RTX R4024 DECT 6.0 Wireless Relay Station User Manual statements

RTX Hong Kong Ltd. DECT 6.0 Wireless Relay Station statements

Contents

user manual statements

Additional Information RTX4024Important safety informationCharge the repeater only in combination with RTX4024 Repeater and the Ten Pao adapter S008CM0550060 that comes with the product. Plug the Ten Pao AC/DC adaptor in a wall outlet socket near the equipment for easy access/removal of the AC/DC adaptor.Sensitive Electronic EnvironmentAny radio-based equipment can potentially cause interference with other equipment and can be interfered from other equipment. This also applies for DECT equipment. However due to the very low transmission power level the chances for interference are very small. Research proves that operational DECT Repeaters normally don’t inuence electronic equipment however some precautions must be taken into account for sensitive electronic equipment e.g. sensitive laboratory equipment. When DECT repeaters operate in straight nearness of sensitive electronic equipment incidental inuence can appear. You are advised not to place the DECT repeaters on or close (less than 10cm) to this kind of equipment, even in standby mode. Please also use the other documentation supplied with the various parts of your telephone system.Product disposal information For countries in the European Union The symbol depicted here has been afxed to your product in order to inform you that electrical and electronic products should not be disposed of as municipal waste. Electrical and electronic products including the cables, plugs and accessories should be disposed of separately in order to allow proper treatment, recovery and recycling. These products should be taken to a designated facility where the best available treatment, recovery and recycling techniques are available. Separate disposal has signicant advantages: valuable materials can be re-used and it prevents the dispersion of unwanted substances into the municipal waste stream. This contributes to the protection of human health and the environment.Please be informed that a ne may be imposed for illegal disposal of electrical and electronic products via the general municipal waste stream. In order to facilitate separate disposal and environmentally sound recycling, arrangements have been made for local collection and recycling. In case your electrical and electronic products need to be disposed of please refer to your supplier or the contractual agreements that your company has made upon acquisition of these products. For countries outside the European UnionDisposal of electrical and electronic products in countries outside the European Union should be done in line with the local regulations. If no arrangement has been made with your supplier, please contact the local authorities for further information.Regulatory information EuropeDeclaration of conformityČesky “RTX Products” tímto prohlašuje, že tento “RTX4024” je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.DanskUndertegnede “RTX Products” erklærer herved, at følgende udstyr “RTX4024” overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.DeutschHiermit erklärt “RTX Products”, dass sich das Gerät “RTX4024” in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG bendet.EestiKäesolevaga kinnitab “RTX Products” seadme “RTX4024” vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.EnglishHereby, “RTX Products”, declares that this “RTX4024” is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.EspañolPor medio de la presente “RTX Products” declara que el “RTX4024” cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.ΕλληνικήΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η “RTX Products” ΔΗΛΩΝΕΙ ΟΤΙ “RTX4024” ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.1
FrançaisPar la prsente “RTX Products” déclare que l’appareil “RTX4024” est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.ÍslenskaHér með lýsir “RTX Products” yr því að “RTX4024” er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.ItalianoCon la presente “RTX Products” dichiara che questo “RTX4024” è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.LatviskiAr šo “RTX Products” deklarē, ka “RTX4024” atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.LietuviųŠiuo “RTX Products” deklaruoja, kad šis “RTX4024” atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.Malti Hawnhekk, “RTX Products”, jiddikjara li dan “RTX4024” jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm d-Dirrettiva 1999/5/ECMagyarAlulírott, “RTX Products” nyilatkozom, hogy a “RTX4024” megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.NederlandsHierbij verklaart “RTX Products” dat het toestel “RTX4024” in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Norsk“RTX Products” erklærer herved at utstyret “RTX4024” er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.PolskiNiniejszym, “RTX Products” deklaruje, ze “RTX4024” jest zgodny z wymaganiami i innymi warunkami Dyrektywy 1999/5/EC.Português“RTX Products” declara que este “RTX4024” está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.Slovensko“RTX Products” izjavlja, da je ta “RTX4024” v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.Slovensky“RTX Products” týmto vyhlasuje, že “RTX4024” spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.Suomi“RTX Products” vakuuttaa täten että “RTX4024” tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.SvenskaHärmed intygar “RTX Products” att denna “RTX4024” står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.Intended useThese repeaters are designed for use with an RTX IP DECT phone network. Any other use is considered unintended use. RTX Products HK Ltd 11/F CAC Tower Hoi Bun RoadKwun TongHong Kong04702
3Regulatory information United StatesInterference information:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Modications not expressly approved by RTX Products could void the user’s authority to operate the equipment.Privacy of communication may not be ensured when using this equipment.Exposure to Radio Frequency (RF) SignalsThis wireless repeater is a radio transmitter and receiver. It is designed and manufacturer not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.This product has been shown to be capable of compliance for localized specic absorption rate (SAR) for uncontrolled environment/general population exposure limits specied in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specied in FCC/OET Bulletin 65 Supplement C (2001) and IEEE 1528-2003”This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
4Regulatory information CanadaInterference information:Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this equipment.Exposure to Radio Frequency (RF) SignalsThis repeater is a radio transmitter and receiver. It is designed and manufactured not to exceed this emission limit for exposure to radio frequency (RF) energy set by the Ministry of Health (Canada), Safety Code 6. These limits are part of comprehensive guidelines and established permitted levels of RF energy for the general population. These guidelines are based on the safety standards previously set by international standard bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.This device has been shown to be capable of compliance for localized specic absorption rate (SAR) for uncontrolled environmental / general public exposure limits specic in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement procedures specied in IEEE 1528-2003”This Class B digital apparatus complies with Canadian ICES-003CET appareil numérique de la classe B est conforme á la norme NMB-003 du CanadaThis device is exempted from RF Exposure Evaluation to Industry Canada requirements since the output power complies with the power levels of section 2.5.2 of RSS-102 Issue 4.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) 'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Privacy of communications may not be ensured when using this telephone. Les communications effectuées au moyen de cet appareil ne sont pas nécessairement protégées des indiscrétions.

Navigation menu