Rapoo Technology MK63952WC SLIM FULL SIZE LASER DESKTOP WIRELESS User Manual Inland 7000Kbrdmsman prtsd2 indd
Shenzhen Rapoo Technology Co., Ltd SLIM FULL SIZE LASER DESKTOP WIRELESS Inland 7000Kbrdmsman prtsd2 indd
USERS MANUAL
FCC Information FCC This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications Commission (FCC) rules. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to. CAUTION! The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. TM Inland is a trademark of Inland Products Corporation. Warranty Information 3 Year Limited Warranty IPSG warrants this product to be free of defects in materials or workmanship. This warranty does not include damage resulting from accident or misuse. If this product should become defective, return to your place of purchase. This warranty is in lieu of all other warranties expressed or implied including the implied warranties of merchantability of fitness for a particular purpose, whether arising by law, custom or conduct, and the rights and remedies provided under this warranty are exclusive and in lieu of any other rights or remedies. In no event shall IPSG be liable for consequential damages. Contact us at www.ipsgproducts.com. IPSG, Hilliard, OH, 1-877-743-3549 www.ipsgproducts.com Printed in China Laser Wireless Desktop User Manual User’s Record To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user’s manual. Date of Purchase: Package Contents Your new Laser Wireless Desktop will ship with the following items: • Wireless Desktop • Laser Wireless Mouse • Recharging cradle with USB connector • 2 AAA Ni-MH rechargeable batteries for the mouse • 2 AA Alkaline batteries for keyboard • User’s Manual and Warranty Information Serial Number: System Requirements Please be sure that you meet all of the system requirements below to avoid difficulties during installation. • IBM PCs or 100% compatibles • Windows® ME, 2000, XP • Available USB port System Specifications Your new keyboard and mouse complies with the following specifications: • 1600dpi • USB Interface C. Application Access Keys By default, your computer has a set of preinstalled applications, when your computer is powered on these applications can be accessed using the below set of keys: Access Homepage Press this button to access your default homepage from your default web browser (e.g. Microsoft® Internet Explorer). D. Internet Navigation Keys When your web browser is open (e.g. Microsoft® Internet Explorer), you can use the below set of keys to navigate around the open webpage: Scroll Wheel Scroll this wheel to go up or down on the open page (if applicable). Back Press this button to go back to the previous page (if applicable). Access E-mail Client Press this button to open your default e-mail client (e.g. Microsoft® Outlook). Forward Press this button to proceed to the next page (if applicable). Access Favorites Press this button to access your “Favorites” folder from your default web browser (e.g. Microsoft® Internet Explorer). Search Press this button to open the search panel. Access Media Player Press this button to open your default media player (e.g. Windows® Media Player). Refresh Press this button to refresh the current page. Stop Press this button to stop loading the current page. beginning of the playing track; doubleclick it to go to the previous track. Step Forward Press this button to go to the next track. Stop Press this button to stop the current track. Volume Control Adjust this dial to adjust the volume of your speakers (Left = Volume Down; Right = Volume Up). Mute Press this button to mute the volume on your speakers. B. System Keys Depending on your system’s motherboard configuration, when your system is powered on you can use the below set of keys to control your computer: Power Off Press this button to power off your computer by default.* Standby Press this button to put your computer in Standby mode by default.* Wakeup When your computer is in Standby mode, press this button to wake it up. Installation Note: The pictures shown in the User’s Manual are for demonstration purposes only. Your computer or product may look slightly different. 1. Connect your rechargeable cradle with built-in receiver to your computer a. Turn on your computer and wait for it to load. b. Connect your rechargeable cradle into an available USB port on your computer. c. Your computer will detect your USB device, and the necessary drivers will be installed automatically. 2. Install Batteries into your Mouse a. Remove the battery compartment cover from the bottom of your mouse. b. Install the AAA rechargeable batteries into the battery compartment following the battery orientation guide in the battery bay. c. Replace the battery compartment cover back onto your mouse until it securely locks. d. Your mouse will establish a connection with the receiver. If a connection is not established, proceed to the Establish a Connection section of this manual. My Computer Press this button to access “My Computer”. Calculator Press this button to open Windows® Calculator. * This function can be configured in Windows® Power Management depending on your system’s motherboard configuration. 3. Install Batteries into your Keyboard a. Remove the battery compartment cover from the bottom of your keyboard. b. Install two AA Alkaline batteries into the battery compartment following the battery orientation guide in the battery bay. c. Replace the battery compartment cover back onto your keyboard until it securely locks. d. Your keyboard will establish a connection with the receiver automatically. Your keyboard and mouse are now ready to be used. For more information about your special function keys please see the Special Function Keys Section of the manual. If a connection is not automatically established, proceed to the Establish a Connection section of this manual. 4. Establish a Connection a. To connect your keyboard, press the connect button on the wireless USB receiver, and then press the connect button on the bottom of your keyboard. (NOTE: If a successful connection is not able to be established, please remove the batteries from your keyboard for 10 seconds to clear the memory. Then replace the batteries and attempt to connect the receiver and keyboard again). b. To connect your mouse, press the connect button on the wireless USB receiver, and then press the connect button on the bottom of your mouse. c. There are two LED Indicators on your wireless USB receiver which indicate the status of your keyboard, mouse and computer: LED Indicator Status Description Signal LED (Green) -Solid -Blinking -Blinking slowly Connected/no activity Scanning for a connection Keyboard and/or mouse are inactive Charge LED (Red) -Solid On Charging mouse -Off Battery full/not charging Special Function Keys There are 4 sets of pre-programmed special function keys located on your keyboard, please see the chart indicating each set and a description of each set below: A. Media Navigation Keys When your default media player is turned on and active, you can use the below set of keys to navigate your playlist: Play/Pause Press this button to play (or pause) the current track. Step Backward Press this button to go back to the
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 4 XMP Toolkit : XMP toolkit 2.9-9, framework 1.6 GTS PDFX Conformance : PDF/X-1a:2001 Producer : Acrobat Distiller 7.0.5 for Macintosh Trapped : False GTS PDFX Version : PDF/X-1:2001 Modify Date : 2006:10:18 09:22:41-04:00 Creator Tool : Adobe InDesign CS (3.0) Create Date : 2006:10:18 09:22:41-04:00 Creator : lisa Title : Inland_7000Kbrdmsman_prtsd2.indd Author : lisaEXIF Metadata provided by EXIF.tools