RCI 3525 Electromechanical Rack Handle Lock Installation Instructions Is3525 R1115

User Manual: RCI 3525 Electromechanical Rack Handle Lock Installation Instructions Installation Instructions

Open the PDF directly: View PDF PDF.
Page Count: 3

INSTALLATION
Package Contents
• 3525 Electronic Locking Rack Handle
• 78.7” (2000 mm) Wire Harness
• M3x25mm Long Mounting Screws (qty 4)
• M3x14mm Long Mounting Screw
• Rotation Limiter
• CAM Bolt
• Top Mounting Bracket
• Bottom Mounting Bracket
• IS3525 Installation Instructions
• Keys (qty 3)
3525
3525 Electronic Locking Rack Handle
IS3525 PCN15063
R11/15GR
Specifications
Voltage: 12VDC to 24VDC (NOTE: Status LED will blink red if the supply voltage is out of range.)
Standby Current: 50mA maximum at 12VDC
Operating Current: 200mA maximum at 12VDC (with no external mechanical load applied to handle)
Operating Transit Time: 1 second maximum (NOTE: Power must be present during transit times. If power is removed
while the lock slide is moving to the unlock position, then the control input signal must be
asserted again. If power is removed while the lock slide is moving to the lock position, it will
complete it’s cycle when power is restored.)
Electronic Unlock Time: 3 seconds minimum
Alarm Outputs: 100mA/output maximum
Overall Dimensions: 6.71” H x 1.45” W x 1.98” D (170.6 x 37 x 50.25mm)
Tri-Color LED Indicator
Key Cylinder
Handle
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: SALES@RUTHERFORDCONTROLS.COM
3525 Installation Instructions (Continued)
2
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
1. Assemble handle according to the proper handing
required.
2. Rotation Limiter and Bottom Mounting bracket
determine handing.
3. If existing cam or rod mechanism are installed on
original handle remove and install on new handle.
4. Ensure the proper cutout in the door. (See Fig. 1)
5. Install handle though cutout and install top & bottom
mounting brackets.
6. Install wiring harness and route to hinge side of door
securing in place to ensure that nothing will bind or
catch.
7. Proceed to wiring. (See Fig. 2)
Handle Mounting
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
Rotation Limiter
Viewed from back.
Handle rotation is counter
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is counter
clockwise from front.
Rotation Limiter
Viewed from back.
Handle rotation is
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is clockwise
from front.
NOTE:
* 1) Cut-out dimensions.
2) Handing is determined by rotation
limiter and bottom mounting bracket.
Fig. 1
Rotation Limiter
CAM
Top Mounting
Bracket
CAM Bolt
M3x14mm Screw
(1 place)
M3x25mm Screw
(4 places)
5.9” *
150mm
1” *
25mm
Bottom
Mounting Bracket
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: SALES@RUTHERFORDCONTROLS.COM
3525 Installation Instructions (Continued)
3
Wiring
1. Red & Black are 12 to 24 VDC input voltage.
2. Orange is a positive input with a Normally Open
Switch. The lock will unlock for a minimum of 3
seconds on a momentary activation (50 millisecond
min.) or remain unlocked as long as the circuit is
closed.
3. Yellow is an alarm that will activate when the key is
used to unlock the cabinet or anytime the handle is
not seated and locked.
4. Brown is an alarm that will activate when the lock is
electrically activated and will remain on until the lock
electrically relocks.
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
Fig. 2
RED: Postive
BLACK: Negative
ORANGE: Activation Trigger
YELLOW: 100mA Output for Alarm
BROWN: 100mA Output for Alarm
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
12~24 VDC
POWER SUPPLY
BLACK
RED
ORANGE
YELLOW
100mA MAX
BROWN
100mA MAX
Fig. 2a
Lock Status Latch LED Alarm Wires
Secure Steady Blue Inactive
Electrically
Released
Blue/ Magenta
Flashing Brown Active
Mechanically
Released Blue Flashing Yellow Active
Handle Not Fully
Closed
Blue/Red
Flashing
Yellow/Brown
Active
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: SALES@RUTHERFORDCONTROLS.COM
NOTE: The lock sensor is an optical device that senses the
presence of the locking cam.
Reflectivity of the locking cam material can affect sensing.
Keyed cylinder can affect sensing.
Removal of the factory installed keyed cylinder will
void warranty.

Navigation menu