RF Link Technology UM01Y WLAN 11n USB module User Manual WL DM01R 7601 V2 0 SPECIFICATIONS 20170316

Download:
Mirror Download [FCC.gov]
Document ID	3389834
Application ID	AJWKbg2ciPrZ8wxBmbWwPg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.64kB (782986 bits)
Date Submitted	2017-05-14 00:00:00
Date Available	2017-05-14 00:00:00
Creation Date	2017-03-16 16:29:09
Producing Software	pdfFactory Pro 3.52 (Windows 7 Professional x64 Chinese (Simplified))
Document Lastmod	2017-05-14 22:02:53
Document Title	WL-DM01R-7601-V2.0 SPECIFICATIONS 20170316
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	Administrator

SPECIFICATIONS
IEEE 802.11 b/g/n 2.4GHz 1T1R
Wi-Fi 1T1R Module
WL-DM01R-7601-V2.0
(DANGLE module)
Version 2.0
http://www.rf-link.com/
1 / 12
Contents
1. Change History of Revision.....................................................................................................3
2. Overview...........................................................................................................................................4
3. Features...........................................................................................................................................4
4. Applications........................................................................................................................................5
5. General Specification..........................................................................................................................5
6. Block Diagram...............................................................................................................................6
7. Electrical Specifications.......................................................................................................................6
8. Pin Definition........................................................................................................................8
9. Size reference.............................................................................................................................9
10. USB interface electrical characteristics.....................................................................................10
11. Recommended Reflow Profile...............................................................................11
12. FCC modular＆nbsp................................................................................................................13
http://www.rf-link.com/
2 / 12
Change History of Revision
Revisio
Date
2.0
2017-03-16
http://www.rf-link.com/
Contents of Revision Change
首次发布产品规格书
3 / 12
Remark
2017-03-16
1. Overview
The UM01C-7601 is a highly integrated Wi-Fi module which supports
150 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE
802.11 b/g standards, offering feature-rich wireless connectivity.At high
standards,and delivering eliable,cost-effective throughput om an extended
distance.Optimized RF architecture and baseband algorithms provide
superb performance and low power consumption. Intelligent MAC design
deploys a high efficient DMA engine and hardware data processing
accelerators which offloads the host processor.The MT7601 is designed
to support standard based features in the areas of security, quality of
service and international regulations,giving end users the greatest
performance any time and in any circumstance.
2. Features
l IEEE 802.11 b/g/n client
l Embedded high-performance 32-bit RISC microprocessor
l Highly integrated RF with 55nm CMOS technology
l 1T1R mode with support of 150Mbps PHY rate
l Integrate high efficiency switching regulator
l Best-in-class power consumption performance
l Compact 5mm x 5mm QFN40L package
l 1/2/3/4-wire PTA Wi-Fi / Bluetooth coexistence support
http://www.rf-link.com/
4 / 12
l 802.11 d/h/k compliant
l Security support for WFA WPA/WPA2 personal, WPS2.0, WAPI
l Supports 802.11w protected managed frames
l QoS support of WFA WMM, WMM PS
l Supports Wi-Fi Direct
l Fully compliance with USB v2.0 High-speed mode
l Per packet transmit power control
l Antenna diversity
l Auto-calibration
3. Applications
l Desk-Top PC
l TV
l Blue-ray Disk
l Set-top box
4. General Specification
Model
WL-DM01R-7601-V2.0
Product Name
WLAN 11n DANGLE module
Major Chipset
MTK 7601
Standard
802.11b/g/n
Data Transfer
Rate
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and
maximum of 150Mbps
http://www.rf-link.com/
5 / 12
Modulation
Method
Frequency Band
Spread Spectrum
Operation Mode
Operation Range
BPSK/ QPSK/ 16-QAM/ 64-QAM
802.11b/g/n(H20)2412-2462MHz,11n(H40)2422-2452MHz
IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum)
IEEE 802.11g/n:OFDM (Orthogonal Frequency Division
Multiplexing)
Ad hoc, Infrastructure
Security
Up to 180 meters in open space
Windows 2000,XP32-64,Vista 32/64,Win7
32/64,Linux,Mac, Android, WIN CE
WEP, TKIP, AES, WPA, WPA2
Interface
USB 2.0
Power
Consumption
DC 3.3V
OS Support
Operating
Temperature
Storage
Temperature
Humidity
Dimension
0 ~ +70° C ambient temperature
-10 ~ 80°C ambient temperature
5 to 90 % maximum (non-condensing)
40 x 33 x 7.7mm (LxWxH) +-0.2MM
5. Block Diagram
6. Electrical Specifications
1) DC Characteristics
Current Consumption
TX Mode
http://www.rf-link.com/
Min.
Typ.
Max.
Unit
110
mA
6 / 12
2) RF Characteristics for IEEE802.11b
( 11Mbps mode unless otherwise specified)
Items
Contents
Specification
IEEE802.11b
Mode
CCK
Channel frequency
2412MHZ-2462MHZ
Data rate
1,2,5.5,11Mbps
RX
-85 dBm
(per≤85 dBm@8%)
TX Characteristics
Min.
Typ.
Max.
Unit
Power Level (17±2dBm)
17
dBm
EVM (≤-18)
-18
dB
3) RF Characteristics for IEEE802.11g ( 54Mbps mode unless otherwise specified)
Items
Contents
Specification
IEEE802.11g
Mode
OFDM
Channel frequency
2412MHZ-2462MHZ
Data rate
6,9,12,18,24,36,48,54Mbps
RX (per≤70 dBm@10%)
-70 dBm
TX Characteristics
Power Level
Min.
Typ.
(14±2dBm)
EVM (≤-25)
Max.
Unit
14
dbm
-28
dm
4) RF Characteristics for IEEE802.11n (BW20_MCS7)
Items
Contents
Specification
IEEE802.11n
Mode
BW20_MCS7 65 Mbps
Channel frequency
2412MHZ-2462MHZ
RX (per≤65 dBm@10%)
-65 dBm
TX Characteristics
Power Level
Min
Typ
(13±2dBm)
EVM (≤-28)
http://www.rf-link.com/
7 / 12
Max
Unit
13
dbm
-28
dm
5) RF Characteristics for IEEE802.11n (BW40_MCS7)
Items
Contents
Specification
IEEE802.11n
Mode
BW40_MCS7 135 Mbps
Channel frequency
2422MHZ-2452MHZ
RX (per≤65 dBm@10%)
-65 dBm
TX Characteristics
Power Level
Min.
Typ.
(13±2 dBm)
EVM (≤-28)
Definition
dBm
-28
dB
Description
GND
Ground
HSDM
USB D-
HSDP
USB D+
5V
VDD3.3V±0.1V
NC
NC
http://www.rf-link.com/
8 / 12
Unit
13
7. Pin Definition
Pin
Max.
The picture of top
The picture of bottom
8.Size reference
Dimensions
(mm)
Length
Width
Height
40
33
7.7
(Tolerance:±0.2mm)
(Tolerance:±0.2mm)
(Tolerance:±0.2mm)
The PCB tolerances within + / -0.2 or so
http://www.rf-link.com/
9 / 12
9.USB interface electrical characteristics
10.Recommended Reflow Profile
Referred to IPC/JEDEC standard.
Peak Temperature : <250°C
Number of Times : ≤2 times
http://www.rf-link.com/
10 / 12
ENVIRONMENTAL
Operating
Operating Temperature:
0°C to +70 °C
Relative Humidity:
5-90% (non-condensing)
Storage
Temperature:
-10°C to +80°C (non-operating)
Relevant Humidity:
5-95% (non-condensing)
11. RoHS compliance.
This product is RoHS compliance.
12.Wifi 模块贴片装机前注意事项：
12.Wireless module before the SMT note:
1.When customers Open stencil must be sure the
hole bigger to the Wireless module plate, please
1.客户在开钢网时一定要将 wifi 模块焊盘的孔开大，请按 1
press 1 to 1 and 0.7 mm is widened to open outward,
比 1 再向外扩大 0.7mm 比例开钢网，厚度按 0.12mm.
the thickness of 0.12 mm.
2.有需要拿 wifi 模块时不可以光手去拿，一定要戴上手套以
2.Can't get the wifi module bare hands when
及静电环.
needs,must we wear the gloves and static ring.
3.过炉温度要根据客户主板的大小而定，一般像平板电脑上
3.The furnace temperature according to the size of
的标准温度为250+-5°，也可以做到260+-5°
the customer the mainboard ,generally like to stick on
a tablet standard temperature of 250 + - 5,can do 260
Wifi 模块储存及使用管制应注意事项如下：
+ - 5.
Storage and use Wifi module control should pay
1.模块的真空包装之储存期限：
attention to the following matters:
1-1.保存期限：12个月，储存环境条件：温度在：<40℃，相
Module of the storage life of vacuum
对湿度：<90%R.H.
packaging：
1-1.Storage
life
：
12
months.
Storage
1-2.模块包装被拆后，SMT 组装之时限：
conditions:<40℃. Relative humidity:<90%R.H.
1-3. 检 查 湿 度 卡 ： 显 示 值 应 小 于 30% （ 蓝 色 ）， 如 ：
1-2.After this bag is opened , devices that will be
30%~40%(粉红色）或者大于40%（红色）表示模块已吸湿
subjected to infrared reflow, vapor-phase reflow, or
气.
① 工厂环境温度湿度管制：≦30%℃，≦60%R.H。
equivalent processing must be :
② 拆封后，车间的保存寿命为 168 小时.
1-3.Check
≦ 20%RH.If
the
humidity
card
:30%~40%(pink)or
:stored
greater
at
than
40%(red).Labeling module has moisture absorption.
① Mounthed within 168 hours at factory
http://www.rf-link.com/
1-4.如在拆封后的 168 个小时内未使用完，需要烘烤，烘烤
条件如下：
① 模块须重新烘烤，以除去模块吸湿问题.
② 烘烤温度条件：125℃，8 小时.
11 / 12
conditions of: t≦30%℃，≦60%R.H.
② Once
opened,
the
③ 烘烤后，放入适量的干燥剂再密封包装.
workshop
the
1-5. 模块真空包装数量以客户要求的实际包装数量为准，真
空包装图片<1>
preservation of life for 168 hours.
1-4.If baking is required,devices may be baked for:
① Modules must be to remove module
moisture problem.
2.模块卷盘包装事项如下：
② Baking temperature: 125 ℃, 8 hours.
③ After
baking,
put
proper
amount
2-1.保存期限：12个月，储存环境条件：温度在：<40℃，相
of
desiccant to seal packages.
对湿度：<90%R.H.
2-2.模块拆开包装168小时后，如要上线贴片需要重新烘烤，
1-5. The actual number of module vacuum packing
以除去模块吸湿问题，烘烤温度条件：125℃，8小时。
which is based on the actual number of packages to
2-3. 模块卷盘包装以客户要求的实际包装数量为准,卷盘包
the customer requirements, vacuum packing of
装图片<2>
picture<1>
2.Module reel packaging items as follows.
2-1.Storage
life
：
12
months.
3.模块托盘包装事项如下：
Storage
3-1.保存期限：3个月，储存环境条件：温度在：<40℃，相
conditions:<40℃. Relative humidity:<90%R.H.
对湿度：<90%R.H.
2-2.Module apart packing after 168 hours，To launch
3-2.模块如在 48 小时内未使用，在上线之前需要进行烘烤，
patch need to bake, to remove the module
烘烤温度条件：125℃，8 小时。
hygroscopic, baking temperature conditions：125℃，
3-3. 托盘包装每盘为 100pcs，模块托盘包装以客户要求的
8hours.
实际包装数量为准.
2-3. The actual number of
module reel packing
which is based on the actual number of packages to
the
customer
requirements,
Reel
packing
注：以上包装方式根据客户要求而定，包装以实际出货为准。
of
picture<2>
3.Module pallet packaging items as follows：
3-1.Storage life：3 months. Storage conditions:<40℃.
Relative humidity:<90%R.H.
3-2.Module if not used within 48 hours, before launch
the need for baking, baking temperature: 125 ℃, 8
hours.
3-3. Pallet packaging each plate is 100 PCS.The
actual number of
module pallet packing which is
based on the actual number of packages to the
customer requirements.
http://www.rf-link.com/
12 / 12
12. FCC modular＆nbsp
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The modular can be installed or integrated in mobile or fix devices only. This modular cannot be
installed in any portable device, for example, USB dongle like transmitters is forbidden.
FCC Radiation Exposure Statement
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This modular must be installed and operated with a minimum
distance of 20 cm between the radiator and user body.
If the FCC identification number is not visible when the module is installed inside another
device, then the outside of the device into which the module is installed must also display a label
referring to the enclosed module. This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: 2AGQ3UM01Y Or Contains FCC ID:
2AGQ3UM01Y”
When the module is installed inside another device, the user manual of the host must contain
below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The devices must be installed and used in strict accordance with the manufacturer's instructions
as described in the user documentation that comes with the product.
Any company of the host device which install this modular with limit modular approval should
perform the test of radiated emission
and spurious emission according to FCC part 15C : 15.247 and 15.209 requirement, Only if the
test result comply with FCC part 15C : 15.247 and 15.209 requirement，then the host can be
sold legally.
http://www.rf-link.com/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Administrator
Title                           : WL-DM01R-7601-V2.0 SPECIFICATIONS 20170316
Create Date                     : 2017:03:16 16:29:09+08:00
Creator Tool                    : pdfFactory Pro www.fineprint.cn
Modify Date                     : 2017:05:14 22:02:53+08:00
Metadata Date                   : 2017:05:14 22:02:53+08:00
Producer                        : pdfFactory Pro 3.52 (Windows 7 Professional x64 Chinese (Simplified))
Document ID                     : uuid:3833a0db-5c84-4ca4-87ff-8ebeff23fa28
Instance ID                     : uuid:48c999e9-021c-48e9-b3a6-da12d574078d
Page Count                      : 13
Author                          : Administrator

EXIF Metadata provided by EXIF.tools