Remeha Avanta Plus Hot Water Cylinder Brochure
2015-05-27
: Remeha-Avanta-Plus Remeha-Avanta-Plus-Hot-Water-Cylinder-Brochure-724381 remeha-avanta-plus-hot-water-cylinder-brochure-724381 remeha-avanta-plus pdf
Open the PDF directly: View PDF 
.
Page Count: 9
| Download | |
| Open PDF In Browser | View PDF |
EVERYONE CAN NOW ENJOY HOT WATER ON TAP. HOT WATER CYLINDERS Unvented Direct, Indirect and Solar 400-2500 litres. 2 3 REMEHA HOT WATER CYLINDERS OVERVIEW INTRODUCTION 60% of the buildings that will be standing in 2050 are already here with us today. So tomorrow, there will be a great need for intelligent heating technology specifically designed for refurbished buildings. This is where Remeha’s advanced thinking is leading the way. To a future where our highly efficient heating systems help to improve the overall energy efficiency of refurbished buildings. Giving them new life and a more sustainable future. Remeha is committed to helping create a more sustainable future with our comprehensive range of energy-efficient, low-carbon heating solutions. Our superior quality, British-manufactured hot water cylinder range offers 24 options of Unvented Direct, Indirect and Solar cylinders with 400l, 500l, 800l, 1000l, 1250l, 2000l and 2500l models available in each of the three categories. A range of optional immersion heater units is also available to provide boost and backup. WHY CHOOSE DUPLEX STAINLESS STEEL? Remeha Commercial cylinders are manufactured from Duplex 2205 stainless steel to EN 1.4462, ASTM S3 2205/S31803 (with PRE value of 35). This Ferritic-Austenitic steel combines high strength, excellent corrosion resistance and stress corrosion cracking resistance as well as excellent pitting resistance. This marine-grade Duplex gives a low thermal expansion and high chloride resistance. It has a great strength-to-weight ratio which allows the finished cylinder to be substantially lower than other materials. 2205 is a high specification grade of Duplex stainless steel, making it highly suitable for commercial water cylinders. 2205 has approximately twice the proof strength of standard 304 and 316 types of stainless steel, meaning it is well equipped to deal with the system pressures involved. The pitting and crevice corrosion resistance in potable water is greater than that of 316 stainless and other leaner alloyed Duplex stainless types often used in water cylinders. End users can therefore be assured of a long trouble-free service life. The Duplex metallurgical structure is carefully balanced to provide dual austenitic and ferritic phases, which provides the high strength level and acts as an effective impediment to stress corrosion and cracking. Remeha Commercial cylinders come with a 6 bar operating pressure as standard. The design options being maximised by this choice. * Depending on incoming cold water temperature and primary flow conditions. Flow rates are crucial to today’s hot water specifiers We have all been in a hotel where the shower does not perform and we have to run around to get wet. Why? Because the hot water system was not designed correctly. Today this all changes with Remeha Commercial, typically massive flow rates in excess of 100 litres/min can be achieved. If you have higher than that coming in, the cylinder will deliver that too. Heat recovery in minutes, not hours REMEHA HOT WATER CYLINDERS OVERVIEW Remeha’s range of Hot Water Cylinders meets all British environmental legislation and regulation standards as well as EU Directives. This includes the recommendations of HSE Document L8 relating to Legionella Pneumophilia, with the cylinders containing a minimum of two inspection ports (three on larger models) and three optional destratification loop kits to circulate the hot water and enable pasteurisation. CODES OF PRACTICE/LEGISLATION EU Directives Pressure Equipment Directive 97/23/EC. Low Voltage Directive (LVD) 2006/95/EC. Components supplied comply with the following standards: BS EN 1490 Building Valves – Combined Temperature and Pressure Relief Valves. BS EN 1491 Building Valves – Expansion Valves. Remeha Commercial cylinders are designed in such a way that if provided with the prescribed heat input, the units will recover from cold in less than 60* minutes. This is done by the inclusion of super high performance coils or commercial electrical elements. Electromagnetic Compatibility (EMC) Directive 2004/1 08/EC. Remeha Hot Water Cylinders are approved and certified by a third party for safety and performance and manufactured in the UK. Water Supply (Water Fittings) Regulations (England and Wales). BS EN 60730-2-8 Automatic Electrical Controls – Particular Requirements for Electrically Operated Water Valves. The Water Byelaws 2004 Scotland. BS EN 13959 Anti-pollution Check Valves. Water Supply (Water Fittings) Regulations (Northern Ireland). The use of these water heaters will aid in compliance with: Health and Safety Executive Approved Code of Practice L8: The control of legionella bacteria in water systems. Ecodesign Requirements for Energy Related Products (ERP) Directive 2009/125/EC. Legislation Building Regulations Part G and Part L (England and Wales). Scottish Building Standards Section 4 and Section 6. Building Regulations (Northern Ireland) Parts F1 and F2 and Part P. Standards Relevant clauses of the following standards are complied with: EN 12897, EN 60335-2-21. The stainless steel materials used comply with the relevant clauses of: EN 10088. BS 6144 Specification for Expansion Vessels Using An Internal Diaphragm For Unvented Water Supply Systems. BS EN 1567 Building Valves – Water Pressure Reducing Valves and Combination Reducing Valves. BS EN 60730-2-9 Automatic Electrical Controls – Particular Requirements for Temperature Sensing Controls. BS EN 806 Parts 1 to 5: Specification for installations inside buildings conveying water for human consumption. BS 8558 Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings. Chartered Institute of Building Services Engineers Guide B and Guide F. Manufactured in a factory approved to: BS EN ISO 9001 · OHSAS 18001 · ISO 14001 LEGIONELLA PNEUMOPHILIA – MEETING RECOMMENDATIONS OF HSE DOCUMENT L8 • It is the responsibility of us all to consider the safety of others when designing and installing hot water systems. Advice on doing so is contained in HSE document L8, this advice is heavily detailed and precise • Essentially, it is recommended that any cylinder should have access for inspection and cleaning, a system of pasteurisation and where possible dead legs in the system are designed out • R emeha Commercial provides features which meet these needs. • A minimum of two inspection ports (three on larger models) • T hree optional destratification loop kits (shunt pumps) are available to circulate the hot water from top to bottom to enable pasteurisation Temperature vs state of legionella bacteria: 20°C and below Legionella bacteria are dormant 20°C to 45°C Legionella bacteria multiply 55°C Legionella bacteria die in five to six hours 60°C Legionella bacteria die in 32 minutes 66°C Legionella bacteria die in two minutes Above 70°C Disinfection taking place Some large cylinders have high heat losses, substantially increasing fuel costs and pollution. All this ends with the Remeha Commercial range. • The Remeha Commercial range of cylinders are insulated with 100mm of polyurethane foam of initial K-value 0.024 W/m.k, flammability to BS 4735 • The foam is applied to all surfaces of the cylinder including around the legs and the lifting lugs at the top Remeha Commercial cylinders are fully approved and certified. Typically calorifiers are made to British and European manufacturing standards. These units are generally bespoke and essentially one-off, the performance is not tested or qualified by any third party. Claims made for performance will be based on calculations rather than testing. That is not the case with Remeha Commercial cylinders. The range has been tested by Kiwa and Nemko for safety and performance. They are built entirely in a purpose‑designed manufacturing facility in the UK. 4 5 REMEHA HOT WATER CYLINDERS OVERVIEW REMEHA HOT WATER CYLINDERS INDIRECT REMEHA COMMERCIAL HOT WATER CYLINDERS MODEL RANGE REMEHA COMMERCIAL INDIRECT Remeha Commercial cylinders offer a range of indirect cylinders. 24 models in the range: A B 00, 500, 800, 1000, 1250, 2000, 4 2500 in Direct, Indirect and Solar Each unit is equipped with a high performance coil which is designed to heat the cylinder from cold, in less than 60* minutes. No more do you have to turn the hot water system on the day before you use it. Optional immersion heater units are available to provide boost and backup. 35° All units are30° delivered with a full unvented hot water kit 40° 45° which comprises: n 4 00 Litre Ø872 x H1500 n 5 00 Litre Ø872 x H1800 n 8 00 Litre Ø1024 x H1906 Expansion vessel and support (WRAS approved, CE marked in accordance with Directive PED/97/23/CE to BS6144/1980). n 1000 Litre Pressure reducing valve to BS EN 1567 (WRAS approved, DVGW certified). Ø1024 x H2301 Single check valve to BS 6282 Part 1 1981 B Expansion relief valve to BS 6283 Part 1 1991 Isolating ball valve to BS 5174 A n Isolating drain valve Tundish 35° 40° 30° Temperature and pressure relief valve 45° Commercial isolation zone valve INDIRECT n 1250 Litre Ø1224 x H1937 n 1450 Litre Ø1224 x H2253 n 2 000 Litre Ø1476 x H2011 n 2500 Litre Ø1476 x H2416 Nominal capacity (litre) 400 500 800 1000 1250 1450 2000 2500 A (mm) 1500 1800 1906 2301 1937 2253 2011 2416 B (mm) 872 872 1024 1024 1224 1224 1476 1476 Material Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Operating pressure (6 bar) Yes Yes Yes Yes Yes Yes Yes Yes Insulation 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU Outlet 1" 1" 2" 2" 2" 2" 2" 2" Inlet 1" 1" 1½" 1½" 1½" 1½" 2" 2" Coil 1" 1" 1¼" 1¼" 1½" 1½" 1½" 1½" Tappings ½" ½" ½" ½" ½" ½" ½" ½" Secondary return 1" 1" 1" 1" 1" 1" 1" 1" Inspection port (mm) 115 115 115 115 115 115 115 115 Coil – area/rating @ 30 l/min 2m2 /43.6kW 2m2 /41.8kW 3m2 /52.7kW 3m2 /51.4kW 5m2 /63.6kW 5m2 /61.2kW 7.5m2 /98.4kW 7.5m2 /86.4kW Element (kW) (Max) 24 24 45 45 54 54 54 54 Empty weight (kg) 105 110 164 188 319 322 445 450 Full weight (kg) 505 610 964 1188 1569 1872 2445 2950 * Depending on incoming cold water temperature and primary flow conditions. 6 7 REMEHA HOT WATER CYLINDERS DIRECT REMEHA COMMERCIAL DIRECT REMEHA HOT WATER CYLINDERS SOLAR REMEHA COMMERCIAL SOLAR A Progressively we are being educated to consider the environment when making choices which have an environmental impact. Renewable energy sources should be considered not only for their reduction in one’s carbon footprint but also as they make fiscal good sense. Depending on the choice of elements the cylinder is capable of heating from cold in less than 60 minutes. B B Remeha Commercial cylinders offer a range of direct cylinders which when combined with our range of electrical elements can give the specifier multiple options of generating hot water. Built in to the units are highly efficient coil heat exchangers which maximise the efficiency of your solar collectors. A All units are delivered with a full unvented hot water kit which comprises: Expansion vessel and support (WRAS 35° approved, 30° CE marked in accordance with Directive PED/97/23/CE to BS6144/1980). Alternatively you can use a standard indirect unit to provide a solar 30° 35° preheat system. 40° 45° 45° Pressure reducing valve to BS EN 1567 (WRAS approved, DVGW certified). Single check valve to BS 6282 Part 1 1981 All units are delivered with a full unvented hot water kit which comprises: Expansion relief valve to BS 6283 Part 1 1991 Expansion vessel and support (WRAS approved, CE marked in accordance with Directive PED/97/23/CE to BS6144/1980). Isolating drain valve Pressure reducing valve to BS EN 1567 (WRAS approved, DVGW certified). Tundish Single check valve to BS 6282 Part 1 1981 B B Isolating ball valve to BS5174 Temperature and pressure relief valve Expansion relief valve to BS 6283 Part 1 1991 A 35° Remeha Commercial solar cylinders can be used to store the energy gained from the sun and deliver it to your hot water system. Isolating ball valve to BS5174 30° 45° 35° 40° DIRECT Isolating drain valve 30° Tundish 45° Temperature and pressure relief valve Nominal capacity (litre) 400 500 800 1000 1250 1450 2000 2500 A (mm) 1500 1800 1906 2301 1937 2253 2011 2416 B (mm) 872 872 1024 1024 1224 1224 1476 1476 Material Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Operating pressure (6 bar) Yes Yes Yes Yes Yes Yes Yes Yes Nominal capacity (litre) 400 500 800 1000 1250 1450 2000 2500 Insulation 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU A (mm) 1500 1800 1906 2301 1937 2253 2011 2416 Outlet 1" 1" 2" 2" 2" 2" 2" 2" B (mm) 872 872 1024 1024 1224 1224 1476 1476 Inlet 1" 1" 1½" 1½" 1½" 1½" 2" 2" Material Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Duplex 2205 Secondary return 1" 1" 1" 1" 1" 1" 1" 1" Operating pressure (6 bar) Yes Yes Yes Yes Yes Yes Yes Yes Inspection port (mm) 115 115 115 115 115 115 115 115 Insulation 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU 100mmPU Element (kW) (Max) 24 24 63 81 84 90 90 90 Outlet 1" 1" 2" 2" 2" 2" 2" 2" Empty weight (kg) 95 100 153 178 297 304 415 421 Inlet 1" 1" 1½" 1½" 1½" 1½" 2" 2" Full weight (kg) 495 600 953 1178 1547 1754 2415 2921 Coil 1" 1" 1¼" 1¼" 1½" 1½" 1½" 1½" Solar Coil 1" 1" 1¼" 1¼" 1½" 1½" 1½" 1½" Secondary return 1" 1" 1" 1" 1" 1" 1" 1" Inspection port (mm) 115 115 115 115 115 115 115 115 Element (kW) (Max) 24 24 45 45 54 54 54 54 Empty weight (kg) 105 110 164 188 319 322 445 450 Full weight (kg) 505 610 964 1188 1569 1872 2445 2950 Range of optional elements Single Phase Elements n 6kW immersion heater n 9kW immersion heater Bespoke Three Phase Elements n 12kW immersion heater n 18kW immersion heater n 24kW immersion heater n 3 0kW immersion heater NOTE: Please refer to the fitting instructions when considering high output immersion heaters. Each cylinder has a maximum input which must not be exceeded for safety reasons. n 3 6kW immersion heater n 4 5kW immersion heater n 5 4kW immersion heater Commercial isolation zone valve SOLAR 8 9 REMEHA HOT WATER CYLINDERS TECHNICAL DATA REMEHA HOT WATER CYLINDERS TECHNICAL DATA 2500 Direct 2000 Direct 1450 Direct 1250 Direct 1000 Direct 800 Direct 400 Direct 2500 Indirect 2000 Indirect 1450 Indirect 1250 Indirect 1000 Indirect 800 Indirect 500 Indirect 400 Indirect 500 Direct DIRECT INDIRECT Max direct kW rating 24 24 45 45 54 54 54 54 Max direct kW rating 24 24 63 81 84 90 90 90 Direct heat time (based on max kW rating in mins) 52 66 56 70 73 84 117 146 Direct heat time (based on max kW rating in mins) 52 66 40 39 47 51 70 87 Heat loss (kWh in 24h) 1.72 2.14 2.74 3.33 3.60 4.17 4.30 4.50 28.7 31.3 32.9 35.0 30.1 40.2 37.5 Hot water capacity (volume of water drawn off >40°C) 384 482 776 961 1206 1399 1930 2482 2 Coil surface area m2 15 l/min Coil rating (kW) Indirect heat time (mins) 29.4 Heat loss (kWh in 24h) 5 7.5 30 l/min 43.6 41.8 52.7 51.4 63.6 61.2 98.4 86.4 Weight full (kg) 495 600 953 1178 1547 1754 2415 2921 60 l/min 59.7 55.8 76.9 76.5 97.9 91.7 132.2 126.4 Weight empty (kg) 95 100 153 178 297 304 415 421 15 l/min 43 55 80 91 112 130 180 225 Max supply pressure 1.6 MPa (16 bar) 30 l/min 29 38 48 59 62 72 99 124 Max design pressure 0.8 MPa (8 bar) 60 l/min 21 28 32 39 40 50 48 62 Max operating pressure 0.6 MPa (6 bar) Max expansion vessel charge pressure 1.0 MPa (10 bar) 15 l/min Pressure drop through primary coil (Mpa) 3 0.002 0.001 30 l/min 0.004 0.008 0.006 0.007 Expansion relief valve setting 60 l/min 0.032 0.044 0.025 0.03 T&P valve setting 1.72 2.14 2.74 3.33 3.60 4.17 4.30 4.50 Hot water capacity (volume of water drawn off >40°C) 384 482 776 961 1206 1399 1930 2482 Weight full (kg) 505 610 964 1188 1569 1872 2445 2950 Weight empty (kg) 105 110 164 188 319 322 445 450 Max supply pressure 1.6 MPa (16 bar) 1.6 MPa (16 bar) Max design pressure 0.8 MPa (8 bar) 0.8 MPa (8 bar) Max operating pressure 0.6 MPa (6 bar) 0.6 MPa (6 bar) Max expansion vessel charge pressure 1.0 MPa (10 bar) 1.0 MPa (10 bar) Expansion relief valve setting 0.8 MPa (8 bar) 0.8 MPa (8 bar) T&P valve setting 1 MPa (10 bar), 90-95°C 1 MPa (10 bar), 90-95°C Maximum primary pressure (indirect only) 0.3 MPa (3 bar) NOTES: 1. Indirect cylinders tested in conformance with BS EN 12897:2006. 2. Heat up time from cold through 45°C, based on a flow temperature of 80°C +/- 2°C and normal volume. 0.8 MPa (8 bar) 1 MPa (10 bar), 90-95°C 10 11 REMEHA HOT WATER CYLINDERS TECHNICAL DATA 7.5 2.5 5 Solar coil heat time (mins) 29.4 28.7 31.3 32.9 35.0 30.1 40.2 37.5 43.6 41.8 52.7 51.4 63.6 61.2 98.4 86.4 DY1216 DY1816 DY2416 DY3027 DY3627 DY4527 DY5436 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 1250 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 1450 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Upper ✓ ✓ ✓ ✓ Upper ✓ ✓ Upper ✓ ✓ ✓ ✓ Lower DY0916 ✓ ✓ ✓ ✓ Lower DY0616 Lower Element ✓ ✓ ✓ 60 l/min 59.7 55.8 76.9 76.5 97.9 91.7 132.2 126.4 15 l/min 28.4 27.2 30.5 33.2 48.6 46.4 97.9 91.7 15 l/min 43 55 80 91 112 130 180 225 2000 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 2500 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 30 l/min 29 38 48 59 62 72 99 124 60 l/min 21 28 32 39 40 50 48 62 15 l/min Pressure drop through primary coil (Mpa) 800 1000 400 500 0.002 0.001 30 l/min 0.004 0.008 0.006 0.007 60 l/min 0.032 0.044 0.025 0.03 Heat loss (kWh in 24h) 1.72 2.14 2.74 3.33 3.60 4.17 4.30 4.50 Hot water capacity (volume of water drawn off >40°C) 384 482 776 961 1206 1399 1930 2482 400 ✓ ✓ ✓ ✓ ✓ 500 ✓ ✓ ✓ ✓ ✓ 800 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 1000 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 1250 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 1450 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 2500 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ NOTES: 1. Cylinders tested in conformance with BS EN 12897:2006. 2. Heat up time from cold through 45°C, based on a flow temperature of 80°C +/- 2°C and normal volume. 45 54 400 ✓ ✓ ✓ ✓ ✓ 500 ✓ ✓ ✓ ✓ ✓ 800 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 1000 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Upper 36 Lower 30 Upper 24 Lower 18 Upper 12 Lower 9 Upper 6 Lower kw Upper 0.3 MPa (3 bar) Solar Maximum primary pressure 1 MPa (10 bar), 90-95°C Location T&P valve setting Lower 0.8 MPa (8 bar) Upper Expansion relief valve setting Lower 1.0 MPa (10 bar) Upper 0.6 MPa (6 bar) Max expansion vessel charge pressure Lower 0.8 MPa (8 bar) Max operating pressure Upper Max design pressure Lower 1.6 MPa (16 bar) Upper Max supply pressure DY5436 2000 450 DY4527 2950 445 DY3627 2445 322 DY3027 1872 319 DY2416 1569 188 DY1816 1188 164 DY1216 964 110 DY0916 610 105 DY0616 505 Weight empty (kg) Element Weight full (kg) 1250 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 1450 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 2000 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 2500 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ IMPORTANT NOTE: 400 and 500 ltr calorifiers are only allowed a maximum of 24kW when fitting elements. Lower Auxiliary coil rating (kW) 15 l/min 30 l/min Indirect Solar coil rating (kW) Lower 5 1.5 Upper 3 1 Lower 2 Auxiliary coil surface area m2 Upper Coil surface area m2 54 Lower 54 146 45 Upper 54 117 36 Lower 54 84 30 Upper 54 73 24 Lower 45 70 18 Upper 45 56 12 Lower 24 66 9 Upper 24 52 6 Direct Max direct kW rating Direct heat time (based on max kW rating in mins) kw Location 2500 Solar 2000 Solar 1450 Solar 1250 Solar 1000 Solar 800 Solar 500 Solar ELEMENT ALLOCATION TABLE 400 Solar SOLAR REMEHA HOT WATER CYLINDERS TECHNICAL DATA 12 13 REMEHA HOT WATER CYLINDERS ORDERING GUIDE REMEHA HOT WATER CYLINDERS ORDERING GUIDE 6 Please note cylinders and unvented kit cannot be supplied separately Unit Kit 1 Sensor pockets 2 Temperature and pressure Direct Remeha Commercial 400 litre 94:050:399 90:002:867 Remeha Commercial 500 litre 94:050:400 90:002:867 Remeha Commercial 800 litre 94:050:401 90:002:493 Remeha Commercial 1000 litre 94:050:402 90:002:494 Remeha Commercial 1250 litre 94:050:403 90:002:495 Remeha Commercial 1450 litre 94:050:404 90:002:805 Remeha Commercial 2000 litre 94:050:405 90:002:496 Remeha Commercial 2500 litre 94:050:406 90:002:496 Remeha Commercial 400 litre 94:050:407 90:002:885 Remeha Commercial 500 litre 94:050:408 90:002:885 relief valve boss 3 Secondary return 4 Immersion heater/ inspection hatches 5 Cold inlet Indirect Remeha Commercial 800 litre 94:050:409 90:002:540 Remeha Commercial 1000 litre 94:050:410 90:002:541 Remeha Commercial 1250 litre 94:050:411 90:002:542 Remeha Commercial 1450 litre 94:050:412 90:002:800 Remeha Commercial 2000 litre 94:050:413 90:002:543 Remeha Commercial 2500 litre 94:050:414 90:002:543 Remeha Commercial 400 litre 94:050:415 90:002:924 Remeha Commercial 500 litre 94:050:416 90:002:924 2 1 3 Solar Indirect Remeha Commercial 800 litre 94:050:417 90:002:913 Remeha Commercial 1000 litre 94:050:418 90:002:914 Remeha Commercial 1250 litre 94:050:419 90:002:915 Remeha Commercial 1450 litre 94:050:420 90:002:916 Remeha Commercial 2000 litre 94:050:421 90:002:917 Remeha Commercial 2500 litre 94:050:422 90:002:917 Remeha Commercial Accessories 4 Bespoke Three Phase Elements Destratification loop kit – 400-500 litre 95:970:140 12kW immersion heater DY1216 Destratification loop kit – 800-1450 litre 95:970:157 18kW immersion heater DY1816 Destratification loop kit – 2000-2500 litre 95:970:158 24kW immersion heater DY2416 Temperature gauge 95:970:141 30kW immersion heater DY3027 Pressure gauge 95:970:142 36kW immersion heater DY3627 45kW immersion heater DY4527 54kW immersion heater DY5436 Single Phase Elements 6kW immersion heater DY0616 9kW immersion heater DY0916 Bus bar conversion kits (single >3ph) HR94970110 4 5 NOTE: Please refer to the fitting instructions when considering high output immersion heaters. Each cylinder has a maximum input which must not be exceeded for safety reasons. Illustration does not represent all models or connection positions. 6 Hot water outlet 14 15 REMEHA HOT WATER CYLINDERS WARRANTY WARRANTY NOTES Remeha Commercial guarantees the water heater cylinder against faulty manufacture or materials for a period of two years from the date of purchase including parts and labour. This two year guarantee is extended to five years for the cold water control valve and to 25 years (from the date of installation) for the stainless steel inner vessel. These guarantees are valid provided that: • The water heater has been installed by a competent engineer and as per the instructions contained in the installation manual and all relevant Codes of Practice and Regulations in force at the time of installation • Any disinfection has been carried out in accordance with BS 6700 • Should the factory fitted temperature and pressure relief valve be tampered with or removed your guarantee will be invalidated • The water heater has not been modified in anyway other than by Remeha approved engineers • The water heater has only been used for the storage of wholesome sanitary water (max 250mg/l chloride) NOTES PAGE • The water heater has not been subjected to excessive pressure beyond the guidelines detailed in the installation instructions • The water heater has not been subjected to frost, nor has it been tampered with or been subject to misuse or neglect • No factory fitted parts have been removed for unauthorised repair or replacement • Regular maintenance has been carried out by a competent person in accordance with the requirements set in the maintenance section of the installation manual and any replacement parts used should be approved spare parts • The guarantee is not valid outside of the United Kingdom • Only stainless steel dummy plugs are to be used The warranty does NOT cover: Consequential damages or profit loss which may arise from a defect. Warranty claims have no delaying effect on the payment dates and other demands. Your Remeha warranty covers you for an equivalent replacement and labour in the event that the unit fails prematurely as a result of a proved manufacturing defect. In order that this can be achieved, full access for removal and replacement of the unit is essential. If it is found that access can not be achieved the warranty will be limited to the replacement of the unit only and subsequent labour charges would not be met under the warranty. BlueEfficiency CLEANER / GREENER / SMARTER BlueEfficiency BlueEfficiency TreadLightly BlueEfficiency TreadLightly CLEANER / GREENER / SMARTER CLEANER / GREENER / SMARTER CLEANER / GREENER / SMARTER ON THE PLANET ON THE PLANET Remeha Commercial Innovation House 3 Oaklands Business Centre Oaklands Park Wokingham RG41 2FD T: 0118 978 3434 boilers@remeha.co.uk www.remeha.co.uk The data published in this brochure is based on the latest information (at date of publication) and may be subject to revisions. We reserve the right to continuous development in both design and manufacture, therefore any changes to the technology or equipment employed may not be retrospective, nor may we be obliged to adjust earlier supplies accordingly. Version 2, March 2015 ©Remeha 2015
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2015:03:19 10:44:44Z Creator : Adobe InDesign CC 2014 (Macintosh) Modify Date : 2015:04:21 14:40:39+01:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:04:21 14:40:39+01:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:0b1d9a40-f6f7-4f56-b848-d40e08032bbd Original Document ID : xmp.did:a3ac2bc1-f75c-46b1-b32f-656e2219ddcd Document ID : xmp.id:f0a7ad25-0160-4ff3-975a-dcb3e343fd5b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:53c53b32-e96d-447e-9724-2dbe2919c6db Derived From Document ID : xmp.did:173ae750-2bb6-464d-96c2-c36f2ce8df34 Derived From Original Document ID: xmp.did:a3ac2bc1-f75c-46b1-b32f-656e2219ddcd Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2015:03:19 10:44:44Z Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 9EXIF Metadata provided by EXIF.tools