Remotesolution RC10A IR & RF Remote User Manual Manual

Remote Solution Co., Ltd. IR & RF Remote Manual

User Manual

Download: Remotesolution RC10A IR & RF Remote User Manual Manual
Mirror Download [FCC.gov]Remotesolution RC10A IR & RF Remote User Manual Manual
Document ID1682537
Application IDsmAzi1m9BTHsAQKAI5NfWA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize75.65kB (945644 bits)
Date Submitted2012-04-24 00:00:00
Date Available2012-04-24 00:00:00
Creation Date2012-04-19 10:50:08
Producing SoftwareGPL Ghostscript 9.04
Document Lastmod2012-04-19 10:52:33
Document TitleManual.pdf
Document CreatorPScript5.dll Version 5.2.2
Document Author: schong

Get to Know the Parts
Top of adaptor box
Front of remote
Use to pair remote
Visit xfinity.com/remotes
for programming details
Switch profiles
Navigate Home
Close and return to TV
Accept incoming calls
and access contacts
Place call on hold,
mute mic and pause camera
Go back to previous screen
Navigate and select current option
Adjust volume
Change screen layout
End call and ignore incoming call
WPS
Zoom self-view
WPS
Turn your video camera on/off
Use for wireless setup
with WPS capable
routers.
(Currently not available)
Mute your microphone
Mute call
SD Slot
Use for viewing media
(Currently not available)
Front of adaptor box
Network
Messages
Power
SD Card
Share
Rewind/Play/
Pause/Forward
Not available at
this time.
Note:
You can use this remote to turn on your
TV and/or receiver and control volume.
Visit xfinity.com/remotes to access the
XR3 Remote Control User Guide and
follow the instructions from there.
Setup
If the remote
becomes unpaired, press
and hold Setup,
then press Call
to pair again.
Back of remote
Remove tab
from battery
compartment
before use.
Network Indicator
Message Indicator
Power
Glowing LED
indicates connection
to home network.
Glowing LED indicates
new messages.
Glowing LED indicates
adaptor is on.
XFINITY® is your interface to a growing number
of new products, services and features that will
become available to you on your HDTV.
Important Information
Back of adaptor box
Ethernet
Camera
Audio
Reset
What’s in the Box
You’ll Also Need:
HDMI
TV Out
Cable In
Battery
compartment
Getting Started Guide
Ethernet
HDMI
Reset
Camera
USB
Audio
IR
Power
Messages
Power
Lock
CAPS
ALT
Press to prevent
accidental typing while
using front.
Press then release CAPS
to capitalize a letter—i.e.
press and release CAPS
then s for an upper case
S. You will need to
press/release CAPS for
each character.
Press then release
ALT for characters in
blue—i.e. press and
release ALT then Q
for 1. You will need
to press/release ALT
for each character.
Front of camera
Lens with Shutter
Shutter closes when
camera is off.
Microphones
HDMI
Cable In
The Reset button
has two functions,
depending on the
length of time held:
HDMI
TV Out
USB/IR
Ţ HDMI-capable Comcast
Power
set-top box
(Currently not
available)
Normal Reset
Insert a thin object
and hold the Reset
button for 2-5 seconds
to reboot the adaptor
and keep your
personal settings.
Camera with clip (1)
Factory Reset
Insert a thin object and
hold the Reset button
for 15 or more seconds
to delete ALL personal
settings and restore the
adaptor to the default
factory settings.
Network
Messages
Power
SD Card
Adaptor box (1)
Ţ HDTV
Remote (1)
Pull the tab from the remote’s battery
compartment before using
Microphones
least 1.5 Mbps simultaneous
upload and download speeds
(check your speeds at
http://speedtest.comcast.net)
Ţ Comcast ID
On/Off
Indicator
Glowing LED
indicates camera
is on.
Ţ Internet connection with at
Ţ Skype™ account
Clip
Adjust for
placement.
Need help? Call 877-704-7713 for assistance.
Note: This packaging has been specially designed using sustainable materials. Be kind to the
environment and re-use this box.
Power adaptor (1)
Power adaptor cable (1)
USB extension cable (1)
HDMI cable (2)
Important Information
Save time during activation by completing the
information below.
Comcast Account
You must use your Comcast ID to activate.
Please visit http://customer.comcast.com to create
more Comcast IDs.
Set Up Camera
TV Top:
Ţ
Place the front of the camera on top of your TV, with the bottom lip
resting just below the top of the screen. Push the clip down until it
touches the back of the TV and the camera is secured.
Ţ
Pivot the angle of the camera and adjust to capture your preferred
viewing area.
OR
@comcast.net
Password:
Ţ
Place the camera on your level surface with the lens facing the
viewing area.
Ţ
Hold the rubber bottom in place while pivoting the angle of the
camera to capture your preferred viewing area.
Note: The recommended viewing distance is 5' - 12'. Camera should not be
used near strong magnetic fields.
You will link your Comcast ID to a Skype account during
the TV activation process. If you don’t have a Skype
account or need to create a new one, you can do so
during activation.
Important Note for Wall-Mounted TVs
Make sure the combined weight of the camera (8.81 oz.) and TV does not
exceed the maximum rating for your wall mount. Check the wall mount
manufacturer’s manual for the maximum rating. The camera clip is not
compatible with all TV wall mounts. For wall-mounted TVs that have been
installed flush with the wall, camera placement on your TV is not
recommended due to space constraints which may result in damage to your
TV or the camera.
Password:
Important Note for Fireplace-Mounted TVs
The camera is not intended for use in high-temperature locations, such as
above fireplaces.
Home Network
If you choose to use your wireless home network, you’ll
need the following information during the TV
activation. If you have a compatible router with WiFi
Protected Setup (WPS), this will be detected and you’ll
automatically connect to your wireless network. (WPS
is currently not available)
Setup with Receiver
OR
Before you begin, please turn off your TV, set-top box and audio receiver (if using) then
disconnect the HDMI cables that are currently connecting your set-top box to your TV.
SET-TOP BOX
SET-TOP BOX
Plug an HDMI cable into the HDMI port on the back of your set-top box and the other end to
the HDMI Cable In port on your adaptor box.
Note: If you have an audio receiver, use one HDMI cable to connect your set-top box to your
receiver then use another HDMI cable to connect the receiver to your adapter box.
HDMI
Skype Account
Skype Name:
Basic Setup
Connect and Power Up
Plug a second HDMI cable to the HDMI TV Out port on your adaptor and the other end to
one of the available HDMI ports on your TV.
Flat Surface:
Username:
Plug the camera (USB) cable into the Camera port on the adaptor box. If the camera cable
isn’t long enough, use the provided USB extension cable to extend the camera cable’s reach.
DVD PLAYER
HDMI
HDMI
HDMI
GAME
CONSOLE
Decide if you want to connect to your home network using a wired Ethernet cable or
wireless connection.
Ethernet connection:
Plug a CAT-6 Ethernet cable (not provided) to the Ethernet port on the adaptor box and the
other end to an available port on your modem or router.
Wireless connection:
Skip this step and follow the instructions during TV activation.
USB
ADAPTOR BOX
USB
CAMERA
RECEIVER
If you’re using an audio receiver with an SPDIF (Optical Digital Audio) cable, disconnect this
cable from your set-top box and plug it into the Audio port on the adaptor box. Since SPDIF
only transmits audio, you’ll also have to connect via HDMI in order to see any video. We
strongly recommend using both HDMI and SPDIF cables (as depicted in the illustrat i on) to
connect your adaptor box.
HDMI
Connect the power adaptor to the power adaptor cable.
Plug the power adaptor into the Power port on the adaptor box and the power adaptor cable
to an electrical outlet. There is no actual power button on your adaptor box so this power
cable is the only way to turn the system on and off.
* SPDIF/Optical
Digital Audio
ADAPTOR BOX
HDMI
HDMI
Once everything is connected, power up the system then use your TV’s remote to select the
same HDMI input to which you’ve connected the adaptor box.
TV Top
Note: As long as your adaptor box is plugged in, it will act as a pass-through device between
your TV and your set-top box or receiver (if using).
Network Name (SSID):
Network Password (Key):
* If you don’t have an SPDIF/Optical cable, you can purchase one to
connect your receiver with the adaptor box or simply use the existing
HDMI cable to use your TV’s audio system.
Messages
Power
Set-top Box
Security Encryption Method:
(for hidden wireless networks only)
Back of TV
OR
Back of
Modem if
using Ethernet
TV
Camera
Digital Audio
Receiver
Outlet
OR
Support Information
Please visit www.comcast.com/skype for online support.
Please contact our customer care staff at 877-704-7713
for assistance with set-up and activation.
Flat Surface
TV Out
Cable In
HDMI
Ethernet
HDMI
Camera
USB
Audio
IR
Make Audio & Video Calls
If you already have an existing Skype account with contacts:
Ţ
After a few minutes, you’ll be greeted with a Welcome screen.
Please be patient during this wait as it may take up to 20 minutes.
Ţ
Go to Home > Contacts and select from the list.
Ţ
Click VIDEO CALL, AUDIO CALL or MESSAGE to connect.
Ţ
If the Welcome screen does not appear after 20 minutes, try
unplugging your device then plugging it in again or call customer
care at 877-704-7713 for assistance.
Ţ
Remove the tab from your remote’s battery compartment before
using. If the keyboard is unresponsive, see if the LOCK button is
engaged (it will glow red when you press a key). Press the LOCK
button to disengage and unlock the keyboard.
Not
available
at this
time
Reset
Once you’ve powered up, you’ll see an XFINITY screen.
Pivot Camera to
adjust view
Not
available
at this
time
Activate
Ţ
Ţ
Use your remote to complete the activation by following the
directions on your TV screen.
Ţ
You’ll be taken through a short series of screens prompting you to
check your equipment. During this time, you may be asked to run a
firmware upgrade to ensure everything is working properly.
If you’ve just set up your Skype account and don’t have any contacts yet:
Ţ
Go to Home > Contacts and select Add Contact.
Ţ
Use the keyboard to enter a Skype Name, Skype Display Name or
email address. Once your invitation to connect is accepted, the
person will appear in your Contacts. Select the person.
Ţ
Click VIDEO CALL, AUDIO CALL or MESSAGE to connect.
Power
Back of adaptor box
16983970
Need help? Call 877-704-7713 for assistance.
Please keep for future reference, but if you decide to toss, please recycle.
Getting Started Guide v.2.0
Printed in China


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2012:04:19 10:50:08+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:04:19 10:52:33+09:00
Metadata Date                   : 2012:04:19 10:52:33+09:00
Format                          : application/pdf
Creator                         : schong
Title                           : Manual.pdf
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:6345eafe-24cf-4af6-bd47-d5015d35465c
Instance ID                     : uuid:f4d4a4bb-6090-418c-95df-01939427c0d0
Has XFA                         : No
Page Count                      : 3
Creator Version                 : 14
Container Version               : 9
For                             : ȫ��,
Bounding Box                    : 221 183 605 343
Author                          : schong
Image Height                    : 160
Image Width                     : 384
Image Size                      : 384x160
Megapixels                      : 0.061
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TX4RC10A

Navigation menu