Raytek Mi Miniature Infrared Sensor Users Manual MI_MA_54301_ENG_RevF

2015-02-06

• 1 Safety Instructions
• 2 Description
• 3 Technical Data
  • 3.1 Measurement Specifications
  • 3.2 Optical Specifications
  • 3.3 Electrical Specifications
  • 3.4 Environmental Specifications
  • 3.5 Dimensions
  • 3.6 Scope of Delivery
  • 4 Basics
    • 4.1 Measurement of Infrared Temperature
    • 4.2 Emissivity of Target Object
    • 4.3 Ambient Temperature
    • 4.4 Atmospheric Quality
    • 4.5 Electrical Interference
  • 5 Installation
    • 5.1 Positioning
      • 5.1.1 Distance to Object
    • 5.2 Wiring
      • 5.2.1 Sensor Head Cable
      • 5.2.2 Cable for Power Supply and Outputs
    • 5.3 Outputs
      • 5.3.1 Signal Output
      • 5.3.2 Head Ambient Temp. / Alarm Output
      • 5.3.3 Thermocouple Output
    • 5.4 Inputs FTC
      • 5.4.1 Emissivity Setting (analog controlled)
      • 5.4.2 Emissivity Setting (digital controlled)
      • 5.4.3 Ambient Background Temperature Compensation
      • 5.4.4 Trigger and Hold Function
    • 5.5 Connecting to the PC via RS232
    • 5.6 Installing of Multiple Sensors via RS485
  • 6 Operation
    • 6.1 Control Panel
    • 6.2 Setting the Output Jumper
    • 6.3 Setting of Modes
    • 6.4 Post Processing
      • 6.4.1 Averaging
      • 6.4.2 Peak Hold
      • 6.4.3 Valley Hold
      • 6.4.4 Advanced Peak Hold
      • 6.4.5 Advanced Valley Hold
      • 6.4.6 Advanced Peak Hold with Averaging
      • 6.4.7 Advanced Valley Hold with Averaging
    • 6.5 Factory Defaults
  • 7 Options
  • 8 Accessories
    • 8.1 Overview
    • 8.2 Adjustable Mounting Bracket
    • 8.3 Fixed Mounting Bracket
    • 8.4 Air Purging Jacket
    • 8.5 Air Cooling System
    • 8.6 Right Angle Mirror
    • 8.7 Box Lid
    • 8.8 Protective Window
  • 9 Maintenance
    • 9.1 Troubleshooting Minor Problems
    • 9.2 Fail-Safe Operation
    • 9.3 Sensing Head Exchange
  • 10 Software
  • 11 Programming Guide
    • 11.1 Transfer Modes
    • 11.2 General Command Structure
    • 11.3 Device Information
    • 11.4 Device Setup
      • 11.4.1 Temperature Calculation
      • 11.4.2 Emissivity Setting and Alarm Set points
      • 11.4.3 Post Processing
    • 11.5 Dynamic Data
    • 11.6 Device Control
      • 11.6.1 Output for the Target Temperature
      • 11.6.2 Analog Output, Scaling
      • 11.6.3 Alarm Output
      • 11.6.4 Factory default values
      • 11.6.5 Lock Mode
      • 11.6.6 Mode Setting for the Digital Input FTC3
      • 11.6.7 Changing the Sensing Head Calibration Data
      • 11.6.8 Ambient Background Temperature Compensation
    • 11.7 Multiple Units (RS485 Multidrop Mode)
    • 11.8 Command Set
  • 12 Appendix
    • 12.1 Determination of Emissivity
    • 12.2 Typical Emissivity Values
  • Index