RCI ZL8ACC_R0711_ZL8ACC Mag Lock Accessories Maglockaccessories

User Manual: RCI Mag Lock Accessories Product Sheet

Open the PDF directly: View PDF PDF.
Page Count: 2

®
Electromagnetic Locks 8 Series
Mounting Accessories
(Plate not included)
• Flexible installation solutions • Unique armature options • Enhanced security options
• Quick installation accessories for experienced installers • Flexible adjustment options
In or Out…we make it Easy!®
ZL8ACC R07/11SH
POST BRACKET TOP JAMB “Z” BRACKET
ANGLE BRACKET FILLER BAR
SPLIT ARMATURE PLATE DSS RETROFIT KIT
3/8” ARMATURE PLATE (19.1mm) SPACER
“L” BRACKET
GLASS DOOR BRACKET ARMATURE HOLDER
(8380 Only)
CONDUIT MOUNTING BRACKET
BUILDING CODE SIGNS
®
Option Description Series Model
ANGLE BRACKET Required for narrow headjamb or center-hung single-acting doors, when AB
inadequate space is left for mounting. Ideal for narrow aluminum frames.
Specify finish.*
FILLER BAR Required when frame stop is narrower than 2” (50.8mm). Specify finish.* FB DE8310/EW8310/
8310/8320/8371/8372
POST BRACKET
Used to mount armature plate to sliding gate.
3-1/2”H x 2-1/2”W x 8-7/8”L (88.9 x 63.5 x 225.4mm)
PB 8380
TOP JAMB Required for inswinging doors. Magnet mounts on vertical face of head TJ 8310/8320/8371
“Z” BRACKET frame and bracket mounts to door face. Bracket allows horizontal adjust- 8372/8375/8380
ment of armature plate. Mounted on pull side of door. Specify finish.*
GLASS DOOR Required for glass doors without mounting rails. Comes complete with GB 8310/8320/8330
BRACKET rubber shim to protect glass. Specify 1/2” or 3/4” for 8340/8371/8372
glass thickness. (12.7mm or 19.1mm) 8375
ARMATURE PLATE The armature plate holder is used when the door cannot accommodate AH 8310/8320/8330/
HOLDER armature according to the standard mounting hardware procedures. 8340/8371/8372/
The holder mounts on the face of the door and the armature plate 8375
is fastened to holder. Available for standard armature and DSS armatures.
SPLIT ARMATURE Allows use of 8310 single magnet with pair of doors or 8375 with pair of SA 8310/8375
PLATE cabinet doors cannot be used with sensor options.
DSS RETROFIT KIT If a door status sensor is desired after magnet has been installed, it can DSR 8310/8320/
easily be added on site. Includes a reed switch and a corrosion-free 8330/8340
ceramic magnet embedded in the armature plate for tamper resistance.
Specify 3/8” or 5/8”. (9.5mm or 15.9mm)
3/8”ARMATURE 3/8” (9.5mm)armature plates are available for frames that cannot accommodate the AP 8310/8320
PLATE standard 5/8” (15.9mm) plate. Also available in DSS version. 8330/8340
SPACERS Mounting plate spacers are used to lower the magnet in order to align SP
correctly with armature plate. Specify finish.*
“L” BRACKET Required when there is no space left on the header to mount the magnetic lock. LB
Magnet mounts on bracket and bracket mounts on verticle face of head frame.
Specify finish*.
BUILDING CODE Two code-related signs are offered. BC All models
SIGNS
“PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED WITHIN 15 SECONDS”
“EMERGENCY EXIT UNLOCKED BY FIRE ALARM”
Required by code on all openings where magnetic locks are used.
SPECIAL LENGTH Armature bolts for door thicknesses from 1-3/4” to 2-1/4” (55mm) ARMB 8310/8320/8330/
ARMATURE BOLTS Armature bolts for door thicknesses from 2-1/4” to 2-3/4” (70mm) 8340
Armature bolts for door thicknesses from 2-1/2” to 3” (80mm)
SPECIAL LENGTH Special length roll pins may be required when the initial magnet installation All models
ROLL PINS is too far from the armature plate. (Specify length.) Special Order
CONDUIT MOUNTING Used anywhere surface mounted conduit is required to run wires to the face 8310
BRACKET of the magnetic lock.
*Available in 28 (Brushed Anodized Aluminum) or 40 (Brushed Anodized Dark Bronze).
NOTE: Specifications and availability of products are subject to change without notice.
Specifications
©2011 RUTHERFORD CONTROLS INT’L CORP. WWW.RUTHERFORDCONTROLS.COM
USA: 2517 SQUADRON COURT, SUITE 104, VIRGINIA BEACH, VA 23453 • CANADA: 210 SHEARSON CRESCENT, CAMBRIDGE, ON N1T 1J6
PHONE • 1.800.265.6630 • 519.621.7651 • FAX: 1.800.482.9795 • 519.621.7939 • E-MAIL: SALES@RUTHERFORDCONTROLS.COM
In or Out…we make it Easy!®
8 Series
DE8310/EW8310/8310/
8320/
8371/8372
(8330/8340
Available by
request)
DE8310/EW8310/8310/
8320/
8371/8370
(8330/8340/8375
Available
by request)
DE8310/EW8310/8310/
8320

Navigation menu