RTX R4024 DECT 6.0 Wireless Relay Station User Manual statements

Download:
Mirror Download [FCC.gov]
Document ID	1675250
Application ID	FWLieQZLvtTlsf3j4ephFQ==
Document Description	user manual statements
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.36kB (191975 bits)
Date Submitted	2012-04-12 00:00:00
Date Available	2012-04-16 00:00:00
Creation Date	2012-01-13 18:12:35
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 50.0) (Apr 13 2010; 21:08:12)]
Document Lastmod	2012-03-30 17:38:51
Document Title	user manual statements
Document Creator	RAD PDF

Additional Information RTX4024
Important safety information
Charge the repeater only in combination with RTX4024 Repeater and the Ten Pao adapter S008CM0550060 that comes
with the product. Plug the Ten Pao AC/DC adaptor in a wall outlet socket near the equipment for easy access/removal of
the AC/DC adaptor.
Sensitive Electronic Environment
Any radio-based equipment can potentially cause interference with other equipment and can be interfered from other
equipment. This also applies for DECT equipment. However due to the very low transmission power level the chances
for interference are very small. Research proves that operational DECT Repeaters normally don’t influence electronic
equipment however some precautions must be taken into account for sensitive electronic equipment e.g. sensitive
laboratory equipment. When DECT repeaters operate in straight nearness of sensitive electronic equipment incidental
influence can appear. You are advised not to place the DECT repeaters on or close (less than 10cm) to this kind of
equipment, even in standby mode. Please also use the other documentation supplied with the various parts of your
telephone system.
Product disposal information
For countries in the European Union
The symbol depicted here has been affixed to your product in order to inform you that electrical and electronic
products should not be disposed of as municipal waste.
Electrical and electronic products including the cables, plugs and accessories should be disposed of separately in order
to allow proper treatment, recovery and recycling. These products should be taken to a designated facility where the best
available treatment, recovery and recycling techniques are available. Separate disposal has significant advantages:
valuable materials can be re-used and it prevents the dispersion of unwanted substances into the municipal waste
stream. This contributes to the protection of human health and the environment.
Please be informed that a fine may be imposed for illegal disposal of electrical and electronic products via the general
municipal waste stream. In order to facilitate separate disposal and environmentally sound recycling, arrangements
have been made for local collection and recycling. In case your electrical and electronic products need to be disposed
of please refer to your supplier or the contractual agreements that your company has made upon acquisition of these
products.
For countries outside the European Union
Disposal of electrical and electronic products in countries outside the European Union should be done in line with the
local regulations. If no arrangement has been made with your supplier, please contact the local authorities for further
information.
Regulatory information Europe
Declaration of conformity
Česky
“RTX Products” tímto prohlašuje, že tento “RTX4024” je ve shodě se základními požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Dansk
Undertegnede “RTX Products” erklærer herved, at følgende udstyr “RTX4024” overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Deutsch
Hiermit erklärt “RTX Products”, dass sich das Gerät “RTX4024” in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
Käesolevaga kinnitab “RTX Products” seadme “RTX4024” vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, “RTX Products”, declares that this “RTX4024” is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Español
Por medio de la presente “RTX Products” declara que el “RTX4024” cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η “RTX Products” ΔΗΛΩΝΕΙ ΟΤΙ “RTX4024” ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
Par la prsente “RTX Products” déclare que l’appareil “RTX4024” est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Íslenska
Hér með lýsir “RTX Products” yfir því að “RTX4024” er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í
tilskipun 1999/5/EC.
Italiano
Con la presente “RTX Products” dichiara che questo “RTX4024” è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
Ar šo “RTX Products” deklarē, ka “RTX4024” atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to
saistītajiem noteikumiem.
Lietuvių
Šiuo “RTX Products” deklaruoja, kad šis “RTX4024” atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos
nuostatas.
Malti
Hawnhekk, “RTX Products”, jiddikjara li dan “RTX4024” jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn
relevanti li hemm fid-Dirrettiva 1999/5/EC
Magyar
Alulírott, “RTX Products” nyilatkozom, hogy a “RTX4024” megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
Nederlands
Hierbij verklaart “RTX Products” dat het toestel “RTX4024” in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG.
Norsk
“RTX Products” erklærer herved at utstyret “RTX4024” er i samsvar med de grunnleggende krav og øvrige relevante
krav i direktiv 1999/5/EF.
Polski
Niniejszym, “RTX Products” deklaruje, ze “RTX4024” jest zgodny z wymaganiami i innymi warunkami Dyrektywy 1999/5/EC.
Português
“RTX Products” declara que este “RTX4024” está conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE.
Slovensko
“RTX Products” izjavlja, da je ta “RTX4024” v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive
1999/5/ES.
Slovensky
“RTX Products” týmto vyhlasuje, že “RTX4024” spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice
1999/5/ES.
Suomi
“RTX Products” vakuuttaa täten että “RTX4024” tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Svenska
Härmed intygar “RTX Products” att denna “RTX4024” står I överensstämmelse med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Intended use
These repeaters are designed for use with an RTX IP DECT phone network. Any other use is considered unintended
use.
0470
RTX Products HK Ltd
11/F CAC Tower
Hoi Bun Road
Kwun Tong
Hong Kong
Regulatory information United States
Interference information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by RTX Products could void the user’s authority to operate the equipment.
Privacy of communication may not be ensured when using this equipment.
Exposure to Radio Frequency (RF) Signals
This wireless repeater is a radio transmitter and receiver. It is designed and manufacturer not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety standards previously set by both U.S. and international
standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons,
regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.
This product has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled
environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in
accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE
1528-2003”
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antenna
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or transmitter.
Regulatory information
Canada
Interference information:
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
Privacy of communications may not be ensured when using this equipment.
Exposure to Radio Frequency (RF) Signals
This repeater is a radio transmitter and receiver. It is designed and manufactured not to exceed this emission limit for
exposure to radio frequency (RF) energy set by the Ministry of Health (Canada), Safety Code 6. These limits are part of
comprehensive guidelines and established permitted levels of RF energy for the general population. These guidelines
are based on the safety standards previously set by international standard bodies. These standards include a substantial
safety margin designed to assure the safety of all persons, regardless of age and health.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled
environmental / general public exposure limits specific in ANSI/IEEE C95.1-1992 and had been tested in accordance
with the measurement procedures specified in IEEE 1528-2003”
This Class B digital apparatus complies with Canadian ICES-003
CET appareil numérique de la classe B est conforme á la norme NMB-003 du Canada
This device is exempted from RF Exposure Evaluation to Industry Canada requirements since the output power
complies with the power levels of section 2.5.2 of RSS-102 Issue 4.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) 'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Privacy of communications may not be ensured when using this telephone.
Les communications effectuées au moyen de cet appareil ne sont pas nécessairement protégées des
indiscrétions.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Creator                         : RAD PDF
Modify Date                     : 2012:03:30 17:38:51+08:00
Create Date                     : 2012:01:13 18:12:35+08:00
Page Count                      : 4
Tagged PDF                      : Yes
XMP Toolkit                     : XMP Core 4.1.1
Creator Tool                    : RAD PDF
Metadata Date                   : 2012:01:13 18:12:35+08:00
Document ID                     : uuid:3061e29d-7092-393d-b46a-495a775c6f1b
Format                          : application/pdf
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 50.0) (Apr 13 2010; 21:08:12)]

EXIF Metadata provided by EXIF.tools