Recon Dynamics PT10A Personal Tracker User Manual

Recon Dynamics, LLC Personal Tracker

User manual

Personal Tracker © 2010 Recon Dynamics 1 PERSONAL TRACKER WARNING: Read and understand all instructions and warnings for this product. In addition, read and follow all instructions and warnings provided. DANGER OF EXPLOSION, INJURY OR FIRE. Carefully follow all instructions and warnings on the battery label and package CAUTION:  Never use a damaged or worn out battery  Discharged batteries should be replaced only with the correct Rechargeable 3.7V lithium polymer battery.  Do not use rechargeable batteries or attempt to charge batteries.  Carefully remove the old. Discharged battery  Do not attempt to open.  Do not peel the label from the battery.  Never dispose of a battery in a fire  Dispose of used batteries in accordance with local regulations.  Recycle batteries  Always insert batteries correctly with regard to polarity (+ and -) as marked on the battery and the equipment.  When installing the battery, do not use excessive force. If the battery does not fit, check to make sure that it matches the polarity markings.  Never expose the battery terminals to any other metal objects. This can short circuit the battery.  Avoid exposure to temperature extremes  When not in use, store the battery in a cool, dark, dry place.  Keep batteries out of the reach of children. REGULATORY STATEMENT This device complies with Part 15 of the FCC rules. Operation subject to the following two conditions:
Personal Tracker 2 © 2010 Recon Dynamics Personal Tracker 1. This device may not cause harmful interference, and 2. The device must accept any interference received, including interference that may cause undesired operation. Changes or modification to this device may void the user’s authority to operate this product. This product is designed for indoor/outdoor use. CAUTION: POTENTIAL EQUIPMENT MALFUNCTION OR FAILURE. Do not touch the electronic components inside the device, except 'the reset button. COMPONENTS Figure 1 PRODUCT FUNCTION RECON Dynamics lets you create that “always know where they are” and set some custom rules for an additional sense of security. You'll be able to define specific parameters for
Personal Tracker Personal Tracker © 2010 Recon Dynamics 3 location boundaries and crucial measurements like motion, temperature, altitude, and flow rate - virtually anything you want to track and monitor. You can rest easy knowing RECON is always keeping an eye out, ready to alert you at a moment's notice. You'll be notified based on your custom parameters and event notification priorities. In addition, if there is a problem, the user has a “panic button” to alert you to a problem.  Supports geo-fencing applications  Built-in telematic sensors - temperature, vibration (motion), barometer (elevation)  Operates up to 1 year between battery charges  Direct sequence spread spectrum (DSSS)  Low data rate, wide bandwidth spreading  Low power, long range  902 – 928 MHz unlicensed spectrum  Highly reliable and secure  Over-determined network topology NOTE: Metal objects blocking radio frequency (RF) transmission can affect the range of the sensor. PREVENTION OF FALSE ALARMS The majority of alarms that occur are false. These situations happen every day due to user error, incorrect installation or improper maintenance of the system. False alarms will limit the responsiveness to the system, and become a general inconvenience. As the number of false alarms increases, authorities have become less likely to respond to alarm systems due to this problem. Many of these situations can be avoided by following some very simple practices.  Ensure all users are properly trained on the operation of the system  Check that motion detectors are not obstructed. Do not allow sources of heat or sound in range of the motion or vibration sensors.  Know how to cancel an alarm or turn off the system before activating.  If a false alarm is tripped notify customer service immediately.  Test the system on a monthly basis to ensure proper functioning  Check cellular signal, power supply, and that all sensors are secured on a daily basis. RECOMMENDED LOCATIONS  Avoid placement near electrical devices that could prevent optimal communication.  Avoid placing near dense metal or thick materials (walls, concrete, etc.) that could affect the signal
Personal Tracker 4 © 2010 Recon Dynamics Personal Tracker Charging the Battery This wireless sensor contains a rechargeable 3.7V lithium polymer battery. The battery will have a lifetime of one year, at which point, barring other mechanical or power source failure, the Monitoring service will be alerted to the batteries pending end of life via the Web UI. TO CHARGE THE BATTERY 1. Locate the charging port on the side of the PT. 2. Plug in the selected charging unit (either wall plug or 12v source*1) Note: If the unit is charging correctly, the LED will be red. 3. Disconnect the charger when the LED turns green, Note: If the unit is functioning correctly, the LED will flash intermittently. The flashing interval may be long enough that you may not see it. Device Registration To activate the device, it must first be assigned to your PT monitoring application. NOTE: The system must be disarmed prior to any changes. 1. Locate the corresponding ID for the PT in the Web GUI. IMPORTANT Write the device description and corresponding device number on the Sensor Location List included with the Portable Alarm System. Keep this sheet for reference. This information will be needed during the monitoring service enrollment process. As device changes are made, be sure to contact customer service to make adjustments to the monitoring service. 2. After registration, test the sensor. If programming through the initial setup, the test function will be included in the setup sequence. Note: If the unit is reset and operating correctly, the LED will intermittently flash. Tamper Faults Faults indicate when there has been a serious issue that needs to be addressed. This could be a number of things including: 1 Refer to the Accessories list at the end of this document.
Personal Tracker Personal Tracker © 2010 Recon Dynamics 5  an unsecured device  low battery  actual tampering or  weak signal If a fault is present, the system will chime and the Fault screen will be displayed. To silence the chime, select SILENCE. To display the fault and resolve immediately, select DISPLAY. Use the up and down arrows to scroll through the faults. Resolve the issue with the action listed in Description of Fault Codes chart. Table 1 DESCRIPTION OF FAULT CODES Fault Code Fault Display Description Action TO REMOVE A TAMPER FAULT 1. To Clear the Fault. a. Open the Personal Tracker Monitoring application in your web browser. b. Select DISPLAY. c. Scroll list of fault(s). d. Locate the correct External ID (label is located on the unit). e. Select CLEAR. f. Select OK. If the unit is reset and operating correctly, the LED will intermittently flash. Accessories The following accessories are available with the Personal Asset Tracker2. Recon Dynamics Wall Charger 12V auto charger Neck Lanyard Belt Clip 2 Images are representative. Actual accessories may vary.
Personal Tracker 6 © 2010 Recon Dynamics Personal Tracker Full One Year Warranty The Personal Tracker is warranted for one year from date of purchase. We will repair, without charge, any defects due to faulty materials or workmanship. For warranty repair information, This warranty does not apply to accessory damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

Navigation menu