Remotesolution MC85A00 Zigbee Module User Manual Users manual 2
Remote Solution Co., Ltd. Zigbee Module Users manual 2
Users manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3664987 |
| Application ID | oqLda1gfYEub3XcN8XHiEg== |
| Document Description | Users manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 31.48kB (393554 bits) |
| Date Submitted | 2017-12-06 00:00:00 |
| Date Available | 2018-06-04 00:00:00 |
| Creation Date | 2017-12-06 16:00:13 |
| Producing Software | Adobe PDF Library 10.0 |
| Document Lastmod | 2017-12-06 17:26:00 |
| Document Title | PowerPoint í”„ë ˆì í…Œì´ì…˜ |
| Document Creator | PowerPointìš© Acrobat PDFMaker 9.0 |
| Document Author: | Sean.Kim |
Zigbee Module(MC85A00) Manual 1. Introduction : Zigbee Module(MC85A00) is data transfer module, using in measuring instrument. Measuring intstrument contains Natural conditions such as temperature and humidity 2. Features This module receives the command of the main module from the measuring equipment and sends the measured data to the monitoring device or transmits the data received from the monitoring device to the main module. This module is a device that enables measurement equipment to communicate wirelessly (ZIGBEE), and interacts with the main module via UART. It also has a built-in 2.4-MHz amplifier, which helps to transfer data over longer distances. 3. Operation sequence First, monitoring device request measured data to measuring instrument using ZIGBEE. Second, zigbee module(MC85A00) request measured data to main module using UART. Third, main module send measured data to zigbee module(MC85A00) using UART. Forth, zigbee module(MC85A00) send measured data to monitoring device using ZIGBEE. Measuring instrument MC85A00 Monitoring Device (Zigbee Module) Main Module < 1 페이지 > Zigbee Module(MC85A00) Manual 4. Hardware information : All control of the Zigbee module is done in CC2630 (TI). CC2592 (TI) is used to increase the communication distance. Between the main module and this module are connected through a pin header and a pin header socket(24pin), each of which has its own function. (See the figure below) Pin Configuration (Top View) Pin No. Pin Name Pin No. Pin Name MCU Reset DIO[29] UART Tx 11 13 15 17 19 21 23 DIO[23] LID DIO[24] Relay DIO[28] UART Rx DIO[30] UART CLK DIO[02] DPSW1 DIO[17] SPI SCLK DIO[04] DPSW3 12 DIO[18] SPI MISO DIO[03] DPSW2 10 DIO[08] LED1 14 DIO[09] LED2 16 DIO[19] SPI MOSI DIO[14] SPI CSN DIO[05] I2C SDA DIO[10] LED3 18 DIO[06] I2C SCL VDD 3V3 22 GND DIO[11] LED4 20 GND 24 < 2 페이지 > DIO[25] MRESET GND Zigbee Module(MC85A00) Manual 5. Electrical Characteristics - Absolute Maximum Supply Voltage(DC) : -0.3V ~ 4.1V - Absolute Maximum Storage Temperature Range : -40˚C ~ 150˚C - Recommended Operating Voltage : 3.3V (Operable from 1.8V to 3.8V.) Receiver sensitivity : -100 dBm (Typ.) Receiver saturation : +4 dBm (Typ.) Frequency error tolerance : >200ppm RSSI dynamic range : 100 dB RSSI accuracy : ±4 dB - Output power : -21 ~ 5 dBm - Error vector magnityde : 2% (Typ.) 6. Antenna Information - Material : FR-4 - Thickness : ½ oz - Surface Treatment : OSP < 3 페이지 > FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. End product labelling The label for end product must include “Contains FCC ID: TX4MC85A00”. “CAUTION : Exposure to Radio Frequency Radiation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users.”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Sean.Kim Company : 삼진 Create Date : 2017:12:06 16:00:13+09:00 Modify Date : 2017:12:06 17:26:00+09:00 Has XFA : No Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2017:12:06 17:26+09:00 Creator Tool : PowerPoint용 Acrobat PDFMaker 9.0 Document ID : uuid:5aee347d-6aaa-477b-be05-2cdca195b8e6 Instance ID : uuid:f8fa7fed-87b1-4bbd-9774-60e7703ab43a Format : application/pdf Title : PowerPoint 프레젠테이션 Creator : Sean.Kim Producer : Adobe PDF Library 10.0 Page Layout : SinglePage Page Count : 4EXIF Metadata provided by EXIF.tools