Remotesolution RH61A Touch Screen Remote Controller User Manual 2
Remote Solution Co., Ltd. Touch Screen Remote Controller 2
Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 2
I 28
Chapter 2 | Learning to Use the Menus
When the TV power turns on, press the [VERIFY] icon.
8
If all TV functions are operating, press the [EXIT] icon.
10
Press the [OK] icon to save.
Repeat steps 3~10 to set another device.
11
Use the operation buttons on the screen to conrm
TV operation.
9
OPERATING SET-UP
29 I
Chapter 2 | Learning to Use the Menus
I CODE LEARNING
OPERATING SET-UP
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
1
Press the [Settings] icon on the screen.
The [Settings] screen appears.
2
Press the [LEARN] icon on the screen.
Place remote and the original remote head to head.
3
Press the [NEXT] icon on the screen.
4
I 30
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
Select a device that you want to learn.
5
Press the button to be learned on the remote.
6
Press the button on the original remote control.
7
Press [EXIT] button to complete the procedure.
If there is a learn failure message, repeat Step 6~7 again.
8
31 I
Chapter 2 | Learning to Use the Menus
I SELECT SIGNAL BETWEEN IR/RF(Network Mode)
RF mode needs to be used together with models which are compatible with the TSR750.
(Model name : RHxx and ZRxx series)
This procedure needs to be proceeded after completing PAIRING THE REMOTE CONTROL WITH THE
RECEIVER Procedure. Otherwise, device can not be controlled through receiver.
OPERATING SET-UP
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
1
Press the [Settings] icon on the screen.
The [Settings] screen appears.
2
Select [IR/RF] on the top menu bar.
All devices are selected as IR.
: IR OUTPUT
: RF OUTPUT
3
Press a device which you like to change.
Ex) TV
4
I 32
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
The receiver connected through previous pairing
procedure is displayed.
Select a device. If you do not want, press [EXIT] button.
5
When complete, the icon of TV is changed to RF.
6
Press [EXIT] button to complete the procedure.
7
33 I
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
1
Press the [Setting] icon on the screen.
The [Setting] screen appears.
2
Select [IR/RF] on the top menu bar.
All devices are selected as IR.
: IR OUTPUT
: RF OUTPUT
3
I SELECT SIGNAL BETWEEN IR/RF (Stand_Alone Mode)
RF mode needs to be used together with models which are compatible with the TSR750.
(Model name : RHxx and ZRxx series)
Press a device which you like to change.
Ex) TV
4
I 34
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
Press [+] or [- ] to change RF Channel.
Press [OK] button to save RF channel.
5
Once it is completed, TV icon is changed to RF.
6
Press [EXIT] button to complete the procedure.
7
35 I
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
1
Press the [Setting] icon on the screen.
The [Setting] screen appears.
2
Select [NETWORK] on the top menu bar.
It will take around 15-30 sec. to join network.
3
I PAIRING THE REMOTE CONTROL WITH THE RECEIVER (Network Mode)
Receiver needs to be set up in advance according to the opearting(Network) section on the receiver
manual.
In case of success
in joining, the nd
devices procedure will
be proceeded.
4
In case of success in joining... In case of failure joining...
I 36
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
Once procedure is completed, a device is displayed.
Compare the label on the bottom of the receiver with device
name.
If not the same, Press [Update] Button.
If the same, Press [EXIT] button to finalize procedure.
5
In case that device is not found, press [Update] button.
6
Note
■ RF Freguancy Range
Ch11: 2405MHz, Ch12: 2410MHz, Ch13: 2415MHz, Ch14: 2420MHz, Ch15: 2425MHz,
Ch16: 2430MHz, Ch17: 2435MHz, Ch18: 2440MHz, Ch19: 2445MHz, Ch20: 2450MHz,
Ch21: 2455MHz, Ch22: 2460MHz, Ch23: 2465MHz, Ch24: 2470MHz, Ch25: 2475MHz,
Ch26:2480MHz (16Channel, Fc)
37 I
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I CONFIGURATION (TOUCH, EXTERNAL BUTTON SOUND Settings)
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
1
Press the [Settings] icon on the screen.
The [Settings] screen appears.
2
Press the [CONFIG] icon in the top menu bar.
3
Select the Touch or External Button to be modied, and
select a sound.
When settings are complete, press the [EXIT] icon to end.
4
I 38
Chapter 2 | Learning to Use the Menus
I PHOTO Function Buttons
PHOTO
1
ARROW Moves [UP/DOWN/LEFT/RIGHT] in the preview screen.
OK OK Opens the selected image file for viewing.
2MENU MENU Opens a preview of the image in the Picture Frame folder.
3EXIT EXIT Ends the still image screen and begins the slide mode.
4 HOME Moves to the Home screen.
5
CH , CH
CHANNEL Plays the [Next/Previous] MP3 file.
VOL , VOL
VOLUME Turns the volume of the currently playing MP3 file [Up/Down].
6 MUTE Mutes the volume of the currently playing MP3 file.
1
4
5
2 3 6
39 I
Chapter 2 | Learning to Use the Menus
I PHOTO SET-UP (SLIDE MODE)
Touching the photo image on the screen moves to the PHOTO SET-UP.
PHOTO
1 DELAY
+, - [Increases/Decreases] the delay time.
10 Displays the delay time.
2 SLIDE
MOVE Photo images appear from left to right.
IN Photo images appear from the outside edges inward to the center.
OUT Photo images appear from the center outward to the outside edges.
3 CONTINUE Saves the settings and continues viewing.
4 EXIT Ends the photo display.
3
1 2
4
I 40
Chapter 2 | Learning to Use the Menus
I PHOTO DISPLAY
PHOTO
Press the [REMOTE] icon on the screen to open
the menu.
The [PHOTO] screen appears.
1
Photo images are automatically displayed.
Any MP3 les contained in the Picture Frame folder
are also played.
2
Press the [MENU] button during display.
The image preview appears at the bottom of the
LCD screen.
3
Move the cursor via the [UP/DOWN/LEFT/RIGHT]
buttons to the image to be used in the still screen.
The corresponding image can also be touched.
4
41 I
Chapter 2 | Learning to Use the Menus
PHOTO
After selecting the desired image, press the [OK] button.
5
To end the still screen and convert to slide mode, press
the [EXIT] button.
6
Press the product’s [ ] button to end the photo mode.
The main screen appears.
7
I 42
Chapter 2 | Learning to Use the Menus
I Music File and Image File Saving
The following are instructions for using the PHOTO function of the remote control to save
image and music les.
Supported File Formats - Music Files: MP3, WAV
Image Files: BMP, JPG, PNG
PHOTO
Turn the remote control power ON, and connect it to the
PC via the USB cable.
1
When the connection is complete, the ActiveSync
program opens.
Click the [Cancel] icon in the ActiveSync screen.
2
Note
■ Please refer to the manager help to save image or music le on remote control.
43 I
Chapter 2 | Learning to Use the Menus
UTILITY
I UTILITY Main Screen
1 Calendar
2 Calculator
3 Program Version
4 Game
I 44
Chapter 2 | Learning to Use the Menus
1 Operation Icons
Moves to the next/previous month.
2 TODAY
Displays the current day.
3 EXIT
Ends the calendar function.
I Calendar
Displays the current year, month, day, and time.
UTILITY
1 2 1
3
45 I
Chapter 2 | Learning to Use the Menus
1 BackSpace
Deletes entered numbers one at a time.
2 C
Resets the input eld.
3 000
Multiplies the current number by 1000.
4 EXIT
Ends the calculator function.
I Calculator
Offers a calculator function.
UTILITY
1
2
34
1 EXIT
Ends the program version function.
I Program Version
Displays the current version of the installed program.
1
I 46
Chapter 2 | Learning to Use the Menus
1 START
Begins the PUZZLE game.
2 CONFIG
Controls the game settings.
3 SCORE
Displays the rank order of puzzle completion times.
4 EXIT
Ends the game function.
I Game
UTILITY
1
2
3
4
47 I
Chapter 2 | Learning to Use the Menus
1 Level
Selects the game difculty.
2 Number
Displays the number of the fragmented image.
3 Small Imge
Displays the image of the puzzle to be completed.
4 Image select
Selects the image to be used in the game.
5 OK
Saves the settings and returns to the main game screen.
I Game Settings
UTILITY
1
2
3
5
4
I 48
Chapter 2 | Learning to Use the Menus
I Game Instructions
Press the [UTILITY] icon on the screen to open
the menu.
The [UTILITY] screen appears.
1
UTILITY
Press the [START] icon on the main game screen.
The game begins.
3
After the puzzle image to be completed is scrambled,
the game begins.
Drag and arrange the pieces to comprise the image
shown in the upper right of the screen to nish.
To end the game at any time, press the [EXIT] icon.
4
Press the [GAME] icon on the screen.
The [GAME] screen appears.
2
49 I
Chapter 2 | Learning to Use the Menus
I SETTING Main Screen
SETTING
Press the [SETTING] icon on the screen to open
the menu.
1
The SYSTEM SET-UP screen appears.
Select the SYSTEM, START PROGRAM,
CHARGING MODE, and DIMMING MODE settings.
2
I 50
Chapter 2 | Learning to Use the Menus
SETTING
I SYSTEM
1 BRIGHTNESS
Adjusts the LCD brightness.
2 SOUND Adjusts the sound volume.
3 DATE & TIME Adjusts the current time and day/month/year.
4 LCD TIME OUT Sets the time period before the remote control is automatically
turned off.
5To modify settings, select the corresponding part, and use the [+, -] buttons to adjust.
1
2
3
4
5
51 I
Chapter 2 | Learning to Use the Menus
SETTING
I START PROGRAM
1SELECT A START
PROGRAM
Runs automatically upon product operation as set by the user.
I 52
Chapter 2 | Learning to Use the Menus
SETTING
I DISPLAY MODE SET-UP WHILE CHARGING
1SELECT A DISPLAY
OPTION
PHOTO: Runs the PHOTO function of the remote control
CLOCK: Displays the current time and year, month, day
calendar
LAST SCREEN: Keep LCD screen
TURN OFF LCD: Turns off the LCD screen
53 I
Chapter 2 | Learning to Use the Menus
SETTING
I DIMING MODE
This function dims the LCD screen after a specied amount of time to reduce glare.
1CONFIGURE THE
DIMING MODE
Turns the dimming mode ON/OFF.
2 DIMING ON TIME
Sets the time interval before automatic dimming of the remote
control LCD screen.
3 PERIOD
Sets the start time and end time for the dimming mode.
(24-hour based clock)
4To modify settings, select the corresponding part, and use the [+, -] buttons to adjust.
4
1
2
3
<OFF Screen> <ON Screen>
1