RM Acquisition 1000AA TND Tablet User Manual manual

RM Acquisition LLC TND Tablet manual

UserManual.wiki >

RM Acquisition >

1000AA User Manual HTML Version

manual

This portable transmitter with its antenna has shown compliance with FCC’s SAR

limits for general population / uncontrolled exposure. The maximum listed SAR level

is0.512W/kg. The antenna used for this device must not be co-located or operating in

conjunction with any other antenna or transmitter

TND™ Tablet User Manual i

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and may cause harmful

interference to radio communications if not installed and used in

accordance with the instructions. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet that is on a different circuit

from the GPS unit.

•Consult the dealer or an experienced radio/TV technician for help.

IC Compliance Statement

This device complies with Part 15 of the FCC Rules and Industry Canada

license-exempt RSS standard(s). Operation is subject to the following

two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference

that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC Caution

Intentional or unintentional changes or modiﬁcations to the equipment

not expressly approved by Rand McNally could void the user’s authority

to operate the equipment.

IC attestation de conformité

Ce dispositif est conforme à la norme FCC Partie 15 et aux norme(s)

RSS permis-exempte(s) d’Industrie Canada. L’opération est soumise

aux deux conditions suivantes:

3. Ce dispositif ne peut pas provoquer d’interférence nocive et

4. Ce dispositif doit accepter toute interference reçue, y compris

les interférences qui peuvent causer un mauvais fonctionnement

du dispositif.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Attention

Les changements ou modiﬁcations à l’équipement, que ce soient

intentionnelles ou non, non expressément approuvés par Rand McNally

pourraient annuler l’autorisation de l’utilisateur à utiliser cet équipement.

IC: 10199A-01001A

onnect the equipment into an outlet that is on a different circuit

TND™ Tablet User Manual ii

About GPS

The Global Positioning System (GPS) is a constellation of satellites that

a GPS receiver uses to calculate geographical positions. To determine

a position, data from at least three satellites is required. To determine

elevation, the data from four or more satellites is required. Accuracy of

the positioning varies from 10 feet to several hundred feet, depending

on vehicle placement and the surrounding environment.

Geographical terrain (such as mountains), man-made structures (such as

highway overpasses, bridges, and tall buildings), as well as weather

can interfere with the GPS signal. For best GPS reception, position the

device and mount with a clear line of sight to the sky. Some vehicles

may have a limited view of the sky due to metal sun shields or a

metallized windshield coating.

Map data includes the geographical coordinates for address locations

and points of interest (POIs). With GPS reception, your device calculates

a route to your selected location.

Customer Support

Call toll-free:

800-333-0136

Service hours:

Monday through Friday, 7 a.m. to 6 p.m. CT

(Except ofﬁcial holidays)

E-mail:

TNDSupport@randmcnally.com

TND™ Tablet User Manual iii

Table of Contents

1. Your Device ...................................................................................................... 1-3

Safety Information ................................................................................................... 1

What’s Included .................................................................................................... 2

Install the Mount ...................................................................................................... 2

TND™ Tablet hardware .............................................................................................. 3

2. Getting Started ..................................................................................................4-9

Connecting to Wi-Fi ................................................................................................ 4

Registration ......................................................................................................... 4

Using Android ......................................................................................................... 5

Settings ...................................................................................................... 6-8

Main Menu ......................................................................................................... 9

3. Truck GPS .................................................................................................. 10-57

A. Main Menu .....................................................................................................11

B. Settings ...................................................................................................12-18

Guide to Truck Tools and Device Preferences ..................................................... 12

Truck Info ....................................................................................................... 13

Warnings ....................................................................................................... 14

General Preferences ..................................................................................... 15-16

Route Preferences ............................................................................................. 17

Map Preferences ............................................................................................... 18

C. Destinations ............................................................................................... 19-38

Helpful Tips ....................................................................................................... 20

New Location ............................................................................................... 21-24

Address Book ............................................................................................... 25-26

Multi-Stop Trips ............................................................................................ 27-29

Tap Map ....................................................................................................... 30

Avoid List ....................................................................................................... 31

Points of Interest (POIs) ................................................................................ 32-35

Local Search ...................................................................................................... 36

Conﬁrmation Windows ..................................................................................... 37

Toll Costs, Route Compare ................................................................................ 38

D. Maps & Routing ........................................................................................39-45

Route Map Window .......................................................................................... 39

Exits Quick View ................................................................................................ 40

Directions Slide-Out List ................................................................................... 41

Virtual Dashboard ........................................................................................ 42-43

Junction View, Turn View .................................................................................. 44

Location and Route Options .............................................................................. 45

E. Tools & Features .........................................................................................46-57

Weather ....................................................................................................... 46

Trafﬁc .................................................................................................. 47-48

Fuel Prices ....................................................................................................... 49

Truck Tools ....................................................................................................... 50

Timers ....................................................................................................... 51

Mileage ....................................................................................................... 52

Trails ....................................................................................................... 53

Fu el Logs ....................................................................................................... 54

Quick Planner .................................................................................................. 55

Road Atlas Information ...................................................................................... 56

Calendar ....................................................................................................... 57

Notepad ....................................................................................................... 57

Unit Converter ................................................................................................... 57

Calculator ....................................................................................................... 57

F. Tell Rand ....................................................................................................... 58

4. TripMaker® ....................................................................................................... 59

5. Motor Carriers’ Road Atlas ................................................................................ 60

6. Dash Cam ....................................................................................................... 61

7. Preloaded Apps ................................................................................................... 62

8. Rand McNally Market .......................................................................................... 63

9. More Information ................................................................................................ 64

TND™ Tablet User Manual 1

Caution: Important Safety Information

Navigation

• Use this device at your own risk.

• Use this device only when it is safe to do so.

• Look at the display only when it is safe to do so.

• Trafﬁc regulations always have priority over any instructions

from the navigation system.

• Follow navigation system instructions only when local regulations

and road trafﬁc allow you do so.

• Make sure that the mount is securely mounted and properly

adjusted before each trip.

• Note: If you do not understand the spoken instructions or are

unsure of what to do next, refer to the navigation map on your

navigation device.

Installation

• Make sure that the mount does not impair the driver’s visibility.

• Do not attach the mount within the airbag deployment zone.

• When installing the mount, make sure that it does not pose a risk

in the event of an accident.

• Do not run cables directly next to safety-relevant devices and

power supplies.

• After installation, check all safety-relevant equipment.

• Connect the wall charger to a 120V or 240V outlet only.

• Connect the vehicle charger to a 12V outlet only.

1. Your Device

Device

• Do not use sharp-edged objects on the device touch screen.

• The device is not waterproof and is not protected against

water damage.

• Protect the device from extreme temperatures. Operating

temperature for the device is between 32 degrees F and

120 degrees F.

• Do not open the navigation device casing.

• Do not attempt to replace the battery. Contact Rand McNally

Customer Support with questions about the battery.

• Always follow local regulations when disposing of this device.

• Note: Make sure that there are no kinks in the cable and that

it will not be damaged by any sharp objects.

• Note: Use only a moist cloth to clean the navigation device.

• Note: Do not pull the cable to unplug the unit.

TND™ Tablet User Manual 2

What’s Included

Rand McNally TND™ Tablet

• Two-piece mount:

- Magnet with GPS boost

- Bracket with suction cup

• Quick Start Guide

• Anti-glare screen protector

• Vehicle charger

• Wall charger

• USB cable

1. Your Device

Install the Mount

Note: Follow all local regulations governing the placement of the mount.

1. Select an area with a line of sight to the sky and GPS satellites.

2. Clean and dry the mounting area.

3. Remove the suction cup protective ﬁlm.

4. Attach the two pieces of the mount together.

5. Adjust the angle of the mount.

6. Pull the suction cup lever up to release suction.

7. Plug the power cord into the mount and the vehicle’s 12-volt

power source.

8. Place and hold the mount suction cup against the

mounting surface.

9. Press the suction cup lever down until it snaps into place.

10. Snap the tablet onto the mount.

11. Adjust the tablet so that it can be easily seen and does not

block the driver’s line of sight.

TND™ Tablet User Manual 3

1. Your Device

Main Menu

Volume

Down Up Power Dash cam

Mini HDMI

(video out)

Micro USB

(power)

SD card

Audio out

Micro USB

(power)

Video in

TND™ Tablet Hardware

TND™ Tablet User Manual 4

2. Getting Started

Connecting to Wi-Fi

When you ﬁrst turn on your tablet, you’ll be asked to select a Wi-Fi

network to connect to the Internet. A Wi-Fi connection is required

to browse the web, download apps, and use Internet-enabled features

such as weather and trafﬁc. Choose your wireless access point or

hotspot from the list and type in your password.

Note: If you skip this step, you will not be able to use all the features

of your tablet. The Truck GPS app, however, does not require a

Wi-Fi connection.

Registration

In the next step, you’ll be prompted to register your tablet with

Rand McNally. Your registration ensures that you have access to

the latest information and updates, as well as customer support.

TND™ Tablet User Manual 5

2. Getting Started

Swipe down at left

to view notiﬁcations

Swipe down at right

to view settings 2 4

87 9

Using Android 1

GPS is on

Wi-Fi is on

Indicates remaining battery power

Current time

View installed apps

Tap or swipe right to view second home screen

Back

Return to last home screen

View open apps

TND™ Tablet User Manual 6

2. Getting Started

Settings

Swipe down from the right to view quick settings:

• Brightness

• Wi-Fi – Shows available networks

• Auto-rotation – Controls whether the screen rotates

when you rotate the tablet

• Battery power

• Airplane mode – Turns off Wi-Fi and data transmission

• Bluetooth – Pairs other devices

• Location – Set mode (high accuracy recommended)

• Screenshot – Saves an image of the current screen

• Volume

TND™ Tablet User Manual 7

2. Getting Started

All Settings

Wireless and Networks

• Wi-Fi – View and connect to available Wi-Fi networks.

• Bluetooth – Pair with another device using Bluetooth.

• Data usage – Monitor how much data has been used by different apps.

Device

• Home – Select a different launcher. This will change the home screen

that appears when the tablet powers on.

• Sound – Set volumes for different features and enable/disable sounds.

• Display – Set brightness, wallpaper, and appearance.

• Storage – View how much internal storage is available on your tablet.

• Battery – View time spent on battery and battery power used

by different apps.

• Apps – View apps. Swipe right to view: downloaded, on SD card,

running, all.

TND™ Tablet User Manual 8

2. Getting Started

All Settings

Personal

• Location – View location mode, requests, and reporting.

High accuracy mode is recommended.

• Security – Enable screen security (each time the screen turns on)

and encryption (each time the tablet powers on). Also view

passwords, device administration, and credential storage.

• Language & input – Set language and keyboard information,

as well as speech options and pointer speed.

• Backup & reset – Back up the data stored on your tablet.

Accounts

• Add accounts – Add your email or other accounts.

System

• Date & time – Set date and time, time zone, and clock format.

• Accessibility – Enable spoken feedback to help blind and

low-vision users.

• Printing – Enable printing services.

• About tablet – View network status and version numbers.

TND™ Tablet User Manual 9

2. Getting Started > Main Menu

1 IntelliRoute® TND™ Main Menu (See page 11.)

2 TripMaker®

Use the online planning tool to plan a trip with multiple via points

and transfer it to the navigation app as a multi-stop trip. (See help

available online.)

3 Motor Carriers’ Road Atlas (See page 60.)

4 Dash Cam (See page 61.)

5 Fuel Manager (For assistance with Fuel Manager and all other apps,

see help within each app.)

The bottom three buttons on the home screen can be changed according

to your preferences. (To replace with other apps, open the app tray by

tapping the upper right corner of the screen. Select Rand McNally

Launcher and Truck Widget settings. Tap a box and select a shortcut, or

tap applications to view more. Tap Save.)

3 4 5

TND™ Tablet User Manual 10

3. Truck GPS

Notes on using the Truck GPS app:

• When your tablet is attached to the magnetic mount, the GPS boost

within the mount will provide accurate GPS location, even without a

Wi-Fi connection.

• Weather, trafﬁc, fuel prices, and local search within the Truck GPS app

require a Wi-Fi connection.

• To exit the Truck GPS app at any time, swipe down from the top of the

screen or up from the bottom to view the Android menu bars. Or tap

the main menu button on the front of the device.

TND™ Tablet User Manual 11

3A. Truck GPS > Main Menu

IntelliRoute® TND™ Main Menu

1 Driver Info

Switch between two driver proﬁles, for team driving. Turn team driving

on in Preferences > General. (See page 15.)

2 Load Option*

Specify in Preferences whether the trailer is always loaded or

whether you want to be prompted each time a route is calculated.

(See page 15.) (Does not display if load option is set to

Always Loaded.)

3 Driver Status*

Select driver status.

Note: Set Driver Status to Automatic to start/stop driving timers when

the vehicle moves/stops. (See page 16). However, when the driver status

is set to Automatic mode, tapping the driver status buttons on the

Main Menu temporarily overrides the automatic setting.

4 Truck Tools

Select to enter truck information, set warnings, and access other tools.

(See page 13.)

5 Go To Map

Tap to view location on the map.

6 Choose Destination

Tap to select an address or point of interest (POI).

7 Preferences

Tap to set device, route, or map options. (See page 12.)

8 Mute/Unmute the Speaker

Tap to mute or unmute spoken instructions.

Note: You can also tap this icon when it appears on the map screen

to mute/unmute.

9 Volume

Tap to increase or decrease spoken instructions volume.

*Note: Not available in Car Mode.

1 2 3

4 5 6

7 8 9

TND™ Tablet User Manual 12

3B. Settings

Truck Tools Page

Truck Info

Hazmat Type ..........................................13

Height ..................................................13

Number of Axles ....................................13

Trailers ..................................................13

Truck ETA Adjustment ............................13

Weight (Empty) .....................................13

Weight (Loaded) ...................................13

Width ..................................................13

Warnings

Auto Dismiss Warnings ..........................14

Construction Area .................................14

State or Province Border/

Time Zone Change Warning ..........14

Curve Warnings .....................................14

Driving Day ............................................14

Driving Session .......................................14

Engine Brake Warnings ..........................14

Hill Warnings ........................................14

Narrow Road Warnings .........................14

On Duty Day .........................................14

On Duty Week ......................................14

Speed ..................................................14

Speed Limit Display ...............................14

State/Province Border Alert ...................14

Toll Booth Alert .....................................14

Warning/Alert Prompts .........................14

Warning Display Size .............................14

Weigh Station .......................................14

General

Align screen ..........................................16

Brightness .............................................15

Clock Setting ........................................16

Contact & About ...................................16

Day/Night Map Color ............................15

GPS Status ............................................16

Keyboard ..............................................16

Language ..............................................16

Load Option ..........................................16

Mileage Log ..........................................15

My Custom POIs ...................................15

Reset Truck Timers ................................15

Screen Click ..........................................16

Screen Snapshot Button .......................16

Shortcut Button ....................................16

Skin Style - Day .....................................15

Skin Style - Night ..................................15

Team Driving ..........................................15

Tutorial .................................................16

Units ..................................................16

Update Driver Status .............................15

Vehicle Type ..........................................15

Voice Name ..........................................16

Yard Time Zone .....................................15

Route

Cross-Country Borders ..........................17

Dirt Roads .............................................17

Fast Recalc ............................................17

Ferries ..................................................17

Freeways ...............................................17

Junction View Distance ..........................17

Manage Avoid List ................................17

Recalculation ........................................17

Route ..................................................17

Tollways ................................................17

Truck ETA Adjustment ........................... 17

Tunnels .................................................17

Turn Announcements ............................17

Turn View Distance ...............................17

U-Turns .................................................17

Map

Address Book Icons ...............................18

Bus Icon .................................................18

Car Icon ................................................18

Map Auto Zoom ...................................18

Map Style ..............................................18

POI Icons ...............................................18

Route Color ..........................................18

Truck Icon .............................................18

Truck POI Icons ......................................18

Device Preferences Page Device Preferences Page

1. Tap and to view the options.

2. Tap the option to be set.

3. Enter the new information.

4. Tap Back to save changes.

TND™ Tablet User Manual 13

3B. Settings

Width Use the + and - buttons or enter a numeric

value by tapping the calculator.

Trailers Straight

48’

53’

Double

Triple

ETA Adjustment Increase ETA more

Increase ETA some

ETA ok

Decrease ETA some

Decrease ETA more

Set adjustments to your ETA due to weather

or trafﬁc conditions. You can add (increase)

time to make the trip take longer or

subtract (decrease) time to make the trip

take less time.

Number of Axles Use the + and - buttons.

Truck Info Options

Hazmat Type None

Explosives

Gases

Flammable Liquids

Flammable Solids

Oxidizers

Poison

Radioactive

Corrosives

Other

PIH

Weight (Empty) Use the + and - buttons or enter a numeric

value by tapping the calculator.

Weight (Loaded) Use the + and - buttons or enter a numeric

value by tapping the calculator.

See Load Option in

Preferences › General (page 15)

or on the Main Menu (page 11).

Height Use the + and - buttons or enter a numeric

value by tapping the calculator.

Truck Info Options

TND™ Tablet User Manual 14

3B. Settings

Warnings Options

Warning/Alert Prompts None

Audio & Visual

Visual

Audio

Auto Dismiss Warnings Never

After 10 seconds

After 30 seconds

Height and weight violations will not be

auto dismissed.

Warning Display Size Full screen

Small bar

Height and weight restrictions will always

display in full screen.

Curve Warnings Set warning distance to curves by using the

+ and - buttons.

Hill Warnings Set warning distance to hills by using the

+ and - buttons.

Engine Brake Warnings Set warning distance to locations where

engine braking is prohibited by using the +

and - buttons

Narrow Road Warnings Set warning distance to narrow roads by

using the + and - buttons.

Driving Session Set when to be warned before reaching the

driving session limit.

Driving Day Set when to be warned before reaching

the driving hours limit.

On Duty Day Set when to be warned before reaching the

duty hours limit.

On Duty Week Set when to be warned before reaching the

duty week limit.

Speed Limit Display None

Truck only (limited)

Show car (if no truck limit is available)

State/Province

Border Alert Set warning distance to state/province

borders by using the + and - buttons.

State or Province Border/

Timezone Change Off

Toll Booth Alert Set warning distance to toll booths

by using the + and - buttons.

Weigh Station Set warning distance to weigh stations

by using the + and - buttons.

Construction Area Set warning distance to construction

areas by using the + and - buttons.

Speed Set warning distance to speed limit

changes by using the + and - buttons.

Set the amount over the posted limit at

which the warning appears.

Set a user-deﬁned maximum speed to

be warned whenever the truck exceeds

that speed, regardless of posted

speed limits.

Note: To turn warnings off completely, tap the - button

until “off” displays.

Warnings Options

TND™ Tablet User Manual 15

3B. Settings

General Preferences Options

Skin Style - Day Ice

Carbon

Classic

Skin Style - Night Ice

Carbon

Classic

Vehicle Type Truck

Car

Bus

Controls how routes are calculated.

Note: Some tools and settings may not

be available in car mode.

Yard Time Zone Hawaii

Alaska

Paciﬁc Time

Arizona

Mountain Time

Central Time

Eastern Time

Indiana (East)

Atlantic (Canada)

Newfoundland

Team Driving Turn team driving on and set proﬁles

to keep separate driving timers for

two team members.

Day/Night Mode Always day

Always night

Automatic

Brightness Set separately for day and night modes.

My Custom POIs Tap Manage Custom POIs to specify how

custom POIs are displayed on the map: set

image, warning distance, warning type, and

street/city/state level map display. Tap the “x”

to delete any set of POIs.

(See page 32 for Custom POIs.)

Update Driver Status Automatic

Main Menu buttons

Timers Inactive

Specify how driver status is changed.

Note: When in Automatic mode,

tapping the driver status buttons on the

Main Menu will temporarily override

the automatic setting.

Reset Truck Timers Automatic

Manual

Mileage Log Truck only

Car only

Truck & Car

Don’t log mileage

(See page 52 for mileage.)

General Preferences Options

TND™ Tablet User Manual 16

3B. Settings

General Preferences Options General Preferences Options

Load Option Prompt

Always loaded

Specify whether mileage should be

calculated with the truck empty, always

loaded, or whether to display a prompt

for each route. When set to Prompt,

each time you tap Begin New Route,

a window displays asking if the truck is

loaded or empty.

Screen Click Click off

Click on

Tutorial View on-device tutorial

Keyboard ABC

Computer (QWERTY)

Voice Name Samantha

Tom (English only)

Claudia (No street names)

Language English

Español

Français

For the screen and spoken instructions.

Units U.S. Standard

Metric

Auto Select

Clock Setting 12-hour clock

24-hour clock

Screen Snapshot Button Off

Shortcut Button Main Menu

Go to Map

The shortcut button appears in the bottom

right corner of the screen.

Align screen Calibrate the touch screen.

Note: Select this option if your device

seems to have buttons that are hard

to tap.

GPS Status Tap to show details about your location.

Contact & About Tap to show version information

and copyrights.

TND™ Tablet User Manual 17

3B. Settings

Route Preferences Options Route Preferences Options

Note: The default settings for your device are already optimized for

truck routing. Use the options below to ﬁne-tune these settings.

A route may still include a roadway or maneuver set to Avoid if the

only legal route found contains these types of roads or the route is

over several hundred miles.

Truck ETA Adjustment Increase ETA more (by 15%)

Increase ETA some (by 5%)

ETA ok

Decrease ETA some (by 5%)

Decrease ETA more (by 10%)

Set adjustments to your ETA due to

weather or trafﬁc conditions. You can

add (increase) time to make the trip

take longer or subtract (decrease) time

to make the trip take less time.

Recalculation Manual recalculate

Auto recalculate

Route Fastest route

Shortest route

Freeways Allow all (default)

Avoid freeways

Prefer freeways

Avoid small roads

Tollways Allow tollways

Avoid tollways

U-Turns Allow u-turns

Avoid u-turns

Ferries Allow ferries

Avoid ferries

Cross-Country Borders Allow cross borders

Avoid cross borders

Dirt Roads Allow dirt roads

Avoid dirt roads

Tunnels Allow tunnels

Avoid tunnels

Manage Avoid List Roads

States/Provinces

Areas

Routes

To avoid a state or province select it from

this list. Tap on the map and select a road,

area, or route to add it to the Avoid List. Tap

the x to remove. (See page 31.)

Fast Recalc Off

Fast recalc calculates a route to a midpoint

between your location and the destination,

rather than recalculating the entire route

from scratch. Best used on a long route

that has short distances between

intersections.

Turn Announcements Set three distances at which you want

to be warned about an upcoming turn.

The ﬁrst announcement will be the farthest

from the turn and the third the closest to

it.

Turn View Distance Set the distance before the maneuver at

which the local street turn view screen

appears. (Note: In 3D map view, this

warning is not needed and will be

turned off.)

Junction View Distance Set the distance before the maneuver

at which the highway junction view

screen appears.

TND™ Tablet User Manual 18

3B. Settings

Map Preferences OptionsMap Preferences Options

Map Style Light

Dark

Map Auto Zoom Off

On, auto scale

On, street scale

On, city scale

On, state scale

Set to auto scale to keep the current

vehicle position and the next turn

in the map view at all times. Set to

street/city/state scale to specify the

maximum scale of the zoom.

Note: Map redraw speed is impacted

by autozoom choice, especially when

combined with 3D map display option.

Turn it off for quicker display.

POI Icons Off

Select icons to display on map

Select restaurants, banks, and consumer

POIs (“Other” category) to display on

the map. Tap any category to ﬁll in the

square and display those icons.

Truck POI Icons Off

Select icons to display on map

Select travel centers, service, weigh stations

and truck POIs to display on the map. Tap

any category to ﬁll in the square and

display those icons.

Address Book Icons Off

Address book entries appear as pushpin

icons unless they are assigned to a group.

Grouped entries appear as folders.

(See page 26.)

Truck Icon Use the arrows to select different icons to

display when using the truck setting.

Use the slider to change the color.

Car Icon Use the arrows to select different icons to

display when using the car setting.

Use the slider to change the color.

Bus Icon Use the arrows to select different icons to

display when using the bus setting.

Use the slider to change the color.

Route Color Use the slider to select.

TND™ Tablet User Manual 19

Destinations

To access this window from the Main Menu, tap Choose Destination.

1 Back

Tap to return to the Main Menu.

2 New Location

Tap to route to a new location by address, city center, intersection,

or latitude/longitude. (See page 21.)

3 History

Tap to route to a recently entered location.

4 Address Book

Tap to view a list of saved locations. (See page 25.)

5 Multi-Stop Trips

Tap to view a list of saved multi-stop trips or to create a new one.

(See page 27.)

6 Points of Interest/POIs

Tap to search for a point of interest (POI) such as a gas station,

restaurant, etc. (See page 32.)

Local Search

Tap to search for local businesses, restaurants, and more

by name or keyword. (Note: Wi-Fi connection required.)

(See page 36.)

3C. Destinations

2 3 4

5 6

TND™ Tablet User Manual 20

Helpful Tips on Entering Addresses

Auto-Complete Feature:

Enter the ﬁrst few characters in a name and a short list displays

a couple of names that start with the typed characters.

On the keyboard, the only keys available are for the next valid

characters in a search name.

Continue entering characters until the searched-for name displays

in the list. Tap on the name to select it.

Cities:

Some cities with common names such as “Athens” have several types

of names associated with a city.

If a name does not display, continue typing characters until the name

you are looking for displays in the list.

Streets:

If the next letter in the street name can not be selected on the keyboard,

tap Expand Search to search a greater area.

The Expand Search button can also help locate addresses that may actually

be in a different town, spelled slightly differently, or in a neighboring town.

Note: If you’re entering a State or County Route, it’s typically best to ﬁrst

either enter the State or County initials (for example, State Road 535 would

be entered as “SR”) but you may also need to try other options, such as

“State Road” or “CA” for California, for example.

3C. Destinations

Tap to view a longer list of names

matching the typed characters.

Tap to view a list of previously

selected locations.

Add a space.

Delete last character and move

back one space.

Type an apostrophe, hyphen,

or other symbol.

TND™ Tablet User Manual 21

New Location

1 Address

Tap to route to an address by entering the city, street, and number,

or by entering the zip code and street. (See page 22.)

2 City Center

Tap to route to a city center. (See page 23.)

3 Intersection

Tap to route to two intersecting roads in a city. (See page 23.)

4 Back

Tap to return to the previous window.

5 Enter Lat/Long

Tap to route to a location by latitude and longitude. (See page 24.)

6 Menu

Tap to return to the Main Menu.

3C. Destinations

1 2 3

5 6

TND™ Tablet User Manual 22

Search for an Address

1. Tap Choose Destination > New Location > Address.

2. Type the ﬁrst few characters in the city name. As you type,

a short list of matching city names displays.

3. Tap on a city to select it.

• If the city is not displayed on the short name list, continue typing

characters in the city name or tap List to display a long list of city

names. Use the up and down arrows to view all cities/states.

Tap on a city to select it.

Note: If a city name appears twice within a state, you may need to check

both for your speciﬁc address.

4. Or tap Enter Zip Code. Type the zip code.

5. Type the ﬁrst few characters in the street name, or if the next

characters of the street name cannot be selected on the keyboard,

tap Expand Search and search a wider area.

6. Tap on the street name from the displayed list.

7. Tap the house number or tap List to show a list of address ranges

and select a range.

Note: To enter the House Number before the street, tap this button in

step 5. This preference will be saved for subsequent address entry.

8. Tap on the street number range from the list.

The Conﬁrmation Window displays. (See page 37.)

9. Tap Begin New Route to navigate to the location.

3C. Destinations > Addresses

TND™ Tablet User Manual 23

Route to a City Center

1. Tap Choose Destination > New Location > City Center.

2. Type the ﬁrst few characters in the city name.

3. Tap on the city/state name.

The Conﬁrmation Window displays. (See page 37.)

4. Tap Begin New Route to navigate to the location.

Route to an Intersection

5. Tap Choose Destination > New Location > Intersection.

6. Type the ﬁrst few characters in the city name.

7. Tap on the city name.

8. Type the ﬁrst few characters in the primary street name, or if the next

characters of the street name cannot be selected on

the keyboard, tap Expand Search and search a wider area.

9. Tap on the street name in the list.

10. Type the ﬁrst few characters in the intersecting street name.

11. Tap on the intersecting street name.

The Conﬁrmation Window displays. (See page 37.)

12. Tap Begin New Route to navigate to the location.

3C. Destinations > Addresses

TND™ Tablet User Manual 24

Route to a Latitude/Longitude

1. Tap Choose Destination > New Location > Enter Lat/Long

2. Tap in the Latitude ﬁeld.

3. Enter the latitude of the location and tap Enter.

4. Tap in the Longitude ﬁeld.

5. Enter the longitude of the location and tap Enter.

6. Tap Go. The Conﬁrmation Window displays. (See page 37.)

7. Tap Begin New Route to navigate to the location.

Note: There are two ways to enter latitude/longitude: by decimal degrees

or by degrees, minutes, and seconds.

3C. Destinations > Addresses

TND™ Tablet User Manual 25

Address Book

Add Locations to the Address Book from the Conﬁrmation Window

(See page 37.):

1. Tap Save to Address Book.

2. Tap Yes to accept the default name or tap No to display a keyboard.

3. Type the name of the location and tap Enter to save the location

in the Address Book. The Conﬁrmation Window re-displays.

Entries

• Tap Choose Destination > Address Book.

Entries are alphabetically sorted by Name.

• To sort by Distance or Date, tap Sort By.

• Use the up and down arrows to scroll through the list or use the

alphabet buttons on the left.

• Tap the Search ﬁeld to search the Address Book by keyword.

• The notepad icon indicates a note has been added for this location.

Route to an Address Book Location

1. Tap Choose Destination > Address Book.

• Tap on the All Addresses tab or

• Tap on the Groups tab.

2. Tap on an address to select it.

The Conﬁrmation Window displays. (See page 37.)

3. Tap Begin New Route to navigate to the location.

3C. Destinations > Address Book

TND™ Tablet User Manual 26

Create a Group

1. Tap Choose Destination > Address Book.

2. Tap on the Groups tab.

3. Tap New Group.

4. Type the group name.

5. To select a different color folder, tap .

6. Tap on a color, then tap Close.

7. When ﬁnished, tap Enter.

Tap on the next to a group to delete the group.

Addresses will still be saved in the Address Book.

Note: You can also choose to display address book icons

on the map. (See page 18.)

Add an Address to a Group

1. Tap Choose Destination > Address Book.

2. Tap the Groups tab.

3. Tap on the group you want to add an address to.

4. Tap New Location.

5. Tap Enter New Address, History, Address Book, or POI.

6. If you selected:

• History, Saved, or POI, the selected location is added to

the group.

• Enter a New Address, tap Yes to accept the default name

or tap No to display a keyboard and enter a new name.

Remove an Address From a Group

1. Tap Choose Destination > Address Book.

2. Tap on the Group tab.

3. Tap on the Group you want to remove the address from.

4. Tap on the next to the address to be removed.

5. Tap Yes.

3C. Destinations > Address Book

TND™ Tablet User Manual 27

Create a Multi-Stop Trip

1. Tap Choose Destination > Multi-Stop Trips.

2. Tap New Trip.

3. Type the trip name.

4. To select a different color folder, tap .

5. Tap on a color, then tap Close.

6. When ﬁnished, tap Enter.

Note: A multi-stop trip can include up to 50 stops.

Add a Stop

Note: You can add locations in the order you want to route to them

or reorder stops later (See page 28.)

From the Main Menu:

1. Tap Choose Destination > Multi-Stop Trips.

2. Tap on the route.

3. Tap Add Address.

4. To add an address, tap Enter New Address, History,

Address Book, or POI.

5. A Conﬁrmation Window asks if you want to add another stop.

Tap:

• Yes to add another stop

• No if the route is complete.

6. Tap Back to save changes.

Remove a Stop

1. Tap Choose Destination > Multi-Stop Trips.

2. Tap on the route.

3. Tap on the next to the stop to be removed.

4. Tap Yes.

3C. Destinations > Multi-Stop Trips

TND™ Tablet User Manual 28

Reorder Routes

Optimize Automatically

After all locations have been added to a multi-stop trip, you can run

the optimizer wizard to organize your trip.

1. Tap Choose Destination > Multi-Stop Trips.

2. Tap on the route you want to optimize.

3. Tap Reorder Trip.

4. Tap Automatic/Optimize.

5. Tap Select First Stop and select the ﬁrst stop, or No Preference.

6. Tap Select Last Stop and select the last stop, or No Preference.

7. Tap Yes to return to your current location to complete the route

or No to complete the route at the last stop.

8. Tap Start Trip to begin the route.

Note: There is a limit of ten stops that can be optimized automatically.

Reorder a Route Manually

1. Tap Choose Destination > Multi-Stop Trips.

2. Tap on the route you want to optimize.

3. Tap Reorder Trip.

4. Tap Manual.

5. Tap on the stop to be moved and tap the arrows to move stops

up or down.

6. When ﬁnished, tap OK.

7. Tap Start Trip to begin the route.

3C. Destinations > Multi-Stop Trips

TND™ Tablet User Manual 29

Select and Run a Saved Route

1. Tap Choose Destination > Multi-Stop Trips.

2. Tap on the route to select it.

3. Tap Start Trip. The Conﬁrmation Window displays. (See page 37.)

4. Tap Begin New Route to navigate to the location.

5. The IntelliRoute® TND™ calculates the route to your ﬁrst stop.

When you have reached the stop, a message displays.

6. Tap:

• Next Stop - To calculate a route to the next stop in the route.

• Skip Next Stop - To skip the next stop and calculate a route

to the stop after the next one.

• End Current Trip - To end the route at the current stop.

Note: To view your entire trip, select Summary Map View from the

Route Display Options. (See page 41.)

Delete a Route

1. Tap Choose Destination > Multi-Stop Trips.

The Multi-Stop Trips window displays.

2. Tap on the next to the route to be deleted.

3. A conﬁrmation message displays.

4. Tap:

• Yes to delete the route.

• No to keep the route.

3C. Destinations > Multi-Stop Trips

TND™ Tablet User Manual 30

Tap on the Map

When you tap on the map screen, the crosshairs display.

1 Add as Via

Add a via—an interim stop between the origin and the destination.

2 Avoid

Tap to avoid the route, road, or area, or to detour. (See page 31.)

3 Set Origin

Set the location as the starting point of the route.

4 Route to Here

Tap Begin New Route to navigate to the location.

5 Wi-Fi

View live information at this location with a Wi-Fi connection.

3C. Destinations > Tap Map

123 4

TND™ Tablet User Manual 31

3C. Destinations > Avoid List

Avoid List

From the map, set speciﬁc locations to avoid. Tap on the map and select

Permanent Avoid. Choose Avoid Route, Avoid Road, or Avoid Area.

Or, if the location is along an active route, choose Detour.

Avoid Route

Choose whether to avoid an upcoming distance on an active route, in

the left column, or a speciﬁc road section, in the right column. Or,

select Avoid Entire Route. The route is recalculated and the avoided

sections are added to the Avoid List, under Routes.

Avoid Road

Add the selected road segment to the Avoid List, under Roads.

(Note: Reposition the map after zooming in or out to be sure to select

the right location.) Road segments that have been permanently

avoided are shown in pink on the map when zoomed in. Tap on a

segment and tap Remove Avoid to remove the segment from the

Avoid List.

Detour

Detour around a road segment on an active route. The route is

recalculated, but the road segment is only avoided temporarily and

does not appear on the Avoid List. To cancel the detour, tap the icon

in the lower left-hand corner of the map screen and select Detour.

(See page 45.)

Avoid Area

Set an area on the map to avoid. Increase/decrease the size of the

area using the and buttons. Tap Save to add the area to the

Avoid List, under Areas. Enter a name for the area. If an active route

has been entered, the route does not recalculate. Avoided areas are

shown on the map in pink.

To remove items from the Avoid List, tap Manage Avoid List in

Preferences > Route. Tap the to remove. Tap Roads in the Avoid

List to view avoided roads on the map. You may need to re-enter your

destination to recalculate an active route.

Avoid Options

Avoid Route

Avoid Area

TND™ Tablet User Manual 32

Points of Interest (POIs)

1 My Truck/Near Car

Tap to search for a point of interest near the current vehicle location.

2 City

Tap to search for a point of interest in a city.

3 My Route

Tap to search for a point of interest along the vehicle route.

4 End of Day

Tap to search for a point of interest along the last 30 minutes of

your route. This search is based on your remaining driving hours

in Truck Tools > Timers. (See page 51.)

Note: Not available in Car mode.

5 Destination

Tap to search for a point of interest near the route destination.

6 Back

Tap to return to the previous window.

7 Custom POI

Tap to select a custom POI location.

8 Main Menu

Tap to return to the Main Menu.

3C. Destinations > POIs

7 8

4 5

TND™ Tablet User Manual 33

Points of Interest (POIs)

1 Travel Center

Tap to search for a travel center with truck amenities.

(See page 35 to ﬁlter by amenities.)

2 Truck Services

Tap to search for a truck services POI.

(See page 35 to ﬁlter by amenities.)

3 Parking & Rest Areas

Tap to search for truck parking or a rest stop.

4 Weigh Station

Tap to search for a truck weigh station.

5 CAT Scales

Tap to search for a CAT scale location.

6 Dealers

Tap to search for a truck dealership.

7 Other Categories

Tap to select a consumer (non-truck) related point of interest.

8 Back

Return to previous window.

3C. Destinations > POIs

1 2 3

4 5 6 7

TND™ Tablet User Manual 34

Other Categories

1. Tap Choose Destination > Points of Interest.

2. Select a search type (My Truck/My Car, City, My Route,

End of Day, or Destination).

3. Tap Other Categories.

4. Tap on a category. (For example, tap Hospital/Emergency.)

5. If necessary, tap on a subcategory type. (For example, tap Pharmacy.)

6. Tap on a location from the list

7. Tap All.

8. Tap on the Spell button to display the keyboard.

9. Type the ﬁrst characters in the POI name.

10. Tap on the POI name in the displayed list.

3C. Destinations > POIs

TND™ Tablet User Manual 35

Select and Filter Travel Center Amenities and Truck Services

Truck-related Travel Center points of interest can include over 70 different

types of amenities. To select only the travel centers with the amenities that

you are interested in, ﬁlter your search results.

1. Tap Choose Destination > Points of Interest.

2. Select a search type (My Truck/My Car, City, My Route,

End of Day, or Destination).

3. Tap Travel Center or Truck Service.

4. Tap Select Services.

5. Click on the check box of each amenity to be included in

the search.

6. Tap OK.

The Travel Center window displays POI locations with your

selected amenities.

7. Tap on a location from the list.

8. A check next to Filter indicates the search terms have been applied.

Tap Filter to return to general search results.

Rate a Truck Point of Interest

You can rate truck POIs from the Conﬁrmation Window. (See page 37.)

For each POI, the top row indicates the community rating from

fellow drivers for the point of interest. The bottom row indicates

your individual rating.

1. Tap on the POI Ratings button.

2. Use and to rate the facility.

3. Tap Create Comment and type a personal comment on the facility.

4. Tap Enter to save the comment.

5. Tap Back to save changes.

3C. Destinations > POIs

TND™ Tablet User Manual 36

Note: This feature requires a Wi-Fi connection. (See page 4.)

Use Local Search to search the Internet for a restaurant, business, or any

type of location by name, keyword, or category. Tap Choose Destination

> Local Search.

Choose whether to search:

near your truck

in a speciﬁc city

near your destination

Select a category, or tap Keywords to search using a speciﬁc name

(e.g., “Subway”) or a keyword (“sandwich”).

Tap Nearby Food to show a list of area restaurants based

on your current location.

Tap My Local History to show a list of previous searches.

3C. Destinations > Local Search

1 2 3

4 5

TND™ Tablet User Manual 37

3C. Destinations > Conﬁrmation Windows

Conﬁrmation Windows

1 Destination Address

The selected location address.

Begin New Route

Tap to route to destination.

Compare Routes

Tap to choose between two routes (See page 38.)

Add as Via

Add this location as an interim stop between the origin and destination.

This automatically makes the current route a multi-stop trip.

(See page 27.)

Save to Address Book

Add the location to the Address Book or add to Address Book group.

(See page 25).

Atlas

Cross-reference to printed Rand McNally Motor Carriers’ Road Atlas.

(Page numbers apply to the most recent Atlas.)

Go to Map

Tap to view this location on a map.

Set Origin

Tap to set the location as the starting point of a route.

Tap to return to the Main Menu.

Details

Tap to view phone number and amenities at this location.

POI Rating

Tap to rate or add a comment to this location. (See page 35.)

Edit Entry

Rename or edit this entry in the Address Book.

Note

Add a note about this location in the Address Book.

Back

Tap to return to previous window.

Address Book

New Location 1

Truck POI

Screens differ according to destination type:

11 10

12 13

8 9

TND™ Tablet User Manual 38

3C. Destinations > Toll Costs, Route Compare

Toll Costs

From the destination conﬁrmation screen, tap Begin New Route.

If the calculated route includes tolls, a message appears.

Use Current Route

Show estimated toll costs and continue along the calculated route.

Compare Routes

Compare the calculated toll route to an alternate route without tolls.

(See below.)

Don’t Prompt for Tolls

Use the current route and disable this prompt for subsequent route

calculations.

Note: You can re-enable this prompt in Preferences > General.

(See page 15.)

Route Compare

1. From the destination conﬁrmation window, tap Compare Routes

to calculate and display two routes and choose between them.

2. Choose to ignore tolls and calculate two routes based solely on

route preferences, or to calculate a primary route (which may

include tolls) and an alternate route without tolls.

3. The top of the screen displays the total distance and time for each

route, as well as any estimated toll costs. Zoom in to get a closer

look at each route on the map.

4. Tap either button at the top of the screen to select that route.

If the route includes tolls, estimated toll cost will display.

1 32

TND™ Tablet User Manual 39

City, county, and state Current street name

Next intersecting street name Advanced lane guidance

9 Current Mile Marker

Tap to open a “Tell Rand” message.

10 Current Information

View current information by city, street, or upcoming intersection. Also

displays advanced lane guidance and weather overlay key, when enabled.

Tap to change. (Note: For some destinations, the “Am I close?” feature

counts down addresses as the vehicle approaches.)

11 Location and Route Options

Tap to see current location information, change route settings, detour,

cancel a route, and manage avoided roads. (See page 45.)

12 Current Speed

Tap to display the Virtual Dashboard. Turns red for speed warnings.

(See page 42.)

13 Speed Limit

Orange for truck limit; white for general limit.

Tap to open a "Tell Rand" message about speed limits.

14 Map View Tab

Tap to simplify the map screen. Icons are minimized to show simply

the zoom, next maneuver, and miles/time.

15 Trafﬁc

Tap to view the Trafﬁc window. (See page 47.)

16 Mute

17 Wi-Fi

Tap to access Wi-Fi connected features.

1 Next Maneuver

Tap to repeat spoken next maneuver instructions.

2 Road Name

Name of street you will turn onto next.

3 Miles/Time

Displays remaining distance. Tap to select from: yard arrival time,

arrival time, remaining time, yard time, and elevation.

4 Exits Quick View

Slide out to show upcoming exit information. (See page 40.)

5 Directions Slide-Out List

Tap to select a route display option. (See page 41.)

6 Zoom In/Zoom Out

7 Main Menu

8 Compass Direction

Tap to change the map display. An icon in the upper right corner

displays the selected option: North up (N), heading up (arrow),

or 3D (3). Also displays Wi-Fi status.

3D. Maps & Routing

1 2 3

11 10 8

15 16

Route Map Window

TND™ Tablet User Manual 40

3D. Maps & Routing

Exits Quick View

Slide out to show Points of Interest and amenities at upcoming exits.

The list displays the distance to the next exit, exit name and number,

and a count of available amenities.

1. Tap on an exit to bring up the list icon .

2. Tap the icon to display locations by category.

3. Tap on any item in the list to route to that location.

TND™ Tablet User Manual 41

3D. Maps & Routing

Directions Slide-Out List

Route Display Options

1. When ﬁrst opened, the slide-out list displays in Detail View showing

each maneuver.

2. Use and to view the instructions.

3. To change the display option, tap Route Display Options.

See Highway View, Trip Summary (for multi-stop trips),

and Summary Map View at left.

1 Rise/Set

Displays the times of sunrise and sunset for your current location.

2 MPH

Displays the current vehicle speed, in miles per hour.

3 Distance, Time

Displays remaining distance and time.

4 Distance

Displays the distance for each road segment.

5 Street/Road Name

Displays the street name you will be on after performing the next

maneuver. Tap on any item in the list to view it on the map and to

detour around it if necessary. (Note: For multi-stop trips, highways in

each leg are listed, color-coded by segment.)

6 Total Distance and Time

Total distance and time for the entire trip.

7 Leg

Number of the leg and distance.

8 Leg Destination

Leg destination.

Trip Summary (for multi-stop trips)

Highway View 1 2 3

Summary Map View (entire trip)

TND™ Tablet User Manual 42

3D. Maps & Routing

Virtual Dashboard

To show the Virtual Dashboard, tap the Current Speed.

1 Current direction of travel.

2 Displays current times at the yard, current location

and destination, as well as estimated time of arrival.

3 Sunrise and sunset times based on vehicle location

(latitude/longitude) and day.

4 Current speed (above) and posted speed limit (below).

Note: Turns red when speed limit warning exceeded.

(See page 14 to set speed limit alert.)

5 Elevation at current location.

6 Percentage of current trip completed, distance to next maneuver,

and the number of miles and time spent on the trip to this point.

7 Match with truck’s odometer to automatically update new fuel logs.

Tap the pencil to edit.

8 Return to the Route Map Window.

9 Gather trip information for up to three trips.

Includes odometer settings, hours, and speeds.

10 Reset trip information for the selected trip (Tab 1, Tab 2 or Tab 3).

(See page 43.)

11 Select to automatically reset the information in each tab after

the vehicle has remained stationary for the speciﬁed number of hours.

12 View fuel logs and add fuel purchase information.

Tap here

1 2 12 8

10 11

TND™ Tablet User Manual 43

3D. Maps & Routing

Manually Reset Trip Information

1. Tap on the tab you want to reset.

2. To set the odometer for the selected tab back to zero,

tap Reset All.

3. Information is captured as you travel the route.

Automatically Reset Trip Information

To reset trip information after the vehicle has remained stationary after

a speciﬁc number of hours:

1. Tap on the tab you want to reset.

2. Tap Auto Reset.

3. Tap to increase the number of hours.

4. Tap to decrease the number of hours.

5. To save changes, tap Change.

6. The Tab displays the auto reset number of hours.

TND™ Tablet User Manual 44

Junction View

When on a route, Junction View displays when you have an upcoming

maneuver. Set distance in Preferences > Route. Once past the maneuver,

Junction View closes and the previous window displays.

1 Signs to follow for the next maneuver.

2 Number and direction of lanes for the next maneuver.

3 Distance to the upcoming maneuver. Distance decreases as you

approach the ramp.

4 Lane assist arrow.

5 Mute the speaker.

6 Return to previous window.

Turn View

Displays for upcoming turns. Set distance in Preferences > Route.

3D. Maps & Routing

TND™ Tablet User Manual 45

3D. Maps & Routing

Location and Route Options

1 Nearest cross street

2 Current road you’re on, current town you’re in

3 Latitude and longitude at current location

4 Current location by mile marker

5 Return to previous window

6 Detour

Around Part of the Route

1. On the left side of the Window, tap the number of miles

on the route to be avoided.

2. The route is recalculated.

Around a Speciﬁc Roadway

1. On the right side of the Window, tap and to view

a list of roads in the current route.

2. Tap on one or more roadways to be avoided.

A check mark appears in front of each selected road.

3. Tap Detour to recalculate the route.

Note: Tap Cancel Detour to remove detours.

7 Detour the entire route and add it to the avoid list. (See page 31.)

8 Skip to next stop (for multi-stop trips).

9 Cancel current route.

10 Save current location to the Address Book. (See page 25.)

11 Access list of avoided roads. (See pages 17, 31.)

12 Access Route Preferences. (See page 17.)

2 3

6 9

10 11 12

TND™ Tablet User Manual 46

3E. Tools & Features

Weather

Notes:

• This feature requires a Wi-Fi connection.

• The refresh speed of the weather display is dependent on the

connection speed. Weather information is updated every few

minutes while Wi-Fi connection is active.

• Weather display depends on active weather patterns and

map zoom level.

To view current weather information and the three-day forecast for

your location, tap the Wi-Fi icon ( ) on the map screen and

tap the Weather tab.

1 View details for current weather alerts.

2 View weather information at your destination.

Note: You can view weather information at any other location

by tapping the map and then the Wi-Fi icon and the Weather icon.

3 Select type of weather overlay to display on the map.

4 Select from a variety of weather types:

• No weather (turn off)

• Trafﬁc impact

• Temperature

• Feels like

• Current precipitation intensity and type

• Probability of precipitation

• Forecasted precipitation intensity, type, and clouds

• Forecasted precipitation intensity and type

• Dew point

• Relative humidity

• Wind speed

5 Slide to adjust the transparency of the overlay on the map.

Note: Use the slider to readjust for visibility when switching

between day and night modes.

3 2

Tap to re-display city, street, or intersection.

TND™ Tablet User Manual 47

3E. Tools & Features

Trafﬁc

Download Trafﬁc Everywhere and Predictive Trafﬁc in the Rand McNally

Market. (See page 63.)

Note: Requires a Wi-Fi connection.

To view trafﬁc information, tap the Trafﬁc icon on the map screen.

(The icon changes with trafﬁc conditions.) Select Trafﬁc Everywhere for

current conditions or Predictive Trafﬁc to view typical conditions by day/time.

1 Optional Route

Tap to select either a recalculated route based on trafﬁc events

or to stay on the current route.

2 Trafﬁc on Route

Tap to view trafﬁc events along your route.

3 Trafﬁc List

Tap to view a list of trafﬁc events in the area.

4 Back

Tap to return to the previous screen.

5 Trafﬁc Source

Tap to change.

6 Menu

Tap to return to the Main Menu.

7 Day/Time

Choose the day of the week. Use the arrows to set the time.

8 Detailed list

Tap any item to view on the map and detour if necessary.

(Note: You can also tap icons on the map to view details.)

9 Flow

Check to display trafﬁc ﬂow in the list and on the map.

10 Incidents

Check to display incidents in the list and on the map.

910

Predictive Trafﬁc

Trafﬁc Everywhere

Trafﬁc Details

TND™ Tablet User Manual 48

3E. Tools & Features

Trafﬁc Icons

Accident Accident Incident Closure

Exit blocked Entrance blocked Trafﬁc Carpool Road work

Obstruction Dangerous Road condition Temperature

Wind Activities Security Delay Cancel

Size/weight limit Visibility Heavy

trafﬁc

Moderate

trafﬁc

Light

trafﬁc

Travel time

Chance of precipitation

Carriageway

TND™ Tablet User Manual 49

3E. Tools & Features

Fuel Prices

Note: This feature requires a Wi-Fi connection.

To show fuel prices, tap the Wi-Fi icon on the map screen and

tap the Fuel Prices tab.

1 Displays stations and prices, with distance as the crow ﬂies.

Check to show the icons and prices on the map screen.

Sort by distance or price.

Apply ﬁlters for type of fuel and speciﬁc brand.

Check to show fuel prices along the route.

32 4 5

TND™ Tablet User Manual 50

3E. Tools & Features

Truck Tools

Note: Some features are not available in Car Mode.

1 Back

Return to the Main Menu.

2 Truck Info

Enter truck information (weight, length, etc.). (See page 13.)

3 Timers, Mileage, Trails, and Fuel

View driving, on-duty, and maintenance timers; state logs; trails;

and fuel purchase information. (See pages 51-54.)

4 Warnings

Set warning distances for driving time, duty hours, and upcoming

weigh stations. (See page 14.)

5 Quick Planner

Between any two cities or towns, quickly calculate the distance,

driving time, and cost. (See page 55.)

6 Rand Motor Carrier’s Road Info

View Rand McNally Truck Emergency contact information and

truck regulations. (See page 56.)

7 Tell Rand

Compose a message to send to Rand McNally when you

connect to the Dock. (See page 58.)

8 Calendar (See page 57.)

9 Notepad (See page 57.)

10 Converter (See page 57.)

Quickly convert distance, weight, and temperature.

11 Calculator (See page 57.)

2 3

4 5 6 7

8 9 10 11

TND™ Tablet User Manual 51

3E. Tools & Features

Timers

Note: Odometers count up and record the current mileage. Maintenance

counters count down. When a maintenance timer counts down to 2,000

miles, a reminder displays each time the TND starts.

1. Tap Truck Tools.

2. Tap Timers, Mileage, Trails, Fuel.

3. Tap the Timers tab.

Tap the driver proﬁle on the bottom left to switch between two team drivers.

On the left, use the Change To ﬁeld to make adjustments to

mileage or hours. The mileage/hours continue to count down

from the changed value.

1. Tap

to decrease the setting.

2. Tap + to increase the setting.

3. Tap the calculator to display a keyboard. Enter a number and tap Enter.

4. Tap Change.

On the right, use the Reset To ﬁeld to set the most common reset

value, normally zero. At the beginning of each day or run,

tap Reset to set the value back to zero for odometers and 15,000

or 35,000 for maintenance odometers.

1. Tap

to decrease the setting.

2. Tap + to increase the setting.

3. Tap the calculator to display a keyboard. Enter a number and tap Enter.

4. Tap Reset.

TND™ Tablet User Manual 52

3E. Tools & Features

Mileage

1. Tap Truck Tools.

2. Tap Timers, Mileage, Trails, Fuel.

3. Tap the Mileage tab to view list of logs for the current year,

ordered by quarter.

4. To view quarterly mileage logs for previous years, tap Year.

Tap on a quarter to view log entries.

5. Tap on a quarter to view details. Tap View by Date/View by State

and Empty/Loaded for more information.

To delete a log, tap on the next to the log entry to be deleted.

Tap Yes to delete the log.

Note: Load Option and Driver Status control how logs are recorded.

(See pages 15-16.)

TND™ Tablet User Manual 53

3E. Tools & Features

Trails

Use Trails to record a “bread-crumb” path of GPS coordinates where

your truck has traveled.

1. Tap Truck Tools.

2. Tap Timers, Mileage, Trails, Fuel.

3. Tap the Trails tab.

4. To record a trail, tap New Trail.

5. To end the trail, tap the Trails icon on the map screen.

6. The trail is recorded in the Trails tab.

7. Tap on a trail to view details.

8. Tap Show on Map to display the trail on the map screen.

9. Tap Edit Name to change the name of the trail.

10. Tap Set Color to change the color of the trail.

Note: The Trails feature is also accessible from the Address Book.

(See page 25.)

TND™ Tablet User Manual 54

3E. Tools & Features

Fuel Logs

1. Tap Truck Tools.

2. Tap Timers, Mileage, Trails, Fuel.

3. Tap the Fuel tab to view a list of fuel logs by quarter.

4. Tap Add Fuel to record the date, location and cost of fuel purchase.

5. Tap on any ﬁeld to edit.

6. Check Taxable to include the purchase in the fuel log.

7. Tap Save (Note: Fuel economy is calculated automatically.)

8. Once fuel purchases have been entered, tap on a quarter to view

the details.

9. You can View by State or View by Month.

10. Tap the state or month to view fuel purchases.

11. Tap View All to see all fuel purchases.

TND™ Tablet User Manual 55

3E. Tools & Features

Quick Planner

Use this tool to quickly estimate the mileage and time between any

two cities or towns.

1. Tap Truck Tools.

2. Tap Quick Planner.

The revenue or cost per mile used in the last computation displays.

3. Tap From City 1 and select the city.

4. Tap To City 2 and select the city.

5. The distance displays.

6. Tap Cost per Mile and enter the per mile rate or tap Total and

enter the total amount.

7. Tap the new dollar amount and tap Enter.

8. The dollar amounts readjust automatically.

9. Tap Average Speed (MPH) enter a speed:

• Ta p

or + to decrease or increase the speed.

• Tap the calculator to enter a speed.

10. Tap Change.

11. The driving time displays.

TND™ Tablet User Manual 56

3E. Tools & Features

Road Atlas Information

To reference the Rand McNally Motor Carriers’ Road Atlas:

1. Tap Truck Tools.

2. Tap Road Atlas Information.

3. Select the appropriate country tab.

4. Select the appropriate state/province to view emergency

and other key phone numbers.

TND™ Tablet User Manual 57

3E. Tools & Features

Calendar

1. Tap Truck Tools.

2. Tap Calendar.

3. Use the arrows to view other months and years.

4. Tap Today to return to the current date.

Notepad

1. Tap Truck Tools.

2. Tap Notepad.

3. Tap New Note.

4. Tap a note in the list to view and edit.

Unit Converter

5. Tap Truck Tools.

6. Tap Converter.

7. Tap on the ﬁrst ﬁeld and select the type of conversion to perform.

8. Tap on the second ﬁeld and enter the value to be converted.

9. Tap Enter.

Calculator

1. Tap Truck Tools.

2. Tap Calculator.

TND™ Tablet User Manual 58

3F. Tell Rand

Tell Rand

Enter messages for Rand McNally regarding construction, truck restrictions,

addresses, your device, and more.

1. Tap Truck Tools.

2. Tap Tell Rand. On the left side, tap Current Location.

Enter Different Location or Find Location on Map.

Note: You can open a Tell Rand speed limit message by tapping

the speed limit or mile marker on the map screen.

3. If you selected Enter Different Location, enter it as an address.

If you selected Find Location on Map, tap on the map to set the

crosshairs at that location, then tap Back.

4. On the right side, tap the type of message you want to send.

5. Type your message.

6. Tap Enter to save the message.

7. To discard the message and return to the previous window,

tap Back.

8. To send the message, be sure your device is connected to

the Inter net.

TND™ Tablet User Manual 59

4. TripMaker®

TripMaker is a trip planning app that allows you to easily browse the map

and set up a multi-stop trip. Add via points and send your trip to the

Truck GPS app for truck-friendly routing.

Please note that TripMaker does not provide truck routing.

View Help in the TripMaker app to learn more.

TND™ Tablet User Manual 60

5. Motor Carriers’ Road Atlas

A digital version of Rand McNally’s Motor Carriers’ Road Atlas.

Tap Maps at the top right to select pages by state.

TND™ Tablet User Manual 61

6. Dash Cam

Records a video loop as you drive. Tap the red button to record again

to stop.

Tap the menu icon at the top right to access preferences for video quality,

audio, and segments.

TND™ Tablet User Manual 62

7. Preloaded Apps

Your TND™ Tablet comes preloaded with trucking apps available from our

partners. For support, view help within each app.

Fuel manager

Accounting

Document imaging

Load board

TND™ Tablet User Manual 63

8. Rand McNally Market

Additional apps are available for download in the Rand McNally Market.

Look for these complimentary apps:

• Backup cam (requires accessory)

• E-Logs for Rand McNally HD-100 (requires accessory)

• Predictive Trafﬁc (add to Truck GPS app)

• Rand McNally Road Atlas

• Trafﬁc Everywhere (add to Truck GPS app)

Rand McNally Market

TND™ Tablet User Manual 64

For more information

• Rand McNally Website

www.randmcnally.com/trucking

• Support

www.randmcnally.com/support

• GPS accessories

store.randmcnally.com

• Facebook

www.facebook.com/randtrucking

9. More Information

TND™ Tablet User Manual 65

Trademarks

Rand McNally, the Rand McNally logo, the globe logo, and IntelliRoute

are registered trademarks and TND is a trademark of RM Acquisition LLC,

d/b/a Rand McNally.

The Trucker’s Friend and National Truck Stop Directory are

registered trademarks of TR Information Publishers.

TruckDown is a registered trademark of TruckDown Info International, Inc.

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

InfoGation is a registered trademark of InfoGation Corporation.

Local search information provided by CityGrid Media.

Weather data provided by myweather.com.

Fuel prices provided by OPIS.

Trafﬁc information provided by INRIX, Inc.

Rand McNally follows a continuous improvement process and reserves

the right to provide enhancements that may not be reﬂected in the

pictures and speciﬁcations in this manual.

The information contained herein may be changed at any time without

prior notiﬁcation. Neither this manual nor any parts thereof may be

reproduced for any purpose whatsoever without the express written

consent of Rand McNally, Inc., nor may it be transmitted in any form

either electronically or mechanically, including photocopying, and

recording. All technical speciﬁcations, drawings, etc. are subject to

RM Acquisition 1000AA TND Tablet User Manual manual

RM Acquisition LLC TND Tablet manual

manual

Navigation menu

Namespaces

Views

Navigation