Rapoo Technology M6126G 2.4GHz Wireless Super Mini Laser Mouse User Manual Users manual
Shenzhen Rapoo Technology Co., Ltd 2.4GHz Wireless Super Mini Laser Mouse Users manual
Users manual
Trouble Shooting
1. Check Nano receiver connection; try to insert Nano
Receiver to another USB port on your computer.
2. Check to see if the batteries in the mouse are installed
correctly. Make sure the polarity of the batteries
corresponds with the polarity signs in the battery
compartment.
3. Replace the batteries to make sure the batteries are not
low on power.
Quick Start Guide
Of
2.4GHz Wireless Super Mini Mouse
P/N: 266-80260-2008
4 1
Installation
1. Plug the Nano receiver into a USB port of your
computer.
2. Push the Battery Cover Switch aside, open the battery
door and install battery, then close the battery cover.
Receiver storage and ON/OFF the mouse
1. You can store or take out the Nano receiver from the
Nano receiver storage by push/pull the Nano receiver.
2. You can switch On or shut off the mouse by use the
ON/OFF switch on the bottom of the mouse.
Mouse Functions
Speed Control
Press the CPI button and you can toggle the CPI between 800
CPI and 1600 CPI.
2 3
Installation
1. Plug the Nano receiver into a USB port of your
computer.
2. Push the Battery Cover Switch aside, open the battery
door and install battery, then close the battery cover.
Receiver storage and ON/OFF the mouse
1. You can store or take out the Nano receiver from the
Nano receiver storage by push/pull the Nano receiver.
2. You can switch On or shut off the mouse by use the
ON/OFF switch on the bottom of the mouse.
Mouse Functions
Speed Control
Press the CPI button and you can toggle the CPI between 800
CPI and 1600 CPI.
2 3
Trouble Shooting
1. Check Nano receiver connection; try to insert Nano
Receiver to another USB port on your computer.
2. Check to see if the batteries in the mouse are installed
correctly. Make sure the polarity of the batteries
corresponds with the polarity signs in the battery
compartment.
3. Replace the batteries to make sure the batteries are not
low on power.
P/N: 266-80260-2008
Quick Start Guide
Of
2.4GHz Wireless Super Mini Mouse
4 1
Note:
FCC statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on. The user is encouraged to try to correct
the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
To assure continued compliance, any changes or modifications
not expressly approved by the party responsible for
compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
5
6
Note:
FCC statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on. The user is encouraged to try to correct
the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
To assure continued compliance, any changes or modifications
not expressly approved by the party responsible for
compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
5
6