Radio Shack 15 1186 Users Manual

15-1186 to the manual 3f7c9fda-331c-4d4c-8001-0bfb8420eb95

2015-01-21

: Radio-Shack Radio-Shack-15-1186-Users-Manual-352754 radio-shack-15-1186-users-manual-352754 radio-shack pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadRadio-Shack Radio-Shack-15-1186-Users-Manual- 15-1186  Radio-shack-15-1186-users-manual
Open PDF In BrowserView PDF
15-1186.fm Page 1 Thursday, July 15, 1999 1:47 PM

Cat. No. 15-1186
To mount the TV FM Flush Mount Wall Plate:
1. If there is no wall box, cut a 13/ 4 ¥ 4 inch hole in the
wall at the desired location.
2. Across the top of the hole, position a flat bracket
piece against the inner wall surface and an angled
bracket piece against the outer wall surface (with the
recessed part inside the hole).

(L) illus of hole on wall w/
dimension lines
(R) illus of wall cross-sect
w/brackets and screws;
size to fit text margins
3. Thread two of the supplied long bolts through the
two outer holes on the bracket pieces.
4. Repeat Steps 2 and 3 across the bottom of the hole
so the center hole in the bottom bracket is 31/4
inches below the center hole in the top bracket (to
match the distance between the mounting holes on
the wall plate).
Custom Manufactured in Taiwan for RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102

15-1186.fm Page 2 Thursday, July 15, 1999 1:47 PM

illus of hole on wall w
brackets in place
size to fit text
margins
5. Use a Phillips screwdriver to loosen the two screws
on the back of the wall plate. Connect the antenna
cable/wires from inside the wall to the rear connectors on the plate, then retighten the screws.
Warning: Be sure the exposed portions of the
cables/wires do not touch each other.
6. Use the two supplied short screws to secure the
plate to the center holes of the brackets.
7. Use a flat-bladed screwdriver to loosen the screws
at the back of the supplied three-prong cable plug.
Connect the 300-ohm antenna wire from the audio
and video outputs of the TV (or the left and right
channels of the FM radio) to the plug, then retighten
the screws.
8. Insert the plug into the wall plate’s jack.

12A98

Printed in Taiwan



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 1999:07:15 13:49:41Z
Creator                         : PSCRIPT.DRV Version 4.0
Modify Date                     : 2003:09:03 09:07:55-05:00
Page Count                      : 2
Page Layout                     : SinglePage
Creation Date                   : 1999:07:15 13:49:41Z
Producer                        : Acrobat Distiller 3.01 for Windows
Mod Date                        : 2003:09:03 09:07:55-05:00
Metadata Date                   : 2003:09:03 09:07:55-05:00
Title                           : 15-1186.fm
EXIF Metadata provided by EXIF.tools

Navigation menu