RDI Technology CA630HR Digital Wireless Camera User Manual USERS MANUAL

RDI Technology (Shenzhen) Co., Ltd. Digital Wireless Camera USERS MANUAL

USERS MANUAL

Page 1CONTENTS:Quick Start GuideDigital Wireless ColorCamera with StandWireless Antennafor cameraPower Adaptorfor camera*• Aim the Cameras to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.• Avoid installing the cameras where there are thick walls, obstructions, or interference (i.e. transformers, microwave ovens or other electrical equipment) between the Cameras and the Receiver.• Select a location for the camera that has an ambient temperature between 14°F~122°F (-10°C~50°C)• Before starting permanent installation, have another person hold the camera for you while you verify its performance by observing the image on a monitor. INSTALLING THE CAMERABefore you install the camera, carefully plan where and how it will bepositioned, and where you will route the cable that connects thecamera to the power adaptor.INSTALLATION WARNINGS1. Carefully unpack the Camera.2. Mount the stand to the wall: • Mark the position of the screw holes on the wall. • Drill holes and insert the drywall plugs as needed. • Firmly attach the stand to the wall using the provided screws.3. Attach the Antenna to the Camera prior to mounting.4. Place the camera in the desired mounting position. Tighten the thumbscrews to secure the camera to the Stand. Adjust the angle of the camera until the desired view is set.*May not be exactly as shownNOTE: AVOID INSTALLING IN ALOCATION WHICH REQUIRESTHE WIRELESS SIGNAL TO PASSTHROUGH CEMENT, CONCRETEAND METAL STRUCTURES. THIS WILL REDUCE THETRANSMISSION RANGE.MountingHardware KitCOLOR DIGITAL WIRELESS INDOOR/OUTDOORACCESSORY MOTION CAMERAQUICK START GUIDECAMERA OVERVIEW1. PIR Sensor: Passive IR motion sensor for more accurate motion recording.2. Microphone: Built-in microphone underneath camera body.3. Lens: Camera lens.4. Night Vision IR: Night vision IR LEDs used for viewing in complete darkness.5. Speaker: Speaker for two-way audio.6. Pair: Pairing button. 7. Antenna: Wireless antenna.8. Power Cable: Connect the included power adapter to the cable extending from the camera.7
Page 2CONNECTING CAMERA POWER ADAPTORConnect one end of the camera Power Adaptor to the camera and the other end to an electrical outlet.1. Press MENU on the wireless receiver or remote control.2. From the Main Menu, select Pairing and press the Enter button.3. Select Camera 2 or Camera 3 or Camera 4 and pressthe Enter button.4. Following the on-screen prompt, press the Pair button on the rear panel of the camera. You have 30 seconds topress the PAIR button on the camera. Once paired, thecamera will be immediately displayed on-screen.NOTE: If you do press the Pair button on the camera duringthe 30 second pairing window, repeat steps 1~5 to try thepairing process again. Pairing ButtonADDING THE ACCESSORY CAMERA TO YOUR SYSTEMThe Pairing Function assigns each camera to a differentchannel on the wireless receiver (connect up to 4Cameras), and is necessary for configuring additionalcameras. By default the camera that came with the sys-tem is assigned to channel no. 1 NOTE: It is highly recommended to pair the AccessoryCamera to the Receiver before permanently mounting thecamera. For detailed information, please check the own-ers manual for the system.Connect power adaptor tolocal power outletCOLOR DIGITAL WIRELESS INDOOR/OUTDOORACCESSORY MOTION CAMERAQUICK START GUIDE
FCC NOTE： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Navigation menu