Rapoo Technology M6126G 2.4GHz Wireless Super Mini Laser Mouse User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	961069
Application ID	ZFMeP9uX2ZGHD8DWIYsUaA==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.23kB (140394 bits)
Date Submitted	2008-06-26 00:00:00
Date Available	2008-06-26 00:00:00
Creation Date	2008-05-29 21:08:34
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2008-06-16 17:15:33
Document Title	Users manual

Trouble Shooting
1.	
Check Nano receiver connection; try to insert Nano
Receiver to another USB port on your computer.
Quick Start Guide
Of
2.	
3.	
Check to see if the batteries in the mouse are installed
correctly. Make sure the polarity of the batteries
corresponds with the polarity signs in the battery
compartment.
Replace the batteries to make sure the batteries are not
low on power.
2.4GHz Wireless Super Mini Mouse
P/N: 266-80260-2008
Installation
1.
2.
Mouse Functions
Plug the Nano receiver into a USB port of your
computer.
Push the Battery Cover Switch aside, open the battery
door and install battery, then close the battery cover.
Speed Control
Receiver storage and ON/OFF the mouse
1.
2.
You can store or take out the Nano receiver from the
Nano receiver storage by push/pull the Nano receiver.
You can switch On or shut off the mouse by use the
ON/OFF switch on the bottom of the mouse.
Press the CPI button and you can toggle the CPI between 800
CPI and 1600 CPI.
Installation
1.
2.
Mouse Functions
Plug the Nano receiver into a USB port of your
computer.
Push the Battery Cover Switch aside, open the battery
door and install battery, then close the battery cover.
Speed Control
Receiver storage and ON/OFF the mouse
1.
2.
You can store or take out the Nano receiver from the
Nano receiver storage by push/pull the Nano receiver.
You can switch On or shut off the mouse by use the
ON/OFF switch on the bottom of the mouse.
Press the CPI button and you can toggle the CPI between 800
CPI and 1600 CPI.
Trouble Shooting
1.
Check Nano receiver connection; try to insert Nano
Receiver to another USB port on your computer.
Quick Start Guide
Of
2.
3.
Check to see if the batteries in the mouse are installed
correctly. Make sure the polarity of the batteries
corresponds with the polarity signs in the battery
compartment.
Replace the batteries to make sure the batteries are not
low on power.
2.4GHz Wireless Super Mini Mouse
P/N: 266-80260-2008
Note:
FCC statement
Connect the equipment into an outlet on a circuit different from
This equipment has been tested and found to comply with the
that to which the receiver is connected.
limits for a Class B digital device, pursuant to Part 15 of the
Consult the dealer or an experienced radio/TV technician for
FCC Rules. These limits are designed to provide reasonable
help.
protection against harmful interference in a residential
To assure continued compliance, any changes or modifications
installation.
not expressly approved by the party responsible for
This equipment generates, uses and can radiate radio
compliance could void the user’s authority to operate this
frequency energy and if not installed and used in accordance
equipment. (Example- use only shielded interface cables when
with the instructions, may cause harmful interference to radio
connecting to computer or peripheral devices).
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on. The user is encouraged to try to correct
the interference by one of the following measures:
Reorient or relocate the receiving antenna.
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
Note:
FCC statement
Connect the equipment into an outlet on a circuit different from
This equipment has been tested and found to comply with the
that to which the receiver is connected.
limits for a Class B digital device, pursuant to Part 15 of the
Consult the dealer or an experienced radio/TV technician for
FCC Rules. These limits are designed to provide reasonable
help.
protection against harmful interference in a residential
To assure continued compliance, any changes or modifications
installation.
not expressly approved by the party responsible for
This equipment generates, uses and can radiate radio
compliance could void the user’s authority to operate this
frequency energy and if not installed and used in accordance
equipment. (Example- use only shielded interface cables when
with the instructions, may cause harmful interference to radio
connecting to computer or peripheral devices).
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on. The user is encouraged to try to correct
the interference by one of the following measures:
Reorient or relocate the receiving antenna.
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2008:05:29 21:08:34+08:00
Modify Date                     : 2008:06:16 17:15:33+08:00
Metadata Date                   : 2008:06:16 17:15:33+08:00
Format                          : application/pdf
Document ID                     : uuid:fade2d79-cdd3-43ae-a811-16698332c114
Instance ID                     : uuid:15cfb0fc-a08b-40ca-9565-f9b13a667e85
Has XFA                         : No
Page Count                      : 6

EXIF Metadata provided by EXIF.tools