R222.302.702 R222302702EN

: Radiall R222302702En R222302702EN coaxialconnectors tds

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

Technical Data Sheet
BULKHEAD STRAIGHT MALE JACK SMOOTH BORE SOLDER TYPE CABLE .085

PAGE 1/3

ISSUE 1438C

SERIES SMP

PART NUMBER R222302702

All dimensions are in mm.
.
pn

.
ao

COMPONENTS
Body
Center contact
Outer contact
Insulator
Gasket
Others parts
-

MATERIALS
STAINLESS STEEL + BRASS
BERYLLIUM COPPER
PTFE
BRASS
-

PLATING (µm)
PASSIVATED+GOLD1.3 OVER NICKEL2
GOLD 1.27 OVER NICKEL 1.27
-

NICKEL 2
-

This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written
agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.

Technical Data Sheet
BULKHEAD STRAIGHT MALE JACK SMOOTH BORE SOLDER TYPE CABLE .085

PAGE 2/3

ISSUE 1438C

SERIES SMP

PART NUMBER R222302702

PACKAGING
Standard
100

Unit
Contact us

Other
Contact us

ELECTRICAL CHARACTERISTICS
Impedance
Frequency
1.50 +
VSWR
Insertion loss
RF leakage
-(
Voltage rating
Dielectric withstanding voltage
Insulation resistance

50
0-40
0,0000
0.12
335
500
5000

ENVIRONMENTAL

Ω
GHz
x F(GHz) Maxi
√F(GHz) dB Maxi
- F(GHz)) dB Maxi
Veff Maxi
Veff mini
MΩ mini

NA
NA
NA

°C
Atm.cm3/s

SPECIFICATION

MECHANICAL CHARACTERISTICS
Center contact retention
Axial force – Mating End
Axial force – Opposite end
Torque

-65/+165
NA
NA

Operating temperature
Hermetic seal
Panel leakage

CABLE ASSEMBLY
N mini
N mini
N.cm mini

Stripping
mm

a
1,3

b
0

c
0

d
0

e
0

f
0

Assembly instruction:
Recommended torque
Mating
Panel nut
Clamp nut
A/F clamp nut
Mating life
Weight

NA
60
NA
0,0000
1000
1,1300

N.cm
N.cm
N.cm
mm

Cycles mini
g

Recommended cable(s)
RG 405
KS 1
Characteristics indicated on this data sheet are those that can be achieved with the highest
performance cable. Intrinsic limitations of the cable may diminish the performance of the
assembly

Cable retention
- pull off
- torque

200
NA

N mini
N.cm

TOOLING
Part Number
R282051000
R282062010
R282743100
R282744254
R282862120
R282740000

Description
STRIPPING TOOL
POINTER GAUGE
POSITIONER FOR SOLDERING SMP
POSITIONER FOR SOLDERING SMP
SOLDER GAUGE THCK 1.83
SOLDERING MOUNTING

Hexagon

OTHER CHARACTERISTICS
RF leakage-80dB DC-3GHz
-65dB 3-26.5 GHz
Compliant with MIL-STD-348

This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written
agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.

Technical Data Sheet
BULKHEAD STRAIGHT MALE JACK SMOOTH BORE SOLDER TYPE CABLE .085

PAGE 3/3

ISSUE 1438C

SERIES SMP

PART NUMBER R222302702

COMPONENTS

STRIPPING CABLES
Body

Center contact

Insulator
a

We recommend a thermal preconditionning cable

1

3

Strip the dielectric of the cable .
Clean the cable .
Soldering 180°c
Temperature stoking do not exceded 250°c

After cooling remove cable assembly from the jig.
Insert cable+centre contact in the connector.
Slide the positioner in the connector interface.
Slide cable into the connector body until it bottoms
against.
Slide positioner into the assembly.
Tighten.
Solder the body onto the cable.
After cooling remove cable assembly from the jig.

Tighten

Solder

Connector

2
Screw the positioner onto the soldering jig.
Slide the center contact onto the cable inner conductor
against insulator.
Fit the cable assembly onto the soldering jig.
Insert the soldering gauge
Tighten.
Take off the soldering gauge.
and solder the contact.

Cable in
position
Soldering jig

Positioner

Tighten
Cable

1.83 Soldering gauge

Soldering jig
Insulator

Solder

Center contact

Positioner

This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written
agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 19094b07-461e-11e4-0000-04c3931dad11
Producer                        : GPL Ghostscript 9.02
Keywords                        : ()
Modify Date                     : 2014:09:24 10:12:43+02:00
Create Date                     : 2014:09:24 10:12:43+02:00
Creator Tool                    : PDFCreator Version 1.2.1
Document ID                     : 19094b07-461e-11e4-0000-04c3931dad11
Format                          : application/pdf
Title                           : R222.302.702
Creator                         : varroz_n
Description                     : ()
Author                          : varroz_n
Subject                         : 

EXIF Metadata provided by EXIF.tools