RFID HKRAR001 WIRELESS 2.4GHz ACTIVE RFID READER User Manual 16 May 2007

Hong Kong RFID Ltd. WIRELESS 2.4GHz ACTIVE RFID READER 16 May 2007

Users Manual

Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.1 Installation Guide for EMPRESS™ 2.4GHz Active RFID Reader (Model: HKRAR-EMWF) Revision: 1 Before use, please read these instructions completely
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.2 Disclaimer The information and know-how included in this document are the exclusive property of Hong Kong RFID Limited and are intended for the use of the addressee or the user alone. The addressees shall not forward to another their right of using the information, know-how or document forwarded herewith, in whole or in part in all matters relating or stemming from or involved therein, where for consideration or with consideration, and shall not permit any third party to utilize the information, know-how or the documents forwarded herewith or copies or duplicated thereof, unless at the company’s consent in advance and in writing. Enterprise License No part of this document may be reproduced, distributed, publicized or made publicly available in part or in total without prior written consent of Hong Kong RFID Ltd. All content herein is solely owned by Hong Kong RFID Ltd. All inquires should be directed to info@hk-rfid.com Important Notice All statements, technical information, and recommendations related to Hong Kong RFID’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of Hong Kong RFID. EMPRESS is a trademark of Hong Kong RFID.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.3 Contents 1.1 INTRODUCTION ...............................................................................................................................4 1.2 SYSTEM OVERVIEW ........................................................................................................................5 1.2.1 Components ...............................................................................................................................5 1.2.2 Setup ..........................................................................................................................................7 1.2.3 Application: Access Control System ..........................................................................................8 1.2.4 Application: Location System ....................................................................................................8 1.3 READER INDICATORS ......................................................................................................................9 1.3.1 Omni–directional Antenna for Empress Active Reader ........................................................... 10 1.3.2 Directional Antenna for Empress Active Reader (Optional) .................................................... 10 1.4 FIRST TIME INSTALLATION: ........................................................................................................... 13 1.5 WIRELESS CONNECTION CONFIGURATION GUIDE ......................................................................... 18 1.5.1 Briefly description ................................................................................................................... 18 1.5.2 Status-system ........................................................................................................................... 19 1.5.3 Status-Active Client ................................................................................................................. 19 1.5.4 Network Setting ........................................................................................................................ 20 1.5.5 Wireless Setting ........................................................................................................................ 21 1.5.6 Access Point Setup ................................................................................................................... 22 1.5.7 Client Mode Setup.................................................................................................................... 26 1.5.8 Security .................................................................................................................................... 27 1.5.9 Others ...................................................................................................................................... 29 1.6 COMPUTER SOFTWARE INSTALLATION .......................................................................................... 32 1.7 DEMO SOFTWARE USER GUIDE ..................................................................................................... 33
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.4 1.1 Introduction Thank you for purchasing EMPRESS™ Reader, it is wireless and therefore is easy to install with low installation costs. It is a 2.4GHz Gain Adjustable Reader which uses the advanced 0.18um CMOS IC, and is well-fitted for being a Data Collector. Through IEEE 802.11b/g (EMWF version), the reader gathers and transmits data to the wireless router or act as access point all by itself. Once powered, the HKRAR-EM series is instantly connected and become part of the network. HKRAR-EMWF Active reader is user friendly with a web interface. You can get data and do analysis with a PC in an efficient way with its Wi-Fi feature. Its Omni-directional antenna can identify tags from all directions. Users can adjust the identification distance according to actual situations in order to make identification more accurate.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.5 1.2 System Overview 1.2.1 Specification Direction Omni-directional, standard rubber antenna Range 30~50m (depends on different Active RFID Tags), Frequency 2.4GHz--2.5GHz ISM RF Output Power 0dBm Sensitivity -85dBm Power 500mA,5V Modulation GFSK Software Interface XtractorTM, .Net Platform Data Rate 1Mbps Operating Temperature -40~60`C Operating Humidity 95%(Non-condensing) Anti-collision 200 tags simultaneously, shown within 5 sec. Interface WI-FI, IEEE 802.11b/g. can act as AP Dimension 125mm * 108mm * 26mm PC or ControllerWireless RouterEmpress 2.4GHz Active ReaderDirectional or Omni-Directional AntennaActive TagsActive Tags broadcast Tag ID and listen for comments at defined time interval (e.g 1 signal per second) Active Tag ID and information passed to PC through reader itself or other network devices
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.6 1.2.2 Components One standard package of this product consists of following items; - EMPRESS Reader x 1 piece - 2.4GHz Antenna x 2 pieces - DC Power Adaptor 5V 2.5A x 1 piece - A Cross Cat-5 Cable (optional) Other Essential Components - Active Transponders from Hong Kong RFID - Personal Computer Minimum PC Requirements: XXXXXX NOTE: Active Transponders are essential to test the system and they are sold separately. Please contact your sales representative if you do not have any active transponders.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.7 1.2.3 Network Setup XXX mode XXX mode (external antenna for illustration) AP mode [Type sidebar content. A sidebar is a standalone supplement to the main document. It is often aligned on the left or right of the page, or located at the top or bottom. Use the Text Box Tools tab to change the formatting of the sidebar text box. Type sidebar content. A sidebar is a standalone supplement to the main document. It is often aligned on the left or right of the page, or located at the top or bottom. Use the Text Box Tools tab to change the formatting of the sidebar text box.]
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.8 1.2.4 Application: Access Control System AntennaReaderControllerComputerAutomatic DoorTagAccess Control System Fig.3 Overview of the access control system The system can control an automatics door to achieve the purpose of access control. The results of the reader captured are recorded in the Controller. 1.2.5 Application: Location System XXXXXX
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.9 1.3 Reader Indicators Name Function / Description 1 DC Power Jack Supply power 2 Red LED Power ON 3 Green LED Data processing identity 4 NETWORK Connect to PC to reader 5 RESET Reboot button Please hold the button for 5sec 6 Wifi For Wifi Antenna 7 ANT For any 2.4GHz antenna, directional or omi-directional 1 2 3 4 5 6 7
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.10 1.3.1 Omni–directional Antenna for Empress Active Reader This antenna detects all tags in range from all angles. Technical Specification: 1.3.2 Directional Antenna for Empress Active Reader (Optional) Directional antenna only detects tags in specific angle. Please note that the antenna has horizontal and vertical orientation. Frequency Range (MHz) 2400-2483 Bandwidth(MHz) 83 Gain (dBi) 8 VSWR <=1.5 Impedance (ohm) 50 Max. Power (W) 50 Connector N Female Dimension (mm) 145 x 97 x 38 Weight (g) 210
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.11 Long Range Directional 2.4GHz Antenna: HKRAA-2417 Electrical Specification Frequency Range 2400-2500MHz VSWR ≤1.5 Input Impedance 50Ω Gain 17dBi Polarization Type Vertical or Horizontal Hoizontal Plane ΘHP 20 ±2° Vertical Plane ΘHP 20 ±2° Front to Back Ratio ≥26dB Maximum Input Power 6W Connector Type N -Female Lightning Protection DC ground Mechanical Specifications Dimension 305mm ×305mm ×25mm Weight 1.5Kg Rated Wind Velocity 210km/h Radome material UV-Resistance ABS Working Temperature -40~60℃
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.12 Mid Range Directional 2.4GHz Antenna HKRAA-2414
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.13 1.4 First Time Installation: 1) Take out the reader from the box and connect the all two antenna (ANT and WiFi) at the back of the reader 2) Plug the power adapter in the power jack. The red LED will turn on. 3) Connect the reader to a PC with Cross Cat 5 cable 4) Open your web browser and type 192.168.1.254 (if cannot open the setting page, try to turn off other connections, e.g. WIFI) 5) A dialog box will prompt you for the User name and Password. Enter the default values and click OK. Default login of setup page user name: admin password : admin 6) Continue the following setting step, the setup page will be display after log-in.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.14 7) Select Network Setting on the left column. The LAN Interface Setup will display. 8) Select an idle IP address on your network and Enter in the IP Address. Enter the Subnet Mask and Default Gatway of your network. Disabled DHCP. Press Apply Changes. 9) Successful message will show and click new IP Address to continuous setting.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.15 NOTE: 1) skip from here on if new IP address is in same subnet of previous one Go the Start => settings => control panel => network connections. 2) Selection connection which connect to the reader. 3) Press properties 4) Select Internet Protocol(TCP/IP) and press properties 5) change the IP address which in the same domain with reader. 6) Press OK to close all the dialog. 7) Open Internet Explorer and type in the new IP address in the address field and press Enter
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.16 8) Select Wireless Setting on the left column. Operation Mode will show 9) Select Client and press Setup. It takes a moment applying the setting and Client Mode Setting will show. 10) Enter the SSID name in of your wireless network and press Apply Changes. 11) Press Security Setup. A Wireless Security Setup dialog will show. 12) Select your network authentication and Select/Enter according information. Press Apply Change.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.17 13) It takes a moment applying setting. 14) After loading the setting. Close the entire dialog. 15) All setting complete.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.18 1.5 Wireless Connection Configuration Guide 1.5.1 Briefly description < check the system status and reader configuration <check the all active client status < setting network config. e.g. IP address, subnet Mask, etc. < setting the operation mode and the wireless connection < setting the wireless connection security < select the country code < charge password < for user setup/check the log file of the reader < upgrade the firmware < to reset all setting to factory default setting < reboot the reader
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.19 1.5.2 Status-system It shows all the system information: firmware version, LAN configuration, WLAN configuration, Serial configuration. 1.5.3 Status-Active Client In this page, the information of clients connecting to WIZ610wi is displayed. If you click “Refresh” button, the client list and information are updated.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.20 1.5.4 Network Setting For user change the network setting of the reader. Name function IP Address Set the IP address to the reader Subnet Mask Set your network subnet mask to the reader Default Gateway Set the your network gateway to the reader DHCP: When the reader set as a server, you can set the reader activate the DHCP function. DHCP Client Range When the reader set as a server and DHCP function is on, user should set a range of IP address to the client for connection. Show Client To show the list of connected Clients
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.21 1.5.5 Wireless Setting It selects the operation mode of the reader and the setup the selected mode Mode Function Access Point In this mode, all ethernet ports and wireless interface are bridged together and NAT function is disabled. All the WAN related function and firewall are not supported.The wireless mode is AP mode. Gateway In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN ports share the same IP to ISP through WAN port. The connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client or static IP. Client Client-Infrastructure.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.22 1.5.6 Access Point Setup After selecting the AP mode and please click “Setup” button, Name Function Alias Name: Type in the reader name Band Select communication protocol SSID Input SSID for wireless communication. Channel Number: Select the channel frequency which you will use for wireless communication. Mode: Select the mode of the AP : set reader operates as Access Point. AP+WDS : WDS(Wireless Distribution System) repeater, this mode can let the reader communication each other. In this mode, the reader will also operate with AP mode in the same time. WDS-Mode: Select the master/ salve when WDS is set Security: Setting the wireless connection security Advanced Settings: Have a more advanced setting : Fragment Threshold, RTS Threshold,Preamble Type, Beacon Interval
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.23 -Fragment Threshold: This value specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor reduction of the default value is recommended. In most cases, it should remain as its default value of 2346. -RTS Threshold: When you encounter inconsistent data flow, only minor reduction of the default value, 2347, is recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router frames to a particular receiving of a data frame. After receiving responds with a Clear to Send right to begin transmission. The as its default value of 2347. -Beacon Interval: The default value is 100. Enter a value between 1 and 65,535milliseconds. The Beacon Interval value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router to synchronize the wireless network.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.24 Access Control: Setting the MAC address to allows or blocks clients access Disable: the wire access control mode Allow Listed: add the MAC address user in to allow mode Deny Listed: add the MAC address client into deny mode WDS Setting: If AP mode is set as WDS Repeater, WDS Setting button is activated. WDS is Wireless Distribution System that is working as a wireless bridge between AP and AP.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.25 DDNS: DDNS: Dynamic DNS is a service that provides you with a valid, unchanging, internet domain name (an URL) to go with that IP-address. You can apply one at www.no-ip.com.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.26 1.5.7 Client Mode Setup After selecting the Client mode and please click “Setup” button Name function Alias Name Type in the reader name Band Select communication protocol SSID Input SSID for wireless communication. Security Setting the wireless connection security Advanced Settings Have a more advanced setting : Fragment Threshold, RTS Threshold,Preamble Type, Beacon Interval WAN Port Setup the WAN Port DDNS DDNS: Dynamic DNS is a service that provides you with a valid, unchanging, internet domain name (an URL) to go with that IP-address. You can apply one at www.no-ip.com. Site Survey Look for the available wireless network
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.27 1.5.8 Security Setting the wireless connection security. Authentication Select the authentication of the network to connect the four selection: -Open system -Shared key -WPA-PSK -WPA2-PSK Encryption: Select the encryption of the network to connect the two selection: -TKIP_AES -WEP The encryption is TKIP_AES Encryption: TKIP AES Pre-Shared Key Format: Select the key format Pre-Shared Key: Enter the Key
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.28 The encryption is WEP Encryption: WEP Key Length: Select the key length : 64-bit or 128-bit Key Format: Select the key format: ASCII (5 characters) or Hex (10 characters) Default Tx Key: Selection the Default Key Encryption Key 1: Enter the key Encryption Key 2: Enter the key (if any) Encryption Key 3: Enter the key (if any) Encryption Key 4: Enter the key (if any)
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.29 1.5.9 Others Region Settings: - select the country code Password - for user to change the password(strongly recommended to set your user password for security issue. )
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.30 Log - For the administrator's to setup the log function and check system log file. Upgrade - for user to upgrade the firmware of the reader.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.31 Factory Default - to reset all setting to factory default setting Reboot - to reboot the reader
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.32 1.6 Computer Software Installation INSTALLATION STEPS 1) install the window .net framework 3.5 2) install the Xtractor Package 3) start the software PROCEDURE 1) Install the window .net framework 3.5(if you already install before, ignore this part). i. Double click the “WindowsInstaller-KB893803-v2-x86.exe” on the CD to process the installation 2) Install the Xtractor Package i. extract the file “Xtractor Package.zip” on the CD( you need a unzip software) ii. double click the “Installer.msi”to instal the Xtractor Package. 3) Start up the software i)double click “Demo_HKRRAR-EM.exe” to start the software.
Copyright© Hong Kong RFID Ltd. 2008, All rights reserved. Reproduction of any part is strictly prohibited. Hong Kong RFID Limited Add: Unit 207A, 2/F, Building 9, No.5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Tel: (852) 2165 4708 Fax: (852) 3007 1901 Email: info@hk-rfid.com P.33 1.7 Demo Software User Guide INSTALLATION STEPS 1) input the IP address of the reader in the IP field 2) input the port number of the reader( default is 5000) 3) press connect until the state bar show connected 4) press start read to receive tag information. And the state bar show the no. of tag received. 5) Press stop when you finish read the tag 6) you may clear the result window by clicking Clear Result and re-read the tag information 7) press disconnect to disconnect the reader
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. NOTE 3: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Navigation menu