RTX R4024 DECT 6.0 Wireless Relay Station User Manual

RTX Hong Kong Ltd. DECT 6.0 Wireless Relay Station

Contents

user manual

Download: RTX R4024 DECT 6.0 Wireless Relay Station User Manual
Mirror Download [FCC.gov]RTX R4024 DECT 6.0 Wireless Relay Station User Manual
Document ID1675249
Application IDFWLieQZLvtTlsf3j4ephFQ==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize13.37kB (167182 bits)
Date Submitted2012-04-12 00:00:00
Date Available2012-04-16 00:00:00
Creation Date2012-02-24 08:48:44
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2012-02-24 08:48:44
Document Titleuser manual
Document CreatorMicrosoft® Office Word 2007
Document Author: Rune Strøm Jensen

How to register repeater and firmware update over air.
Register repeater
1.
2.
3.
Login to base.
Select page “Repeaters”
Select “Add Repeater”
4.
Select “DECT Sync mode”
Manually:
User controlled by manually assign “Repeater RPN” and “DECT sync source RPN”
Local Automatical:
Repeater controlled by auto detects best base signal and auto assign RPN.
Chaining Automatical:
Base controlled by auto detects best base or repeater signal and auto assign RPN.
Manually mode
Page 1 of 4
Select “RPN”
SINGLE CELL SYSTEM:
The base has always RPN00, first repeater will then be RPN01, second repeater RPN02 and third RPN03 (3 repeaters
maximum per base)
MULTI CELL SYSTEM:
Bases are increment by 2^2 in hex, means first base RPN00 second base RPN04 etc., in between RPN01, 02, 03
addressed for repeaters at Primary base and 05, 06, 07 addressed for Secondary base (3 repeaters maximum per base)
Select “DECT sync source”
What base or repeater the repeater has to be synchronize on.
Example of 2 bases in chain and 2 repeater chains.
3 repeaters chained at Primary base.
Repeater1
Repeater2
Repeater3
3 repeaters chained at Secondary base.
Repeater4
Repeater5
Repeater6
To edit repeater mode - select index.
Page 2 of 4
Local Automatical
Repeater controlled by auto detects best base signal and auto assign RPN.
Repeater on base only, repeater on repeater (chain) not supported.
Repeater RPN dynamic assigned in base RPN range.
Chaining Automatical
Base controlled by auto detects best base or repeater signal and auto assign RPN.
Repeater on base or repeater, repeater on repeater (chain) supported.
Repeater RPN static assigned from base.
5.
6.
Check “Idx 0”
Select link “Register Repeater(s)”
7.
Power on repeater placed near base.
(default registration mode if production unit)
LED green double flash: Registration mode - if not then press reset button for 4 seconds.
LED green steady:
Within a minute the repeater should be registered successful.
LED red steady:
Registration timeout, press reset button 4 sec. or power cycle repeater.
(Base open 5 minutes for repeater registration)
To see Repeater signal strength in handset enable “Site survey mode” via hidden menu.
Press key: [MENU] *7378423*
Handset scans and list from left the RPN of base and repeater, below RPN is signal strength in –dbm.
Successful registration.
Page 3 of 4
Firmware update (FWU) Repeater
1.
2.
TFTP firmware server, create directory “DECT4024” at same root as “Beatus” directory.
Copy Repeater firmware “DECT4024_Vxxxx.fwu” to directory “DECT4024”
3.
4.
5.
6.
Select page “Firmware Update”
Set “Firmware update server address” and “Firmware path” according to TFTP server installation.
Type “DECT4024” firmware version.
Press “Save”
7.
8.
Select page “Repeaters”
Select “Refresh”
(Update FWU progress and FW Info)
After approx. 15 minutes FWU reached 100% and repeater reboots in new firmware version with progress complete.
Page 4 of 4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
Language                        : da-DK
Tagged PDF                      : Yes
Author                          : Rune Strøm Jensen
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2012:02:24 08:48:44+01:00
Modify Date                     : 2012:02:24 08:48:44+01:00
Producer                        : Microsoft® Office Word 2007
EXIF Metadata provided by EXIF.tools
FCC ID Filing: T7HR4024

Navigation menu