RCI ZL8ACC_R0711_ZL8ACC Mag Lock Accessories Maglockaccessories
User Manual: RCI Mag Lock Accessories Product Sheet
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Electromagnetic Locks 8 Series Mounting Accessories In or Out…we make it Easy!® ® • Flexible installation solutions • Unique armature options • Enhanced security options • Quick installation accessories for experienced installers • Flexible adjustment options ANGLE BRACKET POST BRACKET FILLER BAR TOP JAMB “Z” BRACKET (8380 Only) GLASS DOOR BRACKET ARMATURE HOLDER (Plate not included) SPLIT ARMATURE PLATE 3/8” ARMATURE PLATE (19.1mm) “L” BRACKET DSS RETROFIT KIT SPACER BUILDING CODE SIGNS CONDUIT MOUNTING BRACKET ZL8ACC R07/11SH Specifications 8 Series In or Out…we make it Easy!® ® Option Description Series Model DE8310/EW8310/8310/ 8320/8371/8372 (8330/8340 Available by request) ANGLE BRACKET Required for narrow headjamb or center-hung single-acting doors, when inadequate space is left for mounting. Ideal for narrow aluminum frames. Specify finish.* AB FILLER BAR Required when frame stop is narrower than 2” (50.8mm). Specify finish.* FB DE8310/EW8310/ 8310/8320/8371/8372 POST BRACKET Used to mount armature plate to sliding gate. 3-1/2”H x 2-1/2”W x 8-7/8”L (88.9 x 63.5 x 225.4mm) PB 8380 TOP JAMB “Z” BRACKET Required for inswinging doors. Magnet mounts on vertical face of head frame and bracket mounts to door face. Bracket allows horizontal adjustment of armature plate. Mounted on pull side of door. Specify finish.* TJ 8310/8320/8371 8372/8375/8380 GLASS DOOR BRACKET Required for glass doors without mounting rails. Comes complete with rubber shim to protect glass. Specify 1/2” or 3/4” for glass thickness. (12.7mm or 19.1mm) GB 8310/8320/8330 8340/8371/8372 8375 ARMATURE PLATE HOLDER The armature plate holder is used when the door cannot accommodate armature according to the standard mounting hardware procedures. The holder mounts on the face of the door and the armature plate is fastened to holder. Available for standard armature and DSS armatures. AH 8310/8320/8330/ 8340/8371/8372/ 8375 SPLIT ARMATURE PLATE Allows use of 8310 single magnet with pair of doors or 8375 with pair of cabinet doors cannot be used with sensor options. SA 8310/8375 DSS RETROFIT KIT If a door status sensor is desired after magnet has been installed, it can easily be added on site. Includes a reed switch and a corrosion-free ceramic magnet embedded in the armature plate for tamper resistance. Specify 3/8” or 5/8”. (9.5mm or 15.9mm) DSR 8310/8320/ 8330/8340 3/8” ARMATURE PLATE 3/8” (9.5mm)armature plates are available for frames that cannot accommodate the standard 5/8” (15.9mm) plate. Also available in DSS version. AP 8310/8320 8330/8340 SPACERS Mounting plate spacers are used to lower the magnet in order to align correctly with armature plate. Specify finish.* SP “L” BRACKET Required when there is no space left on the header to mount the magnetic lock. Magnet mounts on bracket and bracket mounts on verticle face of head frame. Specify finish*. LB BUILDING CODE SIGNS Two code-related signs are offered. “PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED WITHIN 15 SECONDS” “EMERGENCY EXIT UNLOCKED BY FIRE ALARM” Required by code on all openings where magnetic locks are used. BC SPECIAL LENGTH ARMATURE BOLTS Armature bolts for door thicknesses from 1-3/4” to 2-1/4” (55mm) Armature bolts for door thicknesses from 2-1/4” to 2-3/4” (70mm) Armature bolts for door thicknesses from 2-1/2” to 3” (80mm) SPECIAL LENGTH ROLL PINS Special length roll pins may be required when the initial magnet installation is too far from the armature plate. (Specify length.) Special Order All models CONDUIT MOUNTING BRACKET Used anywhere surface mounted conduit is required to run wires to the face of the magnetic lock. 8310 ARMB DE8310/EW8310/8310/ 8320/8371/8370 (8330/8340/8375 Available by request) DE8310/EW8310/8310/ 8320 All models 8310/8320/8330/ 8340 *Available in 28 (Brushed Anodized Aluminum) or 40 (Brushed Anodized Dark Bronze). NOTE: Specifications and availability of products are subject to change without notice. ©2011 RUTHERFORD CONTROLS INT’L CORP. WWW.RUTHERFORDCONTROLS.COM USA: 2517 SQUADRON COURT, SUITE 104, VIRGINIA BEACH, VA 23453 • CANADA: 210 SHEARSON CRESCENT, CAMBRIDGE, ON N1T 1J6 PHONE • 1.800.265.6630 • 519.621.7651 • FAX: 1.800.482.9795 • 519.621.7939 • E-MAIL: SALES@RUTHERFORDCONTROLS.COM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2011:08:07 12:14:04-04:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2011:08:07 12:14:04-04:00 Producer : Acrobat Distiller 9.4.5 (Windows) Format : application/pdf Title : ZL8ACC_R0711_ZL8ACC Creator : Owner Document ID : uuid:a1e202db-cbd8-4e05-9b64-a463719160d2 Instance ID : uuid:9173728c-d046-488e-9bf4-fa870e1dc48b Page Count : 2 Author : OwnerEXIF Metadata provided by EXIF.tools