R222.302.702 R222302702EN

2014-11-25

: Radiall R222302702En R222302702EN coaxialconnectors tds

Open the PDF directly: View PDF PDF.
Page Count: 3

Technical Data
Sheet
BULKHEAD STRAIGHT MALE JACK SMOOTH BORE SOLDER TYPE CABLE .085
PAGE
1
/
3
ISSUE
1438C
SERIES
SMP
PART NUMBER
R222302702
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written
agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
All dimensions are in mm.
. .
pn ao
COMPONENTS MATERIALS PLATING (
µ
m)
Body
PASSIVATED+GOLD1.3 OVER NICKEL2
Center contact
BERYLLIUM COPPER
GOLD 1.27 OVER NICKEL 1.27
Outer contact
-
-
Insulator
PTFE
Gasket
-
Others parts
BRASS
NICKEL 2
- - -
- - -
Technical Data
Sheet
BULKHEAD STRAIGHT MALE JACK SMOOTH BORE SOLDER TYPE CABLE .085
PAGE
2
/
3
ISSUE
1438C
SERIES
SMP
PART NUMBER
R222302702
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written
agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
PACKAGING
Standard Unit Other
100
Contact us
Contact us
ELECTRICAL CHARACTERISTICS
Impedance
50
Ω
Frequency
0
-
40
GHz
VSWR
1.50
+
0,0000
x F(GHz) Maxi
Insertion loss
0.12
√
F(GHz) dB Maxi
RF leakage - (
- F(GHz)) dB Maxi
Voltage rating
335
Veff Maxi
Dielectric withstanding voltage
500
Veff mini
Insulation resistance
5000
M
Ω
mini
MECHANICAL CHARACTERISTICS
Center contact retention
Axial force – Mating End
NA
N mini
Axial force – Opposite end
NA
N mini
Torque
NA
N.cm mini
Recommended torque
Mating
NA
N.cm
Panel nut
60
N.cm
Clamp nut
NA
N.cm
A/F clamp nut
0,0000
mm
Mating life
1000
Cycles mini
Weight
1,1300
g
ENVIRONMENTAL
Operating temperature
-
65/+165
°C
Hermetic seal
NA
Atm.cm3/s
Panel leakage
NA
SPECIFICATION
CABLE ASSEMBLY
Stripping
a b c d e f
mm
1,3
0
0
0
0
0
Assembly instruction:
Recommended cable(s)
RG 405
KS 1
Characteristics indicated on this data sheet are those that can be achieved with the highest
performance cable. Intrinsic limitations of the cable may diminish the performance of the
assembly
Cable retention
- pull off
200
N mini
- torque
NA
N.cm
TOOLING
OTHER CHARACTERISTICS
RF leakage-80dB DC-3GHz
-65dB 3-26.5 GHz
Compliant with MIL-STD-348
Part Number Description Hexagon
R282051000 STRIPPING TOOL
R282062010 POINTER GAUGE
R282743100 POSITIONER FOR SOLDERING SMP
R282744254 POSITIONER FOR SOLDERING SMP
R282862120 SOLDER GAUGE THCK 1.83
R282740000 SOLDERING MOUNTING
Technical Data
Sheet
BULKHEAD STRAIGHT MALE JACK SMOOTH BORE SOLDER TYPE CABLE .085
PAGE
3
/
3
ISSUE
1438C
SERIES
SMP
PART NUMBER
R222302702
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written
agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Body Center contact
COMPONENTS
1
2
Strip the dielectric of the cable .
Clean the cable .
Soldering 180°c
Temperature stoking do not exceded 250°c
Screw the positioner onto the soldering jig.
Slide the center contact onto the cable inner conductor
against insulator.
Fit the cable assembly onto the soldering jig.
Insert the soldering gauge
Tighten.
Take off the soldering gauge.
and solder the contact.
After cooling remove cable assembly from the jig.
Insert cable+centre contact in the connector.
Slide the positioner in the connector interface.
Slide cable into the connector body until it bottoms
against.
Slide positioner into the assembly.
Tighten.
Solder the body onto the cable.
After cooling remove cable assembly from the jig.
We recommend a thermal preconditionning cable
STRIPPING CABLES
a
Insulator
Tighten Solder Connector
Positioner
Soldering jig
Cable in
position
3
Insulator
Soldering jig
Cable
Tighten
Solder
Positioner
1.83
Soldering gauge
Center contact

Navigation menu