Raspberry Pi RPI21 Credit Card Sized Computer User Manual Raspberry Pi Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	2205297
Application ID	QzQmBwBoM3yKLpsmZtXfFw==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.72kB (608975 bits)
Date Submitted	2014-03-04 00:00:00
Date Available	2014-03-04 00:00:00
Creation Date	2013-12-13 13:43:14
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-12-13 13:43:14
Document Title	Raspberry Pi Quick Start Guide
Document Creator	Adobe InDesign CS6 (Macintosh)
Document Author:	Clive Beale

2b Connect display
If not using HDMI,
plug in your analogue
TV or display
3 Connect input
Plug in a USB keyboard
and mouse
4 Connect network
Connect to your wired
network [optional]
1 Insert SD card
Quick start
See page 3 for how to
prepare the SD card
5 Power up
Plug in the micro USB
power supply
2a Connect display
Plug in your digital TV
or monitor
To set up your Raspberry Pi you will need:
Item
Minimum recommended specification & notes
SD card
•
•
Minimum size 4Gb; class 4 (the class indicates how fast the card is).
We recommend using branded SD cards as they are more reliable.
•
HDMI to HDMI lead (for HD TVs and monitors with HDMI input).
•
HDMI to DVI lead (for monitors with DVI input).
Leads and adapters are available for few pounds -- there is no need to
buy expensive ones!
2a HDMI to HDMI / DVI lead
OR
2b RCA video lead
•
A standard RCA composite video lead to connect to your analogue
display if you are not using the HDMI output.
Keyboard and mouse
•
•
Any standard USB keyboard and mouse should work.
Keyboards or mice that take a lot of power from the USB ports, however,
may need a powered USB hub. This may include some wireless devices.
Ethernet (network) cable
[optional]
•
Networking is optional, although it makes updating and getting new
software for your Raspberry Pi much easier.
Power adapter
•
A good quality, micro USB power supply that can provide at least
700mA at 5V is essential.
Many mobile phone chargers are suitable—check the label on the plug.
If your supply provides less than 5V then your Raspberry Pi may not
work at all, or it may behave erratically. Be wary of very cheap chargers:
some are not what they claim to be.
It does not matter if your supply is rated at more than 700mA.
•
•
•
Audio lead [optional]
•
•
If you are using HDMI to HDMI then you will get digital audio via this.
If you are using the analogue RCA connection or a HDMI to DVI cable,
stereo audio is available from the 3.5mm jack next to the RCA connector.
Know your leads:
HDMI connector
HDMI to DVI lead
RCA composite video connector
Warnings
This product shall only be connected to an external power supply rated at 5V dc, and a minimum current of 500-700mA for
model A and 700-1200mA for model B. Any external power supply used with the Raspberry-Pi shall comply with relevant regulations and standards applicable in the country of intended use.
This product should not be overclocked as this may make certain components very hot.
This product should be operated in a well ventilated environment and the case should not be covered.
This product should be placed on a stable, flat, non-conductive surface in use and should not be contacted by conductive items.
The connection of unapproved devices to the GPIO connector may affect compliance or result in damage to the unit and invalidate the warranty.
All peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to keyboards,
monitors, and mice used in conjunction with the Raspberry Pi.
Where peripherals are connected that do not include the cable or connector, the cable or connector used must offer adequate
insulation and operation in order that the requirements of the relevant performance and safety requirements are met.
Instructions for safe use
Do not expose it to water, moisture or place on a conductive surface whilst in operation.
Do not expose it to heat from any source; the Raspberry Pi is designed for reliable operation at normal ambient room temperatures.
Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
Avoid handling the printed circuit board while it is powered. Only handle by the edges to minimise the risk of electrostatic discharge damage.
The Raspberry Pi is not designed to be powered from a USB port on other connected equipment, if this is attempted it may
malfunction.
Preparing your SD card for the Raspberry Pi
In order to use your Raspberry Pi, you will need to install an Operating System (OS) onto an SD card. An Operating System
is the set of basic programs and utilities that allow your computer to run; examples include Windows on a PC or OSX on a
Mac.
These instructions will guide you through installing a recovery program on your SD card that will allow you to easily install
different OS’s and to recover your card if you break it.
1. Insert an SD card that is 4GB or greater in size into your computer
2. Format the SD card so that the Pi can read it
a. Windows
			 i. Download the SD Association’s Formatting Tool from https://www.sdcard.org/downloads/formatter_4/eula_
		 windows/
			 ii. Install and run the Formatting Tool on your machine
			 iii. Set “FORMAT SIZE ADJUSTMENT” option to “ON” in the “Options” menu iv. Check that the SD card you inserted
		 matches the one selected by the Tool v. Click the “Format” button
b. Mac
			 i. Download the SD Association’s Formatting Tool from https://www.sdcard.org/downloads/formatter_4/eula_
		 mac/
			 ii. Install and run the Formatting Tool on your machine
			 iii. Select “Overwrite Format”
			 iv. Check that the SD card you inserted matches the one selected by the Tool
			 v. Click the “Format” button
c. Linux
			 i. We recommend using gparted (or the command line version parted)
3. Format the entire disk as FAT 3. Download the New Out Of Box Software (NOOBS) from:
downloads.raspberrypi.org/noobs
4. Unzip the downloaded file
a. Windows ­
			 i. Right click on the file and choose “Extract all”
b. Mac ­
			 i. Double tap on the file
c. Linux ­
			 i. Run unzip [downloaded filename]
5. Copy the extracted files onto the SD card that you just formatted
6. Insert the SD card into your Pi and connect the power supply
Your Pi will now boot into NOOBS and should display a list of operating systems that you can choose to install. If your
display remains blank, you should select the correct output mode for your display by pressing one of the following
number keys on your keyboard;
1. HDMI mode -­ this is the default display mode.
2. HDMI safe mode ­- select this mode if you are using the HDMI connector and cannot see anything on screen when
the Pi has booted.
3. Composite PAL mode ­- select either this mode or composite NTSC mode if you are using the composite RCA video
connector
4. Composite NTSC mode
Note: The built­-in Windows formatting tool will only format the first partition that Windows can read ­not the entire disk.
For this reason we advise using the official SD Card Association Formatting Tool.
Compliance Information
The Raspberry Pi complies with the relevant provisions of the RoHS Directive for the European Union. In common with
all Electrical and Electronic Equipment (EEE) the Raspberry Pi should not be disposed of as household waste. Alternative
arrangements may apply in other jurisdictions.
Electromagnetic Compatibility AND OPERATION
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of
the laws of the Member States relating to electromagnetic compatibility.
This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to
the European Standard EN 55022.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
WARNING: Please do not alter or modify the design of this product, doing so may void your ability to use the product freely.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : Raspberry Pi Quick Start Guide
Creator                         : Clive Beale, Raspberry Pi Foundation
Rights                          : CC: BY SA NC
Create Date                     : 2013:12:13 13:43:14Z
Metadata Date                   : 2013:12:13 13:43:14Z
Modify Date                     : 2013:12:13 13:43:14Z
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:7a5d1e67-0aa7-584d-9fba-87309a5b59a8
Original Document ID            : xmp.did:603D4F8CF64CE211AECCCBC92431C440
Document ID                     : xmp.id:A81EF0E00E206811822AC9B55A5E9000
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:A71EF0E00E206811822AC9B55A5E9000
Derived From Document ID        : xmp.did:C84D1EC6DE4EE211BD24A8EBAE531583
Derived From Original Document ID: xmp.did:603D4F8CF64CE211AECCCBC92431C440
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2013:12:13 13:43:14Z
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 4
Author                          : Clive Beale

EXIF Metadata provided by EXIF.tools