RDI Technology ULC58 LightCAM User Manual BW2101 OM Warr upd 30Sep11

RDI Technology (Shenzhen) Co., Ltd. LightCAM BW2101 OM Warr upd 30Sep11

User Manual

ULC58Owner’s Manual© 2016 Uniden America CorporationIrving, TexasIssue 1, July 2016Printed in ChinaFor use with - UDR777HDUDR780HD
2CUSTOMER CAREAt Uniden®, we care about you!If you need assistance, please do NOT return this product to your place of purchase. Quickly find answers to your questions by:1. Reading your owner’s manual, included with this product.2. Visiting our customer support website at www.uniden.com.Uniden surveillance products are not manufactured and/or sold with the intent to be used for illegal purposes. Uniden expects customers’ use of these products to be in compliance with all local, state, and federal law. For further information on video surveillance and audio recording legal requirements, please consult your local, state, and federal law.© 2016. All rights allowed by law are hereby reserved.
3IMPORTANT SAFETY PRECAUTIONS #This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user.When using your equipment, always follow basic safety precautions to reduce the risk of re, electric shock, and injury to persons, including the following: xThe camera has an IP65 weather rating. Water can be sprayed on them and they will still work; however, the cameras cannot be submerged underwater. xAlthough the camera can be exposed directly to the rain, it is recommended that, if it is used outdoors, it should be mounted under some type of cover like a patio overhang or eave. As rainwater drops start to dry on the camera glass, it can cre-ate spots that will reect the light from the infrared LEDs used for night vision, thus causing lower quality video. xTo avoid any risk of electric shock from lightning, avoid handling any electronic devices (except battery-powered ones) during an electrical storm. xUse only the power cord indicated in this manual. xNever tug or pull on any power cord; be sure to leave some slack in the cord when placing your equipment, and always use the plug to unplug cord from the wall outlet. xNever leave the power cord where it can become crushed, cut, or frayed; when running power cords, avoid letting it rub against any sharp edges or lie across any high trafc areas where people might trip over it. xDo not use the device if the adapter cord or plug has been damaged or if the camera has been dropped or is damaged. xWARNINGS TO PARENTS AND OTHER USERS Failure to follow these warnings and the assembly instructions could result in serious injury or death. This product is not designed or intended for use as a medical monitor, nor should this product be used as a substitution for medical or parental supervision. Always be sure that both the transmitter and receiver are working properly, and are within range of each other. xSTRANGULATION HAZARD. Keep the adapter cords out of the reach of children. xWARNING: KEEP OUT OF THE REACH OF CHILDREN. This product is not a toy and is not intended for use by any children under the age of 13. If you are between the ages of 13 and 18, review these terms, conditions and safety warnings with your parents or guardian to make sure that you and your parent or guardian understand these terms, conditions, and safety warnings. xAllow for proper ventilation when units are in use. Do not cover the camera or receiver with any object such as a blanket. Do not place it in a drawer or in any location which would mufe the sound or interfere with the normal ow of air.
4SAVE THESE INSTRUCTIONS!For best results:To avoid damage to your equipment, follow these simple precautions: xDo not drop, puncture or disassemble any part of the equipment. There are no user-serviceable parts inside. xDo not expose the equipment to high temperatures, and avoid leaving the equip-ment in direct sunlight for more than a few minutes. Heat can damage the case or electrical parts. xDo not place heavy items on top of the equipment or expose the equipment to heavy pressure. xRemove the power adapter during long periods between usages. xClean only with a dry cloth.Failure to follow the instructions in this operating manual will void the warranty. Uniden assumes no liability for damages to property or injury to persons caused by improper handling or failure to comply with these safety instructions.
5ULC58 LIGHT CAMERAThe ULC58 Light Camera is an accessory camera for either the UDR777HD or UDR780HD systems. WHAT’S IN THE BOX• Digital Wireless Camera with stand (1)• AC Adapter for Camera (1)• Mounting screws and anchors (1 set)• Antenna (1)• Owner’s Manual (1) #If any items are missing or damaged, visit our website for assistance - www.uniden.com.PARTS OF THE CAMERA No. What it does1 Camera Antenna: Sends and receiveds signals to/from the monitor.2 Pair Button: The pair button is located on the back of the camera. It is used to pair the camera with monitor.3Microphone: Transmit audio to monitor.4 Camera Lens: Catches the video in front of the lens and transmits video from camera to monitor.5 PIR Sensor: Detects motion in front of the lens and emits detection signal to transmitter.6 Speaker: Produces the sound transmitted from the monitor.7 IR LED: Infrared LED improves viewing in low/no light conditions.8 6 white LEDs turn on when motion is detected or when a preset time range begins. #This camera includes an auto mechanical IR cut filter. An audible clicking sounds when the camera changes between day and night modes.12345678
6SET UP THE ULC58 CAMERABasic steps to install and set up the ULC58 camera are:1. Update the UDR system firmware for the ULC58 camera.2. Pair the ULC58 camera to the UDR system.3. Install the ULC58 camera.4. Set ULC58 camera paramaters.UPDATE MONITOR FIRMWARE FOR ULC58Go to www.uniden.com and search for the ULC58 product page. Follow the instructions to update your monitor.1. Eject the SD card from the monitor.2. Insert the SD card into the SD card adapter (included) and then insert it into your PC. If your PC does not have an SD card slot, you will need to use an SD card to USB adapter (not included).3. Go to www.unidenvideo.com. 4. Copy UDR780HD firmware to the SD card.5. Remove the SD card and reinsert it into the monitor.6. From General Settings, tap Firmware Upgrade/From SD Card. The UDR780HD reboots and upgrades the firmware. After the upgrade is complete, a Light Settings tab replaces the Playback tab. #Once you add the ULC58 camera to your system, you need to access the Playback screens differently. Tap the SD Card icon ( ). The Recording File List screen displays. See the UDR780HD Owner’s Manual for details.PAIR ULC58 TO UDR SYSTEMPair the camera to the monitor before you install it. Once the camera is paired, the monitor displays live video from it. This live video will help you position the camera for the best viewing angle.Tap the following icons as they appear on the monitor screens: This screen should display: 
71. Attach the camera’s antenna and plug the camera into power.2. Tap Pairing on the Camera Setup screen.3. Tap the channel number you want to pair the camera to. 4. A message displays with instructions to press the PAIR button on the camera. A 30-second countdown begins. Press and release the PAIR button on the back of the camera (see page 5). #You must press the PAIR button on the back of the camera during the 30-second countdown; otherwise, the camera will not be paired. 5. The system displays live video 3 seconds after the camera is successfully paired.INSTALL THE ULC58When you are positioning the camera, bring the monitor along; it’s much easier to find the best viewing angle when you have the display handy. #The monitor’s battery will last about 2 hours on its own.1. Position the camera where you want it, plug it into power, and check video on the monitor. Move the camera if the view is not what you want. 2. Hold the base of the camera stand where you want to mount it and mark the location of the screw holes. 3. Use the included screws and anchors to attach the base to the wall or ceiling.4. Tug gently on the stand to make sure it is securely in place.SET ULC58 PARAMETERSThe Light Settings on the main screen tab lets you:• Set how long the light will be on once it is activated• Set a timer for the light to be on during a specified time period• Dim the light intensity DurationThe Duration option allows you to set the length of time the light stays on after it is triggered. Options are 1, 3, or 10 minutes, or Off.
8TimerThe Timer option lets you set a start and end time for the light camera to turn itself on and off.DimmerThe Dimmer option lets you set how strong the LED lights will display. Options are 25%, 50%, 75%, and 100%.
9PRODUCT SPECIFICATION Camera SpecificationsImage Sensor 1/2.7 inch FHD Single chip CMOS Image SensorEffective Pixel Area 1920 (H) x 1080 (V) Image Processing Format H.264Image Resolution / Frame Rate Full High Definition 1080p (FHD) @10fps / High Definition 720p @ 24fpsLens 3.6mm F1.8Low Light Resolution <8~15 lux IR onLow Light Solution 1 SMT IR LED, 1 low light sensorNight Vision Up to 30 feetIR cut filter YesViewing Angle / Field of View 92° Automatic Gain Control AutoAutomatic Electric Shutter (AES) Speed 1/10 ~ 27/100 SecondWhite Balance AutoPower Requirement 9V 2A DC +/-10%Power Consumption 1680mA Max (with IR LED and white LEDs on)Operating Temperature Range+14° F to 122° F (-10° C to +50° C)Operating Humidity Range 0%~ 85%Dimensions 8.3 x 3.2 x 3.6 in (211 x 82 x 93mm)Environment Rating IP65RoHS Compliance (Hazardous Substances) YesFCC ID SJ8ULC58IC ID 7644A-ULC58Camera Housing Material MetalRecycling and Disposal Information xDo not dispose of electronic devices or any of their components (especially batter-ies and LCD displays) in your municipal trash collection. xConsult your local waste management authority or a recycling organization like Earth911.com to nd an electronics recycling facility in your area.FCC Compliance InformationFCC Part 15 ComplianceThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
10Changes or modications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.Avis de conformité à la FCC : Ce dispositif a été testé et s’avère conforme à l’article 15 des règlements de la Commission fédérale des communications (FCC). Ce dispositif est soumis aux conditions suivantes: 1) Ce dispositif ne doit pas causer d’interférences nuisibles et; 2) Il doit pouvoir supporter les parasites qu’il reçoit, incluant les parasites pouvant nuire à son fonctionnement.Tout changement ou modication non approuvé expressément par la partie responsable pourrait annuler le droit à l’utilisateur de faire fonctionner cet équipe-ment.IC ComplianceThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer-ence that may cause undesired operation of the device.Changes or modications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.Cet appareil est conforme aux normes RSS exemptes de licences d’Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférences nuisibles et (2), il doit pouvoir accept-er les interférences, incluant celles pouvant nuire à son fonctionnement normal.Tout changement ou modication non approuvé expressément par la partie responsable pourrait annuler le droit à l’utilisateur de faire fonctionner cet équipe-ment.One-Year Limited Warranty #Important: Evidence of original purchase is required for warranty service.WARRANTOR: Uniden America Corporation (“Uniden”) ELEMENTS OF WAR-RANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limita-tions or exclusions set out below.WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or neces-sary, (B) modied, altered, or used as part of any conversion kits, subassemblies, or any congurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s manual for this product.STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its op-tion, repair or replace the defective unit & return it to you without charge for parts, service, or any other cost (except shipping & handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warran-tor, at its option, may replace the unit with a new or refurbished unit.THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABIL-ITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limi-tation or exclusion may not apply to you.
11LEGAL REMEDIES: This warranty gives you specic legal rights, & you may also have other rights which vary from state to state. This warranty is void outside the United States of America & Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you are certain that the Prod-uct is defective, pack the Product carefully (preferably in its original packaging). Disconnect the battery from the Product & separately secure the battery in its own separate packaging within the shipping carton. The Product should include all parts & accessories originally packaged with the Product. Include evidence of original purchase & a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:Uniden America Service C/O Saddle Creek 743 Henrietta Creek Rd. , Suite 100 Roanoke, TX 76262
IC Caution: IC Note : Cet appareil est conforme à la Partie 15 des règlements de la FCC et aux normes RSS de l’Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer des interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer un fonctionnement indésirable. Le fabricant n'est pas responsable des toutes interférences radio ou télévision causées par des modifications non autorisées apportées à cet appareil. De telles modifications peuvent empêcher l’utilisateur d’utiliser l'appareil. FCC Note: This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. le dispositif de a été évalués à répondre général rf exposition exigence.pour maintenir la conformité avec les directives d'exposition aux rf, ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps.

Navigation menu