, 2056, 2065,
2066, 2067, 2068,
...........
2069, 2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123
Montgomery
Ward ....................................................
Motorola
.....................................................................
MTC .............................................................................
Multiteeh
....................................
2013, 2016,

2026,

NEC ...............................................
2009, 2010,
............................................
2064, 2076, 2078,
Nikko ......................................................................................
Noblex

2132
2132

2013,
2053,

2126
2061

2011,2016,
2018,
2079, 2111, 2123
2014

....................................................................................

Olympus
Optimus
Optonica
Panasonie

2075,
2021,

2021
2014,

..........................................
2016, 2055, 2056,
Research
....................................................................

2107,

2120
2018

Philco
.....................................................
2021, 2022,
Philips
....................................................
2021, 2062,
Pilot ........................................................................................

2062,
2096,

2063
2124
2014

Pioneer

2080,

2081,

2123

Portland
..................................................
2016, 2017,
Proscan
.............................................................
2000,
Protee
.....................................................................................
Pulsar
.....................................................................................

2019,
2001,

2110
2131
2061
2104

Quarter
Quartz

........................................

2010,

2055,

2126,

....................................................................................
.....................................................................................

Quasar
...............................................................
RCA ......................
2000, 2001, 2003,
..................
.......................

2013,

2132
2096
2127

2011
2011

2021, 2022, 2125
2021, 2055, 2056,

2082, 2083,
2084, 2085, 2086,
2087, 2088, 2089,
2090,
2091, 2107, 2115, 2120, 2125, 2131, 2133

Radioshack/Realistic
............................
2011, 2013,
....................
2022,
2023, 2026, 2029, 2049,
2050,
Radix ......................................................................................

2014,
2096,

Randex
...................................................................................
Ricoh ......................................................................................
Runco

2021,

2085,
2021,

2111
2109

2026,
2013,

2100,
2024,

2129
2047

Toshiba
.......................
2015, 2049, 2051, 2055, 2065,
Totevsion
........................................................................
Uniteeh
.......................................................................................

2093,
2013,

2116
2014
2013

Vector
Victor

2015,

2016
2010

Research
........................................
2009,
.........................................................................................

2010,

Video Concepts
...............................
2009, 2010, 2015,
Videosonic
.................................................................................
Wards

........................................................

...........................................
....................................
XR-IO00
Yamaha
Zenith

2096,

2013,

2016,
2015,

2113
2013
2021,

2023, 2026, 2029,
2055, 2056, 2061,
2101, 2102, 2103, 2107, 2116, 2132

..............................................................
.............................................
2009,
...............................................

2014,

2004,

2010,
2098,

2021, 2026, 2061
2011, 2018, 2111
2104,

2119,

2128

DVD codes
Programmable
Aiwa

for DVD and VPORT buttons.

...........................................................................................

Apex ................................................................................
GE ...............................................................................................
Hitachi

.......................................................................................

JVC ..................................................................................
Konka ...............................................................................
Magnavox
Mitsubishi
Panasonie
Philips
Pioneer
Proscan

3009
3023,

3008
3002,
3011,

.................................................................................
..................................................................................
..................................................................................
.......................................................
3003,
3019,
.......................................................................................

3021,

3022
3005
3000

3000,

Samsung
....................................................................................
Sanyo
.........................................................................................
Sony .....................................................................
3006,
Toshiba
.................................................................
3007,
Zenith .........................................................................................

3010
3012
3003
3004
3013

......................................................................................

RCA .................................................................................

3024
3000

3001
3025
3014

3015,
3017,

3016
3020
3018

2021,
2132
2014
2014
2128

.....................................................................................

2104

Samsung
...........................
2005,
2013, 2015,
Sanky
...........................................................................

2033,

2053,
2104,

Sansui

2092,

2111, 2123

.....................................................

Teknika
...........................................
2014,
TMK ......................................................................

2026,

2013

.................................................................................
.......................................................................
................................................................................
.........................
2021, 2022, 2109, 2125,

Pentax
Pentex

TEAC .....................................................................
Technics
..........................................................................

2010,

2112
2132

Sanyo
................................................................
2011, 2013, 2023
Scott ............
2012, 2015, 2025, 2032, 2038,
2065, 2093, 2116
Sears ............................................
2011, 2014, 2021, 2023, 2048,
...............................

2049,

2050,

2051,

2055,

2056,

Sharp .....................
2017, 2029, 2094, 2095,
2096,
Shintom
.................................................
2004,
2056,
Shogun
...................................................................................
Signature

2107,
2097,
2061,

...............................................................................

2118
2132
2098
2013
2132

Singer ................................................................
Sony .......................................................
2004,
STS ...............................................................................

2021,
2098,

2061,
2099,
2021,

2128
2119
2107

Sylvania

2063,

2065,

2124

................

2021,

2022,

2026,

2062,

Symphonic
............................................................................
Tandy
......................................................................................
Tashiko
...................................................................................
Tatung

.....................................................................................

Chapter

2

2026
2011
2014
2111

Graphics contained within this publication are for representation

only.

13

Channel Banner
There are several items that might appear on-screen when
you press the IV or INFO button on the remote. This display is
called the Channel Banner. The following list describes the
items on the Channel Banner screen (left to right and top to
bottom).
SAP

Displayed when the current channel
is broadcasting SAP (Second Audio
Program) information.
Displayed when V-Chip has been
activated.

KidPass:
2:24

Displayed when KidPass is set and the
length of time remaining.

CC

Displayed when Closed Captioning
available on the current channel.

Stereoor Mono

Stereo displayed when the current
channel is broadcasting in stereo.

is

Mono displayed when the current
channel is broadcasting in mono.
Skip: 0:30

Corresponds to the SKIP button.
Shows the amount of time left before
the TV switches back to the previous
channel.

07:18 am

Displays the current time.

06ABCDEF

Displays the current channel and
label assigned to the channel.
Displayed when you mute the sound.

Why You Should Use the Auto Tuning Feature
The auto tuning feature tunes the IV to the correct channel for different
components you have connected to your IV {like a VCR, DVD player, etc.). When
you set up auto tuning in the menu system you don't have to remember to change
your IV to channel 3, for example, when you want to watch the tape in yourVCR.
How

to Set Up the Auto

Tuning

Feature

The way you set up the auto tuning feature in the Iv's menu corresponds to the
component buttons on the remote and the way you have each component
connected to your IV. When you set up auto tuning, you're telling the IV what
channel to tune to when you press the VCR or DVD button on the remote control.
1.

Press MENU (the MAIN MENU appears).

2.

Highlight

Setup and press OK on your remote control.

3.

Highlight

Auto Tuning and press OK.

14

Graphics contained

within

this publication

are for representation

only.

Chapter 3

Usin 9 the W°s Features
4. Choosewhich channel you want to set:
Set VCR1 Lets you set up the channel the TVtunes to when you pressthe VCR
button.
Set VCR2 Not available with your remote control.
Set SAT/CABLENot available with your remote control.
Set DVD Lets you set up the channel the TVtunes to when you pressthe DVD
button.
5. Pressthe right arrow button to select the choice that matchesthe way you
havethe component connected to this TV.
The choices and a brief explanation follow:
N/A Choosethis if you don't have this particular component
connected to the TV,or if you don't want the TVto
automatically tune to the correct channel when you're using
this component.
CH02(SAT/CABLE
only- Not available with your remote
control).
CH03or04 Component is connected to the TVANTjack on
the back of the TV,and you want the TVto tune to channel 3
or 4 when you pressthe corresponding button on the
remote. Reminder: makesure the component's Channel 3/4
switch is set to the appropriate channel.
VID1 Component is connected to the VIDEO 1 VIDEOor
S-VIDEOIN jack on the back of the TVand you want the TV
to tune to a video input channel when you pressthe
corresponding button.
VID2 Component is connected to the VIDEO2 VIDEOor
Y, Pb,Pr jacks on the back of the TVand you want the TVto
tune to a video or component video input channel when you
pressthe corresponding button.
FRNT(Front VideoInput) Component is connected to the
VIDEOjack on the front of the TVand you want the TVto
tune to the front video input channel when you pressthe
corresponding button.
Parental

Controls

and V-Chip

The choices in the USAV-CHIP menu involve software inside your TV (referred to as
V-Chip) which allows you to block TV programs and movies basedon violence, sex,
or other content you may believe children should not view.
Once you block programs, you can unblock programs by entering a password.
By default, the software inside your TVis turned "off." For instructions to turn on
V-Chip, go to page 21.

Chapter 3

Graphics contained

within

this publication

are for representation

only.

15

Usin 9 the W°s Features
How V-Chip

Works

V-Chip reads the program's age-based rating [TV-MA, TV-14, etc.) and content themes
[(Violence (V), Adult Language (L), etc.)]. If you have blocked the rating and/or content
themes that the program contains, you will receive the message This channel has not
been approved for viewing. Change channel or press OK to enter password and temporarily
deactivate the Parental ControL
Broadcasters are not required to provide content themes, so programs received with no
content themes will only be blocked if you block their age-based rating. You can also
block out programs that have been given a rating of Not Rated, and programs that are
considered unrated. The TV age-based ratings and content themes you can block follow:
USA V-Chip

Rating

System

TV-MA (Mature Audience Only) Specifically designed to be viewed by adults and may
be unsuitable for children under 17. It contains one or more of the following content
themes: crude indecent language (L), explicit sexual activity (S), or graphic violence (V).
TV-14 (Parents Strongly Cautioned) Contains some material that
find unsuitable for children under 14. Parents are strongly urged
care in monitoring this program and are cautioned against letting
age of 14 watch unattended. This program contains one or more
content themes: intensely suggestive dialogue (D), strong coarse
sexual situations (S), or intense violence (V).

many parents would
to exercise greater
children under the
of the following
language (L), intense

TV-PG (Parental Guidance Suggested) Contains material that parents may find
unsuitable for younger children. Many parents may want to watch it with their
younger children. The program contains one or more of the following content themes:
some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S),
or moderate violence (V).
TV-G (General Audience) Most parents would find this program suitable for all ages. It
contains little or no sexual dialogue (D) or situations (S), no strong language (L), and
little or no violence (V).
TV-Y7 (Directed to Children 7 years and older) Designed for children ages 7 and
above. It may be more appropriate for children who have acquired the developmental
skills needed to distinguish between make-believe and reality. Themes and elements in
this program may include mild fantasy violence (FV) or comedic violence, or may
frighten

children

under the age of 7.

TV-Y (All Children)
audience, including
children.

Themes and elements in this program are designed for a young
children from ages 2-6. It is not expected to frighten younger

Canadian

V-Chip

English

Rating

System

18+ (Adults) Programming intended for adults 18 and older. It may contain elements
of violence, language, and sexual content which could make it unsuitable for viewers
under 18. Violence Guidelines: May contain violence integral to the development of the
plot, character or theme, intended for adult audiences. Other Content Guidelines: May
contain graphic language and explicit portrayals of nudity and/or sex.

16

Graphics contained

within

this publication

are for representation

only.

Chapter

3

Usin 9 the W°s Features
14+ {Viewers

14 and over) Programming

contains themes or content

which may not be

suitable for viewers under the age of 14. Parents are strongly cautioned to exercise
discretion in permitting viewing by pre-teens and early teens. Violence Guidelines: May
contain intense scenes of violence. Could deal with mature themes and societal issues in a
realistic fashion. Other Content Guidelines: May contain scenes of nudity and/or sexual
activity. There could be frequent

use of profanity.

PG {Parental Guidance) Programming intended for a general audience but which may not
be suitable for younger children {under the age of 8). Parents may consider some content
inappropriate for unsupervised viewing by children aged 8-13. Violence Guidelines:
Depictions of conflict and/or aggression will be limited and moderate; may include physical,
fantasy, or supernatural violence. Other Content Guidelines: May contain infrequent mild
profanity, or mildly suggestive language. Could also contain brief scenes of nudity.
G {General Audience) Programming considered acceptable for all ages groups. While not
designed specifically for children, it is understood younger viewers may be part of the
audience. Violence Guidelines: Will contain very little violence, either physical or verbal or
emotional. Will be sensitive to themes which could frighten a younger child, will not depict
realistic scenes of violence which minimize or gloss over the effects of violent acts. Other
Content Guidelines: There may be some inoffensive slang, no profanity and no nudity.
C8+ {Children

8 and Older) Programming

generally considered acceptable for children 8

years and over to watch on their own. Violence Guidelines: Violence will not be portrayed
as the preferred, acceptable, or only way to resolve conflict or encourage children to
imitate dangerous acts which they may see on television. Any realistic depictions of
violence will be infrequent, discreet, of low intensity and will show the consequences of the
acts. Other Content Guidelines: There will be no profanity, nudity or sexual content.
C {Children) Programming intended for children under age 8. Violence Guidelines: Careful
attention is paid to themes which could threaten children's sense of security and well
being. There will be no realistic scenes of violence. Depictions of aggressive behaviour will
be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in
nature. Other Content Guidelines: There will be no offensive language, nudity or sexual
content.
Canadian

French V-Chip

18+ {Adults) Programming
extremely violent scenes.

Rating

System

is for adults only. This program contains sustained violence or

16+ {Viewers 16 and over) Programming is not suitable for those under age 16. This
program contains frequent scenes of violence or intensely violent scenes.
13+ {Viewers 13 and over) Programming may not be suitable for children under the age of
13. This program either contains several violent scenes or one or more scenes that are
violent enough to affect them. Viewing in the company of an adult is therefore strongly
recommended for children under the age of 13.
8+ {Viewers 8 and over) Not recommended for young children. This program is suitable for
most audiences, but it contains mild or occasional violence that could upset young
children. Viewing in the company of an adult is therefore recommended for young children
{under the age of 8) who do not distinguish between reality and imagination.
G {General Audience)

This program is suitable for audiences of all ages. It contains no

violence, or any violence that it does contain is either minimal or is presented in a
humorous manner, as a caricature, or in an unrealistic way.

Chapter 3

Graphics contained

within

this publication

are for representation

only.

17

Using the W°s Features
USA V-Chip

TV Rating

Limit

The V-Chip TV Rating Limit let you decide which TV
programs can and cannot be viewed.
To set TV programming limits:
1.

Choose ParentalControlfrom

the MAIN MENU (the

PASSWORD screen appears the first time you enter the
Parental Control menu). Create your password using the
number buttons on the remote.
2.

Highlight

and select USA V-Chip. Then select R/Ratings.

3.

Once you get to the R/RATINGLIMITscreen,
use the
arrow buttons and OK on your remote to change the
status of a TV program rating or content theme from
View to Block.

4.

For TV rating limits to take effect, turn on V-Chip active
in the PARENTAL CONTROL menu (box has check mark).

The following sections give you more details about how to
change the status of TV program limits.
Note:If you forget your password you can resetit. Makesure the
TVis off. Simultaneouslypress and hold VOL< on the TV'sfront
panel and CLEARon the remote for approximately 5 seconds.Enter
a new password next time you accessthe PARENTAL
CONTROL
menu.

The V-Chip Rating Screen
The following
screen.

is an example of where items are located within

the R/RAtiNG

LIMIT

Rating Status Field
Lets you select whether the status of the age-based rating limit
to the left is View or Block.

Content Themes
Lists the content themes
you can block or view.
Rating Field
Lets you select from

Content

a list of age-based
ratings you can
block or view.

Fields

for the selected rating,
and whether the status of
the content theme is
currently View (V) or Block
(B).
Rating Settings Area
Lets you see the current
associated content.

18

Status

Lets you select which
content themes to view

Graphics contained

within

block/view

state of age-based ratings and

this publication

are for representation

only.

Chapter 3

Usin 9 the W°s Features
Blocking Age-Based Ratings
Hierarchy

of Age-Based

Ratings

W-MA

Mature Audience Only

You can automatically block all program ratings above a
specified age-based rating level.

11/-14

Parents Strongly Cautioned

To block programs with higher ratings:

IV-PG

Parental Guidance Suggested

IV-G

General Audience

IV-Y7

Directed to Children 7 years and
older

W-Y

All Children

1.

Press the up or down arrow button to scroll to the rating
corresponding with the lowest rating you do not want
the child to watch.

2.

Press the OK button to toggle between View and Block.
The status for the rating listed to the left and all higher
ratings automatically
changes to Block.

3.

Press the up or down arrow button
and press OK.

4.

Turn on V-Chip active in the PARENTAL CONTROL menu
(box has check mark) for rating limits to take effect.

to highlight

Go back

Viewing Age-Based Ratings
After you block age-based ratings, you can change some of
the ratings back to View.

Content

Sexually explicit dialogue

L

Adult language

S

Sexual situations

V

Violence

FV

Fantasy Violence

Press the up or down arrow button
with a status of Block.

2.

Press OK to select View.

Blocking

Themes

D

1.

Specific

Content

to select the rating

Themes

You can block programs based on their content. (Content is
represented by the D, L, S, V and FV on your screen.) When
you block a content theme for a particular rating, you
automatically
block that content theme for higher rated
programs as well.
To block program content:
1.

Determine the content

2.

Press the down arrow button to scroll to the rating
whose content theme you want to change.

themesyou

want to block.

3.

Press the right arrow button to move the highlight
particular content theme status.

4.

Press the OK button to change its status to B. (In the
example to the left, you block the language {L)
corresponding with TV-14. The language for TV-MA is
blocked as well).

to a

Notes.Broadcastersare not required to provide content themesor
age-t_asedratings.
Youmust remember to activate Parental Controls for rating limits to
take effect.
Viewing

Specific

Content

Themes

If you block specific content themes, you have the option of
going back and changing some of the content themes back
to (V) View:

Chapter 3

Graphics contained

within

this publication

are for representation

only.

19

Usin 9 the W°s Features
1.

Determine the content

themes you want to change to (VJ View.

2.

Press the down arrow button to scroll to the rating whose content
change, such as B under language (L) corresponding with TV-14.

theme you want to

3.

Press the right arrow button

content

4.

Press the OK button to change the status back to V. Your child would then be able to
watch programs with the TV-14 adult language content, but not programs with TV-MA
language content.

to move the highlight

to a particular

theme status.

Note: Only the content themestatus correspondingto 11/-14 (L)language changesto (V)Vie_zHigher rated
content themes,such as that for TV-MAlanguage, do not change.
Blocking

Canadian

V-Chip

Ratings

If you receive Canadian programs you can block Canadian
English and French V-Chip by ratings only. When you block a
particular rating, you automatically
block the higher rated
programs as well.
To block Canadian English and French program ratings:
1. Select Canada V-Chip from the PARENTAL CONTROL
menu.
2.

Highlight
OK.

English Ratings or French Ratings and press

3.

Determine the rating you want to block.

4.

Press the down arrow button
want to change.

5.

Press the OK button to change its status to block (the
lock icon appears and all ratings above the one you
selected change to lock).

to scroll to the rating you

V-Chip Movie Rating Limit
Set movie rating limits by blocking

movies rated above a specified level.

To access the Movie Rating Limit menu:
1.

Press MENU on the remote control (the MAIN MENU appears).

2.

Select Parental ControL

3.

Select USA V-Chip.

4.

Select Movie Ratings.

Blocking Movie Ratings
Once you are in the Movie Rating Limit menu, follow
Canadian V-Chip Ratings.
V-Chip

Exempt

Program

the same steps described for blocking

Block

The Exempt Prgms. option lets you decide if programs that the V-Chip recognizes as unrated can be
viewed. Unrated TV programs may include news, sports, political, religious, local and weather
programs, emergency bulletins, public announcements, and programs without ratings. The Exempt
option applies to both USA and Canadian unrated programs and Canadian programs rated E.

20

Graphics contained

within

this publication

are for representation

only.

Chapter 3

Usin 9 the W°s Features
Unlocked All unrated programs are available.
Locked All unrated programs are not available.
Note: Youmust rememberto activate V-Chipfor rating limits to take effect.
Press the down arrow to highlight
the lock and unlock icon.

Exempt Prgms. Then press the right arrow to toggle between

KidPass
The KidPass feature allows parents to set a certain amount of time every day of the week that a
child can watch TV. To set KidPass:
1.

Select Parental Controlfrom

2.

Select KidPass (the KIDPASS menu appears with Current Day highlighted).

the main menu.

Note: If you can't select KidPass,you needto set the time. Highlight GoBack,pressthe right arrow,then select
Time.Highlight Time,then enter the time using the number buttons.
3.

Press the right arrow to select the current

4.

Press the down arrow button to choose the day of the week.

day.

5.

After you've chosen the day of the week, press the right arrow to select the amount of time:
Free and 00:30 up to 16:00 [30 minute increments).

6.

When you're done setting

7.

Highlight KidPass active and press the right arrow to activate the KidPass settings [box has
check mark). The KidPass takes effect immediately.

KidPass, select Go Back.

When the time has expired, the TV shuts off. If you turn on the TV the same day it shut off, the
password screen appears {enter the password used for V-Chip).
V-Chip

Active

Selecting

this option lets you activate and deactivate

parental control settings.

1.

From the PARENTAL CONTROL menu, press the up or down arrow to highlight

2.

Press the right or left arrow to turn on {box has check mark) or off {box doesn't have check
mark) V-Chip active.

If you do not activate

V-Chip,

none of the settings

for V-Chip

will take

V-Chip active.

effect.

If you forget your password you can reset it. Make sure the TV is off. Simultaneously
press and
hold VOL< on the TV's front panel and CLEAR on the remote for approximately
5 seconds. Enter a
new password next time you access the PARENTAL CONTROL menu.
Front

Panel

Lock

Selecting this option lets you lock {disable) or unlock {enable) the TV's front panel. The remote still
tunes to any channel. When using this as a Parental Control method, remove access to any remote
that is capable of operating the television.
1.

From the PARENTAL CONTROL menu, press the up or down arrow to highlight

2.

Press the right or left arrow to turn on {box has check mark) or off {box doesn't have check
mark) front panel lock.

Change

Lock Fr. PaneL

Password

Selecting this option lets you simply create a new password at any time. Once you enter a new
password from Change Passwd. in the PARENTAL CONTROL menu it is the password you use until
you change it again.

Chapter 3

Graphics contained

within

this publication

are for representation

only.

21

Sound Menu
Treble Increases or decreases the treble.
Bass Increases or decreases the bass.
Balance Press the right arrow to increase the audio output
in the right speaker; press the left arrow to increase the
audio output in the left speaker.
Sound Type Press the right arrow to scroll through the
available audio types, which control the way the sound
comes through your speakers: Mono plays the sound in mono
only. Use this setting when receiving broadcasts with weak
stereo signals; Stereo to split the incoming stereo audio
signal into left and right channels; and Enhanced for
simulated surround sound. Most TV programs and recorded
materials have stereo audio. The word Stereo appears on the
TV when you tune to a program that is broadcast in stereo.
SAP [Second Audio Program)
Plays the program's audio in
a second language, if one is available. The TV displays the
word SAP when you tune to a program that is broadcast with
SAP information. SAP audio is broadcast in mono. SAP is also
used to broadcast a program's audio with descriptions
video for the visually impaired.

of the

Auto Vol level (Auto Volume Level) Reduces the annoying
blasts in volume during commercial breaks. Eliminates the
need to constantly adjust volume control.
Audio Output
Press the right arrow to scroll through the
available output settings: Fixed allows fixed output from the
TV's audio output jacks to an external component such as a
surround sound amplifier; and Variable allows variable
output from the TV's audio output jacks.
Int. Speakers (Internal Speakers)
Turns the TV's internal
speakers on or off. Turn off the internal speakers if you have
an audio receiver or amplifier connected to the TV.

Picture Menu
The PICTURE menu options apply to the video for the main
TV and video input selections.
Picture Preset Press the right arrow to scroll through the
available picture preset settings: Natural, Bright, Soft, and
Personal Choose the setting that is best for your viewing
environment.
Auto Color Turn this option on to automatically correct the
color of the picture. This is especially useful for tracking
realistic flesh tone colors as you switch channels.

22

Graphics contained

within

this publication

are for representation

only.

Chapter 4

Usin 9 the W°s Menu System
Color Warmth
Press the right arrow to scroll through the color adjustments: Cool
for a more blue palette of picture colors; Normal; and Warm for a more red palette
of picture colors.
Brightness
Color

Adjusts the brightness of the picture.

Adjusts the richness of the color.

Contrast
Sharpness

Adjusts the difference

between the light and dark areas of the picture.

Adjusts the crispness of the edges in the picture.

Note: Sharpnessis not available for CVID2or VPORT
Tint Adjusts the balance between the red and green levels.
When you change any of these picture settings, the Picture Preset changes to
Personal Use the left or right arrow button to make adjustments. To return to the
PICTURE menu, press the up or down arrow button.

Setup Menu
Auto Ch. Search (Auto

Channel

Search)

Allows you to

choose your signal type and begin an auto channel search.
Signal Type Press the left or right arrow to toggle
between the signal your TV is receiving. Choose Cable if
you are currently using cable or a cable box for TV
signals. Choose Antenna if you are currently using an
off-air antenna for TV signals.
Start
Searches for channels the signal is receiving and
stores them in the TV's channel list. Go to page 8 for
more information.
List Ef Labels

Edit the channels in the list or choose labels

for each channel. To delete a channel from the channel list,
highlight Channel and use the left or right arrow to select
the channel. Then highlight In listand press the OK button.
The box should no longer display a check mark. To add a label
to a channel, select the channel in the Channel option. Press
the down arrow to highlight LabeL Press the right arrow to
highlight the first space. Use the up or down arrow to ascend
or descend through the characters. Continue to press the
right arrow to highlight the space and the up or down arrow
to add a character. Press OK when you're done adding a label.
Closed Caption
Many programs are encoded with closedcaptioning information, which lets you display the audio
portion of a program as text on the TV screen.
Closed captioning is not available on all channels at all times.
Only specific programs encoded with closed-captioning
information are applicable. When a program is closed
captioned, CCis displayed in the channel banner. Go to
Chapter 3 for more information about the channel banner.
The closed caption options are:
CC Display
information

Chapter 4

Graphics contained

within

this publication

Lets you choose the way closed captioning
is shown on the screen.

are for representation

only.

23

Usin 9 the W°s Menu System
Off

No captioning

On

Captioning

information

information

displayed.

always appears, when available.

Muted=On
Displays captioning information, when available, whenever
the TV's sound is muted by pressing the MUTE button. The captioning
information is not displayed when the sound is not muted.
CCMode
Choose which captioning mode is used for displaying captioning
information. If you are unsure of the differences among the modes, you may
prefer to leave the closed captioned mode set to CC1, which displays complete
text of the program in the primary language in your area.
Auto Tuning
Displays a choice list that lets you set up the TV to automatically
tune to the correct input channel when you press a component button (VCR or
DVD) on the remote. Go to Chapter 3 for details about the Auto Tuning feature.
Language

Lets you select your preferred language for the menus.

Parental Control Menu
The Parental Control menu was explained
information.

in Chapter 3. Go to page 15 for more

Time Menu
Sleep Timer Lets you set the TV to turn off after a given
time. Press the right arrow to add 15 minutes to the clock
(up to four hours).
Time ref. Ch

Choose a channel so the TV sets the time for

you. Note that local channels usually broadcast the time.
Time Time is set if you select a reference channel (see
above). If time is not obtained, then enter it manually. If it is
8:25, for example, you must first press the number 0 on the
remote, then number 8, then 2 and then 5. Use the OK
button to choose between AM and PM.
Wake-Up

Timer

Lets you set the TV to turn itself on.

Note: When the TVturns on by the wake-up timer and no remote or
front panel buttons arepressedfor 2 hours,the TVwill turn itself of£
Wake-Up Time
turn itself on.

Lets you set the time you want the TV to

Wake-Up Ch Lets you select a specific channel the TV tunes
to when the wake-up timer is set.

24

Graphics contained

within

this publication

are for representation

only.

Chapter 4

Troubleshooting
Most problems you encounter
troubleshooting
list.

with your TV can be corrected by consulting

the following

Note: If you prefer, we can provide you with the name of anAuthorized ServiceRepresentativewho will visit your home
for a fee to install your electronic entertainment system and to instruct you in its operation. Fordetails a_out this
service,call 1-888-206-3359. Foradditional assistance while using your RCAproduct, pleasevisit ww_zrca.com/
customersupport.
TV Problems
TV won't

turn

on

•

Press the TV button.

•

Make sure the TV is plugged in.

•

Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else.

•

Something might be wrong with your remote control. Pressthe POWERbutton on the front of the TV. If
the TV turns on, check the remote control solutions on page 26.

•

The front panel controls may be locked (disabled). Usethe remote control to unlock the front panel
controls by selecting the Lock Ft. Panel in the PARENTALCONTROLmenu and press OK (box won't have
check mark).

Buttons

don't

work

•

If you're using the remote control, press the TV button first to make sure the remote is in TV mode.

•

The front panel controls may be locked (disabled). Usethe remote control to unlock the front panel
controls by selecting the Lock Ft. Panel in the PARENTALCONTROLmenu and press OK (box won't have
check mark).

•

Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.

TV turns

off

unexpectedly

•

Sleep timer may have been activated. Go to page 24 for instructions.

•
•

KidPass may have been activated. Go to page 21 for instructions.
Wake-Up timer turned on the TV and no remote or front panel buttons were pressed for two hours.

•

Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then
turn on again. If this happens frequently, the voltage in your house may be abnormally high or low.

•

Unplug TV. Wait five minutes. Plug it in again.

TV turns

on unexpectedly

•

Wake-Up timer might have been activated. Go to page 24 for instructions.

•

You might have pressed CH+, CH- or OK on the remote accidentally.

Blank

screen

•

Make sure the component connected to the TV is turned on.

•

Try another channel.

No sound,

picture

okay

•

Maybe the sound is muted. Try pressing the volume up button to restore sound.

•

If using S-Video or Y, Pb, Pr, remember to also connect the component's left and right audio output jacks
to the TV'sAUDIO jacks.

•

Make sure the Int. Speakers option in the SOUND menu is turned on.

Can't

select

certain

channel

•

Channel may be blocked or not approved through the V-Chip.

•

If using a VCR, make sure the TViVCR button on the VCR is in the correct mode (press the TV/VCR button
on your VCR).

Chapter 5

Graphics contained

within

this publication

are for representation

only.

25

Other
Noisy
•

nformation

stereo

reception

May be a weak station. Access the SOUND menu, highlight

No picture,

no sound

Sound Type and then choose Mono.

but TV is on

•

Maybe the signal type is set wrong. Go to page 23 for detailed instructions.

•

The channel might be blank-

•

If you're watching your VCR and it's connected with coaxial cable to the TV ANT jack, tune the TV to
channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also make sure
the TV/VCR button on the VCR is in the correct mode (press the TV/VCRbutton on your VCR).

Sound

okay, picture

change channels.

poor

•

Check antenna connections. Make sure all of the cables are firmly connected to the jacks.

•

Try adjusting sharpness function to improve weak signals. Go to page 23 for more instructions.

Black box appears

on the screen

•

might be on. Check Closed Caption in the SETUPmenu. Go to page 23 for more

Closed-captioning
instructions.

PASSWORD

menu

appears

•

KidPass option is activated and you try to reset the time.

•

You turn the TV on after KidPassshut off the TV.

The Remote Control

Doesn't Work

•

Something might be between the remote and the remote sensor on the component. Make sure there is a
clear path.

•

Maybe the remote isn't aimed directly at the component (TV, VCR,etc.) that you're trying to operate.

•

Maybe remote is not in TV Mode. Pressthe TV button so the remote will operate the TV.

•

Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote. (Note,
if you remove the batteries, you may have to reprogram the remote to operate other components.)

•

You might need to drain the remote's microprocessor: remove batteries and press the number 1 button for
at least 60 seconds. Releasethe 1 button, replace the batteries, and (if necessary) program the remote
again.

Problems

with

The rating
•

don't

work

remember

my password

and

I want

to unlock

the TV

If you forget your password you can reset it. Make sure the TV is off. Simultaneously press and hold VOL<
on the TV's front panel and CLEARon the remote for approximately 5 seconds. Enter a new password next
time you access the PARENTALCONTROLmenu.

The V-Chip
•

limits

Controls

You must activate the settings. Go to the MAIN MENU (press MENU on your remote), select Parental
Control, highlight and turn on V-Chip active (box has check mark).

I don't
•

V-Chip/Parental

won't

let me watch

a program

even though

it's not rated

as violent.

Maybe the movie was given an NR (Not Rated) status. After you block movie ratings, you must unlock NR
separately in order to view movies with an NR rating.

Problems

with

VPORT Connection

No picture
•

Press the INPUT button until VPORTappears on-screen.

•

If using the Component video to VPORTcable, make sure the cables to the other component are connected
correctly.

26

Graphics contained

within

this publication

are for representation

only.

Chapter 5

Other Information
•

If using the Xbox to VPORTcable, make sure the end labeled TVis connected to the TV and the end labeled
XBOX is connected to the Xbox video game system. No other gaming device can be connected to the TV
with this cable.

No sound or poor sound
•

If using the Component video to VPORTcable, make sure the red and white cables are connected to the
Audio Output Jacks.

•

If using the digital audio jack on the Xbox to VPORTcable, make sure the cable is fully connected to the
jack and the audio receiver.

Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally
slots in the cabinet to help assure adequate ventilation.

dust the ventilation

The TV's screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar
the screen. If necessary, you may use a cloth dampened with warm water. Never use strong cleaning
agents, such as ammonia-based
cleaners, or abrasive powder. These types of cleaners will damage
the IV.
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and
inside the TV. Also, never place drinks or vases with water on top of the TV. This could increase the risk of
fire or shock hazard or damage to the TV.
Caution: Using video games or any external accessory with fixed images for extended periods of time
can cause them to be permanently imprinted on the picture tube {or projection TV picture tubes). ALSO,
some network/program
Iogos, phone numbers, etc. may cause similar damage. This damage is not
covered by your warranty.

Limited Warranty
What your warranty covers:
•

Defects in material or workmanship.

For how long after your purchase:
•

90 days from date of purchase for labor charges.

•

One year from date of purchase for parts.

•

Two years from date of purchase for the picture tubes.

The warranty period for rental units begins with the first rental or 45 days from date of shipment
rental firm, whichever comes first.

to the

What we will do:
•

Pay any Authorized

•

Pay any Authorized RCA Television Service Center for the new or, at our option, rebuilt replacement
parts and picture tube required to repair your television.

RCA Television Service Center the labor charges to repair your television.

How you get service:
•

For 20" screen size: Take your RCA television to any Authorized
pickup when repairs are complete.

•

For screen sizes larger than 20":

RCA Television Service Center and

Request home or pick up, repair and return service from any

Authorized RCA Television Service Center, provided that your television is located within the
geographic territory covered by an Authorized RCA Television Service Center. If not, you must take
your television to the Service Center location at your own expense, or pay for the cost the Service
Center may charge to transport

Chapter 5

your television to and from your home.

Graphics contained within

this publication

are for representation

only.

27

Other

nformation

•

To identify your nearest Authorized RCA Service Center, ask your dealer, visit www.rca.com,
the Yellow Pages, or call 1-800-336-1900.

•

Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product
is within the warranty period must be presented to obtain warranty service. For rental firms, proof
of first rental is also required.

What your warranty

look in

does not cover:

•

Customer instruction.
(Your Owner's Manual describes how to install, adjust, and operate your
product. Any additional information should be obtained from your dealer.)

•

Installation

•

Signal reception

•

Damage from misuse or neglect.

•

Batteries.

•

Customer replacement

•

Damage from images burnt

•

A television that has been modified or incorporated
other commercial purposes.

•

Acts of nature, such as but not limited to lightning

•

A television purchased or serviced outside the U.S.A.

and related adjustments.
problems not caused by your television.

fuses.
onto the screen.
into other products

or is used for institutional

or

damage.

Product Registration:
•

Please complete and mail the Product Registration Card packed with your TV or register on-line at
www.rca.com/productregistration.
It will make it easier to contact you should it ever be necessary.
The return of the card is not required for warranty

coverage.

Limitation of Warranty:
•
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED {INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO
VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON INC., ITS AGENTS OR EMPLOYEES
SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CONSUMER. THOMSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES
AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE
WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
•

Some states do not allow the exclusion nor limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not
apply to you.

•

This warranty
to state.

gives you specific legal rights, and you also may have other rights that vary from state

If you purchased your product outside
•

This warranty

the United States:

does not apply. Contact your dealer for warranty

information,

Service calls which do not involve defective materials or workmanship
are not covered by this
warranty. Costs of such service calls are the sole responsibility
of the purchaser.

28

Graphics contained

within

this publication

are for representation

only.

Chapter 5

Other Information
Remote

Ef '_

Control

the remote

control

that

came packed with your
TV. Replacements
or
spares can be ordered as
needed.
_'_

Part No.

Description

This is

Price

Screw-on

antenna

cable (3-ft)

VH81

$3.95

Screw-on

antenna

cable (6-ft)

VH82

$4.95

VH89

$5.95

VH83

$5.95

Push-on antenna

cable (6-ft)

Monaural VCR Dubbing

Cable (6-ft)

D _

VH84

$9.95

Cable (6-ft)

VH976

$7.95

Cable (12-ft)

VH913

$14.95

2-way Signal Splitter

VH47

$3.95

Amplified

ANT200

$49.95

260606

$24.99

228449

$4.45

Surge Protector

SCTV4000C

$49.95

Component

Video Cables (6-ft)

DT6DC

$24.95

Component

Video Cables (12-ft)

DT12DC

$34.95

Xbox to VPORT Cable (not shown)

GP641XB

$29.95

Component Video to
VPORT Cable (not shown)

GP650XB

$29.95

Stereo VCR Dubbing
S-Video
S-Video

RCR311TCM 1

AudioeVideo

VH47

ANT200

Antenna

Remote Control

2-way Signal Splitter
helps you connect to a
second TV or VCR.

Amplified VHF/UHF/FM
Antenna allows you to
easily switch from the
antenna signal to cable
or satellite easily
without disconnecting
antenna.

Cable (6-ft)

(RCR311TCM1)

Adapter

Prices are subject to change

without

notice.

Standard Audio/Video

Component Video
Cables Triple cable used
to connect a video
source with Y, Pb, Pr

cable with RCA-type
phono plugs.

VH83

jacks to the TV.

_2_2_ 2
SCW4000C

Surge Protector
provides eight outlets,
coaxial and telephone
line protection. Audible
alarm for surge failure.

DTGDC {6-ft)

HOW TO ORDER

DT12DC {12-ft)

ON-LINE: Accessories may also be purchased at
www.rca.com/accessories
(subject to availability).
BY PHONE: To place your order by phone, have your
Visa, MasterCard or Discover Card ready and call
1-800-338-0376.
Use this number only to place an
order for accessory items listed on this page.
BY MAIL: mail money order or check in US currency
(made payable to Thomson Inc.), along with ordering
information (part numbers), phone number and
shipping address, to the following address:

Screw-on Cable
attaches to the round
antenna connectors
(called 75-ohm F-type)
VH81 {3-ft)
VH82 (6-ft)

VH913

Chapter 5

on the back of your VCR
or TV. The ends screw
onto the connectors for
a secure connection.
S-Video Cable has
multi-pin connectors on
each end for connecting
S-Video components to
you r TV.
Graphics contained

within

Video Accessories
PO Box 8419
Ronks, PA 17573
All accessories are subject to availability.
Where applicable, we will ship a superseding model.

this publication

are for representation

only.

29

This equipment

has been tested and found to comply with the limits for a Class B digital

device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment offand on, the user is encouraged to try
to correct the interference

by one or more of the following

measures:

• Reorient or relocate the receiving antenna.
• Increase the separation

between the equipment

and receiver.

• Connect the equipment
connected.

into an outlet on a circuit different

• Consult the dealer or an experienced radio/TV technician

from that to which the receiver is

for help.

This Class B digital apparatus complies with Canadian ICES-OO3

Visit the RCA web site at www.rca.com
Please

do not

send any products

the carton.

This will

Thomson

Inc,

10330

North

Indianapolis,

only

Meridian

to the

add delays

Indianapolis

in service

address

for your

listed

in this

manual

or on

product.

Street

IN 46290

©2003 Thomson

Inc.

Trademark(s)®
Registered
Marca(s) Registrada(s)
TOCOM 1616232A

OMSON
THOMSON



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 32
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Apr 03 04:16:48 2007
Author                          : 
Title                           : 
Subject                         : 
EXIF Metadata provided by EXIF.tools

Navigation menu