RDI Technology BM200M 5 Inch Wireless Touch Monitor User Manual CM542512 20180104

Download:
Mirror Download [FCC.gov]
Document ID	3815250
Application ID	uYKucOAdeAaXIWcHs1i43w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	116.07kB (1450921 bits)
Date Submitted	2018-04-13 00:00:00
Date Available	2018-04-13 00:00:00
Creation Date	2018-01-05 17:08:08
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2018-04-13 10:01:15
Document Title	Microsoft Word - CM542512 User Manual 20180104
Document Creator	PScript5.dll Version 5.2
Document Author:	tony

5 Inch Wireless Touch Monitor with P/T HD Camera
BC200 Wilreless P/T HD Camera
BM200M 5 Inch Wirelss Touch Monitor
WARNING
STRANGULATION HAZARD ‐ Keep cord out of child's reach. NEVER place camera or cords within 3
feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters
provided.
• Some adult assembly or installation required.
• This product contains small parts that may cause choking. Keep small parts away from children.
• This product is NOT intended to replace proper supervision of children. You MUST check your
child’s activity regularly, as this product will not alert parents to silent activities of a child.
• Before using this product, read and follow all instructions contained in this booklet, and read and
follow all instructions and warnings on the product.
• NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet
basement, etc.
• This product is intended for indoor use only.
• This product is not intended for use as a medical monitor and its use should not replace adult
supervision.
• The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a
child. If the child moves outside of this range, if may not be able to detect sounds from him or her.
• It is essential that you check the operating range and condition of the transmitter monitor on initial
installation and on a regular basis after that.
• Check reception regularly. Test monitor before use and after changing camera location.
• Do not take apart the product by yourself.
• To prevent overheating, keep the product and AC power adapters away from any direct sunlight
and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other
appliances that produce heat (e.g., amplifiers, televisions and stereos).
• Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that
may block ventilation.
• Use only the AC adapters provided with the product, as other adapters may damage the product.
Plug the adapters only into standard household current (100~240 volts AC). Place the AC adapters
avoiding pinch points otherwise you can damage the adapters.
• When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC
adapter’s cord.
• Do not use extension cords with the AC power adapters to avoid entanglement.
• Images and sounds are transmitted by the product over public airwaves and transmissions may be
picked up by other units. (Although the transmission distance is 100m or longer, it may vary
depending on whether there are obstacles between the camera and the monitor.)
• Caution if you use the system to watch a young child, do not place the camera where the child can
reach.
• When using the system with only battery power and the charge is low, then the picture and or
sound may affected. If this occurs then please connect the AC power adapter.
The transmission range of the wireless signal may weaken if heavy obstructions such as a concrete,
brick, or metal walls are between the camera and monitor, or if there are several Wi‐Fi routers and
devices in your environment.
To avoid interference with RF signal, keep your cell phone at least 3ft away from the Camera and
Monitor.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Features:
5’’ portable LCD monitor
2.4 GHz digital wireless technology
System expandable up to 4 cameras, signal display or quad display
Multiple language selection
HD(720P) camera with night vision and sound trigger
Lullaby and temperature display
2 way audio‐monitor can talk back to camera
Night light
Digital zoom, pan & tilt
Rechargeable Lithium battery for portable use
Extended battery life with Power Save mode
Secure, long‐range digital wireless signal up to 900 ft
Camera with mounting bracket for wall / ceiling mounting
What's Included
Product Overview
Wireless Camera
Wireless Monitor
Getting Started
Installing the Monitor & Camera
1. Fully charge the monitor via power adapter or charging cradle before use. Camera must be
plugged in at all times.
2. Place the camera in the preferred position. You can place it on the table/cabinet, or mount it on a
wall via mounting frame.
3. Press the power button for about 4‐5 second to turn on the monitor.
4. Press and hold the on/off button to switch the camera on.
Pairing the Monitor & Camera
The units already come paired for your convenience.
If you have additional camera, pair your camera as follow:
1. Power on wireless monitor and wireless camera.
2. Touch the live view screen on the monitor to make the settings icon appear.
3. Press the [
4. Press [
] button on the monitor.
] icon and select camera number.
(The monitor will search for the camera when set to pairing mode. A countdown clock will appear at
the middle of the screen and will start counting from 30 to 0).
5. Press the [PAIR] button found on the bottom of the camera.
6. If the monitor successfully pairs with the camera within the 30 seconds, it will automatically switch
to the camera's current view.
Indicator Description
Live View
Shows the strength of the signal being received from the camera. If an 'x'
1. Signal indicator:
shows up on the signal bar, then the system is "out of range".
2. Digital Clock:
Displays the time that is set on the monitor.
3. Camera number:
4. Zoom mode:
Indicates which camera is being displayed on the current screen
Indicates Zoom mode. x1/x1.5/x2
5. Monitor Speaker Mute:
Indicates the monitor's speaker is muted
Shows the status of the battery
6. Battery Power Level:
• Battery Status
A battery charge state indicator within the LCD will show the level of charge indicating five states,
including alert (flashing red battery outline), 1/4, 1/2, 3/4 and full.
Flashing Red Battery Frame
¼ Battery fill Red
½ Battery fill White
¾ Battery fill White
Full Battery fill White (the power supply is not connected)
Full Battery fill White and lightning bolt icon alternately (the power supply is connected)
When the power supply is connected the lightning bolt icon displayed over the centre.
7. Temperature Display:
8. Feed time counter:
9. Night Light On/Off:
Shows the temperature of the room.
A countdown clock of the feed time.
Indicates if the night light is on or off. You can control the night light on
the camera remotely or manually
10. Quad Mode :
Press this button to switch to quad mode. When two cameras are paired, there
will be two displays. If there are more than two cameras paired, there will be four displays. Up
to 4 cameras can be paired. You can’t listen to the audio from cameras.
11. Talk Back:
Press this button while talking.
Note:
a) “Talk Back” button only appear on single camera Live View mode
b) Press and hold Talk Back button, can activate talk back function
c) If camera unit was playing lullaby, it then it will be paused.
d) The camera speaker loudness setting is same as lullaby play level. (select Menu >Sound >Camera
Volume)
e) If release Talk Back button, then go back to Live View mode. If Camera previously lullaby has
been turned on, then it will resume play lullaby again.
Operation Key
By tapping any position on the screen then “Operation” keys come out
If user tapes screen without touching any function key (or time is out after 10 seconds), then it will
back to Live View mode.
1. Menu Setting:
Menu setting includes monitor and camera settings
2. Monitor Volume:
3. Zoom In / Out:
4. Lullaby:
adjust the monitor volume
You can have a closer look via this button
Press the Lullaby icon to turn lullabies ON/OFF. Plays 4 pre‐programmed songs
5. Navigation Controls:
Use this icon to remotely Pan/Tilt the camera
Menu Page
1. Pair / Unpair Camera：
2. VOX:
You can connect up to 4 cameras to your system.
Set the VOX sensitivity to detect low or high sound levels.
3. Date & Time & Timer:
4. Language:
Set up the system date & time & feed timer.
Setting language for the monitor.
You can adjust the brightness of each individual camera.
5. Brightness:
6. Temperature:
You can set Celsius or Fahrenheit.
7. Camera & Alarm Volume:
You can adjust the camera and alarm volume: 5 being the loudest
and 0 being mute.
8. Default:
9. Back:
10. Home:
Reset the monitor back to its factory settings.
Save the settings and return to previous page.
Return to Live View.
Specification
Kit
Operating Frequency Range
2.4GHz
TX Power
17dBm
RX Sensitivity
‐88dBm
Type of Spread Spectrum
Used
FHSS
Type of Modulation Used
GFSK
Data Rate
4Mbps
Communication Range
300M
The transmission range of the wireless signal
may weaken according to your environment.
Camera
Image sensor type
1/4" Color CMOS Image sensor
Effective Pixel
1280 (H) x 1024 (V)
Power requirement
5V DC 1.5A
Image Resolution
10fps@1280*720
Lens
3.95mm F2.2
Viewing Angle (Diagonal)
55° (FOV)
IR LED / Night Vision Range
5m 940nm
Operation temperature
‐10~40°C
Monitor
LCD Panel size
5" touch panel
LCD Resolution
800x480
Operating Temperature
14°F~104°F(‐10~40°C)
Operating Humidity
0% ~ 85%
Power requirement
5V DC 1.5A
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of
the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
The SAR limit adopted by USA and Canada is 1.6 watts/kilogram (W/kg) averaged
over one gram of tissue. The highest SAR value reported to the Federal
Communications Commission (FCC) and the Industry Canada (IC) for this device
type when it is tested for use at the properly worn on the body is 0.084 W/kg.
The device complies with the RF specifications when the device is used near your
ear or at a distance of 0 mm from your body. Ensure that the device accessories
such as a device case and a device holster are not composed of metal components.
Keep your device 0 mm away from your body to meet the requirement earlier
mentioned.
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 0 mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device should
not contain any metallic components. Body-worn accessories that do not meet
these requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : tony
Create Date                     : 2018:01:05 17:08:08+08:00
Modify Date                     : 2018:04:13 10:01:15+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2018:04:13 10:01:15+08:00
Format                          : application/pdf
Title                           : Microsoft Word - CM542512 User Manual 20180104
Creator                         : tony
Document ID                     : uuid:d425743d-d898-4a18-8ba1-5d73589a04b9
Instance ID                     : uuid:d854f962-2fd9-4d0f-b999-22e4784b5c59
Page Count                      : 11

EXIF Metadata provided by EXIF.tools