RDI Technology ULC58 LightCAM User Manual BW2101 OM Warr upd 30Sep11

Download:
Mirror Download [FCC.gov]
Document ID	3098580
Application ID	2rgXLXDBnG4up6ypXQXYIA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	121.45kB (1518160 bits)
Date Submitted	2016-08-15 00:00:00
Date Available	2016-08-15 00:00:00
Creation Date	2016-07-14 22:17:26
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-08-12 16:03:46
Document Title	BW2101 OM_Warr upd_30Sep11
Document Creator	Adobe InDesign CC 2015 (Macintosh)

ULC58
Owner’s Manual
For use with UDR777HD
UDR780HD
© 2016 Uniden America Corporation
Irving, Texas
Issue 1, July 2016
Printed in China
CUSTOMER CARE
At Uniden®, we care about you!
If you need assistance, please do NOT return this product to your place of
purchase. Quickly find answers to your questions by:
1. Reading your owner’s manual, included with this product.
2. Visiting our customer support website at www.uniden.com.
Uniden surveillance products are not manufactured and/or sold with the intent to
be used for illegal purposes. Uniden expects customers’ use of these products
to be in compliance with all local, state, and federal law. For further information
on video surveillance and audio recording legal requirements, please consult
your local, state, and federal law.
© 2016. All rights allowed by law are hereby reserved.
IMPORTANT SAFETY PRECAUTIONS
##This manual contains important information about this product’s
operation. If you are installing this product for others, you must leave this
manual or a copy with the end user.
When using your equipment, always follow basic safety precautions to reduce the
risk of fire, electric shock, and injury to persons, including the following:
xx The camera has an IP65 weather rating. Water can be sprayed on them and they
will still work; however, the cameras cannot be submerged underwater.
xx Although the camera can be exposed directly to the rain, it is recommended that,
if it is used outdoors, it should be mounted under some type of cover like a patio
overhang or eave. As rainwater drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared LEDs used for night vision, thus
causing lower quality video.
xx To avoid any risk of electric shock from lightning, avoid handling any electronic
devices (except battery-powered ones) during an electrical storm.
xx Use only the power cord indicated in this manual.
xx Never tug or pull on any power cord; be sure to leave some slack in the cord when
placing your equipment, and always use the plug to unplug cord from the wall
outlet.
xx Never leave the power cord where it can become crushed, cut, or frayed; when
running power cords, avoid letting it rub against any sharp edges or lie across any
high traffic areas where people might trip over it.
xx Do not use the device if the adapter cord or plug has been damaged or if the
camera has been dropped or is damaged.
xx WARNINGS TO PARENTS AND OTHER USERS
Failure to follow these warnings and the assembly instructions could result in
serious injury or death. This product is not designed or intended for use as a
medical monitor, nor should this product be used as a substitution for medical or
parental supervision. Always be sure that both the transmitter and receiver are
working properly, and are within range of each other.
xx STRANGULATION HAZARD. Keep the adapter cords out of the reach of children.
xx WARNING: KEEP OUT OF THE REACH OF CHILDREN. This product is not a toy
and is not intended for use by any children under the age of 13. If you are between
the ages of 13 and 18, review these terms, conditions and safety warnings with
your parents or guardian to make sure that you and your parent or guardian
understand these terms, conditions, and safety warnings.
xx Allow for proper ventilation when units are in use. Do not cover the camera or
receiver with any object such as a blanket. Do not place it in a drawer or in any
location which would muffle the sound or interfere with the normal flow of air.
SAVE THESE INSTRUCTIONS!
For best results:
To avoid damage to your equipment, follow these simple precautions:
xx Do not drop, puncture or disassemble any part of the equipment. There are no
user-serviceable parts inside.
xx Do not expose the equipment to high temperatures, and avoid leaving the equipment in direct sunlight for more than a few minutes. Heat can damage the case or
electrical parts.
xx Do not place heavy items on top of the equipment or expose the equipment to
heavy pressure.
xx Remove the power adapter during long periods between usages.
xx Clean only with a dry cloth.
Failure to follow the instructions in this operating manual will void the
warranty. Uniden assumes no liability for damages to property or injury to
persons caused by improper handling or failure to comply with these safety
instructions.
ULC58 LIGHT CAMERA
The ULC58 Light Camera is an accessory camera for either the UDR777HD
or UDR780HD systems.
WHAT’S IN THE BOX
•
•
•
•
•
Digital Wireless Camera with stand (1)
AC Adapter for Camera (1)
Mounting screws and anchors (1 set)
Antenna (1)
Owner’s Manual (1)
##If any items are missing or damaged, visit our website for assistance www.uniden.com.
PARTS OF THE CAMERA
No. What it does
Camera Antenna: Sends and receiveds signals to/from the monitor.
Pair Button: The pair button is located on the back of the camera. It is used
to pair the camera with monitor.
Microphone: Transmit audio to monitor.
Camera Lens: Catches the video in front of the lens and transmits video from
camera to monitor.
PIR Sensor: Detects motion in front of the lens and emits detection signal to
transmitter.
Speaker: Produces the sound transmitted from the monitor.
IR LED: Infrared LED improves viewing in low/no light conditions.
6 white LEDs turn on when motion is detected or when a preset time range
begins.
##This camera includes an auto mechanical IR cut filter. An audible clicking
sounds when the camera changes between day and night modes.
SET UP THE ULC58 CAMERA
Basic steps to install and set up the ULC58 camera are:
1. Update the UDR system firmware for the ULC58 camera.
2. Pair the ULC58 camera to the UDR system.
3. Install the ULC58 camera.
4. Set ULC58 camera paramaters.
UPDATE MONITOR FIRMWARE FOR ULC58
Go to www.uniden.com and search for the ULC58 product page. Follow the
instructions to update your monitor.
1. Eject the SD card from the monitor.
2. Insert the SD card into the SD card adapter (included) and then insert it into
your PC. If your PC does not have an SD card slot, you will need to use an SD
card to USB adapter (not included).
3. Go to www.unidenvideo.com.
4. Copy UDR780HD firmware to the SD card.
5. Remove the SD card and reinsert it into the monitor.
6. From General Settings, tap Firmware Upgrade/From SD Card. The UDR780HD
reboots and upgrades the firmware. After the upgrade is complete, a Light
Settings tab replaces the Playback tab.
##Once you add the ULC58 camera to your system, you need to access the
Playback screens differently. Tap the SD Card icon (
). The Recording
File List screen displays. See the UDR780HD Owner’s Manual for details.
PAIR ULC58 TO UDR SYSTEM
Pair the camera to the monitor before you install it. Once the camera is paired,
the monitor displays live video from it. This live video will help you position the
camera for the best viewing angle.
Tap the following icons as they
appear on the monitor screens:


This screen should display:

1. Attach the camera’s antenna and plug the camera into power.
2. Tap Pairing on the Camera Setup screen.
3. Tap the channel number you want to pair the camera to.
4. A message displays with instructions to press the PAIR button on the camera.
A 30-second countdown begins. Press and release the PAIR button on the
back of the camera (see page 5).
##You must press the PAIR button on the back of the camera during the
30-second countdown; otherwise, the camera will not be paired.
5. The system displays live video 3 seconds after the camera is successfully
paired.
INSTALL THE ULC58
When you are positioning the camera, bring the monitor along; it’s much easier
to find the best viewing angle when you have the display handy.
##The monitor’s battery will last about 2 hours on its own.
1. Position the camera where you want it, plug it into power, and check video on
the monitor. Move the camera if the view is not what you want.
2. Hold the base of the camera stand where you want to mount it and mark the
location of the screw holes.
3. Use the included screws and anchors to attach the base to the wall or ceiling.
4. Tug gently on the stand to make sure it is securely in place.
SET ULC58 PARAMETERS
The Light Settings on the main screen tab lets you:
•
•
•
Set how long the light will be on once it is activated
Set a timer for the light to be on during a specified time period
Dim the light intensity
Duration
The Duration option allows you to set the length of time the light stays on after it
is triggered. Options are 1, 3, or 10 minutes, or Off.
Timer
The Timer option lets you set a start and end time for the light camera to turn
itself on and off.
Dimmer
The Dimmer option lets you set how strong the LED lights will display. Options
are 25%, 50%, 75%, and 100%.
PRODUCT SPECIFICATION
Camera Specifications
Image Sensor
1/2.7 inch FHD Single chip CMOS Image Sensor
Effective Pixel Area
1920 (H) x 1080 (V)
Image Processing Format
H.264
Image Resolution / Frame
Rate
Full High Definition 1080p (FHD) @10fps / High
Definition 720p @ 24fps
Lens
3.6mm F1.8
Low Light Resolution
<8~15 lux IR on
Low Light Solution
1 SMT IR LED, 1 low light sensor
Night Vision
Up to 30 feet
IR cut filter
Yes
Viewing Angle / Field of
View
92°
Automatic Gain Control
Auto
Automatic Electric Shutter
(AES) Speed
1/10 ~ 27/100 Second
White Balance
Auto
Power Requirement
9V 2A DC +/-10%
Power Consumption
1680mA Max (with IR LED and white LEDs on)
Operating Temperature
Range
+14° F to 122° F
(-10° C to +50° C)
Operating Humidity Range
0%~ 85%
Dimensions
8.3 x 3.2 x 3.6 in
(211 x 82 x 93mm)
Environment Rating
IP65
RoHS Compliance
(Hazardous Substances)
Yes
FCC ID
SJ8ULC58
IC ID
7644A-ULC58
Camera Housing Material
Metal
Recycling and Disposal Information
xx Do not dispose of electronic devices or any of their components (especially batteries and LCD displays) in your municipal trash collection.
xx Consult your local waste management authority or a recycling organization like
Earth911.com to find an electronics recycling facility in your area.
FCC Compliance Information
FCC Part 15 Compliance
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
Avis de conformité à la FCC : Ce dispositif a été testé et s’avère conforme à
l’article 15 des règlements de la Commission fédérale des communications
(FCC). Ce dispositif est soumis aux conditions suivantes: 1) Ce dispositif ne doit
pas causer d’interférences nuisibles et; 2) Il doit pouvoir supporter les parasites
qu’il reçoit, incluant les parasites pouvant nuire à son fonctionnement.
Tout changement ou modification non approuvé expressément par la partie
responsable pourrait annuler le droit à l’utilisateur de faire fonctionner cet équipement.
IC Compliance
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
Cet appareil est conforme aux normes RSS exemptes de licences d’Industrie
Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet
appareil ne doit pas causer d’interférences nuisibles et (2), il doit pouvoir accepter les interférences, incluant celles pouvant nuire à son fonctionnement normal.
Tout changement ou modification non approuvé expressément par la partie
responsable pourrait annuler le droit à l’utilisateur de faire fonctionner cet équipement.
One-Year Limited Warranty
##Important: Evidence of original purchase is required for warranty
service.
WARRANTOR: Uniden America Corporation (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden
Product to be free from defects in materials & craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate & be
of no further effect 12 months after the date of original retail sale. The warranty is
invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies,
or any configurations not sold by Uniden, (C) improperly installed, (D) serviced
or repaired by someone other than an authorized Uniden service center for a
defect or malfunction covered by this warranty, (E) used in any conjunction with
equipment or parts or as part of any system not manufactured by Uniden, or (F)
installed or programmed by anyone other than as detailed by the owner’s manual
for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit & return it to you without charge for parts,
service, or any other cost (except shipping & handling) incurred by warrantor or
its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE
WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES
NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this
exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.
10
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also
have other rights which vary from state to state. This warranty is void outside the
United States of America & Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging).
Disconnect the battery from the Product & separately secure the battery in its
own separate packaging within the shipping carton. The Product should include
all parts & accessories originally packaged with the Product. Include evidence of
original purchase & a note describing the defect that has caused you to return it.
The Product should be shipped freight prepaid, by traceable means, to warrantor
at:
Uniden America Service
C/O Saddle Creek
743 Henrietta Creek Rd. , Suite 100
Roanoke, TX 76262
11
IC Caution:
IC Note : Cet appareil est conforme à la Partie 15 des règlements de la FCC et aux normes RSS de
l’Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet
appareil ne doit pas causer des interférences nuisibles, et (2) cet appareil doit accepter toute
interférence reçue, y compris les interférences qui peuvent provoquer un fonctionnement
indésirable.
Le fabricant n'est pas responsable des toutes interférences radio ou télévision causées par des
modifications non autorisées apportées à cet appareil. De telles modifications peuvent empêcher
l’utilisateur d’utiliser l'appareil.
FCC Note:
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or change to this equipment. Such modifications or change could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and
your body.
le dispositif de a été évalués à répondre général rf exposition exigence.pour maintenir la
conformité avec les directives d'exposition aux rf, ce matériel doit être installé et exploité à une
distance minimale de 20 cm entre le radiateur et votre corps.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : BW2101 OM_Warr upd_30Sep11
Creator                         : 
Subject                         : 
Create Date                     : 2016:07:14 22:17:26-04:00
Metadata Date                   : 2016:08:12 16:03:46+08:00
Modify Date                     : 2016:08:12 16:03:46+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:bd1212bc-d358-4267-83af-a737d4819589
Original Document ID            : xmp.did:09801174072068119D08D06261A6EEC5
Document ID                     : xmp.id:abe63eda-6a20-457f-afb2-5d85be8831a8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:BF571EC1D549E611AB478F79998F3610
Derived From Document ID        : xmp.did:BF571EC1D549E611AB478F79998F3610
Derived From Original Document ID: xmp.did:09801174072068119D08D06261A6EEC5
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:07:14 22:17:26-04:00
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 12
Language                        : en-US
Author                          : 

EXIF Metadata provided by EXIF.tools