Radius Networks RBT003 RadBeacon Locator Tent User Manual

Radius Networks, Inc. RadBeacon Locator Tent Users Manual

Users Manual

Bluetooth Smart 5.0 proximity beacon powered by 1 CR2477 Lithium battery with tentform factor for extended battery life and a waterproof enclosure.The idea is to redesign the electronics to use a larger battery.The tent beacon has an accelerometer to extend battery life by trigger on accelerometer event.The tent enclosure should be really waterproof to allow the tents to be washed in the restaurant.Category Requirement Additional Detail Partner CommentsBluetooth Bluetooth Low Energy v5.0 Advertising Extensions, GATTServices, L2CAP ChannelsMicroprocessor ARM Cortex M4 This is based on the NordicNRF52832 SOC as a likelycandidate architecture. Open toalternativesFlash 512kB of flash memory This is based on the NordicNRF52832 SOC as a likelycandidate architecture. Open toalternativesRAM 64kB RAM This is based on the NordicNRF52832 SOC as a likelycandidate architecture. Open toalternativesRange 100m at max tx power This is based on the NordicNRF52832 SOC as a likelycandidate architecture. Open toalternativesAntenna Trace or Chip,OmnidirectionalSensor Accelerometer Motion and fall detection triggeredPower Source 1 x CR2477 1 x 1,000 mAhBatteryLife 12 Months Based on 100Hz advertisingrate at+3dBm TX PowerEnclosure IP67 RatedEnclosure UL 94 V-0 Flame RatedFirmware Multiple interleaved iBeacon, AltBeacon, AltBeaconadvertisements TLM, Eddystone UID, EddystoneURL, Eddystone TLM, EddystoneEID, Eddystone ETLMModel: RBT-003 User ManualRadBeacon Locator Tent
eIC StatementThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subjectto the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that maycause undesired operation of the device.The term “IC: “ before the certification/registration number only signifies that the IndustryCanada technical specifications were met. This product meets the applicable IndustryCanada technical specifications.Le présent appareil est conforme aux CNR d'Industrie Canada applicable aux appareilsradio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage,et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même sile brouillage est susceptible d'en compromettre le fonctionnementFCC StatementChanges or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates uses and can radiate radio frequency energy and, if not installedand used in accordance with theinstructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or t levision reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-- Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC rules. Operation is subject to the followingtwo conditions (1)this device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation

Navigation menu