Rca Rp5640 Users Manual RP5640_EN(US)

: Rca Rca-Rp5640-Users-Manual-650697 rca-rp5640-users-manual-650697 rca pdf

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

FCC Information

English

FCC Information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
In accordance with FCC requirements, changes
or modifications not expressly approved by
Thomson Inc. could void the user’s authority to
operate this product.
This device generates and uses radio frequency
(RF) energy, and if not installed and used
properly, this equipment may cause interference
to radio and television reception.
If this equipment does cause interference to
radio or television reception (which you can
determine by unplugging the unit), try to correct
the interference by one or more of the following
measures:
• Re-orient the receiving antenna (that is, the
antenna for the radio or television that is
“receiving” the interference).
• Move the unit away from the equipment that
is receiving interference.
• Plug the unit into a different wall outlet so
that the unit and the equipment receiving
interference are on different branch circuits.
If these measures do not eliminate the
interference, please consult your dealer or an
experienced radio/television technician for
additional suggestions. Also, the Federal
Communications Commission has prepared a
helpful booklet, “How To Identify and Resolve
Radio TV Interference Problems.” This booklet
is available from the U.S. Government Printing
Office, Washington, DC 20402. Please specify
stock number 004-000-00345-4 when ordering
copies.
This product complies with DHHS rules 21CFR
subchapter J. appliable at date of manufacture.

This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la class B est
conforme à la norme de NMB-003 du Canada.

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING
FLASH AND ARROWHEAD WITHIN THE
TRIANGLE IS A
WA R N I N G S I G N
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.

CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USERS E RV I C E A B L E PA R T S I N S I D E . R E F E R S E RV I C I N G
TO QUALIFIED SERVICE
PERSONNEL.

THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING
SIGN
ALERTING YOU OF
I M P O R TA N T
INSTRUCTIONS
A C C O M PA N Y I N G
T H E P R O D U C T.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

WARNING: TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.

IMPORTADOR
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
EXPORTER
Thomson Inc.
P.O. Box 1976
Indianapolis, IN 46206 - 1976
©2006 Thomson Inc.
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
www.rca.com
Printed in China / Impreso en China

Safety Information

Important Information

For Your Safety

Technical Information

The AC power plug is polarized
(one blade is wider than the
other) and only fits into AC
power outlets one way. If the
plug will not go into the outlet
completely, turn the plug over
and try to insert it the other
way. If it still does not fit, contact a qualified
electrician to change the outlet, or use a
different one. Do not attempt to bypass this
safety feature.

Product: Clock Radio with CD player
Brand: RCA
Model: RP5640

• Make sure that you keep your set
away from water and high
temperatures.
• Do not use your system immediately
after transporting it from a cold place
to a warm place, as condensation may
cause the system to malfunction.
• Keep your unit away from humid
areas and abnormally hot places.
• To prevent personal injury, do not
reverse any batteries.
• The use of apparatus in moderate
climates.
• The apparatus shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on the
apparatus.
• No naked flame sources, such as
lighted candles, should be placed on
the apparatus.
• Attention should be drawn to the
environmental aspects of battery
disposal.
• Minimum distances (2cm) around the
apparatus for sufficient ventilations.
• The ventilation should not be
impeded by covering the ventilation
opening with items, such as
newspaper, table-cloths, curtains, etc.
• The rating plate is located at the
bottom cabinet of apparatus.

For Your Records
In the event that service should be required, you
may need the model number. In the space
below, record the date and place of purchase:
Date of Purchase:
Place of Purchase:

Service Information

Please refer to the actual unit when
reading the instructions below:

Before You Plug for Power
1. Setting Time Zone

WAKE UP CD TRACK / STATION- sets the
wake up radio station or CD track.
- selects repeat 1 / repeat all / shuffle
/ repeat shuffle in CD mode.
- skips / searches backward.
- starts / pauses CD playback.
- skips / searches forward.
- stops CD playback.
OFF - turns off the radio / alarm / CD
RECALL - recalls available preset radio
stations.
MEMO/SET - sets and stores preset
memory in radio mode.
SNOOZE - turns off the alarm
momentarily.
VOLUME
- decreases volume.
VOLUME
- increases volume.
RADIO ON/BAND - turns on the radio /
changes radio band.

Bottom View
1. 2. 3. 4.
- slide to select different time zone.
DAYLIGHT SAVING TIME - Press and hold for
a few seconds to turn on / off the Daylight
Saving function.
Battery compartment - see “Battery Back-up
Operation”.

Back View
AUDIO-IN - auxiliary audio input jack.
COLOR SELECT - press to toggle among 4
backlight colors.
AUTO DIMMER - turns on / off the auto
dimmer function.

Top View
OPEN / CLOSE - opens / closes the CD
compartment.
WAKE 1 - activates/inactivates WAKE 1
setting, press repeatedly to cycle wake
v

v

v

mode:
WAKE 2 - activates/inactivates WAKE 2
setting, press repeatedly to cycle wake
v

v

v

v

mode:
NAP - sets the alarm to sound after a
specific period of time. (Alarm tone only)

Listening to Auxiliary Source
1. Connect auxiliary input source (e.g. mp3
player) with a line-in cable (included) to
the AUDIO IN jack of the unit.
2. Press AUDIO IN to select auxiliary input
mode with AUDIO-IN shows on the
display.
3. Adjust volume by pressing VOLUME
, control other playback operations
on the auxiliary unit.

IMPORTER
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
Main plug is used as the disconnect device, it shall
remain readily operable and should not be
obstructed during intended used. To be
completely disconnected the apparatus from
supply mains, the main plug of the apparatus
shall be disconnected from the mains socket
outlet completely.

You may slide the time zone selector at
the bottom of the unit to 1) Eastern,
2) Central, 3) Mountain or 4) Pacific. (refer
to the maps on the right)

2. Day Light Saving
You can press and hold for a few seconds
the day light saving switch at the bottom
of the unit to turn on/ off in areas
observing/ not observing such time
change.
WARNING: Please avoid playing with
these buttons after entering the
Clock/Alarm set mode.

Auto Clock Set
You do not have to set the clock time as a
built-in automatic time set system is
equipped in this clock powered by 3V (2
X AA batteries (included). All you have to
do is to plug this clock for power and
current time will be shown automatically.
However, the batteries can also be
exhausted and we recommend that you
replace the batteries every 2-3 years. In
case the memory holding batteries are
accidentally removed, you may set the
clock manually with following procedures:
1. Be sure Time Zone and Daylight Saving
Time is adjusted before operating the
clock.
2. Press SET CLOCK/WAKE repeatedly
until the clock setting icon is
displayed.

3. Press REV or FWD to set the time. Press
and hold the respective buttons
to fast reverse or fast forward clock
time.
4. Clock time will automatically be
saved if no buttons are pressed after
a few seconds. You can also press SET
CLOCK/WAKE once to save your setting
and exit clock set mode.

Listening to Compact Disc

Selecting Play Mode

Waking to CD

1. Press OPEN/CLOSE to open the CD
compartment.
2. Insert a disc, press OPEN/CLOSE to
close the CD compartment door.
3. Press
.
4. Press VOLUME + / - to adjust to your
desired listening level.
5. Press
or
to skip backward or
forward the CD track.
or
to search
6. Press and hold
backward or forward within the CD
track.
7. Press to stop CD playback.

1. Start CD playback.
2. Press
to toggle between different
play modes.

When the waking to CD is selected, /
icon will light.
to turn on the CD.
1. Press
2. Set the wake time.
3. Press WAKE 1 or WAKE 2 to select
waking up by CD, / will light
accordingly.
4. Press VOLUME + / - to adjust to your
desired wake up volume.
5. Press OFF to stop the CD playback.

- repeats the current track.
- repeats the whole disc.
- plays tracks randomly.
- plays random track repeatedly.

Wake Function
Setting the Wake Time

Selecting Wake Mode

1. Press SET CLOCK/WAKE repeatedly
until WAKE 1 or WAKE 2 icon shows on
the display.
2. Press REV or FWD to set the wake
time. The time decrements or
increments will follow by a faster rate
when you press and hold either REV or
FWD.
3. Press SET CLOCK/WAKE repeatedly to
exit setting wake time mode. Or else
the unit will exit setting wake time
mode when no button is pressed
within 5 seconds.

To change to another wake mode (e.g. from
CD to radio), simply press WAKE 1 or WAKE
2 repeatedly to scroll through wake options.

Waking to Alarm Tone
When waking to alarm tone is selected,
/
icon will light.
You cannot adjust the alarm tone with
volume.
• When the AC power is disconnected, the
unit will enter DC backup mode, all wake
mode will be reverted to alarm tone.
• The unit equips with GRAD-U-WAKE
feature, the alarm tone volume will
increase gradually to its maximum in
about 30 to 45 seconds.

Clean the unit with a soft cloth, or a damp
chamois leather. Never use solvents.

Precautions
• Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a
trained technician.
• Warning: Never operate this product with
the cabinet removed.
• The CD player of this unit uses a laser to
read the music on the disc. The laser
mechanism corresponds to the cartridge
and stylus of a record player. Although
this product incorporates a laser pick-up
lens, it is completely safe when operated
according to directions.
• Discs rotate at high speed inside the
player. Do not use damaged, warped or
cracked discs.
• Do not touch the pick-up lens which is
located inside the disc compartment. Also,
to keep dust from collecting on the pickup lens, do not leave the compartment
door open for an extended period of time.

You can select your CD wake up track by
the following procedures.
1. In CD mode, while pressing WAKE UP
CD TRACK / STATION, press REV or
FWD to select your desired CD wake
up track.
2. Release WAKE UP CD TRACK /
STATION, and the CD wake up track is
set.
3. To reset the CD wake up track, follow
the above procedures and set the CD
wake up track to 1.
Note: If the CD compartment is empty,
the alarm tone will sound instead even
the WAKE TO CD mode is selected.

Waking to RADIO
When the waking to radio is selected, /
icon will light.
1. Press RADIO ON/BAND to turn on the
radio.
2. Set the wake time .
3. Press WAKE 1 or WAKE 2 to select
waking up by RADIO / will light
accordingly.

Note: Whenever the unit is in wake up
setting mode and wake up on mode, the
backlight color will changed into red,
regardless of the previously set backlight
color.

Power Failure Indicator
When AC power is interrupted (disconnected)
for a short period of time, both time and
alarm settings will change (unless battery is
installed). After AC power is restored
(reconnected), the Digital Display will blink to
indicate that power was interrupted and you
should readjust the time and alarm settings.

Replace batteries as follow:
1. Remove battery compartment door
(located at the bottom of the radio)
by applying thumb pressure to the
tab on battery door and then lift the
door out and off the cabinet.
2. Replace 2 AA batteries.
3. Replace the compartment door.

EN/E

Using the Weather Band

TV Band

Tuning the Stations

Weather information is given continuously
from U.S. Government Weather Stations
on frequencies from 162.4MHz to
162.55MHz. The Weather transmission,
broadcast 24 hours a day, are taped
messages that are repeated every 4 to 6
minutes and revised and updated as
needed to match the changing weather
conditions. For additional information,
check your location office of the National
Weather Service (Department of
Commerce).
1. Press INSTANT WEATHER to access
Weather Bands with strong signals to
the unit.
2. Press REV or FWD to select among the
7 weather channels.
3. Wx and the corresponding channel
number will show on the display.

CH 2-13 are available for TV Band.

1. Press RADIO ON/BAND (located on
the front of the radio) to turn on the
radio.
2. Press RADIO ON/BAND repeatedly to
select the desired broadcast band.
3. Press REV or FWD to tune to your
desired radio station.
4. Press VOLUME + / - to adjust to your
desired listening level.

4

3
2

1

Canadian Time Zones

IMPORTANT:
The listening range of NOAA weather
stations varies from 10 miles up to a
maximum of 40 miles from the station’s
transmitter. In some areas of the United
States, weather transmissions cannot be
monitored. The effective range of this
radio will have side variations due to the
height of the local transmitting antenna,
atmospheric conditions, and the terrain
between the transmitter and your radio’s
location.

3

2

1

Wake Function
Tip:
If you set the Wake function
with low volume level before
going to bed, we advise using Waking
to Alarm Tone mode to wake you up
since the volume will automatically
increase.

SmartSnoozeTM
This operation allows extra sleep time
after the wake function is on. The alarm
will be off by pressing SNOOZE, SLEEP,
AUDIO-IN, NAP, WAKE 1, WAKE 2,
SET, INSTANT WEATHER or OPEN/
CLOSE until the snooze period is over.
Snooze function can be used repeatedly
up to 30 minutes (default: 9 minutes).
After this, the wake function will turn off
until the next day.
Set the “quiet” period as follow:
While pressing SNOOZE, press REV or
FWD to set the “quiet” period (the
default time is 9 minutes) from 1 minute
to 30 minutes. Release SNOOZE, then the
“quiet” period is set.

1. Silence the alarm momentarily
Press SNOOZE. The alarm will sound again
when the snooze period is over. (see
“SmartSnoozeTM” section).

For catnaps up to 2 hours without
disturbing the regular alarm settings, the
NAP function wakes you up after a short
period of time. Simply:
1. Press NAP, the NAP indicator will flash.
While the NAP indicator is flashing,
press REV or FWD to adjust nap time.
The time range is from 10 minutes to 2
hours at 10 minutes interval (default is
20 minutes).
2. Wait 3 seconds or press NAP again to
confirm, the NAP indicator will show
on the display.
3. Press NAP once to show time left, after
3 seconds, the display will return to
clock time.
Note:
• Only alarm tone can be selected in
NAP mode.
• When the NAP alarm sounds, you can
press OFF to stop it.
• Press and hold NAP for 5 seconds or
select NAP time to 0 minutes to cancel
the NAP function.

3. Disable the alarm permanently
• Press WAKE 1 or WAKE 2 repeatedly
until no corresponding wake indicator
(e.g. / / ) shows on the display.
• To activate the wake function again, press
WAKE 1 or WAKE 2 repeatedly until a
desired wake mode indicator shows on
the display. The previously set wake time
remains unchanged.

1. Press RADIO ON / BAND to access TV
Bands.
2. Press REV or FWD to select among the TV
channels.
3. TV and the corresponding channel
number will show on the display.
TV band: CH 2 - 59.75 MHz, CH 3 - 65.75
MHz, CH 4 - 71.75 MHz, CH 5 - 81.75 MHz, CH
6 - 87.75 MHz, CH 7 - 179.75 MHz, CH 8 185.75 MHz, CH 9 - 191.75 MHz, CH 10 197.75 MHz, CH 11 - 203.75 MHz, CH 12 209.75 MHz, CH 13 - 215.75 MHz

Antennas
FM antenna - The power cord acts as your FM
antenna. It picks up moderate to strong radio
stations and eliminates the need for an
external antenna in most strong signal areas.
Be sure the power cord is stretched to its full
length. Do not coil or bunch the cord
together. Changing position of the power
cord may improve reception.
AM Antenna - A built-in ferrite rod antenna
eliminates the need for an outside antenna
for AM reception. Rotating the unit slightly
may improve reception of distant AM
stations.

NAP & Sleep Function
NAP Mode

2. Stop the alarm
Press OFF and the alarm will be on again the
following day at the same time.

Radio

Setting the Preset Radio
Stations
1. Press RADIO ON/BAND to turn on the
radio.
2. Press RADIO ON/BAND to change the
broadcast band.
3. Press REV or FWD to tune to your
desired radio station.
4. If you want to memorize this radio
station, press MEMO/SET once, and
then press RECALL repeatedly to
choose the radio station number you
want to record in.
5. Press MEMO/SET again to confirm.
6. If you set the radio station in the AL
location, it will be the wake up radio
station of the alarm.

Sleep Mode
In sleep mode, the radio and CD will turn
off automatically. To set the sleep time,
simply:
1. Press SLEEP, then the time display will
exhibit 0:59 and the radio will turn on
(default). While holding SLEEP, press
REV or FWD to set the sleep time. The
time range is from 1 minute to 2 hours
(default is 0:59).
2. Release SLEEP and the current time

will show on the
will be shown again,
display, and the sleep time is set.
• Press SLEEP to read the remaining
sleep time.
Sleep to Radio
1. Under sleep mode, press RADIO ON /
BAND to turn on the radio.
2. Sleep radio station will automatically
switch to the current radio station, you
may select the radio station as usual.
3. Once the sleep time is reached, the radio
will turn off automatically.
You can reset to sleep to a different radio
station, simply:
1. Press RADIO ON/BAND.
2. Press REV or FWD to tune to the radio
station you want to sleep to.
Sleep to CD
1. Under sleep mode, press
to start CD
playback.
2. CD play mode will be automatically in
Repeat All mode when using Sleep to CD
setting.
3. The unit will turn off automatically once
the sleep time is reached.
Note:
• If you decide to turn off the unit sooner,
press SNOOZE or OFF.
• The unit will enter either CD or Radio
mode after SLEEP is pressed, depending
on the previous sleep setting.
• When the sleep mode is activated again,
the sleep time will be the same as the
one you have set before.

Automatic Radio Station
Search
1. Press RADIO ON/BAND (located on the
front of the radio) to turn on the radio.
2. Press and hold REV or FWD for 2
seconds, it will automatically search a
radio station for you.

Selecting the Preset Radio
Stations
1. Press RADIO ON/BAND to turn on the
radio.
2. Press RECALL repeatedly to select your
desired preset radio station.

Overwriting the Preset Radio
Stations
1. Press RADIO ON/BAND to turn on the
radio.
2. Press REV or FWD to tune to your desired
preset radio station.
3. Press MEMO/SET once and then press
RECALL repeatedly to choose the radio
station number you want to overwrite.
4. Press MEMO/SET again to confirm.

Deleting the Preset Radio
Stations
1. Press RECALL repeatedly to select your
preset radio station you want to delete.
2. Press and hold MEMO/SET for 3 seconds
to delete the selected preset radio
station.

Weather band: CH 1 - 162.550 MHz, CH 2
- 162.400 MHz, CH 3 - 162.475 MHz, CH 4 162.425 MHz, CH 5 - 162.450 MHz, CH 6 162.500 MHz, CH 7 - 162.525 MHz

Turning off Wake Function

RP5640

It is important to read this instruction book prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.

US Time Zones

4

You can cancel your wake up radio station by
the following procedures.
1. Press RADIO ON/BAND to turn on the
radio.
2. Press RECALL repeatedly to select the
wake up radio station.
3. Press and hold MEMO/SET to cancel the
wake up radio station.

u s e r
m a n u a l

Power is fed to the unit even
when it is not functioning. To cut
the power supply off, the power cable
must be unplugged.

Radio

You can choose among 4 different backlight
color - blue, green, white and amber.
1. Before a specific color is set, the backlight
color will keep changing.
2. Press Color Select at the back of the unit
to toggle among different backlight color.
3. If the AC power and backup batteries are
removed, the 4 backlight colors will
starting changing again once the AC
power is resumed.

You can select your wake up radio station by
the following procedures.
1. Press RADIO ON/BAND to turn on the
radio and select the band.
2. Press REV or FWD to tune to your desired
radio station.
3. Press and hold WAKE UP CD TRACK /
STATION to store the current radio station
will
as the wake up radio station.
show on the display.
Note: “AL” refers to the Alarm Station. If no
WAKE STATION is set, the wake up radio
station will stay at your last listening radio
station.

This clock radio is equipped with a
memory holding system that can be
powered with 2 “AA” batteries (included
and installed). The power failure
protection circuit will not operate unless
battery is installed. When normal
household power is interrupted, or AC line
cord is unplugged, the batteries will
power the clock radio to keep track of
time and alarm settings programmed into
memory. When the battery backup
functions, the digital display will not light,
however, the function of alarm still occurs
during the power interruption if
remaining battery power is adequate.
Normal operation will resume after AC
power is restored so you will not have to
reset the time or the alarm.

Note:

Clock

Backlight Color Select

4. Press VOLUME + / - to adjust to your
desired wake up volume.
5. Press OFF to turn off the radio.

AC OUTLET POWER SUPPLY:
120V~60Hz

Battery Back-Up Operation
Maintenance

Auto Dimmer
Slide the AUTO DIMMER switch at the back
of the unit to the ON position. The brightness
of the LCD display will vary automatically
according to the environment.
Slide to the OFF position, the display will
remain at its brightest level.

Plugging In For Power

Note: we recommend that you replace the
batteries every 2-3 years.

Display

Wake Function

CD Player

Help protect the environment - we
recommend that you dispose of used
batteries by putting them into specially
designed receptacles.

The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not
as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications
without prior notice. The English version serves as the final reference on all product and operational details
should any discrepancies arise in other languages.

Clock

Front View

Power Supply: 120V ~ 60Hz
Power Consumption: 22 Watts

This product should be serviced only by those
specially trained in appropriate servicing
techniques. For instructions on how to obtain
service, refer to the warranty included in this
Guide.

General Controls
AUDIO-IN - selects auxiliary audio input
mode.
SLEEP - activates SLEEP function.
SET CLOCK / WAKE - sets clock time and
wake setting.
GEFAHR EINES
ELEKTRISCHEN SCHLAGS
REV / FWD - change
time / radio frequency /
CD track
INSTANT WEATHER - recalls available
weather stations.

Electrical Consumption

Ecology

5633 9330 (EN/E)

Before You Begin

Limited Warranty (United
States)
What your warranty covers:
• Defects in materials or workmanship.
For how long after your purchase:
• One year from date of purchase.
The warranty period for rental units begins with
the first rental or 45 days from date of shipment to
the rental firm, whichever comes first.
What we will do:
• Provide you with a new, or at our option, a
refurbished unit. The exchange unit is under
warranty for the remainder of the original
product’s warranty period.
• Proof of purchase in the form of a bill of sale or
receipted invoice which is evidence that the
product is within the warranty period must be
presented to obtain warranty service. For rental
firms, proof of first rental is also required.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc.,
which were originally provided with the product.
We recommend using the original carton and
packing materials.
• Include evidence of purchase date such as the bill
of sale. Also print your name and address and a
description of the defect. Send via standard UPS
or its equivalent to:
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
• Insure your shipment for of loss or damage.
Thomson accepts no liability in case of damage or
loss en route to Thomson.
• Pay any charges billed to you by the Exchange
Center for service not covered by the warranty.
• A new or refurbished unit will be shipped to you
freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual
provides information regarding operating
Instructions and user controls. For additional
information, ask your dealer.)
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or

incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning
damage.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY
WARRANTY APPLICABLE TO THIS PRODUCT. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL
OR WRITTEN INFORMATION GIVEN BY THOMSON
INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A
GUARANTY OR IN ANY WAY INCREASE THE SCOPE
OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. THOMSON INC. SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT OR
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED
WARRANTY ARE GOVERNED BY THE LAWS OF THE
STATE OF INDIANA. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE ON THIS PRODUCT IS
LIMITED TO THE APPLICABLE WARRANTY PERIOD SET
FORTH ABOVE.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation
of incidental or consequential damages, or limitations
on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
• This warranty gives you specific legal rights, and you
also may have other rights that vary from state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for
warranty information.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 5.0.2 for Macintosh
Create Date                     : 2006:04:18 06:11:10Z
Modify Date                     : 2010:04:19 11:38:18-04:00
Metadata Date                   : 2010:04:19 11:38:18-04:00
Creator Tool                    : PageMaker 6.5
Format                          : application/pdf
Creator                         : Joseph
Title                           : RP5640_EN(US)
Document ID                     : uuid:e5697489-f49c-4abd-82a3-4dd045d05080
Instance ID                     : uuid:45d14fd0-e778-404c-a538-3c7b4d21957f
Page Count                      : 1
Author                          : Joseph

EXIF Metadata provided by EXIF.tools