RSI VIDEOTECHNOLOGIES SV00 Indoor Streaming Motion Viewer User Manual
RSI VIDEOTECHNOLOGIES Indoor Streaming Motion Viewer
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3285228 |
| Application ID | amT8856vTT67fe0tNPc5+g== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 141.96kB (1774486 bits) |
| Date Submitted | 2017-02-16 00:00:00 |
| Date Available | 2017-02-16 00:00:00 |
| Creation Date | 2016-11-29 12:33:15 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-11-29 12:33:33 |
| Document Title | user manual |
| Document Creator | Adobe InDesign CC 2017 (Windows) |
ISMV STREAMING MOTIONVIEWER INSTALL SHEET DOC. - REF. 212-ISMV MODIF. DATE :NOVEMBER 2016 Main features The ISMV 200/601/702 is a wireless, battery-powered, motion activated indoor video camera. It can also be activated by user request. • • • • • • • • Wireless technology for optimal security. Color video (lighted sites) or black & white (night vision). Infrared LED for night vision. Standard motion coverage lens. Wall and cover tamper. Powered by 3 Lithium CR123A batteries for extended autonomy. Device supervision every 8 minutes. Video capture and transmission in «streaming mode» on user request. Installation guidelines For an easier installation, programming and RF testing should be done to check for good communication between the control panel and all system devices before mounting. Install the detector and other system devices in the following order: Flat wall mounting holes > Programming / RF Testing: Program detector and all other devices into the control panel and test RF communication at each intended device location to the control panel. > Mounting: Mount detector at the tested location. Mounting rules > Use proper tools and hardware. > Mount indoors in a temperature controlled environment. > Mount camera 2.1m from the floor. > Respect Top and Bottom side of the Motion Viewer Corner mounting holes > When possible, mount in a wall corner in order to aim at a complete room Only use 2 of the 4 mounting holes. 1 or 2 . > Mount detector on an outside wall, aimed at area to protect. > Do not aim detector at windows, especially those that let in direct sunlight, or at heat sources such as lamps, fireplaces, radiators and heating vents. > Do not aim detector at moving objects such as curtains, fans or animals. > Do not cover the Fresnel lens. ISMV STREAMING MOTIONVIEWER INSTALL SHEET Programming / RF Testing / Mounting The following provides summarized steps for device programming,testing, and mounting. For complete details, refer to the control panel installation manual. 1 Loosen bottom screw 10 The display shows : AREA ALLOCATION : Separate base from ISMV 9 Press OK to end the radio range test then press ESC/NO. AREA : 1 Press either arrow button on the keypad until the desired AREA number appears, then press OK. By default all devices in area 1 will be subject to the entry and exit delays. 11 The screen displays NAME + LOCATION : 2 Install 3 CR123A 3V batteries, observing correct polarity. 3 Enter the panel into programming/configuration mode. 4 Using a programmed alphanumeric keypad, proceed through menus until the display shows ADD A NEW DEVICE. 5 Press OK. The display shows PRESS PROGRAM BUTTON OF DEVICE. 6 Press and release the program button on the ISMV a paper clip. The ISMV LED flashes red 4 . using Enter an appropriate device name (up to 16 characters). The name of the device should describe its intended mounting location or zone. Press OK. The display will show the device number and name for your verification. 12 Mount the ISMV on the wall: > Follow the mounting rules on page 1. > Hold the ISMV base against the mounting surface and mark the appropriate mounting holes. > Drill pilot holes and install anchors where needed. > Place the base on mounting surface so that the pilot holes line up and secure base with appropriate screws. > Attach camera to base and secure with screw if required. 13 Press OK. The display shows FUNCTIONAL DEVICE TEST? Press YES again and verify IMV operation. The red LED indicates the detection field. 14 Press OK to end the detection test. Wait for the keypad to display : CAMERA REGISTERED. 15 The display shows ADD A NEW DEVICE? Repeat steps 1-14 for remaining devices. 16 When finished, exit from configuration mode by pressing and holding the ESC/NO for 5 seconds. 7 Press OK, the keypad displays RADIO RANGE TEST ? Press OK again. The ISMV LED starts flashing and the keypad displays TEST IN PROGRESS. 8 Move the ISMV to the intended mounting location and confirm the signal is 9/9, indicating good communication with the control panel. INSTALL SHEET ISMV STREAMING MOTIONVIEWER Mounting recommendations • Recommended mounting height is 2,1 m. There may be a 1 m radius blind zone under the detector depending on the room size and detector installation height. Confirm the detection field using the functional device test. • The ISMV is fitted with a 90° wide angle lens that allows the camera to cover the full size of the area to protect. It will reduce the blind area under the detector as well. • Please mount the ISMV in an angle to optimize detection. It shall be mounted opposed to the access point or asset you need to protect. The detector should not be mounted close to a door or an access point. Such installation increase the probability of a missed intrusion. When stairs mounted, please aim the detector towards the entry or the exit of the stairwell. Detection diagram Streaming option The new ISMV MotionViewer allow the user to request a live video session. The ISMV is the first battery-powered wireless camera detector emitting on 868MHz able to provide a live video stream from its camera. The 868 MHz frequency has excellent range and allow for excellent battery-life. ISMV STREAMING MOTIONVIEWER INSTALL SHEET Security notes / (FR) Notes de sécurité / (DE) Hinweise zur Sicherheit English Français Deutsch • Remove the batteries before any maintenance ! • WARNING, there is a risk of explosion if a battery is replaced by an improper model ! • Observe polarity when setting up the batteries! • Do not litter the batteries when they are used! Dispose of them properly according to Lithium Metal requirements • Retirez les piles avant toute opération de maintenance ! • Attention ! Il y a un risque d'explosion si la batterie utilisée est remplacée par un mauvais modèle ! • Respectez la polarité lors de la mise en place des piles ! • Ne jetez pas les batteries usagées ! Ramenez-les à votre installateur ou à un point de collecte spécialisé. • Batterien vor jeglichen Wartungsarbeiten entfernen! • Vorsicht, es besteht Explosionsgefahr, wenn eine Batterie durch eine Batterie falschen Models ersetzt wird! • Achten Sie beim Einsetzen der Batterien auf die Polung! • Entsorgen Sie Batterien nicht im normalen Haushaltsmüll! Bringen Sie Ihre verbrauchten Batterien zu den öffentlichen Sammelstellen. FCC Regulatory Information for USA and CANADA FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI Video Technologies may void the FCC authorization to operate this equipment. FCC Part 15.105 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: > Reorient or relocate the receiving antenna. > Increase the separation between the equipment and receiver. > Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. > Consult the dealer or an experienced radio/TV technician for help. Radio frequency radiation exposure information according 2.1091 / 2.1093 / OET bulletin 65 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : L’appareil ne doit pas produire de brouillage, et 2 L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.. This symbol on the product or on its packaging indicates that this product should not be treated as household waste. It must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. The recycling of materials will help to conserve natural resources. For more information about recycling of this product, please contact your local municipality, your waste disposal service or the company that installed the product. The EC declaration of conformity of this product is available by flashing this QR code. ISMV STREAMING MOTIONVIEWER INSTALL SHEET ELECTRICAL PROPERTIES DETECTION PROPERTIES Panel compatibility Infrared detection specifications Technology Passive-infrared DSP XL, XLL, XT, XV, Visio and their variants W panels Type Dual element sensor 3 CR123A 3V Lithium batteries Lens Fresnel Streaming option Without streaming option Battery Nominal voltage Low battery treshold Estimated battery life Detection angle 2.7 V Detection range Up to 10m Initialization time 10 seconds Recovery time 90 seconds Up to 3 years Current consumption 100 µA Standby (1h average) 300 mA Max RADIO PROPERTIES Spread spectrum RF bidirectional Operating frequency • 868MHz - ISMV 200 (Europe, Africa, Asia) • 915 MHz - ISMV 601 (USA, Canada, South america) • 920 MHz -ISMV 702 (Australia, South america) Transmission security Supervision Radio antenna AES algorythm encryption Radio, batteries, tamper Integrated VIDEO PROPERTIES Sensor type 90° CMOS Lighted video Programmable : Color or B&W Night vision video Black & white automatic infrared Infrared illumination Infrared illumination distance Physical properties ABS UL94-V0 Material Environmental properties -10°/+55°C Operating temperature Max relative humidity 75%, without condensing Installation / Mounting Mounting height 2,10 m Wall mounting 2 screws With screw STANDARDS AND APPROVALS 868 MHz ISMV 200 Automatic with 2 IR LEDs 7m Video Video format Cover and wall tamper, electromagnetic immunity Box sealing Camera Angle Tamper Tamper detection BOX RF S2View® technology Radio type 90° 3V H264 (MPEG if not available) Compliant with annex IV from the R&TTE 1999/5/CE directive NF&A2P – 2 boucliers – suivant le référentiel NF324-H58 Matériels de sécurité electronique, détection d’intrusion DETECTEUR DE MOUVEMENT A INFRAROUGE PASSIF Marque commerciale Videofied Framerate 5 images per second Resolution QVGA (320x240) Référence produits ISMV 200 Up to 230 kB N° de certification 2623200010 Video file size NF EN50131-2-2 Grade 2 2008 RTC 50131-2-2 2015 NF EN50130-4 2011 NF EN50130-5 Environment Class II 2011 Certification organisation : CNPP Cert. Route de La Chapelle Réanville CS22265 F—27950 SAINT MARCEL Tel : +33(0)2.32.53.63.63 Fax: +33(0)2.32.53.64.46 Sites Internet : www.cnpp.com Email : certification@cnpp.com www.videofied.com Certification organisation : AFNOR Certification 11, rue François de Pressensé 93571 Saint Denis La Plaine Cedex Tel : +33(0)1.41.62.80.00 Fax: +33(0)1.49.17.90.00 Sites Internet : www.marque-nf.com E-mail : certification@afnor.org
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : fr-FR XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Instance ID : uuid:d65fb829-a2aa-45e2-b389-ace5305a4a7e Original Document ID : adobe:docid:indd:a9f13b76-a669-11dc-a793-af0db84f2b18 Document ID : xmp.id:42589e27-a752-8043-8104-acc3855bd3c9 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:d426c779-e7f8-4c47-8444-d1892edbcf13 Derived From Document ID : xmp.did:81BFD2DE7EDDE211B94DE1773AC9BDA4 Derived From Original Document ID: adobe:docid:indd:a9f13b76-a669-11dc-a793-af0db84f2b18 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2016:11:29 12:33:16+01:00 Create Date : 2016:11:29 12:33:15+01:00 Modify Date : 2016:11:29 12:33:33+01:00 Metadata Date : 2016:11:29 12:33:33+01:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 5 Creator : Adobe InDesign CC 2017 (Windows)EXIF Metadata provided by EXIF.tools