Rapoo Technology 03036IV 2.4GHz Nano Receiver User Manual

Shenzhen Rapoo Technology Co., Ltd 2.4GHz Nano Receiver

User Manual

Shenzhen Rapoo Technology Co.,Ltd. Jacalyn Liu Page 1 of 4 5/16/2011 Quick Start Guide Of 2.4GHz Wireless Notebook Touch Mouse Rev: 1.00 2.4GHz Nano Receiver FCC ID:PP203036IV
Shenzhen Rapoo Technology Co.,Ltd. Jacalyn Liu Page 2 of 4 5/16/2011 Installation 1. Plug the Nano receiver into a USB port of your computer. 2. Push the mouse power switch on. 3. Click the button to connect. Mouse Functions Left Click It’s a point-and-click mouse, and you can click anywhere on its multi-touch surface with a finger or two fingers. Click in the left click area to realize left button function. (Left click area is anywhere except right click area.) Right Click Click in the right click area to realize right button function with a finger. Scroll and Tilt Single finger swipes on the surface of the mouse like the blue cross showed in the picture. If you swipe in horizon direction, it equals the Tilt function. And if you swipe in vertical direction, it equals the scroll wheel function of a normal mouse. Note: 1.Scroll is to zoom in/out in Windows Picture and Fax Viewer and Windows Photo Viewer (Win7). 2. Tilt is only available in Windows Vista and Windows 7 without driver. Left Click Right Click Scroll + Tilt Screen Zoom
Shenzhen Rapoo Technology Co.,Ltd. Jacalyn Liu Page 3 of 4 5/16/2011 Screen Zoom Function Hold down the Control key on your keyboard and scroll with one finger on the Mouse to enlarge items on your screen. Back and Forward Using two fingers, swipe left and right along the Multi-Touch surface to advance through pages in internet explorer or browse photos in picture manager. It equals the back and forward function of a normal mouse. Trouble Shooting 1. Check Nano receiver connection; try to inserting Nano Receiver to another USB port on your computer. 2. Connection between the mouse and the Nano Receiver. Re-insert the Nano Receiver. Take out the battery and reinstall it. Note This device complies with Part 15 of the FCC rules. Operation subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Back and Forward
Shenzhen Rapoo Technology Co.,Ltd. Jacalyn Liu Page 4 of 4 5/16/2011 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).

Navigation menu