Recoton AW9T 900 MHz Transmitter Module User Manual CVL AW9T

Download:
Mirror Download [FCC.gov]
Document ID	264301
Application ID	PaG1tpIJaxKLst4Grhr0Qw==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.31kB (116368 bits)
Date Submitted	2002-08-19 00:00:00
Date Available	2002-08-15 00:00:00
Creation Date	2002-08-14 09:47:42
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2002-08-14 09:49:23
Document Title	CVL-AW9T
Document Creator	Microsoft Word 9.0
Document Author:	Sid Sanders

Modulation LED
Power In
Charger Out
Frequency
2V Input
Power LED
0.5V Input
CLV-AW9T
Operations Instructions
Installation:
Connect the supplied audio cables to the transmitters audio input jacks on the rear panel.
Connect the other end to the sound source. Two inputs are provided to match various devices.
The 1/8" stereo phone jack requires 0.5 volt (RMS) input, and the phone jacks require 2 volt
(RMS) for proper operation.
Connect the power cable to the connector on the rear panel, and plug it into a 115-volt AC wall
socket. For 220 volt applications, contact Recoton customer service.
Operation:
1. Apply power and inputs as indicated above. The red indicator will illuminate.
2. For adjusting the modulation (sound quality), increase the audio level from the source until
the green indicator flashes. This is the best level for sound fidelity. Further increases will
result in distortion. There is an automatic limiter, which will protect the transmitter against
improper emissions.
3. The unit has 3 frequencies, which are user selectable on the rear panel. This allows for multiple transmitter usage or to escape interference from another nearby unit.
4. If "dead spots" are noted, move the transmitter away from walls, computers,
TV sets, etc a few feet.
5. In case of difficulty, contact Recoton Customer service at 1 800 RECOTON.
CLV-AW9T
Operators Manual
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the
device.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
A label on the exterior of the final product must include the FCC ID of this module. A
sample of this would be: The product contains the transmitter FCC ID: CVL-AW9T.
For the Canada manual
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Son fonctionnement est soumis aux deux conditions suivantes: 1) Ce dispositif ne doit
pas causer de parasites nuisibles et; 2) Ce dispositif doit accepter les parasites qu’il reçoit
même ceux pouvant nuire a son fonctionnement

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : Microsoft Word 9.0
Modify Date                     : 2002:08:14 09:49:23-04:00
Author                          : Sid  Sanders
Title                           : CVL-AW9T
Create Date                     : 2002:08:14 09:47:42
Page Count                      : 2
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools