RM Acquisition 1000AA TND Tablet User Manual manual

RM Acquisition LLC TND Tablet manual

manual

Download: RM Acquisition 1000AA TND Tablet User Manual manual
Mirror Download [FCC.gov]RM Acquisition 1000AA TND Tablet User Manual manual
Document ID3094836
Application IDPyw8tNtIS7jWLYu2N0i1jA==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize470.08kB (5876017 bits)
Date Submitted2016-08-11 00:00:00
Date Available2016-08-11 00:00:00
Creation Date2015-02-11 11:29:53
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2016-08-11 04:29:40
Document Titlemanual
Document CreatorAdobe InDesign CC 2014 (Macintosh)

This portable transmitter with its antenna has shown compliance with FCC’s SAR
limits for general population / uncontrolled exposure. The maximum listed SAR level
is0.512W/kg. The antenna used for this device must not be co-located or operating in
conjunction with any other antenna or transmitter
FCC Compliance Statement
IC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device complies with Part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions:
1. This device may not cause interference, and
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and may cause harmful
interference to radio communications if not installed and used in
accordance with the instructions. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
onnect the equipment into an outlet that is on a different circuit
Connect
from the GPS unit.
•
Consult the dealer or an experienced radio/TV technician for help.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC Caution
Intentional or unintentional changes or modifications to the equipment
not expressly approved by Rand McNally could void the user’s authority
to operate the equipment.
IC attestation de conformité
Ce dispositif est conforme à la norme FCC Partie 15 et aux norme(s)
RSS permis-exempte(s) d’Industrie Canada. L’opération est soumise
aux deux conditions suivantes:
3. Ce dispositif ne peut pas provoquer d’interférence nocive et
4. Ce dispositif doit accepter toute interference reçue, y compris
les interférences qui peuvent causer un mauvais fonctionnement
du dispositif.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Attention
Les changements ou modifications à l’équipement, que ce soient
intentionnelles ou non, non expressément approuvés par Rand McNally
pourraient annuler l’autorisation de l’utilisateur à utiliser cet équipement.
IC: 10199A-01001A
TND™ Tablet User Manual
About GPS
The Global Positioning System (GPS) is a constellation of satellites that
a GPS receiver uses to calculate geographical positions. To determine
a position, data from at least three satellites is required. To determine
elevation, the data from four or more satellites is required. Accuracy of
the positioning varies from 10 feet to several hundred feet, depending
on vehicle placement and the surrounding environment.
Geographical terrain (such as mountains), man-made structures (such as
highway overpasses, bridges, and tall buildings), as well as weather
can interfere with the GPS signal. For best GPS reception, position the
device and mount with a clear line of sight to the sky. Some vehicles
may have a limited view of the sky due to metal sun shields or a
metallized windshield coating.
Map data includes the geographical coordinates for address locations
and points of interest (POIs). With GPS reception, your device calculates
a route to your selected location.
Customer Support
Call toll-free:
800-333-0136
Service hours:
Monday through Friday, 7 a.m. to 6 p.m. CT
(Except official holidays)
E-mail:
TNDSupport@randmcnally.com
TND™ Tablet User Manual
ii
Table of Contents
1. Your Device		....................................................................................................... 1-3
D. Maps & Routing .........................................................................................39-45
Safety Information .................................................................................................... 1
		 Route Map Window ........................................................................................... 39
What’s Included ..................................................................................................... 2
		 Exits Quick View................................................................................................. 40
Install the Mount....................................................................................................... 2
		 Directions Slide-Out List .................................................................................... 41
TND™ Tablet hardware............................................................................................... 3
		 Virtual Dashboard ......................................................................................... 42-43
2. Getting Started ...................................................................................................4-9
Connecting to Wi-Fi ................................................................................................. 4
		 Junction View, Turn View ................................................................................... 44
		 Location and Route Options ............................................................................... 45
Registration				 .......................................................................................................... 4
E. Tools & Features..........................................................................................46-57
Using Android		 .......................................................................................................... 5
		 Weather				........................................................................................................ 46
Settings					.......................................................................................................6-8
		Traffic					
................................................................................................... 47-48
Main Menu				.......................................................................................................... 9
3. Truck GPS				................................................................................................... 10-57
A. Main Menu ......................................................................................................11
Fuel Prices			 ........................................................................................................ 49
		 Truck Tools ........................................................................................................ 50
		 Timers 				........................................................................................................ 51
		 Mileage 				........................................................................................................ 52
		Trails					
........................................................................................................ 53
B. Settings 			....................................................................................................12-18
Fuel Logs				 ........................................................................................................ 54
		 Guide to Truck Tools and Device Preferences ...................................................... 12
		 Quick Planner ................................................................................................... 55
Truck Info			 ........................................................................................................ 13
		 Road Atlas Information ...................................................................................... 56
		 Warnings			........................................................................................................ 14
		 Calendar 			........................................................................................................ 57
		 General Preferences ...................................................................................... 15-16
		 Notepad				........................................................................................................ 57
		 Route Preferences .............................................................................................. 17
		 Unit Converter.................................................................................................... 57
		 Map Preferences ................................................................................................ 18
C. Destinations................................................................................................ 19-38
Calculator			 ........................................................................................................ 57
F. Tell Rand			........................................................................................................ 58
		 Helpful Tips ........................................................................................................ 20
		 New Location ................................................................................................ 21-24
		 Address Book ................................................................................................ 25-26
		 Multi-Stop Trips ............................................................................................. 27-29
		 Tap Map 			........................................................................................................ 30
		 Avoid List			........................................................................................................ 31
		 Points of Interest (POIs) ................................................................................. 32-35
		 Local Search	 . ....................................................................................................... 36
4. TripMaker®			 ........................................................................................................ 59
5. Motor Carriers’ Road Atlas ................................................................................. 60
6. Dash Cam			 ........................................................................................................ 61
7. Preloaded Apps .................................................................................................... 62
8. Rand McNally Market ........................................................................................... 63
		 Confirmation Windows ...................................................................................... 37
		 Toll Costs, Route Compare ................................................................................. 38
TND™ Tablet User Manual
9. More Information ................................................................................................. 64
iii
1. Your Device
Caution: Important Safety Information
Navigation
•
Use this device at your own risk.
•
Use this device only when it is safe to do so.
•
Look at the display only when it is safe to do so.
•
Traffic regulations always have priority over any instructions
from the navigation system.
Device
•
Do not use sharp-edged objects on the device touch screen.
•
The device is not waterproof and is not protected against
water damage.
•
Protect the device from extreme temperatures. Operating
temperature for the device is between 32 degrees F and
120 degrees F.
•
Do not open the navigation device casing.
•
Follow navigation system instructions only when local regulations
and road traffic allow you do so.
•
Do not attempt to replace the battery. Contact Rand McNally
Customer Support with questions about the battery.
•
Make sure that the mount is securely mounted and properly
adjusted before each trip.
•
Always follow local regulations when disposing of this device.
•
Note: If you do not understand the spoken instructions or are
unsure of what to do next, refer to the navigation map on your
navigation device.
•
Note: Make sure that there are no kinks in the cable and that
it will not be damaged by any sharp objects.
•
Note: Use only a moist cloth to clean the navigation device.
•
Note: Do not pull the cable to unplug the unit.
Installation
•
Make sure that the mount does not impair the driver’s visibility.
•
Do not attach the mount within the airbag deployment zone.
•
When installing the mount, make sure that it does not pose a risk
in the event of an accident.
•
Do not run cables directly next to safety-relevant devices and
power supplies.
•
After installation, check all safety-relevant equipment.
•
Connect the wall charger to a 120V or 240V outlet only.
•
Connect the vehicle charger to a 12V outlet only.
TND™ Tablet User Manual
1. Your Device
What’s Included
Install the Mount
Rand McNally TND™ Tablet
Note: Follow all local regulations governing the placement of the mount.
• Two-piece mount:
- Magnet with GPS boost
- Bracket with suction cup
• Quick Start Guide
• Anti-glare screen protector
• Vehicle charger
• Wall charger
• USB cable
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Attach the two pieces of the mount together.
5. Adjust the angle of the mount.
6. Pull the suction cup lever up to release suction.
7. Plug the power cord into the mount and the vehicle’s 12-volt
power source.
8. Place and hold the mount suction cup against the
mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Snap the tablet onto the mount.
11. Adjust the tablet so that it can be easily seen and does not
block the driver’s line of sight.
TND™ Tablet User Manual
1. Your Device
TND™ Tablet Hardware
Volume
Down Up
Power
Dash cam
Mini HDMI
(video out)
Micro USB
(power)
SD card
Video in
Micro USB
(power)
Audio out
Main Menu
TND™ Tablet User Manual
2. Getting Started
Connecting to Wi-Fi
When you first turn on your tablet, you’ll be asked to select a Wi-Fi
network to connect to the Internet. A Wi-Fi connection is required
to browse the web, download apps, and use Internet-enabled features
such as weather and traffic. Choose your wireless access point or
hotspot from the list and type in your password.
Note: If you skip this step, you will not be able to use all the features
of your tablet. The Truck GPS app, however, does not require a
Wi-Fi connection.
Registration
In the next step, you’ll be prompted to register your tablet with
Rand McNally. Your registration ensures that you have access to
the latest information and updates, as well as customer support.
TND™ Tablet User Manual
2. Getting Started
Using Android
Swipe down at left
to view notifications
Swipe down at right
to view settings
GPS is on
Wi-Fi is on
Indicates remaining battery power
Current time
View installed apps
Tap or swipe right to view second home screen
Back
Return to last home screen
View open apps
TND™ Tablet User Manual
2. Getting Started
Settings
Swipe down from the right to view quick settings:
TND™ Tablet User Manual
•
Brightness
•
Wi-Fi – Shows available networks
•
Auto-rotation – Controls whether the screen rotates
when you rotate the tablet
•
Battery power
•
Airplane mode – Turns off Wi-Fi and data transmission
•
Bluetooth – Pairs other devices
•
Location – Set mode (high accuracy recommended)
•
Screenshot – Saves an image of the current screen
•
Volume
2. Getting Started
All Settings
Wireless and Networks
•
Wi-Fi – View and connect to available Wi-Fi networks.
•
Bluetooth – Pair with another device using Bluetooth.
•
Data usage – Monitor how much data has been used by different apps.
Device
TND™ Tablet User Manual
•
Home – Select a different launcher. This will change the home screen
that appears when the tablet powers on.
•
Sound – Set volumes for different features and enable/disable sounds.
•
Display – Set brightness, wallpaper, and appearance.
•
Storage – View how much internal storage is available on your tablet.
•
Battery – View time spent on battery and battery power used
by different apps.
•
Apps – View apps. Swipe right to view: downloaded, on SD card,
running, all.
2. Getting Started
All Settings
Personal
•
Location – View location mode, requests, and reporting.
High accuracy mode is recommended.
•
Security – Enable screen security (each time the screen turns on)
and encryption (each time the tablet powers on). Also view
passwords, device administration, and credential storage.
•
Language & input – Set language and keyboard information,
as well as speech options and pointer speed.
•
Backup & reset – Back up the data stored on your tablet.
Accounts
•
Add accounts – Add your email or other accounts.
System
TND™ Tablet User Manual
•
Date & time – Set date and time, time zone, and clock format.
•
Accessibility – Enable spoken feedback to help blind and
low-vision users.
•
Printing – Enable printing services.
•
About tablet – View network status and version numbers.
2. Getting Started > Main Menu
IntelliRoute® TND™ Main Menu (See page 11.)
TripMaker®
Use the online planning tool to plan a trip with multiple via points
and transfer it to the navigation app as a multi-stop trip. (See help
available online.)
Motor Carriers’ Road Atlas (See page 60.)
Dash Cam (See page 61.)
Fuel Manager (For assistance with Fuel Manager and all other apps,
see help within each app.)
The bottom three buttons on the home screen can be changed according
to your preferences. (To replace with other apps, open the app tray by
tapping the upper right corner of the screen. Select Rand McNally
Launcher and Truck Widget settings. Tap a box and select a shortcut, or
tap applications to view more. Tap Save.)
TND™ Tablet User Manual
3. Truck GPS
Notes on using the Truck GPS app:
• When your tablet is attached to the magnetic mount, the GPS boost
within the mount will provide accurate GPS location, even without a
Wi-Fi connection.
• Weather, traffic, fuel prices, and local search within the Truck GPS app
require a Wi-Fi connection.
• To exit the Truck GPS app at any time, swipe down from the top of the
screen or up from the bottom to view the Android menu bars. Or tap
the main menu button on the front of the device.
TND™ Tablet User Manual
10
3A. Truck GPS > Main Menu
IntelliRoute® TND™ Main Menu
Driver Info
Switch between two driver profiles, for team driving. Turn team driving
on in Preferences > General. (See page 15.)
Load Option*
Specify in Preferences whether the trailer is always loaded or
whether you want to be prompted each time a route is calculated.
(See page 15.) (Does not display if load option is set to
Always Loaded.)
Driver Status*
Select driver status.
Note: Set Driver Status to Automatic to start/stop driving timers when
the vehicle moves/stops. (See page 16). However, when the driver status
is set to Automatic mode, tapping the driver status buttons on the
Main Menu temporarily overrides the automatic setting.
 ruck Tools
Select to enter truck information, set warnings, and access other tools.
(See page 13.)
Go To Map
Tap to view location on the map.
 hoose Destination
Tap to select an address or point of interest (POI).
Preferences
Tap to set device, route, or map options. (See page 12.)
Mute/Unmute the Speaker
Tap to mute or unmute spoken instructions.
Note: You can also tap this icon when it appears on the map screen
to mute/unmute.
Volume
Tap to increase or decrease spoken instructions volume.
*Note: Not available in Car Mode.
TND™ Tablet User Manual
11
3B. Settings
1. Tap
and
to view the options.
2. Tap the option to be set.
3. Enter the new information.
4. Tap Back
Page
Truck Info
Hazmat Type...........................................13
Height ..................................................13
Number of Axles.....................................13
Trailers ..................................................13
Truck ETA Adjustment.............................13
Weight (Empty) ......................................13
Weight (Loaded) ....................................13
Width ..................................................13
Warnings
Auto Dismiss Warnings...........................14
Construction Area..................................14
State or Province Border/
			 Time Zone Change Warning ...........14
Curve Warnings......................................14
Driving Day.............................................14
Driving Session........................................14
Engine Brake Warnings...........................14
Hill Warnings .........................................14
Narrow Road Warnings..........................14
On Duty Day ..........................................14
On Duty Week .......................................14
Speed ..................................................14
Speed Limit Display ................................14
State/Province Border Alert ....................14
Toll Booth Alert ......................................14
Warning/Alert Prompts ..........................14
Warning Display Size..............................14
Weigh Station ........................................14
TND™ Tablet User Manual
Page
General
to save changes.
Truck Tools
Device Preferences
Align screen ...........................................16
Brightness ..............................................15
Clock Setting .........................................16
Contact & About....................................16
Day/Night Map Color .............................15
GPS Status .............................................16
Keyboard ...............................................16
Language ...............................................16
Load Option ...........................................16
Mileage Log ...........................................15
My Custom POIs ....................................15
Reset Truck Timers .................................15
Screen Click ...........................................16
Screen Snapshot Button ........................16
Shortcut Button .....................................16
Skin Style - Day ......................................15
Skin Style - Night ...................................15
Team Driving...........................................15
Tutorial ..................................................16
Units 		 ..................................................16
Update Driver Status ..............................15
Vehicle Type ...........................................15
Voice Name ...........................................16
Yard Time Zone ......................................15
Device Preferences
Page
Route
Cross-Country Borders ...........................17
Dirt Roads ..............................................17
Fast Recalc .............................................17
Ferries ..................................................17
Freeways ................................................17
Junction View Distance...........................17
Manage Avoid List .................................17
Recalculation .........................................17
Route ..................................................17
Tollways .................................................17
Truck ETA Adjustment............................ 17
Tunnels ..................................................17
Turn Announcements.............................17
Turn View Distance ................................17
U-Turns ..................................................17
Map
Address Book Icons ................................18
Bus Icon..................................................18
Car Icon .................................................18
Map Auto Zoom ....................................18
Map Style ..............................................18
POI Icons ................................................18
Route Color ...........................................18
Truck Icon ..............................................18
Truck POI Icons ......................................18
12
3B. Settings
Truck Info
Options
Truck Info
Options
Hazmat Type
None
Explosives
Gases
Flammable Liquids
Flammable Solids
Oxidizers
Poison
Radioactive
Corrosives
Other
PIH
Width
Use the + and - buttons or enter a numeric
value by tapping the calculator.
Trailers
Straight
48’
53’
Double
Triple
ETA Adjustment
Increase ETA more
Increase ETA some
ETA ok
Decrease ETA some
Decrease ETA more
Weight (Empty)
Use the + and - buttons or enter a numeric
value by tapping the calculator.
Weight (Loaded)
Use the + and - buttons or enter a numeric
value by tapping the calculator.
Set adjustments to your ETA due to weather
or traffic conditions. You can add (increase)
time to make the trip take longer or
subtract (decrease) time to make the trip
take less time.
See Load Option in
Preferences › General (page 15)
or on the Main Menu (page 11).
Height
TND™ Tablet User Manual
Use the + and - buttons or enter a numeric
value by tapping the calculator.
Number of Axles
Use the + and - buttons.
13
3B. Settings
Warnings		 Options
Warnings		
Warning/Alert Prompts
State/Province
Border Alert
Auto Dismiss Warnings
Warning Display Size
None
Audio & Visual
Visual
Audio
Never
After 10 seconds
After 30 seconds
Height and weight violations will not be
auto dismissed.
Full screen
Small bar
Height and weight restrictions will always
display in full screen.
Curve Warnings
Set warning distance to curves by using the
+ and - buttons.
Hill Warnings
Set warning distance to hills by using the
+ and - buttons.
Engine Brake Warnings
Set warning distance to locations where
engine braking is prohibited by using the +
and - buttons
Set warning distance to narrow roads by
using the + and - buttons.
Set when to be warned before reaching the
driving session limit.
Set when to be warned before reaching
the driving hours limit.
Set when to be warned before reaching the
duty hours limit.
Set when to be warned before reaching the
duty week limit.
None
Truck only (limited)
Show car (if no truck limit is available)
Narrow Road Warnings
Driving Session
Driving Day
On Duty Day
On Duty Week
Speed Limit Display
TND™ Tablet User Manual
Options
Set warning distance to state/province
borders by using the + and - buttons.
State or Province Border/
Timezone Change		Off
		On
Toll Booth Alert
Set warning distance to toll booths
		 by using the + and - buttons.
Weigh Station		
Set warning distance to weigh stations
		 by using the + and - buttons.
Construction Area		
Set warning distance to construction 		
		 areas by using the + and - buttons.
Speed		
Set warning distance to speed limit 		
		 changes by using the + and - buttons.
		 Set the amount over the posted limit at
		 which the warning appears.
		 Set a user-defined maximum speed to
		 be warned whenever the truck exceeds
		 that speed, regardless of posted
		 speed limits.
Note: To turn warnings off completely, tap the - button
until “off” displays.
14
3B. Settings
General Preferences		 Options
General Preferences		
Skin Style - Day
Brightness
Set separately for day and night modes.
My Custom POIs
Tap Manage Custom POIs to specify how 		
custom POIs are displayed on the map: set		
image, warning distance, warning type, and 		
street/city/state level map display. Tap the “x”
to delete any set of POIs.
Skin Style - Night
Vehicle Type
Ice
Carbon
Classic
Ice
Carbon
Classic
(See page 32 for Custom POIs.)
Truck
Car						 Update Driver Status
Automatic
Bus
Main Menu buttons					
Timers Inactive
Controls how routes are calculated.
Note: Some tools and settings may not
be available in car mode.
Yard Time Zone
Hawaii
Alaska
Pacific Time
Arizona
Mountain Time
Central Time
Eastern Time
Indiana (East)
Atlantic (Canada)
Newfoundland
Team Driving
Turn team driving on and set profiles
to keep separate driving timers for
two team members.
Day/Night Mode
Always day
Always night
Automatic
TND™ Tablet User Manual
Options
Specify how driver status is changed.
Note: When in Automatic mode,
tapping the driver status buttons on the
Main Menu will temporarily override
the automatic setting.
Reset Truck Timers
Automatic
Manual
Mileage Log
Truck only
Car only
Truck & Car
Don’t log mileage
(See page 52 for mileage.)
15
3B. Settings
General Preferences		 Options
General Preferences		
Load Option
Prompt
Always loaded
Screen Snapshot Button
Off
On
Specify whether mileage should be
calculated with the truck empty, always
loaded, or whether to display a prompt
for each route. When set to Prompt,
each time you tap Begin New Route,
a window displays asking if the truck is
loaded or empty.
Shortcut Button
Main Menu
Go to Map
Screen Click
Click off
Click on
Tutorial
View on-device tutorial
Keyboard
ABC
Computer (QWERTY)
Voice Name
Samantha
Tom (English only)
Claudia (No street names)
Language
English
Español
Français
Options
The shortcut button appears in the bottom
right corner of the screen.
Align screen
Calibrate the touch screen.
Note: Select this option if your device
seems to have buttons that are hard
to tap.
GPS Status
Tap to show details about your location.
Contact & About
Tap to show version information
and copyrights.
For the screen and spoken instructions.
Units
U.S. Standard
Metric
Auto Select
Clock Setting
12-hour clock
24-hour clock
TND™ Tablet User Manual
16
3B. Settings
Route Preferences		 Options
Route Preferences		
Note: The default settings for your device are already optimized for
truck routing. Use the options below to fine-tune these settings.
A route may still include a roadway or maneuver set to Avoid if the
only legal route found contains these types of roads or the route is
over several hundred miles.
Tunnels
Allow tunnels
Avoid tunnels
Manage Avoid List
Roads
States/Provinces
Areas
Routes
Truck ETA Adjustment
Recalculation
Increase ETA more (by 15%)
Increase ETA some (by 5%)
ETA ok
Decrease ETA some (by 5%)
Decrease ETA more (by 10%)
Set adjustments to your ETA due to
weather or traffic conditions. You can
add (increase) time to make the trip
take longer or subtract (decrease) time
to make the trip take less time.
Manual recalculate
Auto recalculate
Route
Fastest route
Shortest route
Freeways
Allow all (default)
Avoid freeways
Prefer freeways
Avoid small roads
Tollways
Allow tollways
Avoid tollways
U-Turns
Allow u-turns					
Avoid u-turns
Ferries
Allow ferries
Avoid ferries
Cross-Country Borders
Allow cross borders
Avoid cross borders
Dirt Roads
Allow dirt roads
Avoid dirt roads
TND™ Tablet User Manual
Options
To avoid a state or province select it from
this list. Tap on the map and select a road,
area, or route to add it to the Avoid List. Tap
the x to remove. (See page 31.)
Fast Recalc
Off
On
Fast recalc calculates a route to a midpoint
between your location and the destination,
rather than recalculating the entire route
from scratch. Best used on a long route
that has short distances between
intersections.
Turn Announcements
Set three distances at which you want
to be warned about an upcoming turn.
The first announcement will be the farthest
from the turn and the third the closest to
it.
Set the distance before the maneuver at 		
which the local street turn view screen
appears. (Note: In 3D map view, this
warning is not needed and will be
turned off.)
Turn View Distance
Junction View Distance
Set the distance before the maneuver
at which the highway junction view
screen appears.
17
3B. Settings
Map Preferences		 Options
Map Preferences		 Options
Map Style
Light
Dark
Address Book Icons
Map Auto Zoom
Off
On, auto scale
On, street scale
On, city scale
On, state scale
Set to auto scale to keep the current
vehicle position and the next turn
in the map view at all times. Set to
street/city/state scale to specify the
maximum scale of the zoom.
Note: Map redraw speed is impacted
by autozoom choice, especially when
combined with 3D map display option.
Turn it off for quicker display.
POI Icons
Off
On
Off
On
Address book entries appear as pushpin
icons unless they are assigned to a group.
Grouped entries appear as folders.
(See page 26.)
Truck Icon
Use the arrows to select different icons to
display when using the truck setting.
Use the slider to change the color.
Car Icon
Use the arrows to select different icons to
display when using the car setting.
Use the slider to change the color.
Bus Icon
Use the arrows to select different icons to
display when using the bus setting.
Use the slider to change the color.
Route Color
Use the slider to select.
Select icons to display on map
Select restaurants, banks, and consumer
POIs (“Other” category) to display on
the map. Tap any category to fill in the 		
square and display those icons.
Truck POI Icons
Off
On
Select icons to display on map
Select travel centers, service, weigh stations
and truck POIs to display on the map. Tap
any category to fill in the square and
display those icons.
TND™ Tablet User Manual
18
3C. Destinations
Destinations
To access this window from the Main Menu, tap Choose Destination.
 ack
Tap to return to the Main Menu.
 ew Location
Tap to route to a new location by address, city center, intersection,
or latitude/longitude. (See page 21.)
History
Tap to route to a recently entered location.
Address Book
Tap to view a list of saved locations. (See page 25.)
Multi-Stop Trips
Tap to view a list of saved multi-stop trips or to create a new one.
(See page 27.)
 oints of Interest/POIs
	Tap to search for a point of interest (POI) such as a gas station,
restaurant, etc. (See page 32.)
Local Search
	Tap to search for local businesses, restaurants, and more
by name or keyword. (Note: Wi-Fi connection required.)
(See page 36.)
TND™ Tablet User Manual
19
3C. Destinations
Helpful Tips on Entering Addresses
Auto-Complete Feature:
Enter the first few characters in a name and a short list displays
a couple of names that start with the typed characters.
On the keyboard, the only keys available are for the next valid
characters in a search name.
Continue entering characters until the searched-for name displays
in the list. Tap on the name to select it.
Tap to view a longer list of names
matching the typed characters.
Cities:
Tap to view a list of previously
selected locations.
Some cities with common names such as “Athens” have several types
of names associated with a city.
Add a space.
If a name does not display, continue typing characters until the name
you are looking for displays in the list.
Delete last character and move
back one space.
Type an apostrophe, hyphen,
or other symbol.
Streets:
If the next letter in the street name can not be selected on the keyboard,
tap Expand Search to search a greater area.
The Expand Search button can also help locate addresses that may actually
be in a different town, spelled slightly differently, or in a neighboring town.
Note: If you’re entering a State or County Route, it’s typically best to first
either enter the State or County initials (for example, State Road 535 would
be entered as “SR”) but you may also need to try other options, such as
“State Road” or “CA” for California, for example.
TND™ Tablet User Manual
20
3C. Destinations
TND™ Tablet User Manual
New Location
 ddress
Tap to route to an address by entering the city, street, and number,
or by entering the zip code and street. (See page 22.)
 ity Center
Tap to route to a city center. (See page 23.)
Intersection
Tap to route to two intersecting roads in a city. (See page 23.)
 ack
Tap to return to the previous window.
Enter Lat/Long
Tap to route to a location by latitude and longitude. (See page 24.)
Menu
Tap to return to the Main Menu.
21
3C. Destinations > Addresses
Search for an Address
1. Tap Choose Destination > New Location > Address.
2. Type the first few characters in the city name. As you type,
a short list of matching city names displays.
3. Tap on a city to select it.
• If the city is not displayed on the short name list, continue typing
characters in the city name or tap List to display a long list of city
names. Use the up and down arrows to view all cities/states.
Tap on a city to select it.
Note: If a city name appears twice within a state, you may need to check
both for your specific address.
4. Or tap Enter Zip Code. Type the zip code.
5. Type the first few characters in the street name, or if the next
characters of the street name cannot be selected on the keyboard,
tap Expand Search and search a wider area.
6. Tap on the street name from the displayed list.
7. Tap the house number or tap List to show a list of address ranges
and select a range. 						
Note: To enter the House Number before the street, tap this button in
step 5. This preference will be saved for subsequent address entry.
8. Tap on the street number range from the list.
The Confirmation Window displays. (See page 37.)
9. Tap Begin New Route to navigate to the location.
TND™ Tablet User Manual
22
3C. Destinations > Addresses
Route to a City Center
1. Tap Choose Destination > New Location > City Center.
2. Type the first few characters in the city name.
3. T ap on the city/state name.
The Confirmation Window displays. (See page 37.)
4. Tap Begin New Route to navigate to the location.
Route to an Intersection
5. Tap Choose Destination > New Location > Intersection.
6. Type the first few characters in the city name.
7. Tap on the city name.
8. T ype the first few characters in the primary street name, or if the next
characters of the street name cannot be selected on
the keyboard, tap Expand Search and search a wider area.
9. Tap on the street name in the list.
10. Type the first few characters in the intersecting street name.
11. Tap on the intersecting street name.
The Confirmation Window displays. (See page 37.)
12. Tap Begin New Route to navigate to the location.
TND™ Tablet User Manual
23
3C. Destinations > Addresses
Route to a Latitude/Longitude
1. Tap Choose Destination > New Location > Enter Lat/Long
2. Tap in the Latitude field.
3. Enter the latitude of the location and tap Enter.
4. Tap in the Longitude field.
5. Enter the longitude of the location and tap Enter.
6. Tap Go. The Confirmation Window displays. (See page 37.)
7. Tap Begin New Route to navigate to the location.
Note: There are two ways to enter latitude/longitude: by decimal degrees
or by degrees, minutes, and seconds.
TND™ Tablet User Manual
24
3C. Destinations > Address Book
Address Book
Add Locations to the Address Book from the Confirmation Window
(See page 37.):
1. Tap Save to Address Book.
2. Tap Yes to accept the default name or tap No to display a keyboard.
3. T ype the name of the location and tap Enter to save the location
in the Address Book. The Confirmation Window re-displays.
Entries
•
Tap Choose Destination > Address Book.
Entries are alphabetically sorted by Name.
•
To sort by Distance or Date, tap Sort By.
•
Use the up and down arrows to scroll through the list or use the
alphabet buttons on the left.
•
Tap the Search field to search the Address Book by keyword.
•
The notepad icon indicates a note has been added for this location.
Route to an Address Book Location
1. Tap Choose Destination > Address Book.
• Tap on the All Addresses tab or
• Tap on the Groups tab.
2. T ap on an address to select it.
The Confirmation Window displays. (See page 37.)
3. Tap Begin New Route to navigate to the location.
TND™ Tablet User Manual
25
3C. Destinations > Address Book
Create a Group
1.
2.
3.
4.
5.
6.
7.
T ap Choose Destination > Address Book.
Tap on the Groups tab.
Tap New Group.
Type the group name.
To select a different color folder, tap
Tap on a color, then tap Close.
When finished, tap Enter.
Tap on the
next to a group to delete the group.
Addresses will still be saved in the Address Book.
Note: You can also choose to display address book icons
on the map. (See page 18.)
Add an Address to a Group
1.
2.
3.
4.
5.
6.
Tap Choose Destination > Address Book.
Tap the Groups tab.
Tap on the group you want to add an address to.
Tap New Location.
Tap Enter New Address, History, Address Book, or POI.
If you selected:
• History, Saved, or POI, the selected location is added to
the group.
• Enter a New Address, tap Yes to accept the default name
or tap No to display a keyboard and enter a new name.
Remove an Address From a Group
1.
2.
3.
4.
5.
TND™ Tablet User Manual
T ap Choose Destination > Address Book.
Tap on the Group tab.
Tap on the Group you want to remove the address from.
Tap on the
next to the address to be removed.
Tap Yes.
26
3C. Destinations > Multi-Stop Trips
Create a Multi-Stop Trip
1.
2.
3.
4.
T ap Choose Destination > Multi-Stop Trips.
Tap New Trip.
Type the trip name.
To select a different color folder, tap
5. T ap on a color, then tap Close.
6. When finished, tap Enter.
Note: A multi-stop trip can include up to 50 stops.
Add a Stop
Note: You can add locations in the order you want to route to them
or reorder stops later (See page 28.)
From the Main Menu:
T ap Choose Destination > Multi-Stop Trips.
Tap on the route.
Tap Add Address.
To add an address, tap Enter New Address, History,
Address Book, or POI.
5. A Confirmation Window asks if you want to add another stop.
Tap:
• Yes to add another stop
• No if the route is complete.
1.
2.
3.
4.
6. Tap Back to save changes.
Remove a Stop
1. T ap Choose Destination > Multi-Stop Trips.
2. Tap on the route.
3. Tap on the
next to the stop to be removed.
4. Tap Yes.
TND™ Tablet User Manual
27
3C. Destinations > Multi-Stop Trips
Reorder Routes
Optimize Automatically
After all locations have been added to a multi-stop trip, you can run
the optimizer wizard to organize your trip.
1. Tap Choose Destination > Multi-Stop Trips.
2. Tap on the route you want to optimize.
3. Tap Reorder Trip.
4. Tap Automatic/Optimize.
5. Tap Select First Stop and select the first stop, or No Preference.
6. Tap Select Last Stop and select the last stop, or No Preference.
7. Tap Yes to return to your current location to complete the route
or No to complete the route at the last stop.
8. Tap Start Trip to begin the route.
Note: There is a limit of ten stops that can be optimized automatically.
Reorder a Route Manually
1. Tap Choose Destination > Multi-Stop Trips.
2. Tap on the route you want to optimize.
3. Tap Reorder Trip.
4. Tap Manual.
5. Tap on the stop to be moved and tap the arrows to move stops
up or down.
6. When finished, tap OK.
7. Tap Start Trip to begin the route.
TND™ Tablet User Manual
28
3C. Destinations > Multi-Stop Trips
Select and Run a Saved Route
1. Tap Choose Destination > Multi-Stop Trips.
2. Tap on the route to select it.
3. Tap Start Trip. The Confirmation Window displays. (See page 37.)
4. Tap Begin New Route to navigate to the location.
5. The IntelliRoute® TND™ calculates the route to your first stop.
When you have reached the stop, a message displays.
6. Tap:
• Next Stop - To calculate a route to the next stop in the route.
• S
 kip Next Stop - To skip the next stop and calculate a route
to the stop after the next one.
• End Current Trip - To end the route at the current stop.
Note: To view your entire trip, select Summary Map View from the
Route Display Options. (See page 41.)
Delete a Route
1. Tap Choose Destination > Multi-Stop Trips.
The Multi-Stop Trips window displays.
2. Tap on the
next to the route to be deleted.
3. A confirmation message displays.
4. Tap:
• Yes to delete the route.
• No to keep the route.
TND™ Tablet User Manual
29
3C. Destinations > Tap Map
Tap on the Map
When you tap on the map screen, the crosshairs
TND™ Tablet User Manual
display.
Add as Via
Add a via—an interim stop between the origin and the destination.
Avoid
Tap to avoid the route, road, or area, or to detour. (See page 31.)
Set Origin
Set the location as the starting point of the route.
Route to Here
Tap Begin New Route to navigate to the location.
Wi-Fi
View live information at this location with a Wi-Fi connection.
30
3C. Destinations > Avoid List
Avoid Options
Avoid List
From the map, set specific locations to avoid. Tap on the map and select
Permanent Avoid. Choose Avoid Route, Avoid Road, or Avoid Area.
Or, if the location is along an active route, choose Detour.
Avoid Route
Choose whether to avoid an upcoming distance on an active route, in
the left column, or a specific road section, in the right column. Or,
select Avoid Entire Route. The route is recalculated and the avoided
sections are added to the Avoid List, under Routes.
Avoid Route
Avoid Area
Avoid Road
Add the selected road segment to the Avoid List, under Roads. 		
(Note: Reposition the map after zooming in or out to be sure to select
the right location.) Road segments that have been permanently 		
avoided are shown in pink on the map when zoomed in. Tap on a
segment and tap Remove Avoid to remove the segment from the
Avoid List.
Detour
Detour around a road segment on an active route. The route is
recalculated, but the road segment is only avoided temporarily and
does not appear on the Avoid List. To cancel the detour, tap the icon
in the lower left-hand corner of the map screen and select Detour.
(See page 45.)
Avoid Area
Set an area on the map to avoid. Increase/decrease the size of the
area using the
and
buttons. Tap Save to add the area to the
Avoid List, under Areas. Enter a name for the area. If an active route
has been entered, the route does not recalculate. Avoided areas are
shown on the map in pink.
To remove items from the Avoid List, tap Manage Avoid List in
Preferences > Route. Tap the
to remove. Tap Roads in the Avoid
List to view avoided roads on the map. You may need to re-enter your
destination to recalculate an active route.
TND™ Tablet User Manual
31
3C. Destinations > POIs
Points of Interest (POIs)
 y Truck/Near Car
Tap to search for a point of interest near the current vehicle location.
City
Tap to search for a point of interest in a city.
 y Route
Tap to search for a point of interest along the vehicle route.
 nd of Day
Tap to search for a point of interest along the last 30 minutes of
your route. This search is based on your remaining driving hours
in Truck Tools > Timers. (See page 51.)
Note: Not available in Car mode.
TND™ Tablet User Manual
 estination
Tap to search for a point of interest near the route destination.
 ack
Tap to return to the previous window.
Custom POI
Tap to select a custom POI location.
Main Menu
Tap to return to the Main Menu.
32
3C. Destinations > POIs
TND™ Tablet User Manual
Points of Interest (POIs)
 ravel Center
Tap to search for a travel center with truck amenities.
(See page 35 to filter by amenities.)
Truck Services
Tap to search for a truck services POI.
(See page 35 to filter by amenities.)
Parking & Rest Areas
Tap to search for truck parking or a rest stop.
Weigh Station
Tap to search for a truck weigh station.
CAT Scales
Tap to search for a CAT scale location.
Dealers
Tap to search for a truck dealership.
Other Categories
Tap to select a consumer (non-truck) related point of interest.
Back
Return to previous window.
33
3C. Destinations > POIs
Other Categories
1. Tap Choose Destination > Points of Interest.
2. Select a search type (My Truck/My Car, City, My Route,
End of Day, or Destination).
3. Tap Other Categories.
4. Tap on a category. (For example, tap Hospital/Emergency.)
5. If necessary, tap on a subcategory type. (For example, tap Pharmacy.)
6. Tap on a location from the list
or
7. Tap All.
8. Tap on the Spell button to display the keyboard.
9. Type the first characters in the POI name.
10. Tap on the POI name in the displayed list.
TND™ Tablet User Manual
34
3C. Destinations > POIs
Select and Filter Travel Center Amenities and Truck Services
Truck-related Travel Center points of interest can include over 70 different
types of amenities. To select only the travel centers with the amenities that
you are interested in, filter your search results.
1. Tap Choose Destination > Points of Interest.
2. Select a search type (My Truck/My Car, City, My Route,
End of Day, or Destination).
3. Tap Travel Center or Truck Service.
4. Tap Select Services.
5. C
 lick on the check box of each amenity to be included in
the search.
6. Tap OK.
The Travel Center window displays POI locations with your
selected amenities.
7. Tap on a location from the list.
8. A check next to Filter indicates the search terms have been applied.
Tap Filter to return to general search results.
Rate a Truck Point of Interest
You can rate truck POIs from the Confirmation Window. (See page 37.)
F or each POI, the top row indicates the community rating from
fellow drivers for the point of interest. The bottom row indicates
your individual rating.
1.
2.
3.
4.
5.
TND™ Tablet User Manual
T ap on the POI Ratings button.
and
to rate the facility.
Use
Tap Create Comment and type a personal comment on the facility.
Tap Enter to save the comment.
Tap Back to save changes.
35
3C. Destinations > Local Search
Note: This feature requires a Wi-Fi connection. (See page 4.)
Use Local Search to search the Internet for a restaurant, business, or any
type of location by name, keyword, or category. Tap Choose Destination
> Local Search.
Choose whether to search:
near your truck
in a specific city
near your destination
Select a category, or tap Keywords to search using a specific name
(e.g., “Subway”) or a keyword (“sandwich”).
TND™ Tablet User Manual
Tap Nearby Food to show a list of area restaurants based
on your current location.
Tap My Local History to show a list of previous searches.
36
3C. Destinations > Confirmation Windows
Screens differ according to destination type:
New Location
Confirmation Windows
14
Truck POI
14
11
10
10
Address Book
14
11
TND™ Tablet User Manual
12
12
13
14
13
 estination Address
The selected location address.
Begin New Route
Tap to route to destination.
Compare Routes
Tap to choose between two routes (See page 38.)
Add as Via
Add this location as an interim stop between the origin and destination.
This automatically makes the current route a multi-stop trip.
(See page 27.)
Save to Address Book
Add the location to the Address Book or add to Address Book group.
(See page 25).
Atlas
Cross-reference to printed Rand McNally Motor Carriers’ Road Atlas.
(Page numbers apply to the most recent Atlas.)
Go to Map
Tap to view this location on a map.
Set Origin
Tap to set the location as the starting point of a route.
Menu
Tap to return to the Main Menu.
Details
Tap to view phone number and amenities at this location.
POI Rating
Tap to rate or add a comment to this location. (See page 35.)
Edit Entry
Rename or edit this entry in the Address Book.
Note
Add a note about this location in the Address Book.
Back
Tap to return to previous window.
37
3C. Destinations > Toll Costs, Route Compare
Toll Costs
From the destination confirmation screen, tap Begin New Route.
If the calculated route includes tolls, a message appears.
Use Current Route
Show estimated toll costs and continue along the calculated route.
Compare Routes
Compare the calculated toll route to an alternate route without tolls.
(See below.)
Don’t Prompt for Tolls
Use the current route and disable this prompt for subsequent route
calculations.
Note: You can re-enable this prompt in Preferences > General. 		
(See page 15.)
Route Compare
1. From the destination confirmation window, tap Compare Routes
to calculate and display two routes and choose between them.
2. Choose to ignore tolls and calculate two routes based solely on
route preferences, or to calculate a primary route (which may
include tolls) and an alternate route without tolls.
3. The top of the screen displays the total distance and time for each
route, as well as any estimated toll costs. Zoom in to get a closer
look at each route on the map.
4. Tap either button at the top of the screen to select that route.
If the route includes tolls, estimated toll cost will display.
TND™ Tablet User Manual
38
3D. Maps & Routing
Route Map Window
 urrent Mile Marker
	Tap to open a “Tell Rand” message.
10
14
 urrent Information
View current information by city, street, or upcoming intersection. Also
displays advanced lane guidance and weather overlay key, when enabled.
Tap to change. (Note: For some destinations, the “Am I close?” feature
counts down addresses as the vehicle approaches.)
City, county, and state
13
15
12
16
17
Next intersecting street name
11
10
 ext Maneuver
Tap to repeat spoken next maneuver instructions.
11
L ocation and Route Options
Tap to see current location information, change route settings, detour,
cancel a route, and manage avoided roads. (See page 45.)
12
 urrent Speed
Tap to display the Virtual Dashboard. Turns red for speed warnings.
(See page 42.)
13
Speed Limit
Orange for truck limit; white for general limit.
Tap to open a "Tell Rand" message about speed limits.
14
 ap View Tab
Tap to simplify the map screen. Icons are minimized to show simply
the zoom, next maneuver, and miles/time.
15
 raffic
Tap to view the Traffic window. (See page 47.)
16
Mute
 oad Name
Name of street you will turn onto next.
 iles/Time
	Displays remaining distance. Tap to select from: yard arrival time,
arrival time, remaining time, yard time, and elevation.
4 Exits Quick View
	Slide out to show upcoming exit information. (See page 40.)
 irections Slide-Out List
Tap to select a route display option. (See page 41.)
Zoom In/Zoom Out
Main Menu
 ompass Direction
	Tap to change the map display. An icon in the upper right corner
displays the selected option: North up (N), heading up (arrow),
or 3D (3). Also displays Wi-Fi status.
TND™ Tablet User Manual
Advanced lane guidance
Current street name
17 	Wi-Fi
Tap to access Wi-Fi connected features.
17
39
3D. Maps & Routing
Exits Quick View
Slide out to show Points of Interest and amenities at upcoming exits.
The list displays the distance to the next exit, exit name and number,
and a count of available amenities.
1. Tap on an exit to bring up the list icon
2. Tap the icon to display locations by category.
3. Tap on any item in the list to route to that location.
TND™ Tablet User Manual
40
3D. Maps & Routing
Highway View
Directions Slide-Out List
Route Display Options
1. When first opened, the slide-out list displays in Detail View showing
each maneuver.
2. Use
and
to view the instructions.
3. To change the display option, tap Route Display Options.
See Highway View, Trip Summary (for multi-stop trips),
and Summary Map View at left.
Rise/Set
	Displays the times of sunrise and sunset for your current location.
Trip Summary (for multi-stop trips)
 PH
Displays the current vehicle speed, in miles per hour.
Distance, Time
Displays remaining distance and time.

4 Distance
	Displays the distance for each road segment.
Summary Map View (entire trip)
5 Street/Road Name
	Displays the street name you will be on after performing the next
maneuver. Tap on any item in the list to view it on the map and to
detour around it if necessary. (Note: For multi-stop trips, highways in
each leg are listed, color-coded by segment.)
Total Distance and Time
Total distance and time for the entire trip.
Leg
	Number of the leg and distance.
TND™ Tablet User Manual
L eg Destination
Leg destination.
41
3D. Maps & Routing
Virtual Dashboard
To show the Virtual Dashboard, tap the Current Speed.
Current direction of travel.
Displays current times at the yard, current location
and destination, as well as estimated time of arrival.
Sunrise and sunset times based on vehicle location
(latitude/longitude) and day.
Current speed (above) and posted speed limit (below).
Tap here
Note: Turns red when speed limit warning exceeded.
(See page 14 to set speed limit alert.)
12
Elevation at current location.
Percentage of current trip completed, distance to next maneuver,
and the number of miles and time spent on the trip to this point.
Match with truck’s odometer to automatically update new fuel logs.
Tap the pencil to edit.
Return to the Route Map Window.
Gather trip information for up to three trips.
Includes odometer settings, hours, and speeds.
10
Reset trip information for the selected trip (Tab 1, Tab 2 or Tab 3).
(See page 43.)
11
Select to automatically reset the information in each tab after
the vehicle has remained stationary for the specified number of hours.
12
View fuel logs and add fuel purchase information.
TND™ Tablet User Manual
10
11
42
3D. Maps & Routing
Manually Reset Trip Information
1. Tap on the tab you want to reset.
2. To set the odometer for the selected tab back to zero,
tap Reset All.
3. Information is captured as you travel the route.
Automatically Reset Trip Information
To reset trip information after the vehicle has remained stationary after
a specific number of hours:
1. Tap on the tab you want to reset.
2. Tap Auto Reset.
3. Tap
to increase the number of hours.
4. Tap
to decrease the number of hours.
5. To save changes, tap Change.
6. The Tab displays the auto reset number of hours.
TND™ Tablet User Manual
43
3D. Maps & Routing
Junction View
 hen on a route, Junction View displays when you have an upcoming
maneuver. Set distance in Preferences > Route. Once past the maneuver,
Junction View closes and the previous window displays.
Signs to follow for the next maneuver.
Number and direction of lanes for the next maneuver.
Distance to the upcoming maneuver. Distance decreases as you
approach the ramp.
Lane assist arrow.
Mute the speaker.
Return to previous window.
Turn View
Displays for upcoming turns. Set distance in Preferences > Route.
TND™ Tablet User Manual
44
3D. Maps & Routing
10
11
Location and Route Options
Nearest cross street
Current road you’re on, current town you’re in
Latitude and longitude at current location
Current location by mile marker
Return to previous window
Detour
12
Around Part of the Route
1. O
 n the left side of the Window, tap the number of miles
on the route to be avoided.
2. The route is recalculated.
Around a Specific Roadway
1. On the right side of the Window, tap
a list of roads in the current route.
and
to view
2. T ap on one or more roadways to be avoided.
appears in front of each selected road.
A check mark
3. Tap Detour to recalculate the route.
Note: Tap Cancel Detour to remove detours.
TND™ Tablet User Manual
Detour the entire route and add it to the avoid list. (See page 31.)
Skip to next stop (for multi-stop trips).
Cancel current route.
10
Save current location to the Address Book. (See page 25.)
11
Access list of avoided roads. (See pages 17, 31.)
12
Access Route Preferences. (See page 17.)
45
3E. Tools & Features
Weather
Notes:
•
•
•
This feature requires a Wi-Fi connection.
The refresh speed of the weather display is dependent on the
connection speed. Weather information is updated every few
minutes while Wi-Fi connection is active.
Weather display depends on active weather patterns and
map zoom level.
To view current weather information and the three-day forecast for
your location, tap the Wi-Fi icon ( ) on the map screen and
tap the Weather tab.
View details for current weather alerts.
View weather information at your destination.
Note: You can view weather information at any other location
by tapping the map and then the Wi-Fi icon and the Weather icon.
Select type of weather overlay to display on the map.
Select from a variety of weather types:
•
•
•
•
•
•
•
•
•
•
No weather (turn off)
Traffic impact
Temperature
Feels like
Current precipitation intensity and type
Probability of precipitation
Forecasted precipitation intensity, type, and clouds
Forecasted precipitation intensity and type
Dew point
Relative humidity
• Wind speed
Tap to re-display city, street, or intersection.
TND™ Tablet User Manual
Slide to adjust the transparency of the overlay on the map.
Note: Use the slider to readjust for visibility when switching
between day and night modes.
46
3E. Tools & Features
Traffic Everywhere
Traffic
Download Traffic Everywhere and Predictive Traffic in the Rand McNally
Market. (See page 63.)
Note: Requires a Wi-Fi connection.
on the map screen.
To view traffic information, tap the Traffic icon
(The icon changes with traffic conditions.) Select Traffic Everywhere for
current conditions or Predictive Traffic to view typical conditions by day/time.
 ptional Route
Tap to select either a recalculated route based on traffic events
or to stay on the current route.
 raffic on Route
Tap to view traffic events along your route.
 raffic List
Tap to view a list of traffic events in the area.
 ack
Tap to return to the previous screen.
Traffic Source
Tap to change.
Menu
Tap to return to the Main Menu.
Day/Time
Choose the day of the week. Use the arrows to set the time.
Detailed list
Tap any item to view on the map and detour if necessary.
(Note: You can also tap icons on the map to view details.)
Flow
Check to display traffic flow in the list and on the map.
Predictive Traffic
Traffic Details
10
TND™ Tablet User Manual
Incidents
Check to display incidents in the list and on the map.
10
47
3E. Tools & Features
Traffic Icons
Accident
Accident
Incident
Closure
Carriageway
Exit blocked
Entrance blocked
Traffic
Carpool
Road work
Temperature
Chance of precipitation
Delay
Cancel
Obstruction
Wind
Travel time
TND™ Tablet User Manual
Dangerous
Road condition
Activities
Security
Size/weight limit
Visibility
Heavy
traffic
Moderate
traffic
Light
traffic
48
3E. Tools & Features
Fuel Prices
Note: This feature requires a Wi-Fi connection.
To show fuel prices, tap the Wi-Fi icon on the map screen and
tap the Fuel Prices tab.
TND™ Tablet User Manual
Displays stations and prices, with distance as the crow flies.
Check to show the icons and prices on the map screen.
Sort by distance or price.
Apply filters for type of fuel and specific brand.
Check to show fuel prices along the route.
49
3E. Tools & Features
Note: Some features are not available in Car Mode.
Truck Tools
10
 ack
Return to the Main Menu.
 ruck Info
Enter truck information (weight, length, etc.). (See page 13.)
Timers, Mileage, Trails, and Fuel
View driving, on-duty, and maintenance timers; state logs; trails;
and fuel purchase information. (See pages 51-54.)
11
Warnings
	Set warning distances for driving time, duty hours, and upcoming
weigh stations. (See page 14.)
Quick Planner
	Between any two cities or towns, quickly calculate the distance,
driving time, and cost. (See page 55.)
Rand Motor Carrier’s Road Info
View Rand McNally Truck Emergency contact information and
truck regulations. (See page 56.)
 ell Rand
	Compose a message to send to Rand McNally when you
connect to the Dock. (See page 58.)
Calendar (See page 57.)
Notepad (See page 57.)
Converter (See page 57.)
	Quickly convert distance, weight, and temperature.
10
11
TND™ Tablet User Manual
Calculator (See page 57.)
50
3E. Tools & Features
Timers
Note: Odometers count up and record the current mileage. Maintenance
counters count down. When a maintenance timer counts down to 2,000
miles, a reminder displays each time the TND starts.
1. Tap Truck Tools.
2. Tap Timers, Mileage, Trails, Fuel.
3. Tap the Timers tab.
Tap the driver profile on the bottom left to switch between two team drivers.
On the left, use the Change To field to make adjustments to
mileage or hours. The mileage/hours continue to count down
from the changed value.
1. Tap -- to decrease the setting.
2. Tap + to increase the setting.
3. Tap the calculator to display a keyboard. Enter a number and tap Enter.
4. Tap Change.
 n the right, use the Reset To field to set the most common reset
value, normally zero. At the beginning of each day or run,
tap Reset to set the value back to zero for odometers and 15,000
or 35,000 for maintenance odometers.
1. Tap -- to decrease the setting.
2. Tap + to increase the setting.
3. Tap the calculator to display a keyboard. Enter a number and tap Enter.
4. Tap Reset.
TND™ Tablet User Manual
51
3E. Tools & Features
Mileage
1. Tap Truck Tools.
2. Tap Timers, Mileage, Trails, Fuel.
3. Tap the Mileage tab to view list of logs for the current year,
ordered by quarter.
4. To view quarterly mileage logs for previous years, tap Year.
Tap on a quarter to view log entries.
5. Tap on a quarter to view details. Tap View by Date/View by State
and Empty/Loaded for more information.
To delete a log, tap on the
Tap Yes to delete the log.
next to the log entry to be deleted.
Note: Load Option and Driver Status control how logs are recorded.
(See pages 15-16.)
TND™ Tablet User Manual
52
3E. Tools & Features
Trails
Use Trails to record a “bread-crumb” path of GPS coordinates where
your truck has traveled.
1. Tap Truck Tools.
2. Tap Timers, Mileage, Trails, Fuel.
3. Tap the Trails tab.
4. To record a trail, tap New Trail.
5. To end the trail, tap the Trails icon on the map screen.
6. The trail is recorded in the Trails tab.
7. Tap on a trail to view details.
8. Tap Show on Map to display the trail on the map screen.
9. Tap Edit Name to change the name of the trail.
10. Tap Set Color to change the color of the trail.
Note: The Trails feature is also accessible from the Address Book.
(See page 25.)
TND™ Tablet User Manual
53
3E. Tools & Features
Fuel Logs
1. Tap Truck Tools.
2. Tap Timers, Mileage, Trails, Fuel.
3. Tap the Fuel tab to view a list of fuel logs by quarter.
4. Tap Add Fuel to record the date, location and cost of fuel purchase.
5. Tap on any field to edit.
6. Check Taxable to include the purchase in the fuel log.
7. Tap Save (Note: Fuel economy is calculated automatically.)
8. Once fuel purchases have been entered, tap on a quarter to view
the details.
9. You can View by State or View by Month.
10. Tap the state or month to view fuel purchases.
11. Tap View All to see all fuel purchases.
TND™ Tablet User Manual
54
3E. Tools & Features
Quick Planner
Use this tool to quickly estimate the mileage and time between any
two cities or towns.
1. Tap Truck Tools.
2. Tap Quick Planner.
The revenue or cost per mile used in the last computation displays.
3. Tap From City 1 and select the city.
4. Tap To City 2 and select the city.
5. The distance displays.
6. Tap Cost per Mile and enter the per mile rate or tap Total and
enter the total amount.
7. Tap the new dollar amount and tap Enter.
8. The dollar amounts readjust automatically.
9. Tap Average Speed (MPH) enter a speed:
• Tap -- or + to decrease or increase the speed.
• Tap the calculator to enter a speed.
10. Tap Change.
11. The driving time displays.
TND™ Tablet User Manual
55
3E. Tools & Features
Road Atlas Information
To reference the Rand McNally Motor Carriers’ Road Atlas:
1. Tap Truck Tools.
2. Tap Road Atlas Information.
3. Select the appropriate country tab.
4. Select the appropriate state/province to view emergency
and other key phone numbers.
TND™ Tablet User Manual
56
3E. Tools & Features
Calendar
1. Tap Truck Tools.
2. Tap Calendar.
3. Use the arrows to view other months and years.
4. Tap Today to return to the current date.
Notepad
1. Tap Truck Tools.
2. Tap Notepad.
3. Tap New Note.
4. Tap a note in the list to view and edit.
Unit Converter
5. Tap Truck Tools.
6. Tap Converter.
7. Tap on the first field and select the type of conversion to perform.
8. Tap on the second field and enter the value to be converted.
9. Tap Enter.
Calculator
1. Tap Truck Tools.
2. Tap Calculator.
TND™ Tablet User Manual
57
3F. Tell Rand
Tell Rand
Enter messages for Rand McNally regarding construction, truck restrictions,
addresses, your device, and more.
1. Tap Truck Tools.
2. Tap Tell Rand. On the left side, tap Current Location.
Enter Different Location or Find Location on Map.
Note: You can open a Tell Rand speed limit message by tapping
the speed limit or mile marker on the map screen.
3. If you selected Enter Different Location, enter it as an address.
If you selected Find Location on Map, tap on the map to set the
crosshairs at that location, then tap Back.
4. On the right side, tap the type of message you want to send.
5. Type your message.
6. Tap Enter to save the message.
7. To
 discard the message and return to the previous window,
tap Back.
8. To send the message, be sure your device is connected to
the Internet.
TND™ Tablet User Manual
58
4. TripMaker®
TripMaker is a trip planning app that allows you to easily browse the map
and set up a multi-stop trip. Add via points and send your trip to the
Truck GPS app for truck-friendly routing.
Please note that TripMaker does not provide truck routing.
View Help in the TripMaker app to learn more.
TND™ Tablet User Manual
59
5. Motor Carriers’ Road Atlas
A digital version of Rand McNally’s Motor Carriers’ Road Atlas.
Tap Maps at the top right to select pages by state.
TND™ Tablet User Manual
60
6. Dash Cam
Records a video loop as you drive. Tap the red button to record again
to stop.
Tap the menu icon at the top right to access preferences for video quality,
audio, and segments.
TND™ Tablet User Manual
61
7. Preloaded Apps
Your TND™ Tablet comes preloaded with trucking apps available from our
partners. For support, view help within each app.
Fuel manager
Accounting
Load board
Document imaging
TND™ Tablet User Manual
62
8. Rand McNally Market
Additional apps are available for download in the Rand McNally Market.
Look for these complimentary apps:
•
Backup cam (requires accessory)
•
E-Logs for Rand McNally HD-100 (requires accessory)
•
Predictive Traffic (add to Truck GPS app)
•
Rand McNally Road Atlas
•
Traffic Everywhere (add to Truck GPS app)
Register to receive information and updates from Rand McNally.
Rand McNally Market
TND™ Tablet User Manual
63
9. More Information
For more information
TND™ Tablet User Manual
•
Rand McNally Website
www.randmcnally.com/trucking
•
Support
www.randmcnally.com/support
•
GPS accessories
store.randmcnally.com
•
Facebook
www.facebook.com/randtrucking
64
Trademarks
Rand McNally, the Rand McNally logo, the globe logo, and IntelliRoute
are registered trademarks and TND is a trademark of RM Acquisition LLC,
d/b/a Rand McNally.
The Trucker’s Friend and National Truck Stop Directory are
registered trademarks of TR Information Publishers.
TruckDown is a registered trademark of TruckDown Info International, Inc.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
InfoGation is a registered trademark of InfoGation Corporation.
Local search information provided by CityGrid Media.
Weather data provided by myweather.com.
Fuel prices provided by OPIS.
Traffic information provided by INRIX, Inc.
© 2015 Rand McNally. © 2015 HERE. All rights reserved.
Rand McNally follows a continuous improvement process and reserves
the right to provide enhancements that may not be reflected in the
pictures and specifications in this manual.
The information contained herein may be changed at any time without
prior notification. Neither this manual nor any parts thereof may be
reproduced for any purpose whatsoever without the express written
consent of Rand McNally, Inc., nor may it be transmitted in any form
either electronically or mechanically, including photocopying, and
recording. All technical specifications, drawings, etc. are subject to
copyright law.
TND™ Tablet User Manual
65
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2015:02:11 11:29:53-06:00
Metadata Date                   : 2016:08:11 04:29:40+08:00
Modify Date                     : 2016:08:11 04:29:40+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:46664ffe-2eac-457c-9545-a2635bffce4c
Original Document ID            : xmp.did:5650D6F17F2068118C14E16BDEB5B80C
Document ID                     : xmp.id:738c9da6-8d81-4de3-aa8a-c95e25f4933a
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:1ea3f305-5191-4d25-adb1-2d5a14ba7cd2
Derived From Document ID        : xmp.did:2d5040a0-a4aa-4169-b616-1c4bc9939036
Derived From Original Document ID: xmp.did:5650D6F17F2068118C14E16BDEB5B80C
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:02:11 11:29:53-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 71
Creator                         : Adobe InDesign CC 2014 (Macintosh)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A4C-1000AA

Navigation menu