Raytrend Technology COLLAGE Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1892032
Application ID	ypATDkeWuQ8CEbi3gtSNzQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.66kB (358252 bits)
Date Submitted	2013-02-01 00:00:00
Date Available	2013-02-01 00:00:00
Creation Date	2017-10-28 13:37:51
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-28 13:37:51
Document Title	Microsoft Word - Collage user manual_121205 _for FCC, NCC, Telec_ - ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	SharonJiang

Owner’s Manual
Collage
IN2UIT
Audio Art：Bluetooth Acoustic Device
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions carefully.
2. Heed all warnings.
3. Install in accordance with the manufacturer's instructions.
4. Only use attachments/accessories specified by the manufacturer.
5. Clean only with a dry cloth.
6. Do not use or place this apparatus near water.
7. Do not install near any heat sources such as radiators, stoves, or other
apparatus (including amplifiers) that radiate heat.
8. Protect the power cord from being trampled on, pinched or twisted at the
plug & tail ends.
9. Unplug this apparatus during lightning storms or when unused for long
periods of time.
10. Refer all servicing to qualified service personnel.
11. Servicing is required when the device has been damaged in any way.
WARNING
 To reduce the risk of fire or electrical shock, do not expose this
equipment to dripping or splashing and ensure that no objects with
liquids, such as vases, are placed near the device.
 Be advised that different operating voltages and power sockets require
matching adaptors and plugs for your particular region.
 Always observe the local safety regulations.
 This device should be installed near the power outlet and disconnection
of the device should be easily accessible.
 To completely power off the device, disconnect the power supply cord
from the AC outlet.
 Do not place the device in a confined space with limited ventilation or
blockage.
 Do not open, disassemble or tamper with the device as there is a
serious risk of electric shock.
SERVICE
 There are no user-serviceable parts.
 All service must be performed by qualified personnel
CAUTION
 Users are advised that any tampering or modifications to the device
that have not expressly stated in this manual could void your warranty
FCC Statement:
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
Federal Communication Commission Interference Statement
authority to operate this equipment.
This equipment has been tested and found to comply with the limits for
This device complies with Part 15 of the FCC Rules. Operation is subject to
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
the following two conditions: (1) This device may not cause harmful
limits are designed to provide reasonable protection against harmful
interference, and (2) this device must accept any interference received,
interference in a residential installation. This equipment generates,
including interference that may cause undesired operation.
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
CONTENTS
INTRODUCTION............................................................................... 1
PACKAGE CONTENTS .................................................................. 1
OVERVIEW ........................................................................................ 2
Front view.................................................................................. 2
Rear panel ................................................................................. 3
PLACING THE SPEAKER .............................................................. 4
Placing on your desktop ....................................................... 4
Mounting your speakers on a wall ..................................... 5
OPERATING...................................................................................... 6
Connecting the AC power..................................................... 6
Control button.......................................................................... 6
Audio input through Bluetooth wireless connection .... 6
Audio input from 3.5mm stereo jack.................................. 7
System status indicator table .............................................. 7
Optimization of audio performance ................................... 8
TROUBLESHOOTING..................................................................... 8
CARE AND MAINTENANCE.......................................................... 9
CONTACTING CUSTOMER SERVICE ...................................... 10
WARRANTY .................................................................................... 10
TECHNICAL SPECIFICATIONS.................................................. 11
APPENDIX ....................................................................................... 11
INTRODUCTION
PACKAGE CONTENTS
Dear Audiophile,
 1 x Collage - Bluetooth speaker device.
 1 x 15V / 4A DC power adaptor
Thank you for purchasing ‘Collage’ by IN2UIT. Collage features hi-end
 1 x stand
tweeters
 8 x rubber base
using
the
proprietary
SBESL
(Self-Biased
ElectroStatic
Loudspeaker) acoustic technology that we refer to as ELECTROSTATZ™.
 2 x screws
The acoustic performance and reproduction are of the highest quality and
 1 x warranty card
level, revitalizing your many familiar sounding recordings into a new listening
experience.
This advanced proprietary technology results from years of intense research
and development. IN2UIT along with our US-based acoustic technology
partner ENIGMAcoustics are one of the very few companies who have
accessed, commercialized and realized this technology for the masses in
designer styling. Each ELECTROSTATZ™ tweeter is constructed in
state-of-the-art facilities using proprietary manufacturing techniques and
equipment, cohering to rigorous standards and manufacturing processes. To
reproduce the ultimate sound quality output from our devices, certain user
requirements have been addressed in this owner’s manual. By conforming to
our tips and suggestions, you will achieve the maximum performance from
the device. We wish you many years of enjoyment through Collage, our
ultra-high performance Bluetooth speaker.
OVERVIEW
Front view
1. Power / Bluetooth pairing button (Right inset picture)
2. Power / Bluetooth LED indicator (Left inset picture)
3. SBESL ELECTROSTATZ™ tweeters (LHS / RHS stereo sound)
Rear panel
1.
3.5mm stereo input jack (Top inset picture)
2.
DC-in socket (Bottom inset picture)
3.
SBESL ELECTROSTATZ™ tweeters
PLACING THE SPEAKER
Placing on your desktop
1. For desktop usage, embedding operation is simple (see the picture inset),
just align the stand protrusion with the rectangle stand receptacle in the
bottom of the unit. Make sure it is seated and engaged properly.
2. There are two screw holes of the bottom of the stand. They should
automatically align the screw holes of the bottom of the unit.
3. Secure the stand to the unit using the screws (x2) provided
4. Stick the rubber base (x8) provided in the groove of the stand.
5. Now you can place the Collage on your desktop. Just make sure placing
the speaker on a firm, level surface. Do not lay the speaker on its back
during playback.
6. For best bass response, the speaker should be placed near a wall.
7. To avoid adverse sound quality, do not place the speaker in confined
areas that are enclosed or block the sound wave dynamics.
Mounting your speakers on a wall
NOTICE: Do not mount the speaker on surfaces that are not sturdy enough,
or have hazards, such as electrical wire or plumbing, concealed behind them.
If you are unsure about installing the speaker, contact a qualified
professional. The brackets were specifically designed to support the weight
of ‘Collage’ only.
1.
Place the wall-mounting bracket of the Collage speaker in the desired
location against the wall and mark the screw locations (x2) with a pencil,
using the bracket as a template. Use a tape measure to measure the
height from the floor to the marked holes and make sure they are level
and equidistant. If you plan to feed wires through the wall, mark the
pilot hole position first.
2.
Choose the screws to fit the hole of the wall-mounting bracket, however
if your wall surface is hard, like concrete, drill pilot holes to insert
anchor plugs for the screws to engage with. Remember always
measure twice
3.
Secure the screws (x2) on the wall.
4.
Mounting operation is simple (see the picture inset), just hanging the
NOTICE: The ELECTROSTATZ™ tweeter panels, LHS & RHS, are dipole
i.e. sound waves travel in both directions. To maintain the highest quality
acoustic performance, never block the rear sound output area and always
maintain at least a 3cm distance between the tweeter panels and the wall.
The mounting bracket will automatically provided the clearance required
wall-mounting bracket of the Collage speaker on the screws. The
speaker now is ready to use.
Audio input through Bluetooth wireless connection
OPERATING
To begin pairing with a Bluetooth device
NOTICE: For safety purposes always turn off the main power switch when
plugging or unplugging in the device.
1. If the device is already turned on, press and hold the power button on the
speaker for two seconds to pair both devices
Connecting the AC power
The universal power adaptor that comes with Collage accepts multiple
voltages (100-240V); however users are advised to check regional AC
voltage supply and plug type before connecting to the power supply. Prior to
connecting to the power supply, make sure the speakers are switched off
first. Engage the male DC-in plug and female DC-in receptacle on the rear of
the device. Turn on the speakers’ power as indicated below.
2. If device power is off, press and hold the power button on the speaker for
two seconds to both turn on and pair the speaker.
3. Enable the Bluetooth function on your music players (Apple, Android,
MP3 etc.) and start the Bluetooth search for the device named as
“IN2UIT Collage”.
4. Choose and confirm the connection to “IN2UIT Collage” from your music
player.
Control button
5. After successful connection, you are ready to play music from your
player. Adjust the required volume on your music player for comfortable
．Press to turn the speaker on and off
．Press to pair Bluetooth device
and non distorted playback. Maximum volume output may cause clipping
on some type of music.
NOTICE: Pairing occurs when the two Bluetooth devices communicate with
each other and establish a connection. A record of information about this
connection is then stored in the memory of each device. Once you pair a
Power On
Action
Pressing
Time
1 ~ 2 seconds
Power On +
Re‐ Pairing
Pairing
(after power is
NOTICE: You may have to enter the password “0000” in order to connect
on )
Bluetooth device.
2 seconds
2 seconds
Power Off
Less than 1
device with the Collage speaker, you should not have to pair it again.
NOTICE: Collage support Bluetooth 2.1 with apt-X , but the device
connected to Collage must support Bluetooth apt-X to enable Bluetooth
second
apt-X.
Audio input from 3.5mm stereo jack
System status indicator table
You can connect an audio devices without Bluetooth™ function, such as a
LED Indication table
portable digital MP3 player, with Collage. This requires using an audio cable
Table 1 status indication
with a 3.5 mm stereo plug to connect with the 3.5mm jack input on the
Collage system. A stereo audio cable with 3.5mm stereo male plugs on both
Status
ends is required (not included in the package).
LEDs
Blue
Orange
1. Make sure the speakers are switched off.
2. Connect the 3.5mm plug to audio source (e.g. MP3 player)
BT Connected
Pairing
Not paired
On
Off
Flash(0.5s)
Flash(0.5s)
On
On
3. Connect the other 3.5mm plug end to Collage
4. Disconnect any Bluetooth connections
Beep indication table
5. Play music from a player connected via the 3.5mm stereo cable.
Status
NOTICE: Using higher quality cables will improve the sound quality and help
Collage speakers realize their full potential.
NOTICE: the device connected to Collage must have volume control.
NOTICE: Automatic Power shutdown. If there is no Bluetooth connection
Tones
High
Mid
or Line-in connection for over 10 minutes, the system shall automatically
shutdown. User needs to power on the system for usage after automatic
shutdown.
Low
Actions
Power
On
Power
Off
Connected
3rd
1st
1st
2nd
2nd
1st
3rd
Low to
high
(triple)
High to
low
(triple)
Disconnected
1st
High (once)
Low (once)
Low battery
1st+2nd
“Du” twice every
20 seconds
Optimization of audio performance
TROUBLESHOOTING
IN2UIT systems feature proprietary, leading edge Electrostatic Loudspeaker
(ESL) technology that we call our ELECTROSTATZ™ tweeter technology.
The ethereal acoustic characteristics provide the user with the highest class
Problem
Action
Speaker will not turn
on (AC power)
• Make sure your system is connected to a working AC
(mains) outlet.
Speaker will not turn
on (battery power)
• Battery may be discharged – connect to working AC
(mains) outlet to restore the battery to operational mode.
Paired Bluetooth
device will not
connect
• Turn the Collage speaker off and back on.
• Remove the Collage speaker from the pairing list on
your Bluetooth device pairing list (consult the device
owner’s manual for assistance). Then pair the device and
the Collage speaker again.
Collage speaker
indicates a
connection, but is not
playing music
• Turn off or disable Bluetooth on all other paired devices
in the vicinity. Reconnect the device you want to listen to.
• Turn the Collage speaker off and back on again.
Cannot pair the
Collage speaker with
my Bluetooth device
• Make sure your Collage speaker is discoverable. Press
and hold the power button (three seconds) until the LEDs
slowly flash.
• Make sure the Bluetooth capability of your Bluetooth
device is turned on.
• Your Bluetooth device may be out of range – try moving
it closer to the Collage speaker.
• Make sure your Bluetooth device supports the transfer
of audio.
• Move your Bluetooth device and/or Collage speaker
away from other devices that generate electromagnetic
interference. Examples are cordless phones, microwave
ovens, wireless network routers, or other Bluetooth
devices.
• If possible, turn off all other nearby Bluetooth devices.
• Turn the Collage speaker off and back on.
• Refer to the owner’s guide, help system, or technical
support for your device to learn how it pairs with other
Bluetooth devices.
of audio playback. In order to maximize this performance, it is advised to
read the following instructions:
1. ELECTROSTATZ™ tweeters are dipole transducers. This means
the sound waves are transmitted from both sides of the diaphragm in
opposite polarity. A dipole transducer produces one sound wave to
the front and another sound wave to the rear.
2. When mounted on the wall brackets, the distance and clearance
from the ELECTROSTATZ™ back plane to the wall is optimal. In
other possible placement criteria, users are advised to keep a
clearance of at least 3cm from any object that may cause blockage
of the front and rear sound waves. A blockage less than 3cm to the
rear of ESL speakers may result in the loss of sound pressure and
less volume output.
3. When correctly positioned, for example, closer to the wall, the
reflected ESL back sound wave can be amplified and help create a
wider, deeper sound stage for more realistic acoustic performance.
The result is life-like music reproduction previously unachieved in the
market place of comparably sized audio systems.
No audio from
Bluetooth device
• Make sure your Bluetooth device is playing audio, and
the volume is up.
• Your Bluetooth device may be out of range – try moving
it closer to the Collage speaker.
• Turn the Collage speaker off and back on again.
CARE AND MAINTENANCE
Components of the highest quality are used in Collage. This assures years
of trouble free operation. The following precautions should still be strictly
adhered to.
Poor sound quality
from
Bluetooth
device
• Your Bluetooth device may be out of range – try moving
it closer to the Collage speaker.
• Move your Bluetooth device and/or Collage speaker
away from any device that generates electromagnetic
interference, such as another Bluetooth device, cordless
phone, microwave oven, or wireless router.
• Reduce the number of applications running on your
Bluetooth device. Running multiple applications can
reduce the amount of internal resources available to
transmit audio. Closing non-essential applications may
improve audio quality.
• Try turning off Wi-Fi to improve audio quality.
• Try un-pairing your Bluetooth device from the Collage
speaker and then re-pairing the two. This action can
possibly clear issues that might have occurred during
initial device pairing.
• Turn the Collage speaker off and back on
Problem
Action
No audio from the
3.5mm jack source
• Make sure your connected device is on and playing.
• Make sure the 3.5 mm plug is fully inserted into the
Collage speaker.
• Increase the volume level on the device.
Poor sound quality
from the 3.5mm jack
source
• Reduce the volume level on the 3.5mm jack source.
• Make sure the 3.5 mm plug is fully inserted into the
Collage speaker
Cleaning
Use a specialized cleaning brush or vacuum cleaner (low setting) with nozzle
attachment to clean speaker cloth and device. If you wish to use a cleaning
agent, apply it onto the cleaning cloth, not directly onto the product. Test a
small area first, as some cleaning products may damage the surfaces and
materials. Avoid products that are abrasive, contain acid, alkali or
anti-bacterial agents.
Recycling used products
This product is subjected to the European Union Waste
Electrical and Electronic Equipment directive (WEEE), 2002/96/EC. This
product must not be disposed of as unsorted municipal waste and must be
collected separately and disposed according to your national regulations.
CONTACTING CUSTOMER SERVICE
WARRANTY
For questions concerning the Collage wireless speaker, contact your local

The warranty only covers faults or defects in material and production.
IN2UIT dealer. To contact IN2UIT directly, consult the contact information
Damage caused as a result of abuse, misuse or tampering is not
included with your Collage speaker or visit www.IN2UIT.com
covered by the warranty.

All warranty claims must be accompanied by a copy of the original filled
out warranty document and certified by your dealer.

Purchasing invoice and warranties are only valid in the country or
market of original origin and distribution. Should warranty service be
required, it must be arranged for in the country of purchase by an
authorized dealer.
10
TECHNICAL SPECIFICATIONS
System
APPENDIX
Two-way active speaker
Bluetooth speaker with apt-X
Frequency Response (+/- 3 dB)
100Hz – 30kHz
Amplifier power
Tweeter: 2.5+2.5W / Woofer:
10W+10W
Tweeter
ELECTROSTATZ™ ESL x 2
Woofer
2 x 2’
Weight (kg)
1.2
Dimensions (W x H x D) ( mm )
530 X 260 X 60
Bluetooth Specification
Version 2.1 + EDR
Supported Bluetooth Profiles
A2DP
Bluetooth operating Range
Up to 10 meters
 Hold down the push button then rotate counterclockwise to open
the plug from the adapter.
 Hold down the push button then rotate clockwise to lock the plug
on the adapter.
11
Collage
Audio Art：Bluetooth Acoustic Device
IN2UIT Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : SharonJiang
Create Date                     : 2013:01:31 15:02:36+08:00
Modify Date                     : 2013:01:31 16:11:37+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:01:31 16:11:37+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Collage user manual_121205 _for FCC, NCC, Telec_ - ok.doc
Creator                         : SharonJiang
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:fe9cd06f-a00d-49f2-9859-1cae3f8852b2
Instance ID                     : uuid:d7c696e0-472d-434f-9914-3af41d545a11
Page Count                      : 16

EXIF Metadata provided by EXIF.tools