RSI VIDEOTECHNOLOGIES SD00 Smoke Detector User Manual
RSI VIDEOTECHNOLOGIES Smoke Detector
user manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2619647 |
| Application ID | 0ux8/9Cj7u0dcKWsqwrIVQ== |
| Document Description | user manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 23.29kB (291167 bits) |
| Date Submitted | 2015-05-20 00:00:00 |
| Date Available | 2015-05-21 00:00:00 |
| Creation Date | 2014-04-16 11:47:50 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2015-03-02 15:32:49 |
| Document Title | user manual.pdf |
| Document Creator | Adobe InDesign CC (Windows) |
ISD Smoke Detector P R O D U C T I N S T A L L S H E E T Doc. - Ref. 2110-ISD Version : February 2015 Installation guidelines Product presentation • • • • • Completely wireless - Battery powered with 3V Lithium battery for 2 years battery life. Dual tamper function provides detection for both wall and cover tamper. Transmits check-in/status signals every 8 minutes 85dB output level at 3m 24h detection RF testing will ensure good communication between the control panel and all system devices. Install the detector and other system devices in the order of the following steps : > Program the detector and all other devices into the control panel and test RF communication from each intended device location to the control panel. Mount the detector at the final location. Installation and Programming The following provides summarized steps for device programming and testing. Mount the base to the wall. Insert 3V DC CR123A Lithium battery , observing correct polarity and close the battery cover. Mount the detector on its base. The yellow light should switch off. With the programming keypad, browse to the ADD A NEW DEVICE menu (Level 4). Press OK/YES. The keypad displays PRESS PROGRAM BUTTON OF DEVICE. Press program button. The button blinks in green. Wait for keypad to display SMOKE DETECT. n RECORDED. Press OK/YES again to run the test. The keypad display shows TEST IN PROGRESS. Make sure the siren is flashing indicating good communication with the control panel. The test result must stabilize at 8/9 as a minimum. If the radio range level is below 8/9, change the location of the detector to obtain satisfactory radio range level. Program Button and Indicator light Press OK/YES. The display shows RADIO RANGE TEST? Indicator light > Yellow blink with 3 beeps: > Continuous yellow blink: > Red blink once every 334 seconds: Press OK/YES to end the radio range test then ESC NO. 10 Name the detector. When finished, keep ESC NO pressed to exit from configuration mode. For full programming details, please refer to the control panel installation manual. Malfunction Low Battery Normal Operation > Red blink once every 10.7 seconds: Reduced sensitivity operation (during 10 minutes) > Fixed red light with 3 loud beeps: www.videofied.com Alarm ISD Smoke Detector P R O D U C T I N S T A L L S H E E T Notes de sécurité / (EN) Security notes / (DE) Hinweise zur Sicherheit Français • • • • Retirez la pile avant toute opération de maintenance ! Attention ! Il y a un risque d'explosion si la pile utilisée est remplacée par une pile de type incorrect ! Respectez la polarité lors de la mise en place de la pile ! Ne jetez pas la pile usagée ! Ramenez-la à votre installateur ou à un point de collecte spécialisé. English • • • • Remove battery before any maintenance ! WARNING, there is a risk of explosion if a battery is replaced by an incorrect type! Observe polarity when setting up the battery! Do not throw away used battery! Dispose of it properly according to Lithium Metal requirements Deutsch • • • • Batterie vor jeglichen Wartungsarbeiten entfernen! Vorsicht, es besteht Explosionsgefahr, wenn eine Batterie durch eine Batterie falschen Typs ersetzt wird! Achten Sie beim Einsetzen der Batterie auf die Polung! Entsorgen Sie Batterie nicht im normalen Haushaltsmüll! Bringen Sie Ihre verbrauchten Batterie zu den öffentlichen Sammelstellen. FCC Regulatory Information for USA and CANADA FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI Video Technologies may void the FCC authorization to operate this equipment. FCC Part 15.105 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: > Reorient or relocate the receiving antenna. > Increase the separation between the equipment and receiver. > Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. > Consult the dealer or an experienced radio/TV technician for help. Radio frequency radiation exposure information according 2.1091 / 2.1093 / OET bulletin 65 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1 L’appareil ne doit pas produire de brouillage,et 2 L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. www.videofied.com ISD Smoke Detector P R O D U C T Electrical Data Physical Data Panel Compatibility Material Power requirements 3V DC, 1 Duracell CR123A Lithium battery 2 years (common usage) Battery life I N S T A L L ABS - ULV0 120 mm x 53 mm Dimensions 140g (without battery) Weight 156g (with battery) 2,75 V Low battery limit IP30/IK07 Protection Marking Current consumption Standby S H E E T 50µA Alarm 26mA RF Technology S2View® Radio type Spread spectrum bidirectionnal Detector and base 2 screws secure base to the mounting surface Operating frequency 915MHz - FHSS - ISD601 (USA, Canada, South America) Standards & Certifications 868MHz (ISD200) 920MHz - FHSS - ISD702 (Australia, South America) Transmission security Supervision Polled signal every 8 minutes Antenna Integrated Tamper detection EN14604 AES encryption algorithm Wall and cover tampered Output level Operating temperature Maximum relative humidity Compliant with the annex IV of the R&TTE Directive 1999/5/EC 915MHz (ISD601) 85dB at 3 meters UL217 0° / +49°C (32°/ 120°F) USA FCC (Part 15C) 85%, non-condensing Canada IC (RSS-210 Issue 8) 920MHz (ISD702) Australie C-Tick (AS-NZS4268) Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit ne doit pas être traité avec les déchets ménagers. Il doit être remis à un point de collecte approprié pour le recyclage des équipements électriques et électroniques. En s’assurant que ce produit est bien mis au rebut de manière appropriée, vous aiderez à prévenir les conséquences négatives potentielles pour l’environnement et la santé humaine. Le recyclage des matériaux aidera à préserver les ressources naturelles. Pour toute information supplémentaire au sujet du recyclage de ce produit, vous pouvez contacter votre municipalité, votre déchetterie ou la société qui a installé le produit. EMEA SALES North American Headquarters 23, avenue du Général Leclerc 92340 BOURG-LA-REINE FRANCE E-Mail : emeasales@rsivideotech.com 1375 Willow Lake Blvd, Suite 103 Vadnais Heights, MN 55110 USA E-Mail : usasales@rsivideotech.com www.videofied.com © 2013 RSI Video Technologies Videofied® and MotionViewer® are Registered Trademark of RSI Video Technologies. Specifications subject to change without notice. 868MHz - ISD200 (Europe, South Africa, Asia)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2014:04:16 11:47:50+02:00 Creator : Adobe InDesign CC (Windows) Modify Date : 2015:03:02 15:32:49+01:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:03:02 15:32:49+01:00 Creator Tool : Adobe InDesign CC (Windows) Instance ID : uuid:c7f30938-53f3-4184-991c-d7fe8a88f1ce Original Document ID : xmp.did:9FCEE297D587E2118041A147EF51C18F Document ID : xmp.id:e609f208-55e7-3c49-aff2-e95c8807a67c Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:e78d81ce-b5b9-9c4b-9a02-cb028939d1dc Derived From Document ID : xmp.did:a74a2326-14fd-1d42-a3eb-459e0ab153b9 Derived From Original Document ID: xmp.did:9FCEE297D587E2118041A147EF51C18F Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC (Windows) History Changed : / History When : 2014:04:16 11:47:51+02:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 3EXIF Metadata provided by EXIF.tools