REYAX TECHNOLOGY RR10 RFID Reader Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1820929
Application ID	DPVK4RbbyCixhNEFDw5DfA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	109.68kB (1371030 bits)
Date Submitted	2012-10-23 00:00:00
Date Available	2013-01-13 00:00:00
Creation Date	2012-10-22 18:03:07
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2012-10-22 18:03:07
Document Title	user manual
Document Creator	PScript5.dll Version 5.2.2

REYAX RR10
RFID HF Reader Module
User’s Guide
1.Operational Description
The RR10 RFID solution is compliant with NFC forum standard for Reader mode
which supports ISO15693 and ISO14443A/B protocols. It’s very easy to connect to
any host with UART interface as PC, PDA and mobile phone.
2.1 Hardware Install
Please insert the cable to the RR10.
The other side insert to the USB interface.
2.22 Softwarre install
Belo
ow sectionss introducess the steps tto setup demo applicattions and drrivers.
Pleaase follow below
steps to install deemo applicaation.
■ Unplug RFID HF device
e from USB port.
■ Double‐Clicck “RFID_NFFC_Install.exxe” under “.\Demonstr
“
ration\Winddows\BCB”
h. And follo
ow the stepss to comple te
path
the installation
n.
■Iff you ever in
nstalled RFID HF Demoo Application, the uninsstall processs will be
laun
nched first.
Now
w, the installlation process is launched.
▓Laaunch demo applicatio
on by doubl e click “RFID NFC Demo” shortcutt on desktop. In
the main screeen, the “Stattus” area in forms you the
t physicall link status between PC
and
d RR10. The default inte
erface is RS‐‐232(UART)).
3. O
Operatio
on
3.11 Read Taags
■ Launch reader mode demo
form by clicking “Mode”‐>”R
“
Reader”. Thhen the read
der
de demo form will be shown
as
mod
belo
ow. The RFID protocol can
c be sele cted from “Protocol”
“
area.
Cho
oose “Inventtory” page and put taggs near RR10
0D1 Click “SStart” buttoon to findingg
tagss continuou
usly
Clicck “Stop” button to
o stop.
Clicck “Clear”
” button to clear tag i nformation
n.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
QLY-RR10 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19
statement has to also be available on the label: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference
and (2) this device must accept any interference received, including interference that may cause
undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2012:10:22 18:03:07+08:00
Modify Date                     : 2012:10:22 18:03:07+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:426e9110-aa4f-4b16-96c3-7a73048070d3
Instance ID                     : uuid:4f734c28-74b9-4bb0-a15c-058d2b6ad34d
Page Count                      : 11

EXIF Metadata provided by EXIF.tools