RDI Technology M270 WIRELESS LCD MONITOR User Manual 2

RDI Technology (Shenzhen) Co., Ltd. WIRELESS LCD MONITOR 2

USERS MANUAL

900MHz Wireless Color Baby Camera System Includes: Color Video/Audio Camera & LCD Monitor
Congratulations on your purchase of the 900MHz Wireless Baby Care Color Camera System (CMS2727). The System consists of a wireless LCD Monitor and a wireless color day & night Baby Camera. An ideal product for watching the baby, elder or patient application. Features /// * 900MHz wireless technology * Plug & play installation * The system supports up to 3 cameras * 2.4 inch TFT-LCD screen for good picture display * The Brightness, Alarm volume, and Audio volume can be adjusted * LCD Monitor can work with 3 modes: Scan, Auto and Manual * Monitor with A/V output port connecting to TV * Adjustable dwell/cycle time between cameras in Auto mode * Baby Camera with sound trigger & night vision * Baby Camera with friendly designation of night light * Camera with Velcro for cradle mounting * Both camera and monitor can be operated by rechargeable battery pack * Both LCD Monitor and Baby Camera can be wall mounted or table top System Contents /// Identify all parts before proceeding with installation Things to Consider before Installation /// For best performance, follow these simple guidelines: * The camera should be aimed accordingly to optimize viewing area * For best transmission, avoid installation where there are thick walls or major obstructions between the camera and LCD monitor Installing the Camera (Transmitter) /// 1. Unpack the Camera 2. Decide on wall or desk mounting the Camera. If wall mounting, there is a useful guide on the back cover of the instructions, and the rechargeable battery pack should not be used then. If cradle mounted, use the Velcro in the package to mount the camera on the cradle. Anyway, the Camera head can be rotatable for ideal or required position. 3. To use the camera power adapter, connect power jack to the input on the back of the Camera base. Make sure the Camera is positioned no more than 5 feet from an AC power outlet.
4. You can adjust the sensitivity for the sound alert feature by adjusting the SOUND TRIGGER knob found on the side of the Camera. 5. The Camera (Transmitter) installation is now complete. Night Vision /// The Camera includes IR LEDs, which allows viewing up to 5 feet in the dark automatively when used with the adapter. Adjust the “brightness” knob may get better display for darkness use. Night Light /// The friendly designation is the button for night light which is located on the top of the camera. When press the button, the top of the camera will be lightened. The soft light avoids dazzling baby's eyes in the dark. Installing the LCD Monitor (Receiver) /// Main Operation 1. If use the rechargeable battery base (see the right picture), Plug the LCD Monitor AC power supply into the power jack in the battery recess of the battery base. If not (see the left picture), Plug the LCD Monitor AC power supply into the power jack in the battery recess of the LCD 2. Turn on the LCD Monitor by pressing the front panel power button. 3. Choose the channel to match the camera and you can see the image from camera. Optimizing the Wireless Camera System /// * The 900MHz video signal passes easily through your home’s interior walls, but the signal may be reflected by power wires or plumbing inside the wall. * Sound Level can be adjusted using the volume control button on the panel of the Monitor.
* Adjust Brightness as required using +/- button on the right side of the LCD Monitor. * The Sensitivity of Sound Trigger can be adjusted by Baby Camera’s TRIGGER LEVEL knob. * The most common source of interference are microwave ovens, WiFi products. Try to avoid mounting the LCD Monitor near a microwave oven or other source of RF interference such as cordless phones, WiFi products. * To avoid the interference from camera, we recommend you set your WiFi at channel 10. Multi-camera Operation /// The Wireless Baby Care Color Camera System (CMS2724L) is designed to work with up to 3 Cameras. Additional Camera are sold separately. IMPORTANT: When using more than one Camera, make sure each Camera is assigned to a specific channel by adjusting the corresponding DIP switch down. Accordingly the DIP switch located on the bottom of the LCD Monitor should be adjusted to reflect the channel in use. Sound-Trigger Cameras /// The baby Camera has the Sound Trigger Feature. When a Camera detects sound, an audio alert sounds on the LCD Monitor(The audio alert is adjustable). The Sensitivity of the Sound Trigger can be adjusted by the Baby Camera’s TRIGGER LEVEL knob on side of the Camera head. Operating Modes /// The system can be set to operate in one of 3 modes: SCAN, AUTO or MANUAL. The desired operating mode can be selected using the buttons on the front panel of the LCD Monitor. SCAN Pressing the SCAN button places the system in Scan mode. The LCD Monitor screen blanks into a standby mode while the system continuously scans active Cameras. If a Camera detects sound above the preset sound trigger level, the LCD Monitor displays the Camera picture and the beeper will sound. Four minutes after the last detection, the screen returns to standby mode and the LCD Monitor resumes scanning. Pressing the MANUAL or AUTO button will cancel this mode. AUTO Pressing the AUTO button places the system in Auto mode. In this mode, the system automatically rotates through all active Cameras. When a Camera detects sound above the preset level, the LCD Monitor will display the picture from the Camera for a few seconds, and the beeper will sound. To avoid searching the channels that do not have cameras/transmitters assigned to them, set the dip switches (located on the bottom of the LCD Monitor) for those corresponding
channels to the OFF position. The dwell/cycle time (time taken to switch between cameras) is preset to four seconds and can be adjusted between 2-30 seconds. To adjust the dwell/cycle time, press both the AUTO and MANUAL buttons simultaneously. Each flash of the LED increases the dwell time by one second. MANUAL To select a specific Camera to LCD Monitor, press the MANUAL button. The LCD Monitor will switch to a different Camera each time the MANUAL button is pressed. To avoid searching channels that do not have Cameras assigned to them, set the dip switches (located on the back panel of the LCD Monitor) for those corresponding channels to the OFF position. Monitor Functions /// POWER Press to turn the Monitor on/off. ALARM VOLUME The ALARM VOLUME of the LCD Monitor can be adjusted by tuning the Alarm Volume tuner on the side of the LCD Monitor. VOLUME You may adjust the Sound Level by pressing “+” or “-” on the Volume button. BRIGHTNESS You can press "+" or "-" on the right side of the LCD Monitor to adjust the brightness of the picture if necessary. Trouble Shooting /// If you are having trouble operating this product, please consult the guide below; SYMPTOM REMEDIES No camera picture 1. Check all connectors. Make sure camera (s) and monitor are switched ON. 2. Ensure camera (s) and monitor are set to correct channel(s) 3. Make sure camera is within range of monitor (receiver).
Blank monitor 1. Make sure monitor is switched ON. 2. If using AC adapter, make sure it is plugged in. 3. Make sure rechargeable battery is charged. Interference on 1. Make sure each camera (transmitter) is within range, and camera picture that no large obstructions are blocking the signal. 2. Try repositioning the camera, monitor or both to improve the reception quality. 3. Reposition other nearby equipment transmitting on 900MHz frequency. Audio problems 1. Ensure the volume is turned up sufficiently on the monitor. 2. Make sure the sound is within the microphone range. 3. If the unit emits a loud wailing sound (feeds back), try moving the camera away from the monitor or angle the monitor differently. Specifications /// Camera (Transmitter) TV System NTSC or PAL standard Integrated Lens 5.6mm, fixed focus Resolution 360 horizontal TV lines Signal/Noise Ratio 48dB Image Sensor 1/3” CMOS Min. Illumination 0.1 lux Current Consumption 150 mA Frequency Range 910, 920MHz Modulation FM Channel Selection Electronic tuning with PLL Overall Size 2.0"W*3.2"H*3.1"D Monitor (Receiver) Frequency Range 910, 920MHz Current Consumption 350 mA Channel Selection Electronic tuning with PLL Signal/Noise Ratio 38dB Battery (for Monitor) Voltage 7.4V Li-polymer Battery Pack approx. 2.5 hrs. Continuous (Build-in) > 5 hrs. standby Battery (for Camera) Rechargeable Battery Pack approx. 4 hrs. Continuous (Optional) General Operating Temperature -10oC to 40oC 14oC to 104oF
Humidity Less than 85% Approvals /// This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. CE directive 95/5/EEC, EMC directive 89/336/EEC, LV directive 73/23/EEC. This class B digital apparatus complies with Canadian ICES-003. Warranty /// This product has o one year manufacturer’s warranty which covers parts and labor only. In the Unlikely event that you encounter a problem, the unit should be returned to the place of purchase. Drilling Template for Wall Mounting Camera (s) /// For wall-mounting Camera (s), drill two holes using a 1/4” drill bit and the template below. Insert supplied wall anchors into holes and secure Camera to wall with supplied screws. .

Navigation menu