RDI Technology 004RX DIGITAL WIRELESS CAMERA AND RECEIVER SYSTEM User Manual 7644A 004M rev

RDI Technology (Shenzhen) Co., Ltd. DIGITAL WIRELESS CAMERA AND RECEIVER SYSTEM 7644A 004M rev

Users Manual

QRZ\RXFDQVHH1. Power:   Pressing this button turns the monitor on and o 2. TV/AV:   If your monitor is connected to another video source, pressing this button will transfer the image from the 7" LCD monitor to the attached monitor. 3. Quad:   Opens up a quad screen view. For more information on camera viewing, please see “Camera Viewing” on Pg. 164. Volume:   This adjusts the volume of the audio that plays through your monitor5. IR Sensor:   The IR sensor is how the remote and monitor communicate 6. Manual Record:   Prompts the monitor to begin constant recording. To stop recording, press this button again7. Motion Record:  Prompts the monitor to record only when motion is detected. To stop motion recording, press this button again8. Manual Channel:   Manually changes which camera is being viewed on screen9. Auto Channel:   Turns auto channel on and o. When this function is on, the camera channels will sequence through automatically10. Delete/Scan:   This button will turn on the screen saver. The screen saver will display until motion is detected, once detected, the screen saver will close and the monitor will display the camera that detected motion.  During playback this button allows you to delete single clips of recorded footage. For more information on deleting recorded footage, please see “DELETE” on Pg. 2711. Menu/Exit:   Enters and exits the main menu12. Joystick:   This tab has many functions when accessing the menu as well as playing back footage. For information about how to use this joystick, please see “Joystick” on Pg. 14 of the manual13. Antenna:   This antenna allows for a stronger signal between the camera and monitor14. Power Input:   Plug the small end of the included power adapter marked “monitor” into this area15. A/V Out:   Plug the single end of the included A/V cable into this area16. SD Card Insert:   Your SD card can be inserted into this area to record and save footage17. Talk:   This button allows for two-way communication. The monitor and camera are both equipped with a microphone and a speaker, pressing this button allows you to speak through the camera from the monitorMONITOR
QZ\QHHREMOTE The included remote control has the same functions as the monitor with the exception of two commands that are NOT included on the remote control,  they are: •   Talk:  Cannot access talk function with remote  •   Power:  Cannot power on or o the monitor from    the remote controlCAMERA 1. Pair Button:    Located at the back of the camera, you press this button when pairing the camera and monitor. For more information, please see “Pairing” on Pg 142. Antenna:    This removable antenna allows for a better signal between the camera and monitor3. Camera Housing:   Made of anodized aluminum to prevent rust4. Infrared (IR):    The 18 LEDs allow the camera to see in the dark up to 40ft away5. Camera Lens:    The camera lens is located in the center of the LEDs 6. CDS Sensor:   Automatically turns on the infrared LEDs when it gets dark7. Motion Detection:   Detects any motion in front of the camera8. Microphone:   Allows you to hear and record sounds as well as footage 9. Camera Mount:   Allows the camera to be desk or wall mounted 10. Power connection:   This 3 ft. cord connects to the power adapter (marked “Camera”) 12345678910Back of Camera
THINGS TO CONSIDER BEFORE INSTALLATION•  The camera should be installed between 8 to 13ft above the area to be monitored•  Ensure that the camera is installed NO MORE than 100 ft away from the monitor’s position to maintain a strong signal between the camera and monitor•  Before mounting the camera, ensure there are no obstructions in the camera’s view•  Place camera in the most strategic place where it can provide detailed video of your home or business. Having the camera in the open for people to see can help deter criminals •  To cover large, dark areas such as backyards, garages, and driveways, place camera in a strategic location, such as on the roof or deck.  This way, more area is covered by the camera•  Ensure that the camera is positioned to avoid glare.  Be sure to position camera away from direct sunlight or indoor lighting•  For best results, light in front of the camera should be around the same brightness as the light around the area or object being monitored•  Decide whether the camera will be wall-mounted, ceiling mounted or mounted on a desk/table top. We recommend that the mount is secured using the included screws and hardware for all installationsThe GX301 utilizes Clear Signal Technology, meaning that it is designed to avoid the frequencies of common wireless devices. By doing so, the system does not receive interference from any standardized 2.4GHz or 5.8 GHz wireless devices within your home or business. The signal also passes easily through interior walls. However, buildings with metal frames or placing the camera near large metal objects may cause signal interference. If reception is poor, moving the camera and/or monitor closer to one another may x this problem. Interference is also possible if another device within the building (such as a cordless phone) is operating on the same frequency.AVOIDING INTERFERENCE
MOUNTING THE CAMERA1.  Decide if the camera will be wall-mounted or sitting on a desk/tabletop. The camera can be adjusted for many mounting scenarios by rotating it to the required position.•  Keep in mind that the camera is microphone equipped. If you would like audio recorded, make sure the camera is within a close enough range of the area being monitored to record  any sounds (within 6 ft)•  Be sure to mount the camera no further than 100ft away from your monitor •  Be sure to mount the camera no further than 8ft away from a power source 2.  Screw the mounting bracket into the camera’s mounting hole, turning it clockwise.3.  Ensure that the camera is strongly secured into  the wall. 4.  Adjust camera to the desired viewing angle.5.  For additional help with mounting the camera, please see the drilling template located at the back of the manual.6.   Once you have mounted the camera and placed it at the desired viewing angle, plug the camera’s power adapter (marked for camera) into the cord on the camera and then plug the adapter into a power source. (A surge protected power source is   recommended)7.   If you purchased a kit with additional cameras, repeat the above steps for all additional cameras. Note: The above photos are examples of mounting a camera, your camera will look dierent from the above images.Plug power adapter into Camera’s cordPlug into Surge Protected power sourceAdjust camera to desired viewing angleEnsure the camera is secure
\To plug monitor in: 1.  Make sure that the monitor is set up no more then 100ft from the camera. This is to ensure a strong signal between the camera and monitor. 2.  Plug the monitor’s power adapter (marked for  monitor) into the monitor’s power input area (marked “9V DC”).3.  Plug the other end of the power adapter into a power source (surge protected power source recommended). 4.  Press the power button to turn the monitor on to view and hear the camera.PLUGGING IN MONITOROnce the monitor is connected to a power source , turn it on using the power button and it will automatically pair with the camera. If the camera and monitor do not automatically pair please see “PAIRING”  Pg 14. Plug into Surge Protected power sourceTo plug the 7" LCD Monitor into another Monitor: 1.  Plug single end of the A/V cable into A/V out area on back of monitor. 2.  Plug the video jack (yellow) into the video input on your monitor and the audio jack (white) into the audio input on your monitor, then press the A/V button on the 7" LCD monitor. 3.  You may have to adjust the channels or video source input on your monitor to view the footage. 4.  Once the proper channel is set, the footage from the camera will display on the monitor. CONNECTING TO ANOTHER MONITORThe GX301 comes equipped with an audio/video cable that can be plugged into any monitor with an audio/video input. Once plugged in, you will be able to watch and hear live video, access and view the menu as well as watch playback footage from the monitor you have plugged into. Plug adapter into 9VDCPlug A/V cable into A/V out on monitor Plug A/V cord into monitor
CAMERA Image sensor.............................................................................................................1/4" CMOS ColorOutdoor use ..............................................................................................................YesIP Rating ...................................................................................................................IP56Maximum Wireless Range (Line of Sight) ..................................................................300ftOptimum Wireless Range (Line of Sight) ...................................................................100ftWireless Frequency ...................................................................................................200~2483.5MhzWireless Channel Frequencies ...................................................................................Hopping frequencyResolution .................................................................................................................360 TV LinesNight Vision ...............................................................................................................YesNumber of IR LEDs and Range ...................................................................................18,up to 40ftIR LED control ............................................................................................................Automatic (CDS Sensor)IR Cut Filter................................................................................................................YesMin. Illumination ......................................................................................................0 luxViewing Angle ...........................................................................................................62 degreeTV System .................................................................................................................NTSCFocal Length..............................................................................................................4.5mmFocus Type ................................................................................................................. Fixed FocusOptimal Focal Distance ..............................................................................................20ftMicrophone ...............................................................................................................YesMotion Detection ......................................................................................................Yes, triggers audio alarmSun Shield .................................................................................................................Yes, not adjustableHousing Material .......................................................................................................Aluminum & ABSHousing Color ............................................................................................................SilverElectronic shutter speed ............................................................................................1/60 ~ 1/15,000 secSignal/Noise Ratio .....................................................................................................>48dBCamera Bracket .........................................................................................................YesOperating Temperature .............................................................................................14°F ~ 104°FOperating Humidity ..................................................................................................85%Mounting Hardware ..................................................................................................IncludedCamera Power Input ..................................................................................................9VDC 600mAPower Adapter Input .................................................................................................AC 100~240 50/60 HzDimensions ...............................................................................................................5.25" x 4.75" x 2'' (With Stand)Weight ......................................................................................................................0.75 lbs SPECIFICATIONSMy Unit has Scrolling      horizontal lines •  Ensure that the device is set to NTSC. For more information please see “AV OUT on Pg. 22Schedule record is not working  •  Ensure that both manual and motion record modes are turned OFF for schedule record to take place
\MONITORWireless Frequency ...................................................................................................2400~2483.5MhzChannel Frequencies .................................................................................................Hopping FrequencyNumber of Cameras Supported .................................................................................4Output Terminal ........................................................................................................1/8th inch to RCA A/V outputResolution .................................................................................................................640x480 or 320x240Speaker ..................................................................................................................... Internal BuzzerMaximum SD Card Size ..............................................................................................32 GBCompression .............................................................................................................MPEG-4File Type ....................................................................................................................AVIOperation Mode ........................................................................................................SimplexScheduled Recording ................................................................................................24 Hour clockAutomatic Overwrite when Full ................................................................................OptionalMotion Activated Alert ..............................................................................................CompatiblePost Motion Recording ..............................................................................................5, 15, 30 secondsDigital Zoom .............................................................................................................1x , 2xAuto-Scanning .......................................................................................................... YesButton Lock ...............................................................................................................YesRemote Control .........................................................................................................IRIR Remote Extension .................................................................................................6 ftNew Video Footage Notier .......................................................................................Yes, LEDViewing Modes  Single, Quad, Manual,    AutomaticRecording Mode ........................................................................................................Manual, ScheduleAdjustable Brightness ...............................................................................................YesVideo Output .............................................................................................................PAL/NTSCOperating Temperature .............................................................................................14°F ~ 120°FOperating Humidity ..................................................................................................85%Housing Material .......................................................................................................Aluminum and ABS PlasticHousing Color ............................................................................................................SilverMonitor Power Input .................................................................................................9VDC 500 mAhPower Adapter Input .................................................................................................AC 100~240 V 50/60HzDimensions ...............................................................................................................4.25" x 3" x 0.75''Weight .......................................................................................................................4 lbs
\If you accidentally damage or lose any parts they can be replaced with ease. The following are parts that came with your system and their reference model numbers so you can continue to eectively monitor your premises.ADDITIONAL ACCESSORIESPRODUCT MODEL# DESCRIPTIONGX301-CExpand your system to a maximum of four cameras to monitor more locations VU100-STAlert all potential criminals of your security system and help deter crime with a window sticker SGN100Alert all potential criminals of your security system and help deter crime with this durable aluminum signYou may wish to add to your system and upgrade some components of it. Here are some items that can boost the eectiveness of your video security system.PRODUCT MODEL# DESCRIPTION Power AdaptersAudio/Video Cable SOFTWARE/MANUALSYour product software and manual are available for download at:   http://www.SVAT.com/downloads.php
FCC NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. IC NOTE:Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.This Class A/B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.   These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:   - Reorient or relocate the receiving antenna.   - Increase the separation between the equipment and receiver.  -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   -Consult the dealer or an experienced radio/TV technician for help.

Navigation menu