RSI VIDEOTECHNOLOGIES OS00 Outdoor Siren User Manual
RSI VIDEOTECHNOLOGIES Outdoor Siren
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2266276 |
| Application ID | 1WS31VklJVLCX7q9uA46Lg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 45.63kB (570393 bits) |
| Date Submitted | 2014-05-14 00:00:00 |
| Date Available | 2014-05-15 00:00:00 |
| Creation Date | 2014-03-31 10:43:15 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2014-04-07 15:41:41 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC (Windows) |
OSX Outdoor Siren P R O D U C T I N S T A L L S H E E T Doc. - Ref. 216-OSX Version : March 2014 Product Presentation The OSX Outdoor Siren is designed for use with a Videofied™ wireless alarm system. Its main features are : • • • • • • Completely wireless and powered with alcaline batteries : 4 years battery life. Dual tamper function provides detection for both wall and cover tamper. Transmits check-in/status signals every 8 minutes Flash LED light 100 dBA output level at 1 m 3 to 15 minutes output and flashlights duration (according to local legislation). Installation guidelines For easier installation, programming and RF testing should be done to check for good communication between the control panel and all system devices before mounting system devices. Install the siren and other system devices in the order of the following steps : > Mounting - mount siren at the tested location. > Programming/RF Testing - program the siren and all other devices into the control panel and test RF communication from each intended device location to the control panel. Mounting > Use proper tools and hardware for mounting the unit. > Mount outdoors under eves to help prevent direct contact from elements. Mount on front of structure where strobe light is clearly visible to responding authorities. 1 Press both side buttons together to open the siren box. 2 Hold up the siren base against the mounting surface and mark the four mounting holes. 3 Drill pilot holes and install anchors where needed. 4 Place unit on mouning surface so mounting holes line up with pilot holes/anchors and secure unit with appropriate screws. Mounting holes Install 3 LR 1.5V batteries, observing correct polarity. Attach front cover and lock with the screws. www.videofied.com OSX Outdoor Siren P R O D U C T I N S T A L L S H E E T Programming/RF Testing The following provides summarized steps for device programming and testing. For complete details, refer to the control panel installation manual. 1 With the programming keypad, browse to the ADD A NEW DEVICE menu (Level 4). 2 Press OK/YES. The keypad displays PRESS PROGRAM BUTTON OF DEVICE. 3 Press and release program button on siren using a paper clip end. The siren LED flashes.Wait for keypad display to show SIREN (1 - 25) RECORDED. Press OK/YES. The display shows RADIO RANGE TEST? Press OK/YES again to run the test. The keypad display shows TEST IN PROGRESS. Make sure the siren is flashing indicating good communication with the control panel. The test result must stabilize at 8/9 minimum. Press OK/YES to end the radio range test then ESC NO. When finished, exit from configuration mode by a long press on ESC NO. Opening Button www.videofied.com INIT Button Locking Screw OSX Outdoor Siren P R O D U C T I N S T A L L S H E E T Use only the flashlights or only the output Enable delay beeps By default, the output and the flashlights are enabled when the OSX is active. You can enable one or the other. By default, delay beeps are disabled on the OSX outdoor siren. You can enable those delay beeps. Lvl. 4 Lvl. 4 CONFIGURATION CONFIGURATION OK or YES OK or YES AREAS AND DEVICES AREAS AND DEVICES OK or YES OK or YES DEVICES DEVICES OK or YES ADD A DEVICE OUT SIREN DELAY DISABLED/ENABLED DEVICE CONFIGURATION OK or YES Device list To select the siren OK or YES ALARM FLASH + SIREN Press OK or YES and use the arrows to Those functions are only available for panel firmware versions 04.03.XX.XXX and later In order to check the firmware version, enter the following code in the standby menu when the panel is DISARMED : 000000+YES select FLASH + SIREN, FLASH or SIREN www.videofied.com OSX Outdoor Siren P R O D U C T I N S T A L L S H E E T Security notes / (FR) Notes de sécurité / (DE) Hinweise zur Sicherheit English • • • • Remove battery before any maintenance ! WARNING, there is a risk of explosion if a battery is replaced by an incorrect type! Observe polarity when setting up the batteries! Do not throw used batteries! Bring them to your installer or a collection point. Français • • • • Retirez les piles avant toute opération de maintenance ! Attention ! Il y a un risque d'explosion si l'une des piles utilisées est remplacée par une pile de type incorrect ! Respectez la polarité lors de la mise en place des piles ! Ne jetez pas les piles usagées ! Ramenez-les à votre installateur ou à un point de collecte spécialisé. Deutsch • • • • Batterien vor jeglichen Wartungsarbeiten entfernen! Vorsicht, es besteht Explosionsgefahr, wenn eine Batterie durch eine Batterie falschen Typs ersetzt wird! Achten Sie beim Einsetzen der Batterien auf die Polung! Entsorgen Sie Batterien nicht im normalen Haushaltsmüll! Bringen Sie Ihre verbrauchten Batterien zu den öffentlichen Sammelstellen. FCC Regulatory Information for USA and CANADA FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI Video Technologies may void the FCC authorization to operate this equipment. FCC Part 15.105 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radio frequency radiation exposure information according 2.1091 / 2.1093 / OET bulletin 65 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la Partie 15 des règlementations de la FCC et avec la norme RSS-210 de l’Industrie Canadienne. Son fonctionnement est soumis aux deux conditions suivantes : Cet appareil ne doit pas causer d’interférences nuisibles et Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un fonctionnement indésirable. www.videofied.com OSX Outdoor Siren P R O D U C T Electrical Data I N S T A L L S H E E T Physical Data Panel Compatibility Power requirements XL, XLL XT, XV, VISIO 4.5V DC with 3 LR20, 1.5V, D size Alkaline batteries Battery life Material ABS - ULV0 Dimensions 349 mm x 232 mm x 54mm Weight 1200g (without batteries) 4 years Current consumption Standby 1400g (with batteries) Protection Marking IP44/IK08 141uA (OSX200 & OSX210) 200uA (OSX601 & OSX712) Alarm 2A RF Technology S2View® Radio type Spread spectrum bidirectionnal Installation/Mounting Cover Two side scews for cover locking Siren/Wall Four screws secure siren base to mounting surface Operating frequency 915MHz - FHSS - OSX601 (USA, Canada, South America) 920MHz - FHSS - OSX712 (Australia, South America) Transmission security Supervision AES encryption algorithm Polled signal every 8 minutes 868MHz (OSX200 & OSX210) Standards : NF EN50131-4 : 2009 Grade 2 - Type W Integrated NF EN50130-4 : 2011 Wall and cover tampered NF EN50130-5 : 2011 Class IV Antenna Tamper detection Standards & Certifications Output level 100 dBA at 1m 915MHz (OSX601) Output and flashlights duration USA FCC Part 15C (FCC47 CFR part15) 3 min by default (15 min max according to local legislation) Flashlight type LED Flashlight color Orange - OSX200 & OSX601 Blue - OSX210 & OSX712 Flashlight frequency Operating temperature Maximum relative humidity Canada IC (RSS-210 Issue 8) 920MHz (OSX712) 1 flash per second -25°/+70°C (-13°/158°F) 75%, non-condensing EMEA SALES North American Headquarters 23, avenue du Général Leclerc 92340 BOURG-LA-REINE FRANCE E-Mail : emeasales@rsivideotech.com 1375 Willow Lake Blvd, Suite 103 Vadnais Heights, MN 55110 USA E-Mail : usasales@rsivideotech.com www.videofied.com Australie C-Tick (AS-NZS4268) © 2013 RSI Video Technologies Videofied® and MotionViewer® are Registered Trademark of RSI Video Technologies. Specifications subject to change without notice. 868MHz - OSX200 & OSX210 (Europe, South Africa, Asia)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2014:03:31 10:43:15+02:00 Creator : Adobe InDesign CC (Windows) Modify Date : 2014:04:07 15:41:41+02:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2014:04:07 15:41:41+02:00 Creator Tool : Adobe InDesign CC (Windows) Instance ID : uuid:61d072ac-aa18-4978-b8ad-8219f66e5be9 Original Document ID : xmp.did:9FCEE297D587E2118041A147EF51C18F Document ID : xmp.id:22a12b28-0d4e-0642-9428-b5e823f4dbac Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0c4e3ce0-8778-7744-bb47-791865bade8f Derived From Document ID : xmp.did:fc8d0c21-46af-ad4a-8839-7acbbaac09d1 Derived From Original Document ID: xmp.did:9FCEE297D587E2118041A147EF51C18F Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC (Windows) History Changed : / History When : 2014:03:31 10:43:15+02:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 5EXIF Metadata provided by EXIF.tools